@@xxsuperlocoxx283 Oh, I don't know. Those wires are really tiny. You wouldn't want to do soldering and finding the right sockets for those. Is your scooter by Aovopro?
It's glued on. You just have to break it off, remove all the glue and glue the new one back on. If you didn't get a new one, I'd just use a little electrical tape along with some transparent packaging tape for the display. Or, just get creative. Where there's a will there's a way.
It was nowhere near as easy as he made it seem but I finally got it and this helped. Thanks.
Where did u order the part from I did on Amazon threw the scooters company but the wire is not the same but everything else is
@@xxsuperlocoxx283 Oh, I don't know. Those wires are really tiny. You wouldn't want to do soldering and finding the right sockets for those. Is your scooter by Aovopro?
What screw do i use to tighten the throttle?
How do you get the control panel off…..it’s already removed at the start of the video?
Came here to ask the same question. I was watching video for a different brand (which looks very similar to AOVOPRO) and it was basically glued.
the screen cover? Use a knife to pry it open from the edges.
It's glued on. You just have to break it off, remove all the glue and glue the new one back on. If you didn't get a new one, I'd just use a little electrical tape along with some transparent packaging tape for the display. Or, just get creative. Where there's a will there's a way.
@@maciejklasa6783 I think the same scooter goes under about 30 different brand names. That happens sometimes.
That’s cool and all but where do I order a new accelerator
Amazon
What screwdriver is used to take of the throttle?
M3 screwdriver
You need a small phillips head and a set of hex wrenches.
@@PaulTheSkeptic what is the screw that was in the throttle
@@hopedreams9671 If memory serves, you'll need both to remove the throttle. But it's been a while since I've done it.
@@PaulTheSkepticcan a allen wrench work on the hex screw