How to Change the Air Filter on a 2017 Ford Focus
HTML-код
- Опубликовано: 17 июл 2019
- Welcome back to the Mr Daily Driver channel
Today I’m replacing the air filter in my 2017 Ford Focus SE. I was able to purchase a replacement filter from amazon for only $12.
Purchase the air filter here: amzn.to/2SrrpvM
#2017fordfocus #airfilter #dailydriver
Product description
MAP 6008 Engine Filter Fits:
FORD ESCAPE [2017-2018] L4 1.5L
FORD ESCAPE [2013-2016] L4 1.6L
FORD ESCAPE [2013-2018] L4 2.0L
FORD FOCUS [2015-2018] L3 1.0L
FORD FOCUS [2012-2018] L4 2.0L
FORD FOCUS [2016-2018] L4 2.3L
FORD TRANSIT CONNECT [2014-2016] L4 1.6L
LINCOLN MKC [2015-2019] L4 2.0L
LINCOLN MKC [2015-2019] L4 2.3L 
Авто/Мото
Part of the video was upside down for some reason lol, but let me know if I missed anything
Get a set of socket wrenches, grab the 8mm socket with the extension and just loosen the screws up than the top will lift off with all 4 screws still seated in the top
Thanks for this video.
I highly recommend the proper tool is used for the upper right bolt. I have a 2017 Ford Focus, and with the tiny engine, there's just no way to fit and turn a wrench/plyers into that final bolt. Use the right size and extended socket tool, for your own sanity.
Thanks - your video showed me exactly what I needed to know. I hear you about how air filters have changed back in the day. :)
This is a really great video! It took quite a bit of pushing and shoving but I got it all lined up right. I changed mine at 33,000 miles and that filter was pretty cruddy.
I wish I could like this twice just for opening the good with one hand. 🙌
Yeah it was a bit of a struggle lol
Thank you. A very useful video showing how the average person - me - can do the job.
Thank you brodi this is a perfect video
The A holes who put my filter couldn’t do it properly so there was dirt all over the filter since they left it half open.
Thanks for the video I was able to do it myself.
I finally found a somewhat easier way to doing it. Take the housing out of position and you’ve got enough room to work. Then easier to push into its tab and the screws line up perfectly. Then shove entire thing back into place. Tada dang toughest filter I ever had to replace. Whew 😥
How did you get the cover off?
Only thing I couldn't figure out..
Love a man who's good with his hands 😆💯
Just changed mine out ( 2016 Focus SE 2.0 L L4 ) and found out the new ones I tried are a lil bigger than orignal one and so much harder to put it in .I tried supertech , fram and even Motorcraft and they all a lil longer . Anyone else had a problem putting in new one ?
Thanks Buddy. 👍
I think the next time we replace it we need to push against the left part not the right side . I did it the other way and it was way too much trouble. I think hope it'll be much easier .
Thank you!
Are all four bolts supposed to be the same size? Mine are and the two on the right aren't long enough to screw into anything.
Can you tell .we abouts the emissions.ission filter where it is
I literally can’t get the cover back om
Same
How often should it be changed?
Every 30,000 miles
hey i have a question rq if i leave the top cover off is it bad?
I wouldnt do it long term but these cylindrical filters are sealed pretty well. Reminds me of the k&n open filters
@@robertl2227 alr i have been for awhile now only thing that’s different is u get better response on the gas and a deep growl
🤣😂😂Get yourself a cheap metric/standard ratchet set with extensions and a metric/standard nut driver set!
dude im literally facepalming at that
This was your chance to buy new tools. My OEM Ford filter just won't fit. I had to really jam it in and the upper cover wouldn't line up. Then I lost a screw when it fell into the splash pan. I ordered new screws and I'll have to try again. Same issue with my 2014. New filters won't fit. The dealership service charges $80 for a filter change. The cabin filter was a 10 minute breeze.
On my 2014, it was a bit of work to get the new filter to fit, but it did. Just had to insert it and seat it fully and firmly onto its mating hose. Then it took about three tries to fit the top cover so it was properly seated and could be bolted back down. Yes, it was a tight fit, but it did finally go back together nicely. And ditto about the tools, I couldn't believe he was using needle-nose pliers and then an open-ended wrench, when a socket and extension were the obvious requirement.
8mm screw
extensions my friend..
Does changing the air filter make your car run better or accelerate better?
If your air filter is dirty enough yes it will. The point is to change it before it gets that bad.
OO7 yes i changed it shortly after and it ran a tad bit better. Still I’ll never buy a ford car again.
@@cruorem5775 how many miles had it gone before you changed it?
@@cruorem5775 That escalated 0-2000 quick lol
Didnt have the extender, just a tiny handle 8mm and of course it slipped and is down in there somewhere. Terrible placement on that last screw!
Sockets maybe?😂😂😂 Those are needle nosed pliers initially, but they soon turn into a wrench. 😂😂😂 Look, I’m all for aspiring mechanics trying to save a few dollars and doing a few basic automotive things on their own, like tire pressure, checking oil, wiper blade, and light bulb replacement.
You my good friend are taking a very big chance at stripping your bolts by NOT having on hand a proper BASIC automotive maintenance tool set on your car.
Amazon sells them cheaply, or maybe your spouse or family member can get you one for Xmas.
You seem like a go -getter and a great guy!
But also remember, even the correct toll can be dangerous in an unskilled mechanic’s hands.
😂
Try vacuuming your floor first.
Yeah, I gotta work on that. Thanks for the suggestion