How we built our own barn doors!

Watch as we take you through the step-by-step process of how we built our very own barn doors from scratch. In this video, we'll show you how to create double barn doors using Winsoon barn door hardware, perfect for adding a touch of modern or rustic charm to any space. Whether you're looking to build heavy duty barn doors or simply want to try your hand at a DIY project, our cedar picket projects will guide you through the easy process of making your own barn doors. Say goodbye to traditional doors and hello to the beauty and functionality of custom barn doors!
Link to similar single barn door project: • How to Make a Sliding ...
Additional plans for DIY projects can be found at www.diypete.co...
Project cost when built:
Steel: 3/16 inch thick 2 inch flat bar - $15 per 10 foot piece. ( 4 pieces necessary ) $60.00
Pickets: 23 @ $3.97/picket - $91
OSB: $28
Barn Door hardware: $89 amzn.to/3HVktBn
Barn Door bottom guide: $20 amzn.to/49w3C3M
Barn Door recessed handles: $20 per 2 pack. $40 total for all 4 handles amzn.to/3wcSFWD
Total wood and metal cost: $179
Total hardware cost: $149
Total for wood/metal and hardware: $328
- Extra costs will be for nails, screws, paint, backerboard, glue, etc.
Instagram: / diypete
Facebook: / diyprojectswithpete
Mail can be sent to our mailing address below:
DIYPETE.com
1627 W Main Street Suite 182
Bozeman, Montana 59715
All music used in this video is licensed through:
Music By Endless Noise (www.endlessnoise.com) - If you are a creator, I'd highly recommend their bank of music.

[@denvernow7294]

Amazing job! I would put a few very low profile rubber bumpers for when the doors close so they don't clang each other and cause wear on the spray paint.

[@DIYPETE]

Thanks for the ideas! The top stoppers do work well for stopping them before they hit, but I do think some low profile bumpers on the sides of the doors would be great to ensure they never bump and if they do that it doesn't scratch paint or make noise. Thanks!

[@denvernow7294]

@@DIYPETE the top bumpers stop them from hitting each other when they close?

[@DIYPETE]

The "stops" on the rail prevent the door from going to far and thus prevent it from hitting the door at the center. They are "L" shaped metal pieces at the center, and they have a little rubber piece on them as well. Cheers!@@denvernow7294

[@denvernow7294]

@@DIYPETE ahhh, I didnt know they had outside and inside bumpers. Good setup. Beautiful build. 🤟

[@joerobinson9971]

I love barn doors. My son is building an ADU on the back part of our property, one of the openings is perfect for the door. Thanks, Pete

[@MCsCreations]

Beautiful work, Pete! The doors really look great! 😃
(And also sounds great... If you know the band. 😬)
Anyway, stay safe there with your family! 🖖😊

[@DIYPETE]

Always great to hear from you! Cheers!

[@fynbo1007]

Looking just amazing, thank you for sharing your videos. God bless you and your family.

[@DIYPETE]

Thanks for watching! Take care and hope your family doing well.

[@Scriptor13]

Another great detailed video, Pete--saved and shared. Thanks!

[@DIYPETE]

Thanks so much! Hope you are having a great weekend! cheers

[@Scriptor13]

@@DIYPETE I am, thank you! I hope you are too! 🎉👍😊

[@tommyblueeyes6892]

That was super cool dude

[@DIYPETE]

Thanks for watching! Hope all your projects are going well!

[@zstewart123]

sweet, just what I was looking for. The master bath door sucked. was in the way anyway you hung it. This will rock.

[@DIYPETE]

I hear ya on figuring out doors for small spaces! Have fun with the project, looking forward to hearing how it turns out!

[@lerasmith1264]

This was a lot of work, equipment and skills. Unfortunately not many people can do it themselves

[@gyurka777]

Awesome!❤
Thank you for sharing!

[@DIYPETE]

You bet, hope you are having a great weekend!

[@gyurka777]

@@DIYPETE
I have to wait for summer here in Wyoming to do carpentry, my garage is not insulated 🥺

[@idikwuode1917]

Amazing

[@user-ul5tj4mt3e]

Did you install it side by side because of look or spacing? That kit looks like a overlapping style. Good job and thanks for the guide, help me quiet a bit.

[@1983Macgyver]

Great videos. Good inspiration to a DIY`er and engineer from Norway. Also great entertaining. Have a great weekend Pete. Greetings from Norway.

[@angelaward4689]

If i do this for a closet and not care about how the inside looks, would I still use OSB and not place picket on the back?

[@aerialrescuesolutions3277]

Nice.

[@DIYPETE]

Thank you! Cheers!

[@RaggaRootz]

Sweet idea... any clue on about how heavy each door was? Thanks

[@RaggaRootz]

never mind you say so towards the end !!!