I'm here to share my irritating experience with this and the fix I found. 01 ford f250 v10 Would drive fine but when I came to a red light my truck would randomly shut off Over drive would flash upon start up Code would be po720 After months of chasing this problem I found the brake pressure sensor attached to the master cylinder had aloud brake fluid into the connector. I didn't think it was the problem just thought I should fix it anyway. But low and behold the random shut offs were fixed. Hope this helps.
I just put dialectic compound on the connection of my brake pressure sensor, fired it up, and the misfire at idle went away. Thanks for the tip, I guess I know what I’m working on next
It was from a dead stop on a hill, so not more than 5-10 mph. There was a resolution and I hope to have a video demonstrating it on Sunday when I get back to that shop.
I'm here to share my irritating experience with this and the fix I found.
01 ford f250 v10
Would drive fine but when I came to a red light my truck would randomly shut off
Over drive would flash upon start up
Code would be po720
After months of chasing this problem I found the brake pressure sensor attached to the master cylinder had aloud brake fluid into the connector.
I didn't think it was the problem just thought I should fix it anyway.
But low and behold the random shut offs were fixed.
Hope this helps.
I just put dialectic compound on the connection of my brake pressure sensor, fired it up, and the misfire at idle went away.
Thanks for the tip, I guess I know what I’m working on next
Me too, waiting for part to. (Praying there is a part 2 also!)
Part 2 just uploaded, more parts to come
Keep em coming 😉👍
Dylan,
Part 2 is up and you can see my ugly.mug explaining how badly I'm getting my butt kicked 😖. More parts to follow
Waiting for part 2...
😉
It's coming Luis. There will be more than just part 2...
Do you remember the approximate vehicle speed at each of the two waveform captures.
It was from a dead stop on a hill, so not more than 5-10 mph. There was a resolution and I hope to have a video demonstrating it on Sunday when I get back to that shop.
Thanks. I'm placing my bet on a ~60hz signal being induced into the speed sensor wires. I'll be eagerly awaiting the resolution.