Caliburn 4 BUILD GUIDE
HTML-код
- Опубликовано: 3 июл 2024
- The Caliburn 4 is the latest version of Captain Slug's 3D-printed springer platform. Featuring aluminum flat bars instead of U-channel or threaded rod, the Caliburn 4 is a rock-solid blaster. Finally, over a year after selling Slug's licensed designs, we're publishing a build tutorial video in our trademark "crystal clear" style.
• • •
Want to get a Caliburn 4 of your own? Check out our options available on the shop!
outofdarts.com/products/elite...
Need help with tuning and maintenance? We've got a Tips & Tricks video over on our second channel!
• Caliburn 4 Tips, Trick...
Want more foam-flinging content? Subscribe to our once-monthly Newsletter!
outofdarts.com/pages/e-mail-s...
Have questions about a product? Need help modding your blaster? Shoot us an email!
orders@outofdarts.com
Follow me on Instagram for sneak peeks:
/ outofdarts
For everything else, find us at:
outofdarts.com
• • •
FAQ & Corrections:
•
• • •
Chapter Timecode:
0:00 Opening & Introduction
0:39 Tools Required
1:03 Assembling the Ramcore
2:27 Assembling the Plunger
3:11 Assembling the Front Muzzle
3:44 Assembling the Grip & Trigger
7:04 Assembling the Magwell
9:14 Assembling the Blaster Front
13:29 Installing the Magwell
14:18 Assembling the Blaster Rear
17:09 Assembling the Butt Plate
17:40 Installing the Butt Plate & Spring
18:47 Priming & De-Priming the Blaster
19:16 Installing the Short Dart Adapter
19:47 A Note about the SCAR Barrel
20:00 Installing the Caliburn Sights
20:19 Installing the Included Foregrip
20:46 Fully-Assembled Blaster
21:15 Closing Remarks
• • •
Out of Darts, run by Luke, is a one-stop hobby shop for all things nerf, foam-flinging, and blaster tag. We carry all the supplies, tools, and accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 3D printers. Check out our site below for guides, build lists, and resources.
Edited by J Perry Heun, Out of Darts Media Producer Развлечения
We're catching up on a bunch of old video projects, and much more is coming in the next few months. Stay tuned!
Might a Khaos 3s mod be in the works?
I can't wait for the reveiw of the Unicorn :)
I really like this "simple" design.
Wow Captain Slug is always innovating and changing the Caliburn. I built the older threaded rod version and source my own hardware kit. Seing this newer iteration makes me want to build another one. Good tutorial Luke 👍.
Amazing guide someday ill pick up a caliburn
Just in time I'm about to finish printiny
Yo could you make us a better pump grip for the Ultra 3? I find it to be way too small, I think a vertical or angled grip would help it a lot
How about some videos on other types of mods (e.g. tracer bullets)?
Do you know why this is designed with a tube and a spacer rather than one long tube? I have issues where the plunger head gets stuck inside the coupler and won't go all the way back when I am trying to prime it sometimes. I don't suspect this would happen if the tube was one piece.
What filament to print with? Glass fibre infused plu?
i have just finished my build and tried a test fire but once i pressed fire the dart goes about an inch into the barrel and stops can anyone point me in the right direction please
Hey is the nemesis stock switches able to be used with a 3s lipo I am going to mod one and I want to know if I have to do a switch for it or not
I would have thought the motors would be the bigger concern. Most microswitches and slide switches should be good for 24v at least, far more than a 3s pack.
Who’s watching and didn’t even have the kit😂😂😂
Sadly this is about 3 to 4 years out of date.
Everyone is buying the dartszone pro line. Even the new X-shot longshot
As someone who is working on one of these, I am here to formally state "Nuh Uh"
What your opinion on coop117 quitting RUclips