HOW TO BUILD A GARDEN SHED: DOORS, ROOF PANELS AND OSMO OIL | Extension Build #21 | Build with A&E
HTML-код
- Опубликовано: 13 сен 2024
- In this final episode of how to build a garden shed, John demonstrates how to install shed doors and how to secure the roof panels. He showcases the cedar cladding for the perimeter of the shed, builds a wood panel above the door, and gives us a tour of the completed garden shed. John shows us how to use a hinge drill to locate the centre of the hinge and drill in the door. He also shows us how to disguise bins with a secret cedar door, and how to protect the wood using Osmo UV oil. Watch for top tips, satisfying time lapses, and the finished garden shed!
A huge thank you to our show sponsors, MKM Building Supplies. We highly recommend you check out their website for all your construction material needs!
- www.mkmbs.co.uk
PLEASE NOTE: we’ll endeavour to answer questions and comments as soon as possible depending on work schedules.
_________________________________
For all our socials! ▶linktr.ee/buil...
Music from Epidemic Sound
_________________________________
#construction #homebuilding #building
That shed is built better than my new build house.
It will be though..)
@@bobmartin5101 I dont get it sorry, why would it be better? Thanks in advance 👍
@@NS-uq3pp Hi there,
In my own purchasing experience, new build homes by the big British housebuilders are largely sub-standard in quality. There are a few exceptions of course, but the majority of new housing developments by companies like Persimmon, Bellway, Barratt are just plain rubbish. NHBC are even refusing to honour guarantees in a vast majority of these homes.
@@bobmartin5101 I'm with you now mate, and totally agree... I see a lot of these 'Not my job!' vids going viral and the work quality is shockingly bad.
Same here.
Good Morning John and the A&E team.
May i compliment yourselves for posting the videos for us the viewing public to view, thank you.
It is a pleasure to watch everytime and i wait in anticipation to every video.
I most admire your exemplary standard of work, the attention to detail and sense of humour.
Individually and collectively you are a fine example of a time-honoured trade, one which, had i not chosen a different career, would have pursued.
May you all be granted health and continue to be contracted for many years to come.
Thank you all.
Hi Anait thanks for your kind words, awesome teamwork from everyone makes it all possible thanks for watching all the best Tony 👍 have a awesome weekend
Great craftsmanship. It's hard to find a builder(s) that put in as much effort into things as these guys !
We love what we do and for it too be noticed is awesome. Thanks for watching Josh :)
Lots of capable builders out there but it’s the smallest of little details that amazes me with these videos. Cracking job lads 👏🏽
Hi Ash thank for your kind words, details are everything, I must confess I have seen many crafts people with detail of finish but I do seem to notice they are the men and ladies who have passion for their trade thanks for watching all the best Tony 👍 have a awesome weekend
Shed?! That's a cute, narrow home...just needs a bed, shower and a loo (already has a sink). Love it!
Glad you enjoyed the video Juliet! Take care 😊👍
Astonishingly beautiful "shed"built by skill builders doing quality work.Thank you for allowing us to tag along.
Hi Maria thanks for your kind words but I have to say it is a privilege and honour to have all you awesome people with us on this journey thanks for watching all the best Tony 👍 have a awesome weekend
It’s bad when someone’s shed is nicer than your house.
Placing the locks where the mortice and tenant not going to weakened the door? Nice build, music by epidemic, how apropiate 😀😀
Hi Rubi quite correct you could argue the point on both sides quite easily, but the minimum of effect is nothing and long term it will out last any dowelled door and if the lock is fitted correctly so you don’t take out unnecessary timber it will be fine or the other way to look at it I’ve fitted doors like this for 35 years and never had a problem only with dowelled doors thanks for watching all the best Tony 👍have a awesome weekend
now that was a great job and a Finnish by everyone and I think the job and shed was very practical to the house nice one
Glad you enjoyed it bud, have an awesome week 👍
Great Contact really Enjoyed watching guys . 👍👊
Glad you enjoyed it Jensen! 👍
Wow... just wow.
Really enjoyed this series. I want to do similar but it will go over the permitted development height so not worth it in the immediate future
The skill and craftsmanship is amazing. Lining up those doors! Wow. If I didn’t need to earn money, I bet a free apprenticeship with you guys for 6 months would be a masterclass!
Thanks Paul for the support, more videos on there way which we hope you will enjoy
Your client should be pleased with the shed. Craftsmanship on point! Hope the doesn't open blow open against the glass👍🏻
Watching from Norway. Wicked videos! Have binge-watched all of these extension projects. Good concise commentary and then right into time-lapse. Perfect. Onboard for more. Cheers, Scott
Really top notch work. Not many people take the care you lot do, especially on an outdoor shelter! Great work as always and best of luck with the channel.
Hi POUSE around the HOUSE thanks for your kind words, awesome team work thanks for watching all the best Tony 👍 have a awesome weekend
To finish it off you should have Clad the roof timbers with the cedar wood
Hi voodoo audio it was all down to cost thanks for watching all the best Tony 👍
really very well done. who would of thought a side passage could look so good
Hi Dan thanks for your kind words, have a awesome weekend thanks for watching all the best Tony 👍
The quality of your and your teams work looks fantastic, the attention to detail is something you don’t see too often these days, you really do want to do the best you can well done 👍
Hi dord1954 thanks for your kind words, awesome teamwork that makes everything possible thanks for watching all the best Tony 👍 have a awesome weekend
Good to see great attention to detail and quality workmanship 👍
Thanks Paul much appreciated awesome team work thanks for watching all the best Tony 👍 have a awesome weekend
What a shed John! Nice work brother. Attention to detail is unreal. Thanks for filming 👍🏼👌🏼🏴
No worries, glad you enjoyed the video bud - take care! 👍
I was looking forward to seeing it, you've done a great job!
Hi Geek Street thanks for your kind words glad you enjoyed the video all the best Tony 👍 have a awesome weekend
@@BuildWithAE Thanks you too!
Beautiful job as ever chaps 👌🏼🧱👍🏽
Thanks guys! take care 👍
Build With A&E 🧱👍🏽
Now that is something else😍 well done all involved, looks mega!! Great job👍🏽
Thanks Kieren hope you are well did you try the software at all, thanks for watching all the best Tony 👍 have a awesome weekend anyone who reads this comment please check out Kieren channel above cool channel 👍
Build With A&E I’ll be honest mate I haven’t had the time, I’ve been meaning to!! I’ll get on it as soon as I can, thanks for all the support, it means a lot tony!!👍🏽🔨
That is a stunning job. Great craftsmanship and quality work . Respect and regards to all the team.
Hi Johnny thanks for your kind words awesome team work thanks for watching all the best Tony 👍 have a awesome weekend
Theres was me being greedy and thinking you were going to show us how you made the door lol .. amazing work as always lads
Hi DJ C this will be one of the things we are looking into at the moment showing more joinery in the shop. Thanks for watching all the best Tony 👍have a awesome weekend
Been hooked in all your content since I stumbled upon your channel. This side build is exactly what we want at ours. Thank you. Top class work as usual 👍🏽🌟🌟🌟🌟🌟
Hi Johnson22 thanks for your kind words glad you are enjoying the channel all the best Tony 👍
Great attention to detail as always that must be the poshest shed and most expensive shed that I have seen but great craftsmanship guys take care
Thanks Kenny 👍
Epic quality build. Bring that man some cake.
Haha thanks Bob! Take care 👍
Turned out stunning mate, you have a cracking team around you
Its all about teamwork, thanks for the support !
Fantastic attention to detail, well done guys
Hi Matthew thanks for your kind words have a awesome weekend all the best Tony 👍
Thats how its done top job
Great use of the space and looks tip top too. Another idea I'm "borrowing" from A&E. 👍
Hi JRS thanks much appreciated glad we could help in ideas, that’s one of the things I love about RUclips thanks for watching all the best Tony 👍 have a awesome weekend
Such great work. Well filmed and edited too.
10/10
Hi David thanks for your kind words Tom and Clare are so total creative awesome people thanks for watching all the best Tony 👍 have a awesome weekend
I concur. Absolutely amazing.
Thanks for the support and kind words :)
Best shed I’ve ever seen. Fantastic job!
Thanks A Mac, take care 👍
Stunning as always!
Thank you Jason ! 😊
Looks brilliant, great job 👍👍👍
Thank you so much 😀
Great looking shed keep up the good work excellent video 👍👍👍👍
Thanks Isabel hope you are all well have a awesome weekend thanks Tony 👍
Quality. Not sure a shed is the correct description but probably keeps you ok with planning.
Amazing series - loads of ideas for future renovations. Will you do a completed extension renovation vlog when finished? Also, the cat flap exits the house into the 'shed'... how does the cat get out of the shed if the doors are shut (are the owners are out)? A second cat flap?
The skill with that router doing the hinges is so impressive. I don’t get how you get it so accurate without a template/jig.
I do it exactly the same just don’t try and route to the line leave a mil or 2 then finish with the chisel 👍
Hi John, Jake is spot on use light weight router makes life easy, the lads laugh at me I still use my chisels to tight to buy a small handheld router 😂 thanks for watching all the best Tony 👍 have a awesome weekend
experience with the wood helps a lot too. speed of router, quality of bit, some woods cut through like butter, others are tough and bind do the bit.
Looks fantastic! 👌
Thanks for watching Black Tea, have a great day 👍
Very very nice - wish you would travel to Northampton
Another great job👍🏻👍🏻
Hi GamingHorizon much appreciated thanks for watching all the best Tony 👍 have a awesome weekend
Quality work boys, I love your attention to detail, spot on - so many times I come across clients who want a million dollar job but want to pay penny’s for it - as I keep telling my clients quality don’t come cheap!!👌
Hi Andy,
Glad you enjoyed the video.
Unfortunately many people don't realise just how expensive quality materials are. You definitely get what you pay for with all aspects of building!
Thanks for watching.
All the best, John 😊
Absolutely su-perb ! Masterpiece, everything lining up spot on, no gaps, no nothing, tight as a ship👍👍👍
Thanks Dan awesome teamwork thanks for watching all the best Tony 👍 have a awesome weekend
Nice job lovely box gutter detail iv never thought of using epdm and iv done s%€t loads of them,It's a shame the rafters were not cladded but you have to draw the line some where,I don't know why people are getting there knickers in a twist over a posh shed, It's seen from the front and rear it's obviously an affluent area and built for people who like the best,And I think you have achieved that,It's nice to work with clients that want to raise the spec rather than seeing what can be cut out.Well done mate
Hi Dean thanks for your kind words, great product epdm in certain locations thanks for watching all the best Tony 👍 have a awesome weekend
Amazing work.
Thanks buddy hope you are all well all the best Tony 👍 have a awesome weekend
Awesome as always 👌🏼
Thanks Marty have a awesome weekend all the best Tony 👍
I was just wondering about the raised part of the shed. Is there still a fall for rain water? I couldn’t quite see from the video. Great job all the same.
Why didnt you put the lock in between the tenons? isn't that why the middle is done like that. You must of weakened the joint by doing it like that, only reason I can think of is to match the handle height off another door
Hi Kenny quite correct you could argue the point on both sides quite easily, but the minimum of effect is nothing and long term it will out last any dowelled door and if the lock is fitted correctly so you don’t take out unnecessary timber it will be fine or the other way to look at it I’ve fitted doors like this for 35 years and never had a problem only with dowelled doors thanks for watching all the best Tony 👍have a awesome weekend
Looks amazing, quick question. What did you use to seal where the shed roof runs into the brickwork to stop water running down the bricks and behind the timber?
Nice job, thought went into it. The only question is why didn't you clad the tantalized timber rafters .
Hi jamoco1,
Glad you enjoyed the video.
We decided not to clad the rafters as you have to draw the line somewhere. As both end panels were cladded, it made sense to clad the gutter.
Hope this helps.
All the best, John 😊
Damn from what I saw you have quite a nice house
VERY GOOD, I LOVE YOUR VIDEO
Thank you very much!
Lovely job. Where did you buy the cedar from?
Great work
Thanks Aiyic have a awesome weekend all the best Tony 👍
Should have stained the rafters to match cedar
Hi b21Playa I wanted them to stand alone, the other alternative was cedar but you have to draw the line some were thanks for watching all the best Tony 👍 have a awesome weekend
Build With A&E
Yes I guess that’s true, keep up the good work, looks brilliant none the less. Can’t wait for the next update in the regency build 👍
Im struggling to find anyone half competent to do this for me in Leicester. Absolutely stunning, would you consider a job in Leicester? Not far from you. Mohammad.
Hi Mohammad try the FMB on google they will help you we are 12 months booked thanks for watching all the best Tony 👍 have a awesome weekend
nice neat work....
Thanks TERM14 have a awesome weekend all the best Tony 👍
Craftsman!
Thanks wamgoc have a awesome weekend all the best Tony 👍
Look fantastic - Did you use normal lead flashing at the back of the poly carb roof panels? I can see the channel has been cut into the mortar, not sure if you used a plastic replacement?
It shows the flashing already installed in #20. You can watch from 12:13 in this video to see what it looks like.
ruclips.net/video/Oom9gzHAzQ0/видео.html
Looks amazing ,just wondering if that roof is noisy when it rains? Thinking about building a similar roof on the side of my house.
Hi Ryan H,
It does make a noise when it rains, but the amount of noise will depend on what is in the shed / area underneath it, as any echo could make it appear louder.
Hope this helps.
All the best, John 😊
Great job 👏 was curious to know if this could be down with glass panels Instead of polycarbonate? Is the process the same?
Hi Dan,
Glad you enjoyed the video.
There's no reason why you couldn't use glass. There would be some things to consider though -
Glass is much heavier than polycarbonate, so make sure the rafters can support the weight (also bear in mind snow load).
You would need an adequate frame to install the glass into. Have a chat with a local glazing firm, and they can advise you on available options.
Hope this helps.
All the best, John 😊
Love it! quick question why didn’t you stain the rafters to match the cladding does the cls not take the stain very well?
Hi Jake great question I wanted them to stand alone because of not being cedar, I don’t think it was cls it was treated timber which never looks right being stained that’s my personal opinion thanks for watching all the best Tony 👍 have a awesome weekend
Build With A&E owww sound, cheers for the reply keep up the good work men👍
What doorstop to prevent that handle from hitting the glass?
So it’s been over a year now, how have you found the shed? With it being close to the wall how has it done with the weather? How has the bricks done with water being drained into them? The reason am asking is I want to build the same shed as you but the other side brick is the neighbours garage wall so water would be draining into their wall and I don’t want it to collapse over the gears from water being drained into their garage wall etc
Hey buddy it looks brand new still it looks beautiful 🤩
Onulina trasparente
I would live in that 😂
Thanks for watching! 👍
Is the wall plate fixed to a party wall??
Hi dave s,
One wall plate is fixed to the external wall of the clients house, and the other is on the boundary wall.
Hope this helps.
All the best, John
beautiful job guys , will the cedar go a silvery colour ?
Hi Davy B,
Glad you like it 😁
Over time the cedar will turn silvery colour, it's a beautiful wood type which is perfect for this type of application.
Thanks for watching.
All the best, John 😊
Does that roof support snow loads without having to take the snow off during winter? Thanks
Hi stephiso,
Yes, the roof will be more than adequate to cope with snow loads.
Hope this helps.
All the best, John 😊
Would of looked a million times better if it was tiled
Wallace C1 But it would end up being really dark.
Excellent job, loving this channel. Just wondered is that British cedar or western red ? Cheers
Hi Nathan,
Glad you enjoyed the video.
We used Western Red Cedar for the build 😁
All the best, John 😊
Build With A&E thanks 🙏
No problem 😁
Hi what flashing did you use
Hi Tim Emm,
Check out this video - ruclips.net/video/Oom9gzHAzQ0/видео.html and you can see exactly what we used 😁
All the best, John 😊
Great work but not sure about the fixed panel over the bin door , how many times is someone going to twat their head on that lol
Hi Chris 😂 thanks for watching all the best Tony 👍 have a awesome weekend
How do I get in touch with you please? I have some questions about a similar (but wider) project I want to do.
Email 👍
Job in the town
Thanks jlewis have a awesome weekend all the best Tony 👍
Looks really stunning I'm not asking just imaging what the cost of sutch a shed is the woods not cheap then there's the rest of the gear plus the Labour £££££££ 👀👍👌👏👏👏
It's looks like a pretty expensive area to live so I'm sure the price won't cost the owner much sleep.
Just wondering how much it all cost a customer?
Thanks for watching Robert, unfortunately we're unable to discuss prices due to client confidentiality. Take care 👍
Did the owners have to get building permission for this?
This is my first video I watch on your channel. You’re a true craftsman, nice clean work with details. You rock. Only annoying thing watching your vids is that you talk like a teenager. The doooooor, that’s iiiiiit, in hereeeeee. I don’t say you need to change, I just can’t listen to it 🤨
Hi Patrick P,
Glad you enjoyed the video.
Please bear in mind that I am a builder, not a TV presenter. I try my up most to be as informative as possible when filming, which means that sometimes I may string my words out slightly as I'm thinking about what to say.
This has been raised by a few people before, and although I do appreciate constructive criticism, I also urge those people to have a go for themselves and see how easy they find it.
Please don't see this as a negative response to your comment, I'm just trying to get my point across.
Thanks for taking the time to watch the video.
All the best, John
Quality shed, though the term shed doesn't really do it justice 👌
Thanks for watching Mark, take care! 👍
Bit gutted you didn't cover the drainage.
Hi Arthur Balls,
Check out this video - ruclips.net/video/xsrNCCF3AI4/видео.html
We show the whole installation process.
All the best, John 😊
@@BuildWithAE nice video, cheers buddy
Jobs a good’en
The title is incorrect. That’s no shed, but a man cave!
Hi So true all the best Tony 👍
Can u get away with just ceiling it and not doing the led work ? I’m looking at doing the same thing not the best with diy lol
I'm assuming you're referring to the lead flashing from wall to roof? If so, you could use flashband, which is a self adhesive strip you can use instead of lead. It does have a much lower lifespan than lead though. Also make sure you follow the manufacturer's instructions to the letter to ensure that it sticks and seals properly!
Hope this helps.
All the best, John 😊
Sorry guys, but not for me.
I appreciate the skill, but so much about this build just seems to be over-engineered. Is that the client or the contractor? Who knows.
Craftsmanship can always be appreciated. But is that required for a shed, and...a bin store? It just screams ostentatious.
As I say, not knocking your work. Or your skill. Both top drawer. I’ve just found this series painful to watch. Wouldn’t copy any of it 🤷♂️
Hi D L I think that’s the great thing about people we all have different ideas, the clients wanted something to compliment the rest of the build but in the same shape as the old one. Thanks for watching all the best Tony 👍 have a awesome weekend
Build With A&E | Oh no, trust me I get the design brief. The clients wanted something as equally ostentatious and pointless as the rest of their build; something manicured to impress on Instagram. You delivered magnificently 👍
You are right. People are full of ideas. I guess I’m just glad mine don’t include needing the slats on my bin store to be in perfect alignment. God help their mental health when it all starts to weather. The anguish will be unbearable.
@@imconfused1237 jealous much!? Looks like someone's got shed envy ;)
Paul Hinton | I’ve self-built 3 houses from trench to ridge tile. Have you? As for my ‘shed’, it’s a double garage which houses a limited edition 911 along with a few other toys.
But yes. You’ve nailed it. Questioning the point of over engineering in scenarios which do not justify it, is clearly just my uncontainable jealousy eating my very core 👍
This is why I’ve been having sleepless nights.
@@imconfused1237 the only thing giving you sleepless nights is that massive chip on your shoulder! I might not of built any houses but I know quality when I see it. And because they got the cladding to line up with the doors makes it ostentatious? Have a word. Maybe they just want to do things to a high standard
Great vid as always
Thanks for watching Lewis 👍