We as consumers should not have to disassemble a factory scoiter and mess with the electricity , most of us are not licensed electricians and these scoiters can burst into flames. It is ridiculous that any manufacturer would expect anything other than a replacement. Quality check products before releasing them for sale.
To open it or not its everyones jurisdiiction it is prohibited for non electronic experience..if you have an electronic background or you're a technician you can open and fix
Hello,do you know how to remove the LCD so i can press the power button i think thats the main problem my power button is not on the position.i know the battery is still ok coz it charge but no power.
hi,can you help??? i have a kaboo mantis 10 single motor and i have a no acceleration no motor spin issue, lights work, battery is fully charged, no error codes can you help??? Thanks in advance
I left my m365 unuse over a year n now not charging. I open the case, and there is no red or blue led. But upon plugin charger, it flashed red 4 times. Check BMS voltage output is 18.40v, but the battery before BMS is 36v. What can be wrong? Is the BMS board faulty after unuse for too long ? Update: bms board faulty, removed n replaced, it's working now.
I’ve Got a few scooters all 20 km/h They beep and the screen turns on for a short while but then shuts Down again. I’ll have to wait a few mins before it will do the same thing when i try turn Them on. Does anyone know if it’s fixable and if it is where to find a video of someone with the same problem? Thank you
i have the same problem on my scooter but my scooter doesn't charge,the led on the charger remaining green,if you have news about this problem tell me pls
That's a volt issue if it turns on and then turns off when u ride it but will stay on for a while then its to do with it not getting enough volts so either replace battery or check connections
I have Mercane wildewheel PRO scooter showing (ER) on the screen,,started but not accelerating..Any help from anyone please?,,i can pay once repaired..
You are not fixing anything here. It is VERY unlikely that the issue was this blue connector. More likely to be one of the electronic boards or the battery.
J'ai un problème avec le scooter Xiaomi Pro 2. Il dure longtemps lorsqu'il est allumé et dure longtemps lorsqu'il est éteint. Après cela, il s'allume tout seul et je ne peux pas changer de mode ni régler l'éclairage. une solution?
It's the music for me dawg.
Fr man
We as consumers should not have to disassemble a factory scoiter and mess with the electricity , most of us are not licensed electricians and these scoiters can burst into flames. It is ridiculous that any manufacturer would expect anything other than a replacement. Quality check products before releasing them for sale.
I agree. I recently purchased one and the wiring to the handlebars wasn't even connected. WTF?
Yes literally
To open it or not its everyones jurisdiiction it is prohibited for non electronic experience..if you have an electronic background or you're a technician you can open and fix
I love you man you saved me and my scooter
Glad to hear it
Does this work on other scooters
Oh my god i didn't even know that was there thank you for telling me
Does this work on the older cheaper hovercraft 1 escooter? I don't got the alpha but the original cheaper one from Walmart
Just test it bruh
Voilà merci tout les concept😊
mine wont turn on at all, i dont know if its because its been in a cold garage for too long or what. how do i fix it? or is it even possible to fix it
Try spinning the wheel that’s has the motor on it while you have it on charge. Just got 4 unresponsive scooters start charging that way
@@maksimmakhanovtrk7769okay thank you, i will try it
@@maksimmakhanovtrk7769 how long do i need to spin it for?
Did it work for you
@@revengeguy7261no
Good video thank you ❤
You're welcome
Would a broken/burned out throttle display stop the whole scooter from turning on?
What screwdriver did you use?
Hex Key Screwdriver
Thank you ❤
Did you have the same problem?😢
Will this work for the segway F2 kickstarter escooter?
Just try it dumbass
When I hold my power button the backlight just flashes but it doesn’t turn on
Me too
same brother, did u fix it somehow tho?
Hello,do you know how to remove the LCD so i can press the power button i think thats the main problem my power button is not on the position.i know the battery is still ok coz it charge but no power.
ruclips.net/video/xjch3XkkpF4/видео.html
Great Video
Thanks
Thank you
Strange music for the situation but I like it 😊
hi,can you help??? i have a kaboo mantis 10 single motor and i have a no acceleration no motor spin issue, lights work, battery is fully charged, no error codes can you help??? Thanks in advance
I left my m365 unuse over a year n now not charging. I open the case, and there is no red or blue led. But upon plugin charger, it flashed red 4 times. Check BMS voltage output is 18.40v, but the battery before BMS is 36v. What can be wrong? Is the BMS board faulty after unuse for too long ? Update: bms board faulty, removed n replaced, it's working now.
Seems like you tried everything lol, imo just go to a shop and repair
Hii, edit your videos, lose a lot off time with the screws
thx....red light turns on only but the scooter does not...i charged fully .
You're Welcome
I drived in the rain whit e wheels scooter and it stopped woking i only drived like 20 min??
Mine still turned on .. I can’t switch it off ..
I tried your technique, the scooter turns off but It turns on again when switch the cable …
I’ve Got a few scooters all 20 km/h
They beep and the screen turns on for a short while but then shuts Down again. I’ll have to wait a few mins before it will do the same thing when i try turn Them on.
Does anyone know if it’s fixable and if it is where to find a video of someone with the same problem? Thank you
i have the same problem on my scooter but my scooter doesn't charge,the led on the charger remaining green,if you have news about this problem tell me pls
My friend boughtbhers yesterday charged it but wont power on so she cant even pair it
same for me
Same here,bought an i9 and it won't even turn on or take a charge
@@ikekicks4742 i found out that you first must disconnect it from charging and then hold the power button
My scooter shut off while riding after few minutes just beep but meter screen still off
Little advice: way too much time showing screws being screwed or unscrewed 😂
My scooter loses power on the hills how can I fix this.
My scooter won't turn on do it have to charge first
Legend
w
the hex screws are so tight and they do not come undone! can somebody help me
Home Depot sells oils that loosen screws liquid wrench
my sisigad dart max won't turn on and I got it a week ago
I have power but it doesn’t go .
That's a volt issue if it turns on and then turns off when u ride it but will stay on for a while then its to do with it not getting enough volts so either replace battery or check connections
@@Macca1993bro thank you my friend needed this here had the same issue
Me too
I have hurtle 36v an it says e3 won't even cbarge???
What was the problem same thing as mine
I have Mercane wildewheel PRO scooter showing (ER) on the screen,,started but not accelerating..Any help from anyone please?,,i can pay once repaired..
Mine was fully charged and suddenly turned off as i was using it going 10 mph and wont turn back on at all.
same bro, u fixed it?
me too bro
Please how to fix error 40 on xiaomi electric scooter 1s what's error 40?
What make is this
Helpful
I can't get mind to start I got up to 15 to 20 miles an hour
You are not fixing anything here. It is VERY unlikely that the issue was this blue connector.
More likely to be one of the electronic boards or the battery.
Enough with the screw removal
Jesus. Turn the effing music off and learn to speed up.
My scooter won't turn on ND I charged it
Why is my scooter flashing 3
J'ai un problème avec le scooter Xiaomi Pro 2. Il dure longtemps lorsqu'il est allumé et dure longtemps lorsqu'il est éteint. Après cela, il s'allume tout seul et je ne peux pas changer de mode ni régler l'éclairage. une solution?
My scooter works and turns on but when I try to make it use the go throttle it doesn’t move and it feels like something’s holding it back
Same
Same edit it blacked out😢😢😢
Could be on walk mode
Press on the press on button 2 to 3 times after on
My does the same kinda...it turns on, the display goes crazy and when the throttle is engaged it resets its self...so I go no where
The music is so annoying
My charging isn't working
Yes
My scooter is a turd
my electric scooter went out of power
Then charge it
Yes, without the battery connected it won’t turn on… not sure your point there?
9060 Ruecker Burg