Видео

Amazon

Where did u order the part from I did on Amazon threw the scooters company but the wire is not the same but everything else is

@@xxsuperlocoxx283 Oh, I don't know. Those wires are really tiny. You wouldn't want to do soldering and finding the right sockets for those. Is your scooter by Aovopro?

Peak watt: 750W

M3 screwdriver

You need a small phillips head and a set of hex wrenches.

@@PaulTheSkeptic what is the screw that was in the throttle

@@hopedreams9671 If memory serves, you'll need both to remove the throttle. But it's been a while since I've done it.

@@PaulTheSkepticcan a allen wrench work on the hex screw

The default maximum speed is 15mph, which can be increased to 22mph after the speed limit is lifted.

To release and restore the speed limit: When the scooter is turned off, turn the accelerator to the bottom and hold the brake, then turn the key to turn it on and wait for 10 seconds.

Came here to ask the same question. I was watching video for a different brand (which looks very similar to AOVOPRO) and it was basically glued.

the screen cover? Use a knife to pry it open from the edges.

It's glued on. You just have to break it off, remove all the glue and glue the new one back on. If you didn't get a new one, I'd just use a little electrical tape along with some transparent packaging tape for the display. Or, just get creative. Where there's a will there's a way.

@@maciejklasa6783 I think the same scooter goes under about 30 different brand names. That happens sometimes.

Does adjusting the folding buckle according to the video not work?

Tighten all four screws halfway into the holes, then continue tightening them one by one. Do not tighten one screw completely before starting the next screw.

SCOOTERT MODEL ESMAX 'S MAX SPEED IS 35KM/H(22MPH)

Just tear from the edge.

Ebay

There's little bolts behind the reflective stickers

There's little bolts behind the reflective stickers