Yes the only other thing that needs to be noted is there seem to be a lack of beer Can I suggest that when your down to the last box ...... buy 2 more boxes you never know when covid could hit again. Great vid Gaz
Never had one of those apart but very good to see how one comes apart in case mine goes. I have rebuilt a couple pull starts on small engines that was kinda similar with the little fingers that pop out and grab the flywheel.
Is the clutch side connected to oil reservoir tank? When I fill my clutch up the oil reservoir level rises. I don’t get it because I would think they are isolated from each other
It sounded like you were listening to KSHE 95. Are you from the St Louis area? Also you work on stuff the way I do, with a beer in your hand and good music on the radio.
Awesome video! I have an 06 LTR 450, my battery won’t charge, I was told my my mechanic it is most likely my stator have you ever had this problem? What else could it be? How often would you recommend adjusting the valves I have owned it for about 7 months and I haven’t bothered to adjust them.
11:55 did you use loctite on the screws? I did'n do it on mine and about a month later they came loose and destroyed the stater/generator and flywheel on my quad.
You drained the engine oil On the clutch cover should be a sticker that says 400ml And then the oil tank in front of motor by rad that takes 1200 ml Def not enough oil in that machine
I have a start problem this times and was wondering wich part was involved. Hope its same as yours cause its cheaper than i expected ! I could talk hours with you if i could on LTR but the language bariere is a real problem to me (sorry for my vocabulary)
The only special tool I needed was the flywheel puller. If you search Amazon for ltr flywheel puller it should come right up. That’s how I found mine. Otherwise just normal shop tools
Bogdan Tsymbalyuk Does it sounds one way and not the other? Also, when I spin the flywheel it doesn’t spin easy because of the compression. There’s resistance for sure
Mine spins pretty free if that’s the gear your talking about. One way it won’t (if your starter clutch is working the way it’s suppose to) and the other way it should be free. If not might have something jammed in there. I see a lot of these actually come apart and throw pieces all over inside there. I got lucky and mine stayed together.
Wes Grippin the person I bought it from didn’t change the gasket but put gasket maker making it too tight on the wheel. Order new ones so hopefully everything else is good
Thanks for letting me know there are other guys like me out there having fun making videos about quads
This vid gets 10 out of 5 start rating. Cracking up at commentary
Legend walk through vid just diagnosed and replaced mine with the help of your video 👌👌
Yes the only other thing that needs to be noted is there seem to be a lack of beer Can I suggest that when your down to the last box ...... buy 2 more boxes you never know when covid could hit again.
Great vid
Gaz
I’ll definitely add to the beer can collection
Never had one of those apart but very good to see how one comes apart in case mine goes. I have rebuilt a couple pull starts on small engines that was kinda similar with the little fingers that pop out and grab the flywheel.
Billy Ford actually that’s a great point. It’s pretty much the same idea as you would have on a recoil for a small engine.
I love that center pipe on your quad! It looks sweet and sounds awesome.
Thanks!
Excellent video bro, informative and funny.
“We got a 50/50 chance of catching corona “ ahh fuck it “😂😂💀I like that that’s me when I also got my new battery for my ltr in the mail
🤣🤣🤣 I cant tip toe around this god damn virus anymore LoL
More Neighbor Please... Love the lift, we love ours.
That’s one good American Flag there!! Good vid as well. Lol
HEY GREAT VIDEO I SEE YOU DRAINED THE OIL AND ADDED OIL BACK INTO THE STATOR SIDE. IS THIS OIL NOT THE SAME AS THE ENIGNE OIL.
Is the clutch side connected to oil reservoir tank? When I fill my clutch up the oil reservoir level rises. I don’t get it because I would think they are isolated from each other
What was that black tool thing you were using at11:58 in
It sounded like you were listening to KSHE 95. Are you from the St Louis area? Also you work on stuff the way I do, with a beer in your hand and good music on the radio.
I’m near Albany, NY
Awesome video! I have an 06 LTR 450, my battery won’t charge, I was told my my mechanic it is most likely my stator have you ever had this problem? What else could it be? How often would you recommend adjusting the valves I have owned it for about 7 months and I haven’t bothered to adjust them.
Great personality bro. Cheers
Same problem with my raptor...and I have yet to fix it..
just did that on my 400 ltz all the steps are about the same do you really need oil it the casing?
Maybe not but I didn’t wanna take the chance
thanks
This might be a dumb question. Does the starter clutch draw oil from the engine or is it s3perate?
11:55 did you use loctite on the screws? I did'n do it on mine and about a month later they came loose and destroyed the stater/generator and flywheel on my quad.
IC C I didn’t but now that I’m reading this I’ll double check them and put some on
That shop is sweet that's my dream detached away from everyone
Alex Markey I spend more time in there than I do that house
You drained the engine oil
On the clutch cover should be a sticker that says 400ml
And then the oil tank in front of motor by rad that takes 1200 ml
Def not enough oil in that machine
What tool did you use to remove it?
Mine has the same sound but only when it starts and when I kill it is it still the one way?
Thanks for sharing this ! 🤙
maurice ChocoSuisse you’re welcome. Thanks for watching
I have a start problem this times and was wondering wich part was involved.
Hope its same as yours cause its cheaper than i expected ! I could talk hours with you if i could on LTR but the language bariere is a real problem to me (sorry for my vocabulary)
@@Wgrippin finally ordered, cant wait to work on this... 2 weeks till the answer
What brand and weight of oil did you use?
I use belray mineral 10-40
The procedure its the same for 400z ? I need to replace it and want to know if the replacement procedure its the same like that
I think the 400 z is going to be different but it’s probably similar
“It’s a crime to pay more than a dime” 😂
🤣🤣 you noticed
how is it working passing 1 year ????
What tool did you use to get the starter clutch out
Talk to us
The only special tool I needed was the flywheel puller. If you search Amazon for ltr flywheel puller it should come right up. That’s how I found mine. Otherwise just normal shop tools
Was the nut on the flywheel reverse thread?
No sir.
When you spun the fly wheel with your hand. Mine doesn’t spin. Can you tell me what is going on with mine?!?!
Bogdan Tsymbalyuk Does it sounds one way and not the other? Also, when I spin the flywheel it doesn’t spin easy because of the compression. There’s resistance for sure
Could you send me the link where you bought it please
I just searched for ltr flywheel puller on Amazon and a bunch come up
So is that a bearing u replaced
No bearing. It kinda looks like one but it’s the starter clutch.
What size is that flywheel puller?
38mm
Thank You Brother
what size/thread it that fly wheel puller?
91MustangGT21 38mm I just searched for Ltr fly wheel puller one amazon and it listed a bunch
Not the fly wheel but the gear on top of the fly wheel
Bogdan Tsymbalyuk the one between the flywheel and the starter gear?
Mine spins pretty free if that’s the gear your talking about. One way it won’t (if your starter clutch is working the way it’s suppose to) and the other way it should be free. If not might have something jammed in there. I see a lot of these actually come apart and throw pieces all over inside there. I got lucky and mine stayed together.
Wes Grippin the person I bought it from didn’t change the gasket but put gasket maker making it too tight on the wheel. Order new ones so hopefully everything else is good
Wes Grippin and that’s a reason why my compression is bad right?
Is your compression bad?
I am giving one tomorrow for a steal because of the same thing