2 10S TRUCK BLOWTHROUGH BUILD
HTML-код
- Опубликовано: 10 май 2020
- Nice Truck Blowthrough build to give you a walkaround of all the equipment and a demo with flex everywhere!
Subscribe w/ Notification Bell for Daily Bass Videos! 👍 🔊
2 Skar SDR 10s
Skar Subwoofers
2 to 1 ratio 6th order
Single rp 1500.1 skar 1500 watt amp at 1 ohm
Back Tuned to 20Hz
Front Tuned to 45Hz
3 Cubes Back Chamber
6 Cubes Front Chamber
Metered 143.7db at 27Hz
Truck 6th order blowthrough
truck blowthrough glass
6th Order blowthru build 2 10s
two 10s build with bandpass box
Pioneer Dual Unit Stereo
Skar Audio
10" Subwoofers
6th order bandpass build
Show: Slamfest Audio Show 2019
📰COMMENT what you think!
👍LIKE if you Enjoyed it!
🔗SHARE to your friends if it's worth sharing!
🔔SUBSCRIBE if you haven't!
Instagram: / jacobviral
Facebook: / jacobviral
FB Group: / jacobviral
Profile: / jacob.lindsey.927
2nd Channel: / jacobviral2
Fiance's Channel: / jessicaviral
I do not own the rights to any of the music used in this video Авто/Мото
Funny thing i just meet up with this dude a few weeks ago and bought his skar 1500 off him..since this video he has upgraded to a dc lvl 4 18 on a taramps smart 3k..with the same design of box and all i got to say was wow!!! I was blown away by how good it sounded for 1 18 on low power..i never herd the 10s..but from the looks of this video they were slamming..
I just got my smart 3 and it pulls 350amps. Not exactly low power but damn it's a small package
Never thought about this for my tacoma. Guess I need to get a topper now.
That damn paper airplanes was breathy af! Nice.
It hits and that port threw the window was a good 💡
I too did a blow thru using the siding rear window in my 2000 ext cab z71.But I had come up from a old style toolbox that had been lengthened to 1" from the bottom of the bed. I had used 3/4" clear plexiglass to "funnel" the bass into the cab. I had 2 -Audiopipe 12s each in their own 3.0 ported box nesseled inside the tool box. It was amazed as well as those that get to listen to it. You heard absolutely no rattles, no vibrations, only bass notes coming thru the sliding rear window. It was awesome.
What up taco!!! Awesome to see your build on here. Awesome Jacob
This is freaking cool. Awesome build brotha.
Very, very impressive👊🏾👊🏾👊🏾I salute u bro for that design... #BassOn #SkarredMyself
Came back with this box earlier this year, went with some VFL 10s on a VFL comp 3k and was doing 143 at 20hz and right at 148dB on music. Doing double hairtricks under 30hz after they got broke-in lmao
Had never thought of that
NICE VID BRO!!!
impressive
Yeah man yeah
Dope
Repping xclsv. Hell yeah
@Elijah Dossett half of what he uploads isnt his rebass's. i know the guy.
@whatinthefuck shitniggadawg damn right.
Nice job!!!
Thank u
Nice ik who this build belongs too he has a single dc audio 15 or 18 on a taramps smart 3k
Something telling me he was starting to make a walk threw but couldn't find anyone to cut the back of the cab off so he improvised. I love the commitment 👍
Im doing something similar with a camper shell on the truck any advice would be great im trying to get the 3 15’s to sound good but its not working out any help would be great thank you
I'm going to wall 2-6x9's in my suburban just because I can.
And they better be the industry standard...Sony Explodes.
@@mrbrowz1000101 Naw man dual's from Death-Mart.
👍👌
customer want me to build his beautiful 09 3500 ram dually but i refused to blow through such a nice truck i told him about doing it this way but we might boot the whole window
I have the Svr 10s at one ohm on the same amp. Mine are rated for more power than yours except yours hit way harder and mine barely hit and when I push them they make popping sounds
I have 2sdr 10s on a rp 2k in my Acura
D4 or D2 ? I got that setup but mines is a rp1500 ur overpowering them but they might handle it for a while tbh
I’m wanting to do the same blow through with my slide glass. But how do you water proof the sliding glass.?? I’m new to a blow through like this…..any help would be great…..
Alot use silicon/foam and rubber sealing materials similar to what sealed our windows but larger.
@@JacobViral Ty
Not sure where you live but there’s a car show in Easley SC. Tomorrow 5 PM till 10 “big boys country Cookin. “ The club Im in is Teambassheads ” Club founder Wendell Kelly. If by chance you’re ever down this way or around Greer or Easley area It be cool to have you there.
@@Burgerdog75 live near Savannah, Georgia. Thanks for invite little far from me. Shows I’ll be at hopefully in SC: Battle of the States: October 15-16 Stephens, SC
Ruckus & Chill: November 12/13 Fayetteville NC
Does that guy have a RUclips or something? I got an 06 Tacoma access cab and was wanting to do the same thing
Right here bro, hmu with any questions you got
I want to do a blowthrough in my window like this. On my f150. I didnt want to cut the bed of my truck. I'm trying to do this with 4 10s. Any ideas on the design #jacobviral
Im currently about to start on a blow through in my f150 with 4 10s. I have 2 10s now in a downfiring underseat box an its just not enough anymore
I’m gunna give an honest opinion and say great idea 100% however I feel this has a ton of room for improvement with numbers at only 143-145dB with how much room you using. I see broken windows and 155s in this build great job man
Dan Valente yeah I am running a single DC xl18 on 3kw and it’s close to a 150. With that box I’ll need to shrink the rear chamber and raise the tuning so it’ll have more output at the 35hz peak.
You on ig?
Dan Valente yeah man, @loud_n_low_taco
Did he say SDR's wow that is bad A.
Whats the first song name?
Yo gotti f u
Thank you sir
#NVX
Kinda defeats the purpose of putting the subs through the window when the amps are on the floor in the back seat. Why not put them in the bed to keep the back seat open for passengers? The only other thing I would have done is paint that port black. Kinda looks unfinished. Other than that, awesome job
Very impressive for 200$ worth of subs
Thank u
Loud_n_low Taco this is your build?
Tido Bass yup
Share the specs wanna bass too
sdr lmaoooooooooooooooooooooooooooooooooooooooo
It's raining again pay it doesn't matter what time it is either I'm down here in Florida where you're at at least we're from I don't know where you're at now but please hit me back are you my phone number I'm not a weirdo stalker or anything like that I just want to get some good information you know
Play Jacob I've been bumping music a long time but I just been putting random s*** together you know what I mean not random is in Pioneer with Kenwood with audio stream I've been putting Brands together but I haven't been doing it right you know where the speakers are that say papon capable or at least I think they are when they're only too well capable and a bridge The Ant and drop it down to half ohm if you just please get back to me I'll give you my phone number so you can personally call me and we can talk I got a system going to wire a lot and I don't have really the slightest on how to really do it I mean don't get me wrong I can wire it up but is it right or not then is it going to clip out that for about an hour of working listening you know just please hit me up
Message me on Facebook or Instagram Jacob vital 👍
Sorry Jacob this time video sucked
It was horrendous.....NO video of (working) enclosure.....sound quality when there was sound was crap....1/4 to 1/3 of video NO sound ...