Putting the cable through the hole was a massive pain in the butt lol, and I couldn’t even take the top screw off. Am too weak 😂 took me like 40 minutes to do it but got it done in the end
Hey! Thanks for the video, i sometimes get error14, especially after going over bumps. From the other comments i read, there might be only a bad connection, so i can try unplugging and replugging the wires first. However, i have a question about the plastic screen cover, it seems to click in place, but also has some adhesive. Should i add some?
Mohon bantuannya, scooter mijia clone 36 v, saat di nyalakan beberapa saat kemudian mati waktu di kendarai, tapi setelah sekitar setengah jam bisa hidup lagi, sebelum mati ada pada screen ada indikator 5E, 7E dan gambar tang warna merah, terima kasih 🙏
Hello, please I have a question. my scooter is like yours, I bought it on Amazon 6 months ago. for 1 month when I ride with my scooter there is a resistance on the front wheel as if it is braking but the thrust of the motor forces it to roll and when the device is turned off, the front wheel always has resistance and does not poop because there is no speed on the device. what could be the cause please???
Remove the second top small plastic piece and remove two bolts (top and bottom) and then remove front head light, this will provide you with space you need.
@@ahmadnaser365 did you connect it properly? check every thing! and make sure that the handle don't stick close to the accelerator when you turn it on!
Thanks 👍 this will be fun after replacing both tires of my daughter's step. But i am wondering if there is a power connector that we should disconnect first, before disconnecting the others. It was not so clear why you disconnected most of them, was it for an electrical safety or just to have better access?
@@effedrien it's doesn't matter how do you disconnect them, just turn off the scooter and disconnect.. nothing will happen, if you do it correctly (i mean no wet hands, hawk tuah on the contacts) 👍 but if you are aware, disconnect the battery block.
@@RMFUNTIK I was afraid that if I turn off the scooter, there is still power on that little PCB, although the display is off. In that case it could make short circuit if it touches metal while it is hanging loose. So I thought maybe you disconnected the others for that reason 🤔
@@RMFUNTIK😂 it's because for us 'scooter' refers to those that have a seat, for the ones without seat we use another word. The French have a funny word for it ' trottinette' and in Dutch it's called 'step'. I also didn't know in English it's called both scooter 😅
@@RMFUNTIKhello i need you're help, i have one like this in the video it didn't show me error 14 or beep sound or something, she's just not moving when i press the accelerator, what should i do ?
I managed to replace my Throttle/accelerator in about 20 minutes. Thanks for your video.
Nice work!
I was so worried I had water my money but thanks to this guy I can easily fix it noe
@@lauraashley3233 you are welcome.
3:10 Any tips for this part?
Edit: I put a string around the white connector and pulled it from the other side
Putting the cable through the hole was a massive pain in the butt lol, and I couldn’t even take the top screw off. Am too weak 😂 took me like 40 minutes to do it but got it done in the end
Hey guys good tutorial thank you for the help one question what is the yellow and the white wire goes for
@@vladimgl light
Hey! Thanks for the video, i sometimes get error14, especially after going over bumps. From the other comments i read, there might be only a bad connection, so i can try unplugging and replugging the wires first.
However, i have a question about the plastic screen cover, it seems to click in place, but also has some adhesive. Should i add some?
@@vladutz8 it doesn't have a click, it's sitting on a adhesive tape.. if it's sticky don't apply, if it's not apply ..
Good job 🎉
@@baktirzade thank you
It works with a trigger throttle? Beacuse i want to install a trigger throttle to my iscooter.
Thanks. Much appreciated.
your welcome!
is it color coded the wire that you disconnected?
i might end up connecting the wrong wires...
They are all different. You can't mess up.
Posso sapere che brugola hai usato la misura ?
4-5
how can i finf this product? is there a link for this?
try ebay: xiaomi throttle
@@RMFUNTIK thanks
@@mehmetrizelioglu756 your welcome1
I have a break on both sides, can I still change the gas?
Mohon bantuannya, scooter mijia clone 36 v, saat di nyalakan beberapa saat kemudian mati waktu di kendarai, tapi setelah sekitar setengah jam bisa hidup lagi, sebelum mati ada pada screen ada indikator 5E, 7E dan gambar tang warna merah, terima kasih 🙏
Hello, please I have a question. my scooter is like yours, I bought it on Amazon 6 months ago. for 1 month when I ride with my scooter there is a resistance on the front wheel as if it is braking but the thrust of the motor forces it to roll and when the device is turned off, the front wheel always has resistance and does not poop because there is no speed on the device. what could be the cause please???
I don't remember, it was the fuse on the bms, or the ripped battery cell connection..
@RMFUNTIK do u know the fix because it's the same wi mine
Hi, ich habe den Gashebel gewechselt und der Fehlercode ist weg. Aber der Scooter nimmt kein Gas an. Woran kann das liegen ?
hast du es richtig ausgetauscht? Beschleuniger defekt?
@@RMFUNTIK keine Ahnung hat mein Sohn gemacht. Sieht aber erst mal alles ok aus. Wie gesagt der Fehlercode ist ja auch weg.
i cant get the throttle cable throught the hole my tweasers dont help plz help me out bro
Remove the second top small plastic piece and remove two bolts (top and bottom) and then remove front head light, this will provide you with space you need.
I changed the accelerator pedal and the error code did not go away. What should I do?
was your error code 14?
@@RMFUNTIK yes it's error 14
@@ahmadnaser365 did you connect it properly? check every thing! and make sure that the handle don't stick close to the accelerator when you turn it on!
What's the F2 error code?, after I replaced the accelerater at first it was E2
Well done...
Thank you.
Thanks 👍 this will be fun after replacing both tires of my daughter's step. But i am wondering if there is a power connector that we should disconnect first, before disconnecting the others. It was not so clear why you disconnected most of them, was it for an electrical safety or just to have better access?
@@effedrien it's doesn't matter how do you disconnect them, just turn off the scooter and disconnect.. nothing will happen, if you do it correctly (i mean no wet hands, hawk tuah on the contacts) 👍 but if you are aware, disconnect the battery block.
@@RMFUNTIK I was afraid that if I turn off the scooter, there is still power on that little PCB, although the display is off. In that case it could make short circuit if it touches metal while it is hanging loose. So I thought maybe you disconnected the others for that reason 🤔
No there is no power.. (i guess :D) i disconnect them because of the convenience, i need to remove them out of the way to replace throttle..
@@RMFUNTIKThe error message is gone after i opened it and fiddled with the wiring 😁
@@effedrien sometimes it happens.. yes..
Ok well done
Thank you
i still need help can you help me plz brother i would appreciate
in what regard?
What is the drill called please
drill? bosch.
Thanks, but im still scared 😭
Of what ? 🤣
c'est une trottinette pas un scooter. jais une Xiaomi pro 2, et un scooters? je sais voir la différence
Don't understand, sorry.
@@RMFUNTIK😂 it's because for us 'scooter' refers to those that have a seat, for the ones without seat we use another word. The French have a funny word for it ' trottinette' and in Dutch it's called 'step'. I also didn't know in English it's called both scooter 😅
Hello
hi
Fix the Gas ed4
What is you replace the throttle body and it still does not work still shows the error code 14 ?
check wires, connectors, faulty throttle.
@@RMFUNTIKhello i need you're help, i have one like this in the video it didn't show me error 14 or beep sound or something, she's just not moving when i press the accelerator, what should i do ?
@@mohamedousalh9333 needs inspection.