How do I use Yamaha SX600 as a midi keyboard? I have downloaded the driver, and it's only working as an audio interface. But I need it to work as midi please help
I’m using a Yamaha SX900. I’m following yr video but I’m not getting the signal to record on CUBASE even after selecting digital keyboard for input and output
Hi I have Roland F701 which is connected to my sound interface via the headphones plug. I have additionally conncected the E-Piano directly to my laptop with a midi USB-cable. My problem is that I cant here anything while my E-piano is recognized by cubase elements. Do you have an Idea why?
You need to buy it. As far I know there is no free version. If you want free trail with no save option - check FL Studio, basic principle is the same: Here is the video with PSR Yamah, but with Kawai KDP you do the same way: ruclips.net/video/7hI9B8sUxGQ/видео.html
Hello, really appreciating your recent video. Please could you let us know, how to direct playing midi file (in USB device key) ?. If we have any Midi file from internet, and we would like to play this with the keyboard psr S670. So how to do ?. Many thanks for your help.
I this scenario keyboard works as primary sound engine so you use usb audio recorder or audio interface and capturre output from Yamaha PSR. Soon there will be video about it. Regards
Hi, I hope you are having a great day. I have a problem when I revoice the channels in the keyboard. Every time I select a voice in the revoice screen doesn't use the effects (DSP) parameters that usually comes with them when you select one normally with the right1 or right2 button. I give an example: If I select the voice DistortionWah in the guitars section with right1 button sounds great because of its DSP parameters loaded but when I select the same voice in the revoicing screen in song function sounds different when I send notes with the computer because the keyboard doesn't seem to load the dsp the parameters that usually comes with the voice. Any idea to change that?
Hey. Very good question. There is somewhere a few videos where I am explaining that widely. Without live example but I will try to explain it here. Basically mixer settings (which includes DSP block configuration) are stored within the voice loaded to Memory. After loading a voice they are altering current config (you can see it in mixer/effect) - but they set blocks for DSP2,3,4 for Rigth1, 2 Left , not the Song channel (Part: CH1,2,3,4 etc) I assume you are revoicing existing song, you must me aware that in that case you ale playing via Channel (1..16) not Right1,2,Left Please check this video maybe it give you some inspiration: ruclips.net/video/MkunF2WUwzI/видео.html at 15:12 you can see Part selection In your case you need to setup those DSP block to your Chanels (not R1,R2,Left) and save in Registration memory for fast loading. Remember that while doing this you can not select voices for Right and Left section because it will overwrite it (while loading new voice into memory) If you still have problem - let me know, I will make a special video for you cause this is really challenging question
@@BBWalkerTV thanks for reply! I see. After see the video of DSP now I understand the things a little bit better and what do you mean. So, I need to setup the DSP for the Channels and save them. Do you have a video where I can learn how to use the registration memory for this purpose?
@@BBWalkerTV Thank you but for some reason my sound is not working right and I have a hp laptop 15inch screen, some reason there is no sound coming out at all I have the right driver aso4all that I had to download still no sound
@@ddrusa sory for delay but I receive a lot of comment and sometimes YT skip for some notifications, here is the video where am I explaining it more, ruclips.net/video/FWp3KM33NQM/видео.html second reason why you may have problem is ASIO control panel, you need to setup proper outputs
Nice tutorial, but i have a question. is it possible to send the song I recorded on my Yamaha keyboard to Cubase...all instruments on a separate track instead of on 1 track? When I send the song to Cubase I get all the instruments on 1 track that's not what i won't
yes you can. here is video for FL Studio but it explains how MIDI are sent from Yamaha and how to capture them on separate channels: ruclips.net/video/FWp3KM33NQM/видео.html
That is good question. Both devices you mentioned supports MIDI . According to photos I found on internet R70 has 5-din MIDI sockets. So you need cable like in this video: ruclips.net/video/tnyYANwzuUA/видео.html Yamaha PSR 670 has only type B USB Midi, but PSR-S970 fortunately has both options (5-DIN plus USB Midi) I assume that you want to have the following setup: Next you need to configure channels on Functions / MIDI / RX (receiving) because Yamaha will be "listening" and drums machine will be sending MIDI data. Please give me more details am I right about your setup and than we wil try to do more.
I am using Cakewalk by Bandlab. The DAW program recognizes my PSR S670 but there is no sound and the keyboard does not play in the program. Can you help me solve this problem?
@@BBWalkerTV Hi, thank you, I await your reply. In Cakewalk If I select the digital player for input devices, the keyboard does not play in the program, however, if I select the digital keyboard in the output devices the sounds play through the speakers of my psr s670. Cakewalk is by Bandlab and is a free DAW program
Hi I really like your videos. I am a beginner with this stuff trying to use my Yamaha PSR SX 600 to connect to Cubase elements AI 12. When I connect my keyboard I see Digital keyboard Port 1 - but when I play I don't see the signals . what could I be doing wrong
Can i record audio of my own yamaha piano sound directly into my laptop using usb cable? When i record midi i get a signal. But when i want to record audio i don't get any signals. Any ideas?
No. Becasue Yamaha PSR do not provide audio interface inside. You need external audio interface and grab analog output 1/4 jacks or use usb audio Player and grab wav inside Yamaha. Soon there will video about it. Regards
Great Video - RetiredTech Guy- finally have time to study music theory; learn piano ; Brought a P45 B Yamaha in Nov - I'ml new at this -Will also get into backplay software - music composition comes later- goal now is it play back piano songs ( like the demos on my P45 B )I can download .Does Cubase LE allow me to import "canned " piano arrangements ( classical , etc) and then play back to the P45B . If so what steps are involve with Cubase LE and if so I'll obtain the software - or is there a easy way to import and then upload to the P45B
This will be scenario where keyboard works as a midi controller, there you will find some inspiration: ruclips.net/video/AoAdHlhuEgg/видео.html If you want to record it as WAV you need to grab audio stream from audio interface in DAW. for more scenarios look here: ruclips.net/video/zjyxgW46c44/видео.html
No, you don't need audio interface just pług in the USB midi cable into computer. If you notice latency problems please check this video ruclips.net/video/FYcW7gcN8cc/видео.html
In order to avoid the double voice AKA phaser effect you need to turn off your midi local off. I use Yamaha MODX6 with my Cubase and Logic pro X I had the same problem so that is what I did.
Hi sir, how can I record the original sounds of my digital piano on cubase? because I dont like the sounds of the midi track. I hope you reply, thank you!
U have to buy any audio interface (like Focusrite Scarlett), plug it to USB in Your comupter, then the AUDIO Output of your keyboard plud to input in this interface. Then in Your DAW create AUDIO track (not MIDI), and as input, set your interface (e.g Focusrite).
@@ajgor64 Thank you very much! Is there any way I can record my original digital piano sounds without using an audio interface? a budget way to be precise.
Great videos. I am 74 years old so it takes me longer to digest a tutorial. I have a question. I use a PSR 770, and I have a midi song in my PC's DAW. I was able to separate each sound on different channels corresponding to the equivalent channels in my Yamaha's style creator. I also have separated the sections of the midi tracks I could use for the basic introduction and the basic ending. All this is stored in different midi files with different names. Now, can I use all these midi files by transferring them to the PSR style creator via the same USB cable or through a stick? I have tried to play the files on the PC and try to play the same in the style creator but it is not good. Thanks.
Hello. Thanks for your feedback. Please check this video it's quite long but it should clarify all the stuff you asked for: ruclips.net/video/FWp3KM33NQM/видео.html
Hi sir good morning. Can you please explain about this Qbase software and the required accessories for this. I want to record some songs with vocals. I have Yamaha psr S970.
PSR 970 has pretty same principals like S 670 - it depends if you need to assembly your project on PC and than record vocal or making complete performance with vocal on arranger. In both cases it is good to have separated track for vocal . A few days ago I purchased PSR S975 so soon there will be video about it.
Please tell me what operating system are you using basically there is no need to install driver on Windows 10 and I have tested in on this particular OS. It should be automatically detected by the system without any additional drivers however in your case maybe you need to install something like a midi driver
I use Steinberg ur22mk to record but when i record i have to crank up volume to hear it on the PC ,But when i listen to a video from RUclips it sound normal What am i doing wrong Thanks
Hello sir thanks for the tutorial.i play yamaha keyboard too. I live in a small island mauritius.i would like if you can share the daw cubase with me.thanks
Hey ,your work is so useful and helpful, appreciate it man. Just one quick question. I plugged my psr s670 into ableton. I use the midi sounds in ableton, so is there way to switich off the keyboards sound or do i just have to turn the volume down?
If your device is found as Generic midi controller you don't any special app - just DAW software you like: Cubase, FL Studio, Pro Logic, etc Anvil studio is free
hello and thanks for all the videos my name is David. please just want to ask if it possible of using WAVELAB LE 9.5 Audio Editing and Mastering software which don t have drums groove. can i use psr 670 yamaha with Laptot connections and create a drum groove with the Wavelab. Secondly can i have a private lessons with you
Hello David nice to meet you. Thanks for your comment. About your first question: I need to check this software and than I could give you some info - because I haven't used it. About the second questions: at this moment I am too busy (sorry) for lesson but it may change in the future. Please stay tuned with the channel. If something changes - there will be update here.
Is it possible to convert wave format to style file or ppf and if we play wave file in the keyboard then how to change the tempo. Salute.... and regards
Honestly I have never been making styles using my own wave files into Yamaha but I will look into this topic and as soon as I get some knowledge I will post a video. The thing that I have done is to use my own files to create media-pad bank please check this video: I may be useful: ruclips.net/video/O-QA77qiETU/видео.html
Yamaha Chord Tracker can help you build-up a base for your arrangement , here is the video showing the concept: ruclips.net/video/00tFTUkGSkY/видео.html
Yes but only to recording audio stream (WAV) . I need a convert from Jack 1/4 inch (6.35mm) to Mini Jack (3.5 mm) Audacity does not support MIDI. I will make separate video about free MIDI software that you can use because there are some free alternatives. Please stay tuned. Regards.
I for the life of me cannot get the MIDI keyboard to play notes on the instruments. I don't have this problem in my other DAWs and I can't figure out what is wrong. EDIT: I didn't hit record............well then....😑
My Cubase 10 pro working fine. I upadared to 10.5 but midi input not detect by instruments. PSR device is detected as input, but when I press key in keyboard it does not give signals to DAW instrumnets. Is there any problem with Cubase 10.5? Please help.......
Thank you for the posting. Very informative! 😃
How do I use Yamaha SX600 as a midi keyboard? I have downloaded the driver, and it's only working as an audio interface. But I need it to work as midi please help
Really I love and appreciate ur work... Thank U So Much...
U record it without audio interface?
I’m using a Yamaha SX900. I’m following yr video but I’m not getting the signal to record on CUBASE even after selecting digital keyboard for input and output
Hey please watch this video it explains some aspects of MIDI mapping (IN , OUT and Ports) ruclips.net/video/FWp3KM33NQM/видео.html
Hi
I have Roland F701 which is connected to my sound interface via the headphones plug. I have additionally conncected the E-Piano directly to my laptop with a midi USB-cable. My problem is that I cant here anything while my E-piano is recognized by cubase elements. Do you have an Idea why?
Hiii, very helpful…can you hold it up to a controller…such as also mini… both sides are square…
Thanks very much..for all videos this has been too helpful to me
Thanks for good word. Regards
Can hear yourself play in real time through your computer with Yamaha speakers shut down?
Sure you can. On the channel setting you can enable "monitor"
Wow so much information! in just few minutes,thanks for share.
U are welcome. Regards
How to Control/monitor/ sty channel on psr in Cubase to mix live performance?
Thank you so much you’re a good musical mentor I’ve learned so much because of your videos🙏❤️ Step by step is the best way for me to learn 🙏❤️
U welcome. Regards
Hi, is it possible to delete/add instruments through MIDI?
Sir how to record inbuilt keyboard styles and mulitpad data into the DAW
i need to know this!!!
@@gabrielxaviermusico bro u need an audio interface and a daw bro.
U will be able to record it as an audio clip in the daw.
Style do MIDI is pretty interesting topic for upcoming video - some other people also asked for it
Here is the video you asked for FL Studio. If you like I can create same stuff for Cubase
ruclips.net/video/o46-iH4Dim4/видео.html
@@gabrielxaviermusico Check this video - If you need especially for Cubase - let me know:
ruclips.net/video/o46-iH4Dim4/видео.html
how to u download that app
You need to buy it. As far I know there is no free version.
If you want free trail with no save option - check FL Studio, basic principle is the same:
Here is the video with PSR Yamah, but with Kawai KDP you do the same way:
ruclips.net/video/7hI9B8sUxGQ/видео.html
Very professional, you are really musically gifted my friend!
Thanks for the good word. Regards
for front of house with out affecting musician monitor?
What is the USB Cable that suits for Yamaha PSR E413?
If u find it,can u plz send the link?
Hi good morning, Please let me know need driver software? I have PSR 670 but I can't join KB and computer in Cubase 10.5 with host cable..
Hey. No , you don't need any drivers - everything should be installed automatically via Windows OS.
Hello, really appreciating your recent video. Please could you let us know, how to direct playing midi file (in USB device key) ?. If we have any Midi file from internet, and we would like to play this with the keyboard psr S670. So how to do ?. Many thanks for your help.
How do you export after this to get a final audio
I this scenario keyboard works as primary sound engine so you use usb audio recorder or audio interface and capturre output from Yamaha PSR. Soon there will be video about it. Regards
Really Helped me through!!!
Interesting 😀😀 love it👍👍👍
does the transpose function on the keyboard work???
Sure you can transpose in real time (keys) or later separate channel or whole MIDI (song) file
Sir can psr s 970 use as midi controller in studio one 5...😊
I am pretty sure yes cause it is a MIDI Standard.
@@BBWalkerTV 🥰
Sir thanx for reply. Pls suggest the some suitable and easy software to be used for direct recording from PSR s670 to computer.
Hi, I hope you are having a great day.
I have a problem when I revoice the channels in the keyboard.
Every time I select a voice in the revoice screen doesn't use the effects (DSP) parameters that usually comes with them when you select one normally with the right1 or right2 button.
I give an example:
If I select the voice DistortionWah in the guitars section with right1 button sounds great because of its DSP parameters loaded but when I select the same voice in the revoicing screen in song function sounds different when I send notes with the computer because the keyboard doesn't seem to load the dsp the parameters that usually comes with the voice.
Any idea to change that?
Hey. Very good question. There is somewhere a few videos where I am explaining that widely. Without live example but I will try to explain it here.
Basically mixer settings (which includes DSP block configuration) are stored within the voice loaded to Memory.
After loading a voice they are altering current config (you can see it in mixer/effect) - but they set blocks for DSP2,3,4 for Rigth1, 2 Left , not the Song channel (Part: CH1,2,3,4 etc)
I assume you are revoicing existing song, you must me aware that in that case you ale playing via Channel (1..16) not Right1,2,Left
Please check this video maybe it give you some inspiration:
ruclips.net/video/MkunF2WUwzI/видео.html at 15:12 you can see Part selection
In your case you need to setup those DSP block to your Chanels (not R1,R2,Left) and save in Registration memory for fast loading. Remember that while doing this you can not select voices for Right and Left section because it will overwrite it (while loading new voice into memory)
If you still have problem - let me know, I will make a special video for you cause this is really challenging question
@@BBWalkerTV thanks for reply!
I see.
After see the video of DSP now I understand the things a little bit better and what do you mean.
So, I need to setup the DSP for the Channels and save them.
Do you have a video where I can learn how to use the registration memory for this purpose?
finally worked ... thank you.
Pls advise the software name used in video...
Cubase 10.5 but you have plenty of other options. Regards
Finally a honest video for once I have a m audio 68 keyboard midi usb plug can this work to? hope to hear back from you soon under this comment
Yes, It should work the same way. MIDI is generally a very wide standard.
@@BBWalkerTV Thank you but for some reason my sound is not working right and I have a hp laptop 15inch screen, some reason there is no sound coming out at all I have the right driver aso4all that I had to download still no sound
@@ddrusa sory for delay but I receive a lot of comment and sometimes YT skip for some notifications, here is the video where am I explaining it more,
ruclips.net/video/FWp3KM33NQM/видео.html
second reason why you may have problem is ASIO control panel, you need to setup proper outputs
@@BBWalkerTV Ah ok cool will do
Nice tutorial, but i have a question. is it possible to send the song I recorded on my Yamaha keyboard to Cubase...all instruments on a separate track instead of on 1 track?
When I send the song to Cubase I get all the instruments on 1 track that's not what i won't
yes you can. here is video for FL Studio but it explains how MIDI are sent from Yamaha and how to capture them on separate channels: ruclips.net/video/FWp3KM33NQM/видео.html
how to install yamaha voice sounds as midi out on cubase
Hey please watch this and give me a feedback which scenario you are up to:
ruclips.net/video/zjyxgW46c44/видео.html
Please can I know the dj app that you use ? I mean the app on the laptop you used
He says in the title, Cubase
2 .el kullanılmış bir psr a2000 aldım , fakat , cubase de ne gibi adımları izlemem gerekiyor ,henüz onlar birbiri ile tanışmadılar 😅
Thank you so so much👌🤝
Hi mate just wondering if you could help with connecting my Roland r70 drum machine to my Yamaha Psr970 via midi.
That is good question. Both devices you mentioned supports MIDI . According to photos I found on internet R70 has 5-din MIDI sockets. So you need cable like in this video:
ruclips.net/video/tnyYANwzuUA/видео.html
Yamaha PSR 670 has only type B USB Midi, but PSR-S970 fortunately has both options (5-DIN plus USB Midi)
I assume that you want to have the following setup:
Next you need to configure channels on Functions / MIDI / RX (receiving) because Yamaha will be "listening" and drums machine will be sending MIDI data.
Please give me more details am I right about your setup and than we wil try to do more.
Have you tried to connect to android device? I have tried but couldn't get the phone to recognise it as midi input
Yes I have tried and it works. Which app would like to use ?
I can make a video for you.
@@BBWalkerTV great! I am using bandlab.
@@BBWalkerTV hi, any update?
@@ajaybangi Sorry there was a lot of other stuff. I need to check this BandLab ASAP
hello, i have yamaaha electone el 100 and it have a midi cable too. but i couldnt find in the cubase
Maybe you need to install USB Driver first ?
Great video. Thank you
I am using Cakewalk by Bandlab. The DAW program recognizes my PSR S670 but there is no sound and the keyboard does not play in the program. Can you help me solve this problem?
I will try to help you I only need to find a demo version
@@BBWalkerTV Hi, thank you, I await your reply. In Cakewalk If I select the digital player for input devices, the keyboard does not play in the program, however, if I select the digital keyboard in the output devices the sounds play through the speakers of my psr s670.
Cakewalk is by Bandlab and is a free DAW program
@@alextenerife1008 I will look forward to it. Maybe in settings there will be something called play local notes or send them thru MIDI
Hello mr walker are you still available to ask questions about psr670
Sure. I still have PSR670, Let me know what do you need.
On the psr 670 could you do a video for me explaining what all the mixing console does, for me
@@davedugdale1625OK I will do it ASAP
This is a requested video for you ruclips.net/video/NsEfrKCpjXI/видео.html
Hi I really like your videos. I am a beginner with this stuff trying to use my Yamaha PSR SX 600 to connect to Cubase elements AI 12. When I connect my keyboard I see Digital keyboard Port 1 - but when I play I don't see the signals . what could I be doing wrong
BTW I use a MacBook air
Hey please check this video it is for s975 but in SX600 idea is the same (2 ports explained) ruclips.net/video/FWp3KM33NQM/видео.html
Can i record audio of my own yamaha piano sound directly into my laptop using usb cable?
When i record midi i get a signal. But when i want to record audio i don't get any signals. Any ideas?
No. Becasue Yamaha PSR do not provide audio interface inside. You need external audio interface and grab analog output 1/4 jacks or use usb audio Player and grab wav inside Yamaha. Soon there will video about it. Regards
Hi thank you for the video, how is the latency? Do you think it also will work with Cakewalk, and Pro Tools? Thanks for your time
Yes it should work. Aiso is a standard
Can you do the same thing on studio one
Will this work if i have yamaha dgx 650 and studio one?
Great Video - RetiredTech Guy- finally have time to study music theory; learn piano ; Brought a P45 B Yamaha in Nov - I'ml new at this -Will also get into backplay software - music composition comes later- goal now is it play back piano songs ( like the demos on my P45 B )I can download .Does Cubase LE allow me to import "canned " piano arrangements ( classical , etc) and then play back to the P45B . If so what steps are involve with Cubase LE and if so I'll obtain the software - or is there a easy way to import and then upload to the P45B
What is the name of the midi software?
Hello!
Can you tell me if there's anyway to use the same keyboard to record VST sounds (e.g - kontakt, omnisphere, etc.) through my laptop/PC?
This will be scenario where keyboard works as a midi controller, there you will find some inspiration: ruclips.net/video/AoAdHlhuEgg/видео.html
If you want to record it as WAV you need to grab audio stream from audio interface in DAW.
for more scenarios look here: ruclips.net/video/zjyxgW46c44/видео.html
what cable do i need to connect my yamaha keyboard to my computer? a 6.35 mm to 3.5mm one?
Yes. If you plan to use analog out and Line in PC. However better solution is to use usb audio interface. Line in in PC is usually low quality
The other solution is to use USB Audio Player. Please chcek this new stuff: ruclips.net/video/yMBIUarEC_c/видео.html
What is sound editor that you use in this video?
Steinberg Cubase 10.5 LE
Sir how did the shaftwar
Should we use an audio interface ? Is there any latency issues without an audio interface ?
No, you don't need audio interface just pług in the USB midi cable into computer.
If you notice latency problems please check this video ruclips.net/video/FYcW7gcN8cc/видео.html
Hey i have a question. Can you record audio with an 6,5mm cabel connected to an audio interface?
Yes of course.
In order to avoid the double voice AKA phaser effect you need to turn off your midi local off. I use Yamaha MODX6 with my Cubase and Logic pro X I had the same problem so that is what I did.
how to turn MIDI local off? from the keyboard? im using a Yamaha PSR E303
Can this be done with the "Cakewalk" DAW?
i will try to find demo version and make a video about it. Regards.
@@BBWalkerTV It's a free DAW
Sir how to turn off the keyboard sound and how to only get the DAW sound on keyboard? I am hearing 2 sounds
@@yashpopat5084 Reduce master volume on Yamaha to zero - exactly like I show in this video: ruclips.net/video/7hI9B8sUxGQ/видео.html
Hi sir, how can I record the original sounds of my digital piano on cubase? because I dont like the sounds of the midi track. I hope you reply, thank you!
U have to buy any audio interface (like Focusrite Scarlett), plug it to USB in Your comupter, then the AUDIO Output of your keyboard plud to input in this interface. Then in Your DAW create AUDIO track (not MIDI), and as input, set your interface (e.g Focusrite).
@@ajgor64 Thank you very much! Is there any way I can record my original digital piano sounds without using an audio interface? a budget way to be precise.
Great videos. I am 74 years old so it takes me longer to digest a tutorial. I have a question. I use a PSR 770, and I have a midi song in my PC's DAW. I was able to separate each sound on different channels corresponding to the equivalent channels in my Yamaha's style creator. I also have separated the sections of the midi tracks I could use for the basic introduction and the basic ending. All this is stored in different midi files with different names. Now, can I use all these midi files by transferring them to the PSR style creator via the same USB cable or through a stick? I have tried to play the files on the PC and try to play the same in the style creator but it is not good. Thanks.
Hello. Thanks for your feedback. Please check this video it's quite long but it should clarify all the stuff you asked for:
ruclips.net/video/FWp3KM33NQM/видео.html
Hi sir good morning. Can you please explain about this Qbase software and the required accessories for this. I want to record some songs with vocals. I have Yamaha psr S970.
PSR 970 has pretty same principals like S 670 - it depends if you need to assembly your project on PC and than record vocal or making complete performance with vocal on arranger. In both cases it is good to have separated track for vocal .
A few days ago I purchased PSR S975 so soon there will be video about it.
Sir digital keyboard is not shown??please..
Please tell me what operating system are you using basically there is no need to install driver on Windows 10 and I have tested in on this particular OS. It should be automatically detected by the system without any additional drivers however in your case maybe you need to install something like a midi driver
I use Steinberg ur22mk to record but when i record i have to crank up volume to hear it on the PC ,But when i listen to a video from RUclips it sound normal What am i doing wrong Thanks
Probably need to be normalized in the software please stay tuned I will be making the series of video about mixing basics
@@BBWalkerTV how do you that ?
Here is the video where I am showing it: ruclips.net/video/yMBIUarEC_c/видео.html
Hello sir thanks for the tutorial.i play yamaha keyboard too. I live in a small island mauritius.i would like if you can share the daw cubase with me.thanks
Try using flstudio
my yamaha doesnt have that port
Hey ,your work is so useful and helpful, appreciate it man. Just one quick question. I plugged my psr s670 into ableton. I use the midi sounds in ableton, so is there way to switich off the keyboards sound or do i just have to turn the volume down?
Yes the simplest Way volume to zero
You need to go to the settings menu on your yamaha. There is option to turn of the sound on keyboard
Itd be go to midi menu in your actual keyboard and turn off local sound. Same for e drums keyboard and all
Which app want to use to connect the keyboard to pc?
If your device is found as Generic midi controller you don't any special app - just DAW software you like: Cubase, FL Studio, Pro Logic, etc Anvil studio is free
@@BBWalkerTV thank u
hello and thanks for all the videos my name is David. please just want to ask if it possible of using WAVELAB LE 9.5 Audio Editing and Mastering software which don t have drums groove. can i use psr 670 yamaha with Laptot connections and create a drum groove with the Wavelab. Secondly can i have a private lessons with you
Hello David nice to meet you. Thanks for your comment. About your first question: I need to check this software and than I could give you some info - because I haven't used it. About the second questions: at this moment I am too busy (sorry) for lesson but it may change in the future. Please stay tuned with the channel. If something changes - there will be update here.
@@BBWalkerTV ok thanks for the answer, just waiting for the Wavelab answer ,,thanks once-again
what is the name of the wire?
Printer usb cable or male type B to małe type A USB
Is it possible to convert wave format to style file or ppf and if we play wave file in the keyboard then how to change the tempo.
Salute.... and regards
Honestly I have never been making styles using my own wave files into Yamaha but I will look into this topic and as soon as I get some knowledge I will post a video. The thing that I have done is to use my own files to create media-pad bank please check this video: I may be useful: ruclips.net/video/O-QA77qiETU/видео.html
Yamaha Chord Tracker can help you build-up a base for your arrangement , here is the video showing the concept:
ruclips.net/video/00tFTUkGSkY/видео.html
This still runs like a midi?
Yes, In this scenario everything in 100% MIDI data. Regards
@@BBWalkerTV thank you!
Sir whats the process for ableton live?
If I get the demo of ableton I will make a video about it
Any latency issue
No, if you use ASIO just like shown in this video for FL Studio:
ruclips.net/video/FYcW7gcN8cc/видео.html
What is that software
Steinberg Cubase 10.5 LE, but you can do same stuff on FL Studio , Ableton Live as well or Logic Pro
Hello, what software did you use? name of the software please, thanks
Cubase 10.5 Le
@@BBWalkerTV THANK YOU
thank you
U are welcome.
App name??
is cubase 10.5 free? or how much?
My license was very cheap electronic version about 20 US dollars
Can you please show the same thing on fl studio please
Sure, Please enable notifications - next video is reserved for other topic, but maybe in 2 weeks I will show this stuff in FL Studio
Here is video especially for you: ruclips.net/video/7hI9B8sUxGQ/видео.html Regards
Thank you so much
@@Carmy2 U Welcome
What is the apk
You can find it on Google Play. I dont have apk file
Putting the lid on an Instant pot
Sir... How can I connect My Psr s670 with Audacity Software...
Please reply me...
Your help is Much recommended...
Yes but only to recording audio stream (WAV) . I need a convert from Jack 1/4 inch (6.35mm) to Mini Jack (3.5 mm) Audacity does not support MIDI. I will make separate video about free MIDI software that you can use because there are some free alternatives. Please stay tuned. Regards.
@@BBWalkerTV thank you so much for your valuable reply....
Why i don't have the digital keyboard and i did everything you said😭
What model of keyboard you have. If you disconnect and connect usb cable can you hear the Windows jingle sound after new device is Discovered?
Dude sounds like the Mandarin from Iron Man
Yeah. Who knows 😀
Peki ya a2000 bağlantısı
I for the life of me cannot get the MIDI keyboard to play notes on the instruments.
I don't have this problem in my other DAWs and I can't figure out what is wrong.
EDIT: I didn't hit record............well then....😑
Thanks for sharing. Maybe it will help some else 😁
Is Cubase a paid DAW?
unfortunately Yes, but sometimes you can find a good promotion and get the good price
who needs facecam when you got reflection
Magic :)
100th comment
the autofocus was kinda dancing.
Yeah, now I have software for screen recording so it should be better in new videos. Regards
@@BBWalkerTV im keep getting error with installing yamaha drivers, it keeps saying device not connected but it is... the error code is 25001 i think
Aaaaaar😮
Good video but you talk too much
Thanks for the feedback. I am sorry but like talking a lot !
Good but wasting time...
Why you think so? This is an alternative to DAW sound engine.
Зачем так разговариваешь не приятно?
Please stop drinking and recording videos. 90% of the video is a waste of, hem? ahhh, well, ahhh,... etc...
OK, but I assure you I never record after drink :)
not helpful
Why, please describe you problem, maybe we can solve it together
why is he talking so strange? very annoying
I have no idea. He is probably weird. 😀
werid English!
At least it is English. 😁Regards
My Cubase 10 pro working fine. I upadared to 10.5 but midi input not detect by instruments. PSR device is detected as input, but when I press key in keyboard it does not give signals to DAW instrumnets. Is there any problem with Cubase 10.5? Please help.......