Elite series 2 controller stick drift fix xbox one s no solder no screws
HTML-код
- Опубликовано: 11 фев 2021
- hi how ore you guys sorry for the sock on the floor lolol and also not getting the drift on camera but like I said I have another serious to controller coming in the mail with supposedly the same stick drift if so I'll do another video where I catch the drift and the fix all the same time I was in the controller decided to take the faceplate off based on another video that I saw I was going to link it in the description but I didn't find it if I do find it I will update this but yeah hopefully this will help a lot of people from what I'm looking at between the comparison between the two controllers the Xbox one controller the Xbox series 2 controller they have the same thumbstick setup so if you do have a drift and a regular controller you might be able to do the same thing and fix it thank you guys tell me what you think of the comments and I know my fish tanks have a little bit of algae build up but I left my lights on for a day or two while I was out and it was a mistake thanks guys
Way to go man, my Elite Series 2's left stick was unusable due to vertical drift, otherwise it was working perfectly, 5 mins later and its all fixed and all because of you, I'd given up on it after seeing some really complicated youtube fixes, here's a subscription to you channel and a thumbs up as a way of thanks
Thank you so much sorry it took me 8 months to see it life has been hectic
how long did it last
i had like 4 normal controller they work till now i bought my series 2 controller and got a stick drift after 3 weeks never got that before
That's not how you even check for stick drift
I didn't expect to get drift so quickly on such a high quality looking controller
Same ordered one with drift... replacement drift... starting to wonder if any dont
What % drift you got... mine stays at left or up down by about 8% or 12%
Yea bro I’m so mad mine literally took like a month to get drift up and down on the left stick it’s unusable
I made the mistake of turning down the warranty on my used series 2. Mine has very tiny drift but in fortnite and naraka blade point it causes my character to move unwanted.
Mine took a year and a half
Worked like a charm! Till this day July 1st, 2023! Fixed my elite 2! Thanks man! saved me $100 bucks!
This just flat out worked!! I had been watched various how to videos and ordered some replacement assemblies. While I waited for them to get delivered, RUclips suggested this one. So I gave it a shot, figured what else do I have to lose. It ended up working flawlessly! Thanks much for this! You have truly earned the subscription today!!
Bro the second I saw this I did not think it would work but it ended up deleting my stick drift like Thanos snap
I've got to hand it to you for this one..thanks alot. I was about to get a new controller. Only had this Elite 2 for 8 months and it wants to get randomly stuck in the forward position. No other position. I examined it very closely and didn't see any kind of sticking or drifting superficial. But played with the green chips a little and now magically my sticks are like brand new. Thumbs up on this one.
You're a legend bro!!!! Popped up mine and never closed it and it works like a dream!!!
Broooo I stumbled on ur joint and fixed my stick that hasn’t been playable for a year! Just sitting in case collecting dust now works perfect. Thanks 🙏🏽. Saved me some bread 🍞
This completely fixed my controllers drift, thank you so so much for the video!!!
It really worked, I fixed all 5 of my controllers tonight! Thank you!!
Yo how do you open the controller
Just commenting to verify that this worked for me as well! Thanks for making this video. I was skeptical that it could be something so simple 😅
Absolute G had drift for forever and finally decide to fix it good thing your vid popped up first
Thank you so much mate I pulled the green things out and put them back in and it works perfectly now 🤩
Yo you are a life saver I didn’t expect this to work but it literally worked like a charm
Holy shit bro. Thank you! My drift was bad as well. And I messed around with that sensor, popped it out, spun that black rubber gasket around a few times. And i got it to work 🙌🙌🙌
I've never messed with the hardware of a controller, and I definitely have zero business popping one of these bad boys open, but I just followed along, having absolutely no idea what I was doing, and it's fixed. It's fucking fixed somehow. I love you.
thank you so much i’ve been dealing with this for months and i can’t thank you more for helping me
Bro! It worked!! I bought two of them for the longest I tried to figure how to fix them both the same problem after a a few months having them. Thanks Bud!!
Worked for mine, cheers mate. Had horrible up/down drift on my left stick too. For some reason popping off and on just the module on the right side didn't fix it completely, but after popping BOTH of them off and on, then it worked. Not sure how long this fix will work, but it saved my controller from being a paperweight for now.
Hey man thanks for this. I've tried everything and watching this video fixed my controller.
Bro you are the GOAT! Works perfectly now after the stickdrift was almost unbearable
Took two tries but worked for me!!!! Thankyou for this.
Holy crap, this worked! I actually bought a second elite 2 cause my first one got crazy vertical drift after 2-3 months. I haven't tried it til today a couple years later. Now I got two working series 2s! Thanks bud!! 👍👍👍
Wow this worked for me, thank you. I didn’t even take out the sensor, just detached and re attached, works now
Bro thanks so much on the video. I was going crazy over here.
Omg Thank you so much I was pissed of because woke up dis moring and hade mad stick drift u saved me my guy thank you.
100% worked my man, I had down drift and it was really messing me up. Good vid
Wow, yeah it worked for me I literally just did it. I will say that if you’re left stick drifts up and down you have to pop open both plates, for me the bottom plate was harder to get back in but it definitely works, I don’t know how but it does. Thank you sir, you just saved me $200
First, thank you so much, and second, i popped the green chip thing out a bit and my stick worked perfectly, but when I put it in place, it was even worse. I popped it out just a little again and, it was good again.
Well I can say it works thank you very much I was so gutted about the drift but now its fixed really thank you
Thanks so much buddy this fixed it. I was able to unscrew the thumb stick so I just must them to the side and was able to open the sensors that way just fine. Definitely subscribing to his channel!!!
Holy shyt bro way to go I fixed my elite series 2 controller plus three other controllers I had bought before I got my elite thinking I wouldnt have this problem but wow u know I had bought the lil joystick module n was about to break it down to install new one I bought all the stuff to, sodering tools n all u have to do is open the side pull out the lil disc clean it a lil put it back in thank u so much I got a lil extra cash now to after selling the other controllers I fixed🤑👍
thank you so much, just fixed it, i've has this controller for over a year and i've has to deal with my drift and unresponsive, seriously thank you
Yes, it works...to a point.
1. Stoopid easy to open these contrary to what everyone says. Work at the top two corners by the bumpers, then work down each side and pop goes the cover off with a slight pull
2. You CAN snap them off without removing the caps but if it dont work then you gotta pull em
3. Remove them by turning w a towel, easy and steady. They aint that damned tight yall.
4. Pop the hreen caps off, push the disk towards the stick with a pick or toothpick and then spray contact cleaner in towards the copper disk. Wait 10 seconds and spray again.
5
Blow it out and its fucking FIXED
6. TELL MS TO PISS OFF!!!
you rock dude
Will this fix a stick that’s not clicking anymore ?
Thanks bro, so far it really worked. Awesome sharing your experience, I've also subbed
Thanks man, it definitely helped me get my controller going. Like brand new
Helped out yet another guy, thx so much
I fixed mine the exact same way!! Thank you for the video
Thank you brother. You are the best of us 🙌
i had to mess with the sensor 4 times but after the fourth it worked perfect! thank’s alot!
Holy crap.. this fixed my elite 2.. thanks!!!
Thanks man it worked for me. A deserved like 👍
ty, totally worked for me... not at first, but did it again and now i'm back in the game. no drift...
This actually worked amazingly thank you so much!
worked great fixed my elite 2 with no problems and no drift now ..
Nice fish tank…thank you for the wonderful video
Well i can say it still works pull it twice now is working like new thanks dude
Bro thank you so much you helped me fix my controller!
You are a fucking god-send dude. If Microsoft just put a link to this video on their website, they would never get calls about stick drift again!
I did this in 10 minutes with my old permit ID (to pry the edges of the front), my knife (to lift the front off), and a pair of pliers (to move the sensor). Anyone can do this with pretty much no tools!
Thanks again man!
This worked. i didn't have to take the stick apart...just held it to the left to access the up/down sensor and loosed it a bit and it fixed my stick drift. Thanks!
Honestly that is genius 👏 I will try that with the next one i fix
Thanks for the tip. It fixed my drift issue
Holy shit dude that straight up worked thank you so much
This totally fixed the drift on my controller thanks.
Wow it really worked “YOU SAVED MY CONTROLER”!!! That’s crazy bro 😮 thank you!!!!!! No lie it works!!!
Can’t believe it works thanks heaps man!!!
To anyone wandering this kinda works guys... Def improved my drift by like 80 percent but hasnt elminiated it... A full module replacement is inevitable
Wow, it actually worked thanks mate! 🙏
I cant believe this worked man but it did, thanks a bunch for uploading this. really need to get me into that lawsuit
I love you!!!! Just saved me from buying a new controller.
Was it an elite or normal controller?
Damn dude thank you so much, worked instantly
it actually worked, amazing thank you
Worked for me but I had to move that green sensor away from the middle square a bit for it to work right. Thanks man 🤙
FYI, my controller works great now - thank you. However, you don't actually need to remove/break the thumbstick seal - you can fit a small flat head/knife into the sides of the thumbstick to pop open the sensors - worked for me! Thanks again.
so you didn't unscrew the thumbsticks?
Hey Dan, do you reckon you could make a video yourself on how to do that?
Just tried it out and it seems to work! Thanks!
You legend! Worked a treat 👌👌
Worked great. Thank you!
Best guide I have watched and worked beautifully just had some problems twisting the stick to get the covering off but it came off after a while
Was that on an elite controller or an Xbox one?
How’d you get the covering off I can’t bruh
I have to say I've tried all kinds of techniques 😒to fix this issue but, this video right here ✊😀
This worked great for me. Thanks very much
You sir saved me $250. Thank you!
Same with mine exact same issue. At the price we paid its unacceptable. Thanks for the video.
Thank you , you help me fix my controller
Thanks a ton. Now I can enjoy my Mass Effect Legendary playthroughs!!
Cheers mate it works....amazing, a few chunks of plastic came off when I was taking the front plate off, I think they where some clips. Don't matter better than stick drift.
It works. Thank you very much for sharing.
WARNING: i tried this and it worked at first, but silly me kept trying it because the stick drift wasn’t completely gone. i think my continued fidgeting actually worsened my stick drift. so if anyone wants to try this, don’t mess with the sensors more than once or twice because it could possibly make things worse. hope this helps someone because my stick drift is so bad now lol
pog
Same here, mine worked for like 20min so I tried again, helped a little, tried again now it's completely fucked up, non-stop drift
Same
100% works but I did figure out that you don’t have to remove the half circle cover if you just move it to the side you can fit a screwdriver in there and pop that sensor off!!
Thanks for fix
I see that red empress back there bro!
Thank you man s/o from france
I can't believe that worked wow I did mine in less then 10 mins thanks man
How long does the fix last for?
Dude. Thanks. It works 👍
Thank you so much man it worked
Works perfect now cheers 🍻
I did everything u did and it work
This actually works??? I was about to Spend 250 on a new one with warranty but u saved me 250$. Thank u so much
Thanks bro this worked 🙏🏾
Dude this shit works for real! I had to pop mine twice but it worked after poping open and then closed 2 times
let’s go! this worked for mine
I just replaced the whole disk and it went well, took a few of ‘‘em to find one that works but I managed
4:25 im creasing 😂😂😂 bro when he realized he popped the wrong controller open
I had more of a laggy stick. I used alcohol to clean around the joystick. it helped but didn't fix it. I did this and now its gone. Nice one bro!
Quick question so did you have to repeatedly move the joystick in order to move??
@@hunterchaos8150 yea i would push forward and it wouldn't move. I had to wiggle the joystick for it to register. This actually worked for me.
@@donnieadkins6602
Please, I don’t manage to remove the joystick ( 1:14 )
Can you help me ?
@@eliaslebest4576 i did not remove my joystick. I just pulled it to the side and used tweezers to pop open the module. Then cleaned around the joystick using a Q-tip with alcohol.
Think it fixed mine also, thanks man. Nevermind it didn't 😂
Thank u so much I worked
Ummm this is so strange but my controller got fixed thanks a lot
Worked! Ty
Good to know there's a fix but I'm not doing this, returning today
It works thanks
I approve this video
Completely worked.
It actually works!!
it actually worked I just opened it and cleaned it out and closed it back