Just wanted to say i know exactly how you feel! I got diagnosed with cancer in October and got my surgery in January. Been on crutches ever since on the road to recovery. But that didnt stop me from pulling my b20b out the civic😁 i got a few videos if you wanna check them out! Watching your videos gives me a huge amount of inspiration to keep doing what i love!
Static your mpfi conversion videos helped me on my old hatch and even went obd1 injectors then even went full obd1 minus chassis harness you have helped me and multiple of my friends
I understand you wanna be active your work shop is part of the healing process just do minimum Bro we enjoy wot ever you put out true say we'd prefer that then you pushing back healing because you've pushed to hard to soon Bro. Love your knowledge e learn something everytime...
Accidents suck man, and I fully feel what you are saying. Myself: I was at the machine shop the 3rd day I was home from the hospital from having my appendix removed..... Could not stay in one place....
Its nice that you have those little knick knacks to keep you busy. I know it's hard being stuck in your room because of injuries. It's really not fun! Been there done that! Sending our prayers if healing from South East Asia 🙏!!!
I can relate, a while back I bought a project car and then two weeks later I broke my ankle which required surgery. I was laid out for 2-3 months with therapy juat so I could walk again. It was awful. Good luck with your recovery.
nice, this will be very useful for an upcoming little side project ive gotten myself into... healthy healing big bro, we’ll come visit you soon! #savetheEFs
Next time you do wiring you should try using some hockey grip tape instead of electrical tape it looks way nicer (IMO), easier to use and is wider. Can get 3 rolls for about $10 can get colors too if you wanted haha
I need to replace my hacked up harness on my manual MPFI swapped 89 DX. My question is, would I be able to use an automatic harness? Would I have to delete a load of stuff to make it work? I have an 89 manual wagon and there is an uncut 89 automatic LX sedan at the junkyard. Previous owner did the conversion and also did a mild tuck and it's awful. 😂
What could cause there to be no dash lights and no crank/start. Just thinking it’s weird that we are getting any dash lights to come on, only red battery light.
Anyone have any recommendations? I got a 91 ef hatch and the harness is super cut up so I can’t install an oem speedo. Does anyone have a link to the speedo clips that plug into it so I can wire a new harness or know where I can buy an aftermarket one? Thanks
I got a 95 civic coupe stock d15b7 , about a year or two ago it started overheating and smoker bad from the exhaust so i assumed the head was blown. Recently changed the head gasket because it was nasty , changed the oil put coolant in to get ready to bleed and when I turned the key it won’t stay on unless I give it gas somewhat boggy , why would you think that would happen , btw gas had ran out from me starting it here n there I put 2 gallons in and it didn’t do much but I need alil suggestions lol
Will this work a b Series obd0 swap ? I have a pr3 ecu, b16 , and two harnesses to build from ? What would you recommend in terms of getting it running?
How can I get into contact with you in a messenger or email? I'm looking for some parts to revamp my new ef project and I have saw them on your videos in the background.
(I’m sure I’m a weirdo) but has anyone ever taken an EF/EE chassis up to obd2 Seems like it could be kinda pimp…. My 1989 wagon would have a diagnostic port
I'm just gonna say I fucking tryed this from your ol video and other ppl I could not get my 91 civic hatchback dx to start on mpfi...so I ebayed out and found MONOTECH use his harness started right up no check engine lights...... Really didn't want to go that way I am a diy but I fucking could not get it running 3 days of wiring no start...... MONOTECH first try!!!
Thats because you maybe had the ckp(crank wires) with the cyp mixed up, same shit happen to too i did a wire tuck 5 years ago, and just now i got everything together and ran into the same problem got it running jow
This guys knowledge about old civics & crx's amazes me
He's the EF guru.
yes he is i want him to b series my crx
Just wanted to say i know exactly how you feel! I got diagnosed with cancer in October and got my surgery in January. Been on crutches ever since on the road to recovery. But that didnt stop me from pulling my b20b out the civic😁 i got a few videos if you wanna check them out! Watching your videos gives me a huge amount of inspiration to keep doing what i love!
I've done LS-V, Mini-Me Vtec and OBD0 to OBD1. The DPFI to MPFI is hands down the most involved conversion. Good work, nice video!
Static your mpfi conversion videos helped me on my old hatch and even went obd1 injectors then even went full obd1 minus chassis harness you have helped me and multiple of my friends
Who need diy videos when we got our boy STATICBUILT!!!
Dang last time I did a dpfi to mpfi was for a DOHC ZC into an EF Sedan. Yeeeeeeears ago now.
Damn bro u have no idea how much I needed this help. Thank you frfr
I understand you wanna be active your work shop is part of the healing process just do minimum Bro we enjoy wot ever you put out true say we'd prefer that then you pushing back healing because you've pushed to hard to soon Bro. Love your knowledge e learn something everytime...
Get better soon bro nice to see you still getting content in my number one youtuber. Much love from Austin Texas
Accidents suck man, and I fully feel what you are saying.
Myself: I was at the machine shop the 3rd day I was home from the hospital from having my appendix removed..... Could not stay in one place....
Its nice that you have those little knick knacks to keep you busy. I know it's hard being stuck in your room because of injuries. It's really not fun! Been there done that! Sending our prayers if healing from South East Asia 🙏!!!
I can relate, a while back I bought a project car and then two weeks later I broke my ankle which required surgery. I was laid out for 2-3 months with therapy juat so I could walk again. It was awful. Good luck with your recovery.
nice, this will be very useful for an upcoming little side project ive gotten myself into... healthy healing big bro, we’ll come visit you soon!
#savetheEFs
Glad you are keeping busy Dana.
Get well soon papa. Thanks for the dope info as usual! Much love from Milwaukee, WI
This looks like something that can easily go south if not precisely careful
Yessa hawaii 808 in the house
Keeping busy! I feel you man I broke my foot and was freakin restless for like 3 months. Take it easy man👍
Dana the man the myth the legend. Stay wrenching my dude.
#EfGang
Really appreciate still bringing that 🔥 content brother 💯👍
Next time you do wiring you should try using some hockey grip tape instead of electrical tape it looks way nicer (IMO), easier to use and is wider. Can get 3 rolls for about $10 can get colors too if you wanted haha
Who needs google when you got this channel
That’s exactly how i bee feeling a lot when i dont feel like being in my room i wanna be in the garage
You have special gift ys . Keep the content commin big dog .
I need to replace my hacked up harness on my manual MPFI swapped 89 DX. My question is, would I be able to use an automatic harness? Would I have to delete a load of stuff to make it work?
I have an 89 manual wagon and there is an uncut 89 automatic LX sedan at the junkyard.
Previous owner did the conversion and also did a mild tuck and it's awful. 😂
What could cause there to be no dash lights and no crank/start. Just thinking it’s weird that we are getting any dash lights to come on, only red battery light.
Hey brotha I’m doing this swap with the z6 intake . Can I use the 1993 to 1997 del sol throttle cable ?
yo man hope you get to feeling better take your time and heel up right how is your friend after all this hope he is all good
Anyone have any recommendations? I got a 91 ef hatch and the harness is super cut up so I can’t install an oem speedo. Does anyone have a link to the speedo clips that plug into it so I can wire a new harness or know where I can buy an aftermarket one? Thanks
Someone seling a oem dash harness on ebay for $35 bucks plus shipping
@@DJV94022 Do you by any chance have a link? I can’t seem to find it.
I got a 95 civic coupe stock d15b7 , about a year or two ago it started overheating and smoker bad from the exhaust so i assumed the head was blown. Recently changed the head gasket because it was nasty , changed the oil put coolant in to get ready to bleed and when I turned the key it won’t stay on unless I give it gas somewhat boggy , why would you think that would happen , btw gas had ran out from me starting it here n there I put 2 gallons in and it didn’t do much but I need alil suggestions lol
wats up bro i did this harness and i’m getting cyp code can u help me out
do i need resistorbox when i do (obd0 dpfi>obd1 mpfi
Hope u doing well, I want to ask u what mods can I do to a 03 civic for more horsepower and for handling something nice
This is pooky paper I really hope you feel better God bless you my brother 🙏🙏🙏🙏🙏
Will this work a b Series obd0 swap ? I have a pr3 ecu, b16 , and two harnesses to build from ? What would you recommend in terms of getting it running?
I was listening to ya but I got lost, but I herd ya, ggz get well homie
Yes sirrrrrr
How much for a Obd0 Dpfi - Mpfi - Obd1 Harness? @YoungStatic
Are the harness the same for auto and standard?
YEEAAAHHHH
How much you charge to do that conversion?
I watch every video
If I pay you will you make my efsi all-wheel drive I'm out here in the bay too
You have the injector colors all different in all the videos why ppl keep messing up, its confusing lol
Disconnectable translated to Desconectable.
So I guess it is a word ✌🏼
How can I get into contact with you in a messenger or email? I'm looking for some parts to revamp my new ef project and I have saw them on your videos in the background.
Love workin in the garage until you have to drop a gas tank twice because of bad parts from the factory 4 days of stinkin gas
(I’m sure I’m a weirdo) but has anyone ever taken an EF/EE chassis up to obd2
Seems like it could be kinda pimp…. My 1989 wagon would have a diagnostic port
Quick? I would say intense and built to virtually the same OEM wiring.
💯
Erwin Spurs
Cummings Road
I'm just gonna say I fucking tryed this from your ol video and other ppl I could not get my 91 civic hatchback dx to start on mpfi...so I ebayed out and found MONOTECH use his harness started right up no check engine lights...... Really didn't want to go that way I am a diy but I fucking could not get it running 3 days of wiring no start...... MONOTECH first try!!!
Thats because you maybe had the ckp(crank wires) with the cyp mixed up, same shit happen to too i did a wire tuck 5 years ago, and just now i got everything together and ran into the same problem got it running jow
👍👍👍🌵🌵🌵
Yo tapareezworkshop
Wat I miss?? Wat the hell happened bro?
When you start talking about the wiring process, it’s all mumbo jumbo. This is one of my weaker areas I need to work on tho :(
I had a horrible experience with maxpeedingrods and they refused to fix it without way too much hassle and high extra fees. Cheap crap is cheap crap