Rebooting a GE Adora dishwasher, no lights.
HTML-код
- Опубликовано: 8 сен 2020
- No lights at all, this is how you reboot it. Update... my washer was running great. I then changed one thing, heat dry.... It turned off again. Obviously, my problem with the electronics is with the heat part. Runs fine as long as i dont run heat dry..
Хобби
Thank you so much for posting. My parents GE dishwasher was fixed by watching this video. Very clear and concise. Well done.
Linda, you are a Goddess! I have a slightly different GE model but decided to try the same sequence on it. Bam! It worked. We too have electrical storms and the last one must have just been enough (despite a whole-house surge protector). Well done, Lady!
Thank you for your video post. I watched about 2 hours of other videos service men posted with no success. I watched yours and my dishwasher is working again without buying expensive boards. We had some power outages and the power surge knocked out our dishwasher.
Thank you again. Very helpful video. I saved it and emailed it to myself. 😊
This was so helpful to me!!!! I pulled out my filter to clean it and the interior of my dishwasher and after putting it back in my dishwasher wouldn’t start. Your video saved me a ton in repair fees! Thank you!
My dishwasher turned on normal but never powered through the cycle. So I tried this and it worked!! Even with my power button on . Brilliant!
I cannot thank you enough for posting this video. I ordered a new circuit board and when I turned the power back on I got nothing. Looked at your video and tried it out and it worked!!! Thank you a million!!
Thank you, Linda! We've been without our dishwasher for nearly two years. Can't believe the fix would be this simple.
Model GDT655SSJ0SS - Lights were flickering in the house (windy day) and made it stop halfway through a cycle. Followed your instructions and it worked! The cycle picked up where it left off so all I had to do was cancel it and start over. Thank you so much for this video, saved me $$.
Linda, you are an angel. You fixed our GE dishwasher and saved us at least $300. Thank you and God Bless You! Happy Holidays!
Happy Holidays to you tooooo.....
Thank you, Linda! We were in a crazy off-season storm that caused the power to flicker several times, making me concerned about circuit boards on appliances that suffer from brown-outs. The sole victim was the dishwasher. We were transitioning into "gotta get a new one," and I checked YoutTube out. Your sequence did the trick! High fives and kudos to you!
Its scary to think of how many ended up in the junk yard for no reason..
Linda you are a hero. Lightning strike zapped our GE dishwasher and your instructions brought it back to life. As with others, we were looking into a replacement or repair at great expense. We would share a meal of thinks if we could. Thank you!!
Good deal!!! No one wakes up saying, "I sure want to buy a new dishwasher today." ......ever....
What you did was put the machine into service mode. If you push the cycle select & start buttons for 5 seconds at the same time causes this. From this mode you can test the different components of the machine. There is a paper describing this located on the bottom near the water valve.
Omg. This saved my life. Couldn’t get mind to do anything. And I followed you in the video and it did exactly as yours did. Thank you!!!!
I have a different model but same door controls. I turned power off to the machine to change diverter valve and then it was dead. I found your video and BOOM!!!!. It's on. You're awesome. Thank you.
Linda Crawford, you now have another like and another subscriber!! It’s the least I could do for you saving me literally thousands of dollars. My wife was picking out full appliance sets because the dishwasher wouldn’t work!! God Bless you!!
I want to go buy a new dishwasher.... SAID NO ONE EVER.... right...lol.. So glad it worked for you. My husband was about to rip mine out and thank god i'm a button pusher because i was determined i was not going to replace this one. Mine is still a little persnickety, but i have it figured out. I've gone through several theories as to why mine is like it is. I think i've decided that there is some sort of timer thing that is wonky. I can use mine once a day. It has to stay shut for a time after its finished and i can only push the start button once...but it works every time.
Thank you for this! I couldn't get my dishwasher to start for anything and this fixed it
My dishwasher display wasn't working and I found your video after watching a few that involved opening the circuit board and taking the dishwasher apart (which I wasn't going to do). At first I was skeptical while watching your video, but it worked! 😃
A quick and easy fix thanks to you!
You saved me a lot of money PLUS the aggravation of having to hand wash all my dishes! Thank you so very much!!!
So glad to hear.. I've always been a button pusher and this time it paid off....lol.
THANK YOU SO MUCH, LINDA!!!! Just pressing the 2 buttons for a few seconds worked for us. But it kept happening for several weeks, then the machine went completely dead and wouldn't reset. We thought it was a dishwasher issue, turns out our outlet went bad. Electrician REPLACED the OUTLET but it still wouldn't turn on. GE says to UNPLUG the unit for 30 seconds (disconnect from power supply). Plugged it back in and it works again. We had some ELECTRICAL ISSUES a few weeks back, which most likely caused the issues. We LOVE this dishwasher, by the way.
A repair guy came to fix ours, he tried the reset buttons trick but lights stayed off. He removed the bottom black panel 2 screws and unplugged a white connector for about a minute then plugged it back in again.. the lights came on! Then he had to do some reset routine that is covered in some of these videos. He said this happens all the time with this model. Charged me $79 lol! But I don’t see a video on RUclips that covered his fix. He said that it may happen again and if the unplugging connector doesn’t work to buy an LG.. he doesn’t get calls on LG
Sweet Linda.. you saved me purchasing a new logic board for my Adora!!a, thank you so much. Wish I could buy you a nice lunch for all your help!!
You are amazing! I followed your steps and my Adora dishwasher is working again! Thank you
Thanks so much for posting. You saved me from an expensive service call!
I have been watching several videos on this complicated machine & they all seem to have a trick that works Yours stopped the blinking & apparently reset this thing. I miss old dishwashers that simply did the job Great. Thx
Exactly... wished there was a dishwasher that had one button, CLEAN.... not kindof clean, better clean, maybe clean..... just clean the heck out of whatever is put in there. I dont own any delectate things, everything i have can withstand a somoni .. So I totally agree. My dishwasher is around 5 yrs old, and it will take months to buy a new one which i dont want to spend 800 for a new one with the same electronics.. We are though, going to by a new mainboard since, i cant touch anything on this one without it going dead... This rebooting is just a temp fix for some of them. I blame it on days of our electricity flickering.... it died after that.... If it had one 'ON" button, it would still be working... GE are you listening!!!
Wow. Thanks a bunch. Wonder what causes this problem
Oh you saved me a whole lot of headache. I should have checked this out before i called the service guy who could not figure out what was wrong with it. At least he checked the fuse to confirm there is power to the device. Thank you thank you thank YOU for sharing
Thank You! I have used your video several times and it works every time! I do encounter a crazy exception, I follow your video just as instructed, HOWEVER, there is never a response and the buttons stay dark? My husband goes to our circuit box, turns off the power, counts 30 seconds. He says he is done, I press the start button AND it comes back on ready for use? Why? Don’t care it works!
Not recommending, just so happy it works!
This was a lifesaver! Thank you so much for posting!! It worked for us!
You are incredible, amazing, and any other adjective that can possibly describe you right now :-). Our dishwasher just stopped working tonight, we have the same model, this absolutely fixed it. You are amazing thank you for everything :-)!
Just used this video this morning on a similar model, and it worked! Thank you so much for sharing.
Thank you Linda! Not exactly the same model but pressed the "start" button and the "cycle" button at the same time (hold for 5) etc... and it works!
I love you! You saved the day 😂. I was just about to call a repairman that gave me a quote of $300! A million thank yous!
Linda, this video is unbelievable. I was honestly laughing to myself while watching you press what looked like a random sequence of buttons. However, the joke was on me! This fixed my flashing yellow light problem. This UI kept acting like the door was open when it wasn't. Thank you!
It took me hours of pushing buttons to remember the sequence because i would do it and then do something that messed it up. So, that is why i videoed it, so i'd remember. My dishwasher is still working great. Its been 2 years now. Got me through the covid years and hope it gets me through the appliance shortage years.
Lifesaver! It took me doing this twice and holding my mouth just right and it got my GE Adora to work! Thank you very much!
Never underestimate the power of holding your mouth right....
You saved me a lot of work or a new dishwasher! Thanks for posting this.
Thank you! This worked - I was ready to give up when I found your simple instructions.
Thank you. Lost power for 24 hours and after, machine would not turn on. This process worked.
Thank you, you are the best. You saved me $$$$$ and a nervous breakdown. Worked like a charm... Thank you again.
Oh thank you! That worked on my GE though a different model. It still worked. Thank goodness, thought I was going to have to buy a new machine!
Linda you solved my dishwasher issue. model GDT655SSJ2SS. Thank You
I have you on my saved videos. You must of saved me like 3x with this! Thank you!!! 😊
I don't think I've ever commented on a video before, but this did the trick, THANK YOU
I don’t know where you found this secret code, but you are a lifesaver!!! Thank you,
I've always been a button pusher... paid off here.
I pushed the srtart button as usual on our GE Adora and the light would not come on. I immediately thought there was probable an issue at the Breaker Box so I changed the Breaker in hopes that would solve the problem. I then searched for a reset button only to find that there wasn't one. My next thought was that, since the unit worled flawlessly for 6 years it was ready to retire. We shopped for a new one and was just about ready to pull the triger an my Engineering mind kicked into gear. Maybe there was a way to reboot the machine since it seemed to have some similarities to a Computer. I tried a few things with no success and I decided to call on my best friend......RUclips RUclips has bailed me out of jams more times than I can count so I proceeded to do some searching and I came across this posting which made alot of sense. Well, I watched the video and within 10 minutes Ole Adora was running like a champ!! Big Thanks to Linda Crawford!!!! Ya saved me about $1,000 for the purchase and installation for a new unit!!
No one wakes up in the morning and says, "Lets go buy a new dishwasher...lol" So glad it helped you out.
You are awesome! Thank you for posting this. Just what I needed😊
Thank you, this video just saved me buying a new dishwasher!!!
You are a national treasure ma'am, i have the GE dishwasher that does the same thing, thank you do much gor this video
Life and money saver!!!! Totally fixed it!!!
We did what you said and it fixed my dishwasher! YOU ARE AMAZING!!! thank you so much
So happy!!! Who wakes up Saturday morning and says, 'Hey, lets go get a new dishwasher!" NOBODY!... and nobody is getting a new dishwasher anymore anyway, you have to order it and hope it comes in...right...
THANK YOU- your help is so much appreciated
So helpful and worked perfectly! Thank you!
Thank you so much for this video!! You just saved me hundreds of dollars.
Thank you so much. This saved my dishwasher 😀
Wow! That really worked! Thank you for posting this video.
Linda is the hero we need! 🎉❤
You are a lifesaver! Thank you so much.
it worked!!!! or at least I am running a test cycle now - appears to be working. THANKS!!
If it goes wonky again, let me know. Mine can be stupid sometimes, but i've had it working for months now...
Linda you are amazing!!! Thank you!
Thank you!, My husband was about to tear apart the kitchen😁
Thats all i could think of when my husband wanted to tear it apart... i just couldnt let that happen...lol... Luckily, i'm a button pusher, always have been. I spent hours pushing buttons on mine until i got it figured out...
Thank you very much. I tried this and it worked!!!!
It worked !!!! Thank you for sharing
You just saved us money!!! Thanks!!!
Awesome. Worked perfectly. Thanks
Incredible!! It worked for us!
Thanks! Fixed my parents after a lightning storm!
Awesome! Thanks for the help!
YOU SAVED ME A 100 bucks!!!!!! Thanks. Jerry
Thank you. This worked for mine.
You're so awesome THANK YOU!
Awesomeness!!!! Thank you!
Omg
Thank you soooo much
It worked
thank you very much , bless you.
thank you for posting your video ,unfortunately mine did not work, I had two repair guys and an electrician it still doesn't work.
Thank you it worked!!!!!
I watched this and tried it with no luck unfortunately. Then I just decided, heck, why dont I just try unplugging my dishwasher and plugging it back in. BOOM, power back on. Whew! :-)
I had to hit the circuit breaker a couple of times but this worked.
You are the best
Thank you!!!
Mine is doing the same thing. But I have lights on mine. I press the start and it beeps and I get an amber light and green light flashing. The trick didn't work. :( I'll try again and see. I loved how you explain it to understand it.
OMG THANK YOU!!!
OH MY GOD. THANK YOU!!!!
Thank you thank you!
Cycling the power by turning off the breaker for 30 seconds or so is easier in most cases. Our dishwasher gets in a confused state now and then and won’t run and cycling the power seems to bring it back to its senses. Most likely a bug in the GE firmware or software.
It didn’t work for me either but the unplug -plug back in worked. I put up Christmas lights outside and caused a gfi to trip ( it was raining ). Either way this video got me going again. Thanks everyone.
Thank you. Mine was doing the same thing and now its fixed LMAO
THANK YOU!
I have this problem at least once a week and I have found by turning off the circuit breaker for about five minutes and then turning it back on resets the dishwasher and then it works for another week
THANK YOU
Not all heroes wear capes!
So this got me back on but still won’t complete a cycle before going ‘dead’ again. I’ve tried 4 times now. Anyone know what is wrong or needs to be replaced when this is happening? Just seems they should last more than 4 years.
We're going to replace the main board, mine is iffy also but has worked some.. Our electricity flickering for days is why i think mine is did this.. I also agree and with the amount of views i've had on the video says this dishwasher has a problem.... maybe we should bring attention to GE that they sold a problem...
I've been trying to do the same thing, but an amber light blinks when I close the door. Do you know what that means?
Hum, i have no idea. You might can google GE flashing door light. It may be telling you what needs replaced...
I have finally found the right person. I have a safe that I lost the combination to. Can you help?
I follow your directions and nothing turned on?
You rock.
Hi I watched your video and I tried doing what you said I have no light at all and it’s not working, do you have any suggestions?
Thank you
Just saw this, did you ever get it going?
@@cowgirls8 no unfortunately can’t be fixed
@@juliaklein1459 mine does the same thing. I cut the power at the breaker box and pull the 2 power wires (one to the circuit board and the other to then control panel). Sometimes I leave it like that overbite for any residual power to dissipate. Plug back in wires and return power from breaker box. Sometimes that does the trick. I regret buying this washee
How did you learn this reset sequence? I assume from the Tech Sheet that came with dishwasher?
I just started pushing buttons. I had no idea it would do anything but saw that when it did something, i got curious if i could fix it. I videoed it because i couldnt remember how i pushed them to make it work. But then thought, maybe it would help others.
I found that is I disconnect the board connectors, then turn the board on & off, connect the motor connection, turn on & off, then install the interface connector and turn back on it resets.
Hello and thank you for these instructions.
Just when i thought it was going to work, it wouldn't. I have reset 4 times and every time i try taking it for a test run, the lights are on and once i close the door, it will stay on for 2 seconds and power off completely where the only option is to reset again to get any button to light up. Will keep trying.
Hi there, did you find a fix?
I've found that mine has to sit 24 hours after a cycle for it to work another cycle. Reboot, let it empty, then let it sit overnight.. dont open it, just leave it. Once you open it, it will light up. Get it loaded and push the start button before you shut it... Mine will get goofy again, and i have to figure out why...... but i've kept it going.
I followed everything and turned off the heated dry setting, it still isn't working
Did the lights come on though? If they did, but it still didnt finish a cycle, turn off the breaker to the dishwasher. Let it stay off several hours. Then try rebooting again.. Shut the dishwasher and dont press anything. It should empty the water out. Let it sit a day, then open it. If it lights up DONT TOUCH ANYTHING. Shut it and press start.. See if it finishes a cycle. If the green light comes on, then, its maybe good to go if you dont touch any buttons, dont change the cycle, dont push anything other than start...lol.. I'm not a repair person, just some one who took this as a challenge to get it running again. Or at least hold out till we can get a part. After rebooting and rebooting and rebooting, i figured it out..
Thanks 😅
So what if it’s still dead then does that mean it’s the control board ?
I guess... i'm not a repair person, i'm just cheap and hate to spend money.. But, i'm guessing if it didnt wake yours up, its the control board... Of course, make sure you have power going to it, check your breaker and make sure its plugged in good.. that would be the cheapest fix....
I’m following the steps and as soon as it goes to start it turns off again
I tries mine...but didn't work