I gotta upload idea for you Dana. Hit the junkyard and walk around to a few Hondas and let us know what kind of parts you like to pull to have as extras or parts you feel like have good value for guys wanting to flip OEM parts
Idk man.. That's some trade secrets kind of thing, I don't think Dana is gonna give out the secrets. It's what keeps the hardcore enthusiasts moving forward.
Hi Static, Hoping you still read these comments. did a JDM D15 swap duel vtec, into a 1991 HF CRX. Have the Rywire harness, everythings hooked up. No resistor box due to obd1 injectors. We are not getting any injector pulse, car starts on starting fluid but wont start without it. Has spark and fuel, just seems to be an issue with the injectors not pulsing. How do we fix or trouble shoot this? have the correct ecu for it. cheers
Does anyone know what a1 and a5 go to someone tired to do my swap and cut both red and both yellow im just trying to see if there is a way I can trace down the correct wires
It looked like you put the obd0 ecu back on but in part 1 it was obd1. To make it obd1 in the cabin I would have to get a jumper harness and just plug ABC plugs into jumper then use that to plug into the obd1 ECU correct? How about wiring VTEC for D16Z6? Do you know the PIN for that? Thanks
I have a question. I’m almost done with my conversion. But I need two extra pins for c1 and c2. Where can I find them. I try and ob2 pin they look the same but won’t work. Would a 91 accord have the same pins?
I have a 1991 Honda crx it’s not an si or a hf it came automatic with a d15 in it and I’m swapping it to a b20 high comp with a manual transmission and a p28 ecu. I have to to the dpfi to mpfi conversation cause the driver side plug didn’t line up so I’m using the d series for the b series and someone told me to follow the steps but now I have to wire 4 wires in the ecu and I have an harness to line up with the harness that was plugged into the stock ecu for the d series. And now I’m stuck what I should do since it’s a different motor
Hi I have a question I have a Hf engine wire harness but its missing the female 12 pin female plug that connects to driver side...do u know what i can use that will plug in ...
hey man i have a swap b18b1 on my crx how can i het rid of the nock sensor is making my engine ligth stay on all the time i am using a p28 ecu thanks great work
Man I wish there videos were up when 10 years ago when I put together all the parts to the swap in a CRX HF. But had no clue how to wire anything and our wiring guru went to jail for 3months. So had to let it go to the junkyard for $250 cause I couldn't store it where I was at. I even gutted my old EF Si n all that shit was in the car....I wish I could go back with what I know now lol.
Can you help me out I need this how to conversion 1989 honda civic dx hatchback none obd0 to obd1 conversion harness eng f22b1 vtec conversion jumper harness to 1989 honda civic dx hatchback
So if i'm right you're using odb1 (d16z6) injectors that do not require a res box on a odb0 ecu right ? By the way, why were you looping the res box wires from injector 1 and 2?
Yea I didn’t know if it was possible always thought one would need a obd1 ecu for them injectors, yea I noticed the loop on the injectors wires too and he hooked them into the yellow wire that’s on the plug on the strut tower, resis wires it has to be going to a15 which is the resis wire that’s going to the ecu. I’ve seen others run the red wires from the injectors which is 4 individually to the ecu and noticed he ran just 2 wires in with the blue ones from the dizzy so that’s what confuses me
That first start up made it sound like it had a massive cam in it, loved it lol
Upload schedule is lit AF this week
Michael C agreed
I gotta upload idea for you Dana. Hit the junkyard and walk around to a few Hondas and let us know what kind of parts you like to pull to have as extras or parts you feel like have good value for guys wanting to flip OEM parts
Idk man.. That's some trade secrets kind of thing, I don't think Dana is gonna give out the secrets. It's what keeps the hardcore enthusiasts moving forward.
clean door panels/ interior panels, ecu's. idle air control valves.
Really cool video. I got into hondas about 2 years ago a lot of your videos have been helpful and I learned a lot.
Yeah buddy! It is purring now!
I changed my 91 Honda civic 4dsd from automatic to standard putting one Acura LS none VTech what I gotta do
Watch all the dpfi to mpfi (obd1) videos carefully
Hi Static, Hoping you still read these comments. did a JDM D15 swap duel vtec, into a 1991 HF CRX. Have the Rywire harness, everythings hooked up. No resistor box due to obd1 injectors. We are not getting any injector pulse, car starts on starting fluid but wont start without it. Has spark and fuel, just seems to be an issue with the injectors not pulsing. How do we fix or trouble shoot this? have the correct ecu for it. cheers
Yeah same problem wit my EF smh
Does anyone know what a1 and a5 go to someone tired to do my swap and cut both red and both yellow im just trying to see if there is a way I can trace down the correct wires
It looked like you put the obd0 ecu back on but in part 1 it was obd1. To make it obd1 in the cabin I would have to get a jumper harness and just plug ABC plugs into jumper then use that to plug into the obd1 ECU correct? How about wiring VTEC for D16Z6? Do you know the PIN for that? Thanks
so i aquired evo 8 rc1000s injectors i want to put them on my d16z6 build u have any info on it bro or should i just order the right ones..
sir what kind of injector ? hi or low impedance?
can i use my ecu PM5 ? thank you sir God bless
Maybe a dumb question but if I do all this and have a d16z6 head for my mini me build, do I just run a ecu jumper to run my p28 ecu and it’ll be fine
Nope..
Can i go directly from dpfi obd0 to mpfi obd1? And use whole engine harnes from obd1?
I have a question. I’m almost done with my conversion. But I need two extra pins for c1 and c2. Where can I find them. I try and ob2 pin they look the same but won’t work. Would a 91 accord have the same pins?
I have a 1991 Honda crx it’s not an si or a hf it came automatic with a d15 in it and I’m swapping it to a b20 high comp with a manual transmission and a p28 ecu. I have to to the dpfi to mpfi conversation cause the driver side plug didn’t line up so I’m using the d series for the b series and someone told me to follow the steps but now I have to wire 4 wires in the ecu and I have an harness to line up with the harness that was plugged into the stock ecu for the d series. And now I’m stuck what I should do since it’s a different motor
You use the stock engine harness and you do the mpfi conversion to it and it should plug right up to the b20 and work
annd legit. Coming with so much info bro, it's awesome thank you for doing this.
Great vids bro. You should get a seam ripper for old electrical tape you scare me with that razor blade haha
Hi I have a question I have a Hf engine wire harness but its missing the female 12 pin female plug that connects to driver side...do u know what i can use that will plug in ...
hey man i have a swap b18b1 on my crx how can i het rid of the nock sensor is making my engine ligth stay on all the time i am using a p28 ecu thanks great work
Jul M change your ecu to a non vtec ecu or chip it and remove knock sensor.
Any videos on lighting wiring. My tail lights are out and the wiring looks sketchy.
Man I wish there videos were up when 10 years ago when I put together all the parts to the swap in a CRX HF. But had no clue how to wire anything and our wiring guru went to jail for 3months. So had to let it go to the junkyard for $250 cause I couldn't store it where I was at. I even gutted my old EF Si n all that shit was in the car....I wish I could go back with what I know now lol.
@youngstatic this DIY part 1 and part 2 was helpful. I hit you up last night on Facebook messager with the clean lx blue sedan
What's it mean wen u start ur car from cold start just like u did my car sounds just like that wen I give it gas it will sound smoother .. ?
My b12 has a white/red wire am I supposed to cut it sin e there isn't supposed to be anything in that connexctor
Can you help me out I need this
how to conversion 1989 honda civic dx hatchback none obd0 to obd1 conversion harness eng f22b1 vtec conversion jumper harness to 1989 honda civic dx hatchback
How much do you charge to do all this?
Tree fiddy
i have 6 wires coming out from my si wire harness. what the other two for.
I recently done this conversion started up, no problem, no check engine, but my speedometer doesn’t work, does anyone know the reason to this??
Hope you will make one with k swap
Again D awesome video bro. Very informative.
Like the write up.... Sounds like we are playing bingo! Lol
Ahhh man Save the SOHC! Still fun to build and boost!
How much would you charge for this and for obd1 conversion?
For 88 crx dx
I’m in so cal btw
alex ruiz this video is for you to have confidence to build your own. I’m no where near socal.
alex ruiz it really is simple watch the vids on youtube
alex ruiz hey where in so cal are you I'm about to try and do this myself
So if i'm right you're using odb1 (d16z6) injectors that do not require a res box on a odb0 ecu right ?
By the way, why were you looping the res box wires from injector 1 and 2?
Yea I didn’t know if it was possible always thought one would need a obd1 ecu for them injectors, yea I noticed the loop on the injectors wires too and he hooked them into the yellow wire that’s on the plug on the strut tower, resis wires it has to be going to a15 which is the resis wire that’s going to the ecu. I’ve seen others run the red wires from the injectors which is 4 individually to the ecu and noticed he ran just 2 wires in with the blue ones from the dizzy so that’s what confuses me
hello i have a eg8 d15b2 i want to convert dpfi to mpfi how i plug the p28 ecu? my stock ecu has diferent connections
How is an Eg8 dpfi?
@@YoungStatic Eg8 is d15b2
You got my 2 thumbs up buddy good video
Obdo ecu?
Good work bro 😎😎😎👍😎👍😎👍😎👍😎👍😎👍😎🚗
hey man i just messaged you cause im stuck at a spot in the convertion
Where did you message me?
What if your B12 has a blue wire and it's not a empty slot
You can use the wire in that slot. Once you go mpfi you don’t need it’s old function anymore, it needs to be wired for what the mpfi needs
@@YoungStatic thanks bro
Yo I got a b18c1 in a 89 ef I'm lost . It's got a b16 head
Poor mans type R setup.
Thanks man
Was that a Glock with the Streamlight?!?!?
myotherlifewife lol 🤫
using pistol as a flashlight. been there man. lmao
thank u sir
That cam tho!
Will this fix my code 4 and take my car out of limp mode
still watching every vid bro just changed me u tube name didnt like the resurrection time thing sounded lame.
More.
It’s a pain in my bootyhole 😂😂😂
Stomach growl... Lmao 😅😅
First comment ayye