Would be cool for the larp I play in, but they don't allow removable mags. I wonder if it would be possible to load from the top with the bolt pulled back.
Doesn't look like it. The top looks closed. You can, however, top load a Caliburn U. You also might be able to single load this with the bolt pulled back.
Take a look at 2:09 I think if you were to cut away some of the rail/the black bit you could definitely single load from the top, at least with half lengths. You could probably also cut down the talon mag to be flush with the bottom of the adapter to give you that flush bottom plate and a realistic capacity. I really want to see a wood stock for this system personally
2:14 I'm guessing you're referring to the Russian revolution of 1903 if you're calling bolt-action "Very Civil War Style," 'cause you aren't referring to the American Civil War.
I'm mostly interested in this one because it feels a little awkward to use a pump-action while prone or resting on a bench. Not really so much for the tactical value, just that sometimes I enjoy a little low-stakes target practice while I chill out on the ground.
I just have a penchant for bolt actions. The two blasters I have modded so far are internal swaps of the Longshot and Longstrike. I'm also hunting for a rival Jupiter to convert to a half length inline clip. Lol
Really appreciate that added angle on bolt actions for accessibility for people with injuries and the like making dominant form factors not doable. That and your comments on Hyper ammo in regards to environment and animal safety are big things I love about your channel, really inclusive and important details a lot of channels never mention.
I was actually thinking it looked a lot like the Widow from ME2 and 3. And between this and the Swift, it's a good year for Mass Effect looking blasters.
I need a bigger stock, scope, and bipod for this lol. i can finally live out the dream of having a bolt action nerf rifle... that can actually hit targets!
Bolt action rifles did exist, actually the first bolt action rifle was the Needle rifle made in the 1830's but they were not in the USA Ironically the US government did buy a couple hundred Greene bolt action rifles in 1863 but they never issued them so they stayed in the national armory until after the war
@@dangermode9762 not really. The bolt would accept the next round, chamber it, and then have an open slot at the top for a pusher trigger to send into the flywheels. Gonna make it out of Legos and plexiglass.
@@kialmaynard5176 The appeal of a bolt action is the sense of making shots count, without fuss. Flywheels are noisy and overall inaccurate compared to well-tuned springers, so springer is more viable.
Does he have any plans for a southpaw variant? I love the feel and aesthetic of bolt actions, but as a Lefty, it's pretty awkward to use a standard bolt action
Just built one this weekend with the K26 option for the spring and I can not express enough how awesome it is with that spring. The prime on the K26 is smooth and easy and I find it more bearable after several shots compared to the Nexus Pro. I need to get a real chronograph as my home built Arduino based single gate chronograph registers at 280+ fps (it was calibrated for half dart size). Now mine does seal really well as I believe that my printer was slightly extruding on the plunger head print. I do want to say that it is absolutely awesome that you did a review on this right after I built one!
Im excited to get ahold of one, part of why the Ultra Pharaoh is such a good blaster in my hands is because i also have a really bad left arm. So this excites me in the same way
I have a K26/18in barrel that hits ~220fps. Also recommend the alternate bolt handle in the file set, I find it a little more comfortable since it doesn't have any sharp edges that would feel a little rough during use
This is cool but still prefer the Ultra Pharoah with short dart kit. Primes easy (due to geared prime, not direct), hits much harder (with upgraded Kronos spring) & injection molded durability. Although Indra looks better imo
How are you not stripping your gears though? That seems to happen with strong spring on plastic gears, hence why most hard hitting blasters are direct prime
Hey drac, I was curious on what’s going on with endear this year? I absolutely love the event (I attended in ‘18 and ‘19) and can’t wait to get back to the fun!
Yes this is true. Just a fun fact I thought I might add, did you know there existed a few bolt action single shot rifle designs at the very end of the Civil War? One example would be the palmer carbine, which though had 1000 models produced in 1865, was sadly delivered to the union army a month after the war had ended. It is funny to imagine going through the trouble of making a rifle bolt action just to have it be single shot. I'm sure this did still vastly improve reloading and firing times though.
Did he say..... Civil war style??.... AS A HISTORY BUFF ILL HAVE YOU KNOW THAT ALL GUNS USED IN THE CIVIL WAR WERE MUSSEL LOADED (with the exception of revolvers and the Palmer bolt action....and maybe the lynx but I don’t think it was used)
I loved the one arm info... I have one arm so would love tips from anyone on which printable models you can do with one arm, even if using your chest, shoe or the ground to prime etc! Pleeease. :)
This could be great for me once i save up the dosh, left arm kinda screwy since last feb, but hey guess thats what happens when you get ran over by a car 🤷
I really think she knows what she's doing getting in the way of way of shooting. I think she is laughing inside haha. She does it way to often in too many videos for it to not be on purpose. lol
I just got my Hyper Siege-50 today and I’m still not sure how I feel about Hyper lol. Definitely not what I did when I tried out my first rival for the first time many years ago that was way more exciting.
There are new files that fix that as of today. I made mine catch by "squaring" the spring end that goes into the but section of the blaster. I also flared it slightly as well.
I like it but I liked it when I saw it originally when it was being design I'll probably pick one up here in a couple weeks to maybe a month when I feel as though 90% of the rest of the bugs are worked out like the barrel wobbling back and forth and stuff like that but it definitely is my style in my taste maybe I'll even have you build one for me LOL
Hi Lord Drac! Are the files in thinngyverse? I would Love to experiment with the platform. Do you know Captain Slug in person? (I think Slug ist the best nerf desinger out there). And Drac i think you are the best modder in the Community. Your stryfes sanguinne and cortana are the most beautiful blasters i have ever seen. And even your 3d-printed blasters are looking like some piece of art! You are so cool man, never stop doing your thing please! 🙂👍
I am absolutely thrilled that the “Slug Category” is basically an official thing now. So, so happy.
Would be cool for the larp I play in, but they don't allow removable mags. I wonder if it would be possible to load from the top with the bolt pulled back.
Doesn't look like it. The top looks closed. You can, however, top load a Caliburn U. You also might be able to single load this with the bolt pulled back.
Take a look at 2:09 I think if you were to cut away some of the rail/the black bit you could definitely single load from the top, at least with half lengths. You could probably also cut down the talon mag to be flush with the bottom of the adapter to give you that flush bottom plate and a realistic capacity. I really want to see a wood stock for this system personally
You could remix the magwell to just be two halves of a tray that's open on-top. The CAD files are public now.
Hey Drac, I've noticed the Foamproshop site isn't working. Is it currently closed?
I was just on slugs website so I thought this gun has been out for a while
Only a few weeks
2:14 I'm guessing you're referring to the Russian revolution of 1903 if you're calling bolt-action "Very Civil War Style," 'cause you aren't referring to the American Civil War.
I'm mostly interested in this one because it feels a little awkward to use a pump-action while prone or resting on a bench. Not really so much for the tactical value, just that sometimes I enjoy a little low-stakes target practice while I chill out on the ground.
I just have a penchant for bolt actions. The two blasters I have modded so far are internal swaps of the Longshot and Longstrike. I'm also hunting for a rival Jupiter to convert to a half length inline clip. Lol
Really appreciate that added angle on bolt actions for accessibility for people with injuries and the like making dominant form factors not doable.
That and your comments on Hyper ammo in regards to environment and animal safety are big things I love about your channel, really inclusive and important details a lot of channels never mention.
For those speculating about the name, the M90 Indra is a sniper rifle in Mass Effect 3, which has a very similar profile.
I was actually thinking it looked a lot like the Widow from ME2 and 3. And between this and the Swift, it's a good year for Mass Effect looking blasters.
@@Balmung60 I agree that it looks more like the Widow (including the bolt action mechanism). Maybe the designer just thought Indra sounded cooler.
I can definitely see it, but the javelin could also be an inspiration.
@@matthewsmith6057 I actually wouldn't be surprised to see a full Widow cosmetic kit for the Indra before the year is out.
I didn't design it to look like any asset in particular.
I need a bigger stock, scope, and bipod for this lol.
i can finally live out the dream of having a bolt action nerf rifle... that can actually hit targets!
Hello, pls do more integrations I love does videos. :)
Same
I dont even play nerf but i want this. Also maybe the chrono was set to
mps instead of fps 64 mps is 209 fps.
It definitely was, folks are getting way over 200 with this
Have you considered that the Endra shoots light and you're changing its behavior by measuring it?
It lets you use your dominant arm,
sad lefty cries
welcome to bolt action worlds, they hate us lefty :(
Its reversable
the world is constantly against us
@@paedae16 is it? genuinely?
Just need to have to mirror a piece to make it lefty
today i learned i'm weird for preferring my bolt priming flipped to the left
2:16 There were no bolt-action rifles in the Civil War. Most bolt-action rifles didn't begin to crop up until the late 1880's as far as I know.
Bolt action rifles did exist, actually the first bolt action rifle was the Needle rifle made in the 1830's but they were not in the USA
Ironically the US government did buy a couple hundred Greene bolt action rifles in 1863 but they never issued them so they stayed in the national armory until after the war
The sound when it shoots, that little pop is fantastic
I love bolt action, as always well done slug
Can’t wait for when mine ships.
In addition to a Hyper PP Bizon, I want to build a bolt action flywheel hyper Blaster.
that’s not how that works...
It'd have to be a springer
@ it's what my brain thinks will work. We shall see. I already made a Lego flywheel pistol.
@@dangermode9762 not really. The bolt would accept the next round, chamber it, and then have an open slot at the top for a pusher trigger to send into the flywheels. Gonna make it out of Legos and plexiglass.
@@kialmaynard5176 The appeal of a bolt action is the sense of making shots count, without fuss. Flywheels are noisy and overall inaccurate compared to well-tuned springers, so springer is more viable.
“While it might not have hopped out of the Rig Veda” I’m dying lmaooooooo
Any chance you where in meters per second rather than feet?
Does he have any plans for a southpaw variant? I love the feel and aesthetic of bolt actions, but as a Lefty, it's pretty awkward to use a standard bolt action
Its reversible
You can request left-handed when you order it. Only the "Bandle" print needs to be mirrored in the slicer to make it left-handed.
Slug’s prototypes are great until you get to the FPS! LOL!
I think if you have to buy prints and don't have your own printer to go directly to Silver Fox industries and only them.
When are you planning on doing a review of the yehw out of curiosity Drac?
Could you maybe review the eaglestone shooting target and blaster on Amazon? I don't want to get the game but it'd be fun to watch a review of it
Why does this remind me of Izanagi’s Burden
Drac looks like a nerd version of young Justin Bieber during this video
One positive is that you can cut off most the barrel and have a very good sidearm.
Ok why would you carry a *B O L T A C T I O N S N I P E R* as a secondary?
@@kukrireal MLG pro quickscoping
Bolt Action is a simple case of rule of cool for me personally. Definitly gonna keep an eye on that one!
Just built one this weekend with the K26 option for the spring and I can not express enough how awesome it is with that spring. The prime on the K26 is smooth and easy and I find it more bearable after several shots compared to the Nexus Pro. I need to get a real chronograph as my home built Arduino based single gate chronograph registers at 280+ fps (it was calibrated for half dart size). Now mine does seal really well as I believe that my printer was slightly extruding on the plunger head print. I do want to say that it is absolutely awesome that you did a review on this right after I built one!
Im excited to get ahold of one, part of why the Ultra Pharaoh is such a good blaster in my hands is because i also have a really bad left arm. So this excites me in the same way
yess
I have a K26/18in barrel that hits ~220fps. Also recommend the alternate bolt handle in the file set, I find it a little more comfortable since it doesn't have any sharp edges that would feel a little rough during use
I NEED IT!
This is cool but still prefer the Ultra Pharoah with short dart kit. Primes easy (due to geared prime, not direct), hits much harder (with upgraded Kronos spring) & injection molded durability. Although Indra looks better imo
How are you not stripping your gears though? That seems to happen with strong spring on plastic gears, hence why most hard hitting blasters are direct prime
Gosh, I love the Caliburn
This looks like the fix by q.
Hey drac, I was curious on what’s going on with endear this year? I absolutely love the event (I attended in ‘18 and ‘19) and can’t wait to get back to the fun!
Good god if all of these great 3D printed blasters keep coming out I might need to buy a 3D printer
Do it
@@CaptainSlug Holey crap hi!....im not sure if I can say no now to the king of 3d printers lol!
You owe it to everyone to throw a more powerful spring in and test more variety of darts.
Not really Civil War style, more like 1903 Springfield Rifle sniper.
laughs in de Lisle carbine
Ya only 1860 bolt rifle i can think of is the green rifle lol
Hi good vid
Civil war style? Oh no no no...Bolt actions weren't widely used till WW I. Civil War Style would be full on Musket or Lever Action.
Yes this is true. Just a fun fact I thought I might add, did you know there existed a few bolt action single shot rifle designs at the very end of the Civil War? One example would be the palmer carbine, which though had 1000 models produced in 1865, was sadly delivered to the union army a month after the war had ended. It is funny to imagine going through the trouble of making a rifle bolt action just to have it be single shot. I'm sure this did still vastly improve reloading and firing times though.
@@Fiddlesticks63 The Henry Lever Action was still much faster ;)
This looks like something that could be used at a regular nerf game
Seems like your chroney was...... jinxed.....? YEEEEEEEEEEAAAAAAAAAAH 😎
Early
Hello
Hello
Hi
Did he say.....
Civil war style??....
AS A HISTORY BUFF ILL HAVE YOU KNOW THAT ALL GUNS USED IN THE CIVIL WAR WERE MUSSEL LOADED (with the exception of revolvers and the Palmer bolt action....and maybe the lynx but I don’t think it was used)
100th comment lets go
This is just plain amazing
Slug really outdid himself this time
I just got my Nerf hyper siege-50 today, I look at that and I wonder will that shoot hyper rounds
"Laser rifle kinda vibes"
*Me sitting here questioning the tac rails I added on my Galil Ace*
I just imagine every "sniper esq" foam blaster that feeds half lengths as just a sniper feeding 9mm
close quarter sniping lol very COD...
I loved the one arm info... I have one arm so would love tips from anyone on which printable models you can do with one arm, even if using your chest, shoe or the ground to prime etc! Pleeease. :)
Remember when you made that video about shooting cheese ball out of rival guns you should try it again 👌😂👌
So, i wanna make one of these, i found the files, but I am having a hard time finding the hardware. Anyone know where i should get it?
Hopefully I see the dude I talked to add the goodwill in the comment section.
Day 1 of asking drac to show us the ollllll home made caliburn with cherry wood from eight years ago just a lil peak
This could be great for me once i save up the dosh, left arm kinda screwy since last feb, but hey guess thats what happens when you get ran over by a car 🤷
Would anyone be kind enough to tell me what song Drac used in the Closer Look segment?
I can't wait to not buy one of these lmao
I really think she knows what she's doing getting in the way of way of shooting. I think she is laughing inside haha. She does it way to often in too many videos for it to not be on purpose. lol
Captain America Civil War so much off the phone to
lord drac i watched another video from dr flex it is sopose to be 170fps
Maybe something happened to the chronograph.
I prefer the Indra aesthetics than those of the Caliburn.
wonder if I can tweak this to have a G3 style bolt...
Damn, that thing looks sweet!
If this becomes more than a prototype (and eventually gets a stronger spring), I wanna get a bayonet attachment.
That dog really likes getting shot at huh?
He's just interested in the new nerf guns
He refuses to fire at Jynx. To do so would be animal cruelty.
Maybe the issue at the end is the chronograph is messed up?
Hey Drac can you show off your watch collection?
I can hear it screaming for a metal bolt from Australia
2:08 the little kid in me just went ballistic and I now must have one
Was at a Walmart in canada a day ago and seen a nexus pro on the shelf after so long.
My guy civil war was muzzle loaders xD
No that's rev war it was in 1870 or so and as a nerd explainion 30 years before rdr2
@@EXTRON240 just making sure your not saying the Rev war was in 1870
@@EXTRON240 muzzle loaders were used as well tho, in combination with other types of firearms
If only nerf could do this
I just got my Hyper Siege-50 today and I’m still not sure how I feel about Hyper lol. Definitely not what I did when I tried out my first rival for the first time many years ago that was way more exciting.
Ahh all we need now is the Ashura Caliburn.
i wanna see 6 round talon mags for guns like this
*Sniper class unlocked
I love bolt actions and have wanted to find a short dart one too.
Gives me Bueowulf TCR vibes
How does everyone KEEP FREAKING MAKING ONES THAT CAAAAAAAAAAAAATCH
There are new files that fix that as of today. I made mine catch by "squaring" the spring end that goes into the but section of the blaster. I also flared it slightly as well.
I just realized I have the same mag as him
This looks like a k14 sniper rifle
Could you sell this on foam pro shop
nice. can it be converted to lefties?
I like it but I liked it when I saw it originally when it was being design I'll probably pick one up here in a couple weeks to maybe a month when I feel as though 90% of the rest of the bugs are worked out like the barrel wobbling back and forth and stuff like that but it definitely is my style in my taste maybe I'll even have you build one for me LOL
Drac, I do like the Rolex.
Rule of Cool goes brrrrrrrrrrrrr
Cool elevator music
Very clean build!
It definitely needs more power but I love the style of it
Gave it a like for Jinx. Lol
Man I. Kinda want this
I love bolt action
Hi Lord Drac! Are the files in thinngyverse? I would Love to experiment with the platform. Do you know Captain Slug in person? (I think Slug ist the best nerf desinger out there).
And Drac i think you are the best modder in the Community. Your stryfes sanguinne and cortana are the most beautiful blasters i have ever seen. And even your 3d-printed blasters are looking like some piece of art! You are so cool man, never stop doing your thing please! 🙂👍
We've met. www.thingiverse.com/thing:4856775
This is beautiful