7.3 powerstroke engine rebuild ( reassembly)

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024
  • Removing cam gear and installation on new cam, piston cooling nozzles, crank and cam install.

Комментарии • 150

  • @usmcmustang2972
    @usmcmustang2972 Год назад +11

    This video is coming in very handy too me right now ... Doing a rebuild on my 2000 f350 that made it through 333k really hard construction and heavy tow miles ... Put a used reman 7.3 with 40k miles on it for a temp engine.. and might run it a couple more years .. but going to put the original back into top shape and have it ready ... I love these engines when they work right... 👍

  • @smoothiebunz7637
    @smoothiebunz7637 4 года назад +11

    Thank you so much another 7.3 back on the road couldn't do it without you're help

  • @Ed-ty1kr
    @Ed-ty1kr 4 года назад +3

    You know what's funny.... I smell the oil, assembly lube, diesel fuel, and a hint of PB Blaster, watching these videos. Yet I am sitting across the house, far from the garage, and have no grease on my clothes whatsoever. Havent done any mechanickin all day. Ain't that sumething. LOL...

  • @petelyczek5728
    @petelyczek5728 4 года назад +7

    If one of my kids ever gets to rebuild an engine, I will have them watch this video as a training tool. Your commentary is right on and comming from you it will be better than if I did it. Kids don't take my word as they should in my opinion. Having third party source of information builds a level of trust that I can not instill in what I say. Sometimes I get to the point that I won't even try to get them to do anything like this. It's easier if I do it myself without asking them. They are in their twenties now. I figure, by the time they turn 30, they will get to do this kind of work and I be sitting by watching them struggle. Like Mark Twain once said: when he was 18 years old, he thought his father was an idiot. By the time he reached 25, he thought his father was smartest man be ever met.

  • @robertknudson7424
    @robertknudson7424 6 лет назад +26

    These are the best type of videos two thums up.

  • @AlexDKennedy
    @AlexDKennedy 5 лет назад +2

    Jeez...those "Clicks" at the 33 minute mark are so satisfying.

  • @mannyfresh8612
    @mannyfresh8612 8 месяцев назад +1

    With this detail video you gave me the confidence to do it myself Excellent Video Thanks Bro !!!!!

  • @richardhoneywell7411
    @richardhoneywell7411 2 года назад +1

    Great video Warren doing some catching up on old videos.

  • @tomh6477
    @tomh6477 3 года назад +4

    Um when I get ready to put the cam shaft back in the engine block I take the block off the engine stand and set it down on wooden blocks on the back side of the engine block so I can lower the cam shaft straight down into the engine block . There's less chance of damaging a cam bearing and it's quiet a bit simpler going in.I use my over head crane to lower the cam shaft in so I don't chance it slipping out of my hands and damaging a bearing.

  • @Mikael5732
    @Mikael5732 5 лет назад +6

    ALWAYS, watch your vids. Thanks for making these!

  • @appliancerepairshorts
    @appliancerepairshorts 7 лет назад +14

    great job. love how you are such a perfectionist. thanks for sharing

  • @jonsaircond8520
    @jonsaircond8520 7 лет назад +3

    Awesome video thank for posting this!!! I got a 99 F250 with 135K miles on her and hope it's a very long time before I see this in person 😀

  • @lanceopperude5868
    @lanceopperude5868 4 года назад +4

    Absolutely love your videos....your very knowledgeable highly detailed. Explain everything in detail......keep up the great work and keep them videos going!!!! Top notch my friend.

  • @blenheimfire
    @blenheimfire 4 года назад +3

    Awesome! Love the channel. Two thumbs up for you.

  • @AChrivia
    @AChrivia 7 лет назад +6

    You definitely need a go pro camera that you can wear or easily mount so you have both hands free to be able to work.

  • @trolling4dollars816
    @trolling4dollars816 5 лет назад +2

    I trust your years of experience. but I was taught in shop class to use short 6 point sockets whenever possible. Also, when using a torque wrench, you cannot have anything touching the socket or any part of the torque wrench in front of the "click" point. Crescent wrenches are for home owners and hacks.

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  5 лет назад +26

      And all those guys teaching you this in shop class are there because they weren't worth a fuck in the real world.

  • @cheekcj
    @cheekcj 7 лет назад +2

    Great breakdown on this. It's nice and slow and easy to follow. Thanks. BTW you could have a second career singing 🎤 for a Primus cover band.

  • @jakefuller79
    @jakefuller79 5 лет назад +4

    Ahh I feel like I've landed in good hands.....thank you for these videos! And err.... is it just me or does it seem all tools are about a buck or a buck fifty these days! 🤣

  • @davidhenri2722
    @davidhenri2722 Год назад

    Generally speaking I agree about welding the gear but you can weld them, Ford Taurus SHO engines had issues with the cam gear spinning (not keyed) on the cam and the repair was to weld the gear.

  • @edhog
    @edhog 7 лет назад +1

    Excellent video mate. Well done.

  • @cesarconh895
    @cesarconh895 4 года назад +2

    I can guarantee you that the machine shop did not lube the cam when they install it. They probably lined up the holes but because they didn't lube it or just the used motor oil to lube it, the oil ran out and the cam grabbed the bearings and spun them

  • @Nostradamus_Order33
    @Nostradamus_Order33 6 лет назад +2

    Excellent job on the video

  • @ottowarner9965
    @ottowarner9965 4 года назад +1

    Awsome job This is an awesome video I am also wondering which service manual you use

  • @danielgaskill306
    @danielgaskill306 7 лет назад +6

    Hey love these powerstroke videos, very helpful. I'm curious where you got your digital copy of the service manual from? Thanks for the help!

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +4

      Daniel Gaskill I bought them from my dealer, they are about 300 bucks per disc.

    • @danielgaskill306
      @danielgaskill306 7 лет назад +2

      grease monkey101 I was hoping you were going to say eBay haha. I have the paper shop manuals and saw the digital versions on eBay

  • @ormandhunter3546
    @ormandhunter3546 5 лет назад +1

    Great job, friend!

  • @kennethrainwater1611
    @kennethrainwater1611 5 лет назад

    Just a bit of useless information. The notches in the cam bushings are for alignment. Manufacturers bushing installers have a dimple that the notch goes over. The sleeve extends through the bushing and has a groove in it. You drop a pin through the oil galley that falls into the groove. Start the bushing in the bore and remove the pin. When the bushing is installed to the correct depth by bottoming the tool the hole will be lined up. Fool proof oil hole alignment. Maybe machine shop should be using this setup. Thanks for a great video.

  • @MrDevilscreek
    @MrDevilscreek 3 года назад +1

    Great video, can you please tell me what online workshop manual are you using

  • @vtwinbuilder3129
    @vtwinbuilder3129 4 года назад +1

    To each his own and I’ve definitely used it before, it really used to be the industry standard, beside STP oil treatment but I’ve always believed using libriplate or any grease to pre-lube bearings is just introducing sludge into a brand new engine. Perhaps it melts and blends with the engine oil better than I’ve been led to believe but I always use an oil based assembly lube like Torqo, Lucas or Permatex. I also think you run the risk of plugging off oil holes with globs of grease and possibly risk damaging brand new components at a critical time.
    Just my 2 cents worth, been building engines of different kinds almost 20 years now and knock on wood I’ve had good luck. I’m curious what your thoughts are Warren? What do you think about my “methods” so to speak?

  • @robertwinton2649
    @robertwinton2649 2 года назад

    Standing by awaiting video

  • @kathleennawalt9855
    @kathleennawalt9855 7 лет назад +1

    Dear Mr. Grease, maybe one could
    devise a "pusher" device that would
    bolt to the block and "push" the cam
    bearings in instead of hammering.
    Such as the opposite of the gear
    removable tool. Host a thought ?
    Sincerely, Kathleen.

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +1

      Kathleen NAWALT Well great minds think alike, earlier this year I was driving some cam bushings in a N-14 Cummins that were tight and I was thinking it would be alot easier to press these in.

    • @kathleennawalt9855
      @kathleennawalt9855 7 лет назад

      +grease monkey101 Say there . . .
      Mr. Grease, My Guy says thanks for
      the complement. He says "next time"
      I'll make that tool. Just next time
      there just isn't enough time. Sure
      would be nice to have though.
      Sincerely, Kathleen & Me.

  • @CUSTOMWORKS7.3PSD
    @CUSTOMWORKS7.3PSD 3 года назад

    Don't you need to clearance those main bearings ??????????

  • @CUSTOMWORKS7.3PSD
    @CUSTOMWORKS7.3PSD 4 года назад

    You dont need to clearance the bearings ???????

  • @royhernandez4783
    @royhernandez4783 7 лет назад +2

    I'd love to know of someone in my area that would take the time to do nice work like you did in the video. You hear the bad experiences people go through and makes it difficult to trust someone to work on your truck. You wouldn't happen to be in Texas would you??

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +6

      Roy Hernandez No Roy, I am originally from Texas, but I live in southern Oregon.Thanks for the compliment and for watching.

  • @handmethatchingadera
    @handmethatchingadera 5 лет назад +1

    Are the main bolts reusable like the older 7.3’s? I’m fixing to do a rebuild on one of these myself and I’m curious if I can use the same main bolts.

  • @softdet2118
    @softdet2118 6 лет назад +1

    I haven't started my 7.3 rebuild yet (cause the machine shop has had it for the past going on three months) Im just curious about the torque wrench and how to get the right one without spending to much. Thanks in advance.

  • @brevinbeckler9101
    @brevinbeckler9101 7 лет назад +2

    What did the machine work cost?

  • @JJ-jv1gu
    @JJ-jv1gu 5 лет назад

    KT4603E brought me here
    I’m new to the channel
    I’ve been binge watching the last two days

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  5 лет назад

      Thanks to you and to him.

    • @JJ-jv1gu
      @JJ-jv1gu 5 лет назад

      western truck and tractor repair
      The confidence in the execution of the repairs is impressive.
      This guy DeBoss thinks he’s special. You BLOW him out of the water. Mayb u can use some production ideas from him. Here is a link
      ruclips.net/video/VFFwOfN1anI/видео.html

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  5 лет назад

      Thank you

  • @andybradley9882
    @andybradley9882 3 года назад +1

    Love your videos, very educational! I have a 99 7.3 powerstroke I want to rebuild. The motor was ran hot? What are some things I should check to see if motor is worth Rebuilding? TIA

    • @seer1388
      @seer1388 2 года назад

      If it isn’t locked up it’s worth rebuilding, also if it isn’t locked up it probably doesn’t even need a rebuild, these engines can take a lot of abuse, even an overheating cycle.

  • @3408kid
    @3408kid 7 лет назад

    good job i definately enjoyed the video i had a 99 powerstroke and i loved that thing i think they get a bad rap i would love to have one again i had very good luck with it and it was very reliable for me

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +5

      +3408kid Thanks, Yeah there are alot of these things still going down the road, mainly because most guys don't want one with all the emissions crap on them.

    • @thecomanchekid
      @thecomanchekid 7 лет назад

      i have a 90 idi and a 2002 powerstroke, both are great and reliable. and i dont have to worry about emssions and def

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +3

      +Sideshow Bob Yeah, I would just keep running them too, I work on alot of new equipment and vehicles and there is way too much electronics and emissions crap on them.

  • @jamesbrock9902
    @jamesbrock9902 6 лет назад +1

    where do you get your computer program that has the manufacture instuctions? im having a hell of a time finding one.

  • @tylerdunn6578
    @tylerdunn6578 4 года назад

    Thank man enjoyed the video.

  • @chaseyangtze4689
    @chaseyangtze4689 Год назад

    When I built my I always use piece metal stick it's down the hole never missed it every time right on spot...

  • @FredFlintstone21
    @FredFlintstone21 6 лет назад +1

    Did you plastigage rod and main bearings thanks

  • @owendempsey8362
    @owendempsey8362 6 лет назад

    Awesome video thanks

  • @Mikael5732
    @Mikael5732 5 лет назад

    I'm heading out your way. Need to go over my 7.3 idi na.

  • @Gabriel-jr2jr
    @Gabriel-jr2jr Год назад

    Not the best quality not the best angles but definitely works

  • @seankilleen6340
    @seankilleen6340 5 лет назад +1

    Awesome videos! But one thing I do wanna ask you where do you get / order your coveralls from ?

  • @johnmiller4369
    @johnmiller4369 6 лет назад

    So during my rebuild, I took off the low pressure oil pump, and took off the inner and outer gerotors, took motor apart and laid the crank on my bench. Crank did not fall or get hit. Going back together when it was time to put pump back in I ordered the Melling pump. Received new pump and soaked in oil. Went to install and the inner gerotor will not slip on, just for fun tried to install old inner gerotor and it also won’t slip on. When I initially took off the old gerotor it would slip on and off easily. Is it safe to “tap” the new inner gerotor on, or should it slip on and off easily. If it should slip on and off easily then what happened from the time I took off the old lpop and tried to install the new one? Lost on this one...help please!!

  • @stevecrosby9673
    @stevecrosby9673 2 года назад

    I’m building one now and the new mahle lifters have one oil hole on one side , which way should the hole be facing ? Oil to piston or oil to intake valley? Thanks

  • @calvinhill1564
    @calvinhill1564 Год назад

    have you completed the rebuild of the 7.3

  • @thirdmike5362
    @thirdmike5362 7 лет назад +1

    Hey bud, sorry if this is a dumb question. Do u use assembly lube on the cam bearings or bang em in dry?

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +7

      +Michael Allman No that's not a dumb question. Install them dry. You only want assembly lube on the i.d. of the bearing where the cam journals ride, but nothing on the o.d. of the bearing.

  • @pistongt101
    @pistongt101 4 года назад

    Is there a ring or gasket on the piston jets?

  • @robwilliam795
    @robwilliam795 4 года назад

    Did the cam bearings come in that overhaul kit?

  • @haydendenard7291
    @haydendenard7291 6 лет назад

    Dont ever put the piston cooler nozzles in befor the pistons i have seen tons of engine damage caused by that people hit the nozzles with the big end of the rod when they install the pistons its worth the extra 10 minutes to fight with the nozzles after the pistons are in its just one of those things you may get away with 100 times but it only takes 1

  • @CentralCoastCars
    @CentralCoastCars 5 лет назад

    thank you

  • @pvcarmon1
    @pvcarmon1 6 лет назад

    Great video. Wonder if he used a $$$$$ International Harvester Navistar $$$$$ bering kit or a cheap Chinese $50 one from ebay??????? Great video though!

  • @aaronmendez5461
    @aaronmendez5461 2 года назад

    No need to check bearing clearance?

  • @jeansonnea
    @jeansonnea 7 месяцев назад

    I got a question for you. I have a 94 F350 that has a 7.3l I am taking out. What size bolt did you use to attach it to your engine stand. I keep finding it is 7/16-14x4. I never had a ford so it will be a new task ahead for this project.

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 месяцев назад

      I used the bell housing bolts

    • @jeansonnea
      @jeansonnea 7 месяцев назад

      @@westerntruckandtractorrepa1353 are they long enough? I am putting it on 2000# Pittsburgh engine mount?

  • @IVALeMoNz
    @IVALeMoNz 6 лет назад

    what torque wrench are you using?

  • @PatrickBaptist
    @PatrickBaptist 6 лет назад +1

    Man you don't want to use that oven for food use after letting that oil roast in there......

  • @thirdmike5362
    @thirdmike5362 7 лет назад

    Thanks. What does a job like this cost out the door? U do really nice work.

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад +2

      Michael Allman Parts and labor on this one was almost 11,000, that was machine shop work too. We put some performance stuff in which cost a bit more.

  • @nb117
    @nb117 7 лет назад +2

    Where is that online service manual you were looking at? Do you know of a good paper one or do you prefer online?

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад

      +John Bias Those are CD ROM discs I bought from Ford. You can download them from a website called EPC.CATALOGS alot cheaper.

    • @nb117
      @nb117 7 лет назад +1

      Thanks A lot !!

  • @matthewkeeney5962
    @matthewkeeney5962 2 года назад

    What model is the Deere? 5020? 6030?

  • @horaciomorales5722
    @horaciomorales5722 4 года назад

    How much do you charge to overhaul a 7.3

  • @scottc4108
    @scottc4108 4 года назад

    Can you recommend a good service manual for my 01 f250 7.3

  • @kenuber4766
    @kenuber4766 5 лет назад

    What is that in the back ground? 850 John Deere! "Popping Johnny"!!

  • @CarlosHernandez-ej7hh
    @CarlosHernandez-ej7hh 6 лет назад

    What's a fair price to charge to do that full job of rebuilding it and installing the engine all the way to start it. Please let me know as soon as you have a chance. I would really appreciate it 👍. A family member of mine brought me all the stuff new I think his diesel mechanic moved it or something. Lol

  • @haralaboslukatos6734
    @haralaboslukatos6734 6 лет назад +1

    How much do you charge for 7.3 idi turbo 1993. Take out the engine do overhaul and put the engine back?

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  6 лет назад +2

      Haralabos Lukatos You probably just got a bad Injection pump, those old 7.3 engines ran forever. Unplug your glow plug controller and squirt either in the intake, if it starts on either then there is a fuel problem.

    • @haralaboslukatos6734
      @haralaboslukatos6734 6 лет назад

      I am not mechanic but that i am thinking too fuel problem. For you know some thinks about my truck. I buy that truck used. I know is needed glow plugs. Is was little harder to start in colder days. warmer days started ok. i used to drive but one day after work i start the engine idle ok. But when i press the gas pedal cut the engine off. Is stick shift i take home but i have to restart 20 times. One mechanic tell me two pistons is bad i not know how check that and if is truth. the same mechanic when i buy the truck is have fix fuel leak. And because have missing the air hose the original is install one square hose. Now other mechanic tell me that hose probably damage the pistons because the engine not pull the air need. other i know the people i buy the truck used starting fluid

    • @remingtonmitchell8117
      @remingtonmitchell8117 6 лет назад

      Haralabos Lukatos your motor is f... if starting fluid was used on it a lot . The original owners of my 6.9 did the same thing . Everyone of my pistons are done for. Burning a lot of oil . Do not use starting fluid it is the worst thing you could do to them. If the motor doesn't spin fast enough when you go to start it it will ignite early. Use gas on a rag in front of the filter . I have been told that is one of the better ways to start the truck.

  • @marclarin8321
    @marclarin8321 4 года назад

    I wish I could be your neighbor lol

  • @frankvacanti5277
    @frankvacanti5277 3 года назад

    Sad these trucks are basically obsolete. Looks like electric is going to win out. Supposedly light-duty trucks won't have diesels after 25. Supposedly only Ag and transportation will have diesel.

  • @nb117
    @nb117 6 лет назад

    What are those coolant collars called that sit in the block and fit in the head? I have had my engine back together for a year and it runs fine but I swear those were not in the block when it came back from the machine shop. For the life of me I can’t remember if I put them back on or not.

    • @nb117
      @nb117 6 лет назад

      Or are these oil passages? Top left and top right looking from side of bank

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  6 лет назад

      John Bias Not sure what you're talking about.

    • @IVALeMoNz
      @IVALeMoNz 5 лет назад

      are you talking about the dowels that your put the head on? they stick out of the block maybe a 1/2 inch?

  • @yaco6046
    @yaco6046 Год назад

    where are you I need to repair a 7.3 year 2000

  • @patrickquest5233
    @patrickquest5233 6 лет назад

    Where did you get your freeze plugs kit? I am having a hell of a time getting freeze plugs everyone always sends all the wrong sizes

  • @billypappas9943
    @billypappas9943 6 лет назад +1

    Is there a ball bearing associated with the oil pump

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  6 лет назад +1

      ReactedGoose Gaming No , just internal and external gear and pump housing.

    • @billypappas9943
      @billypappas9943 6 лет назад +1

      western truck and tractor repair ok cause i had the pump on the bench and a ball bearing fell on the floor and i wasnt sure if it was already on the bench or part of the oil pump

    • @billypappas9943
      @billypappas9943 6 лет назад +1

      western truck and tractor repair does the pump need to be primed and if so how

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  6 лет назад

      ReactedGoose Gaming No , just get your gears wet with clean engine oil and then install, they are self priming.

    • @billypappas9943
      @billypappas9943 6 лет назад

      western truck and tractor repair if i turn the engine over by hand will it pump oil and create oil pressure so i can see if i have any oil leaks before i put the engine back in

  • @calincabac612
    @calincabac612 3 года назад

    Put the came berings in freezer before installing thy will go in like a glove you will way less your hammer

  • @JT-qf4it
    @JT-qf4it 6 лет назад

    Why didn't the machine shop pay for that engine that got toasted when they installed the cam bearings wrong?

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  6 лет назад +4

      +Joel Watkins Because they knew I was just starting out on my own and didn't have the money to fight them.

    • @FredFlintstone21
      @FredFlintstone21 6 лет назад +1

      I bet you didn't go back to that machine shop again!

  • @willsmithey6458
    @willsmithey6458 7 лет назад

    would that cam gear puller work on a n-14 cam gear

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад

      +Will Smithey No, I tried that a year ago., It took heat and 50 ton press to get it off.

    • @willsmithey6458
      @willsmithey6458 7 лет назад

      I did one last week ended up have to buy a new gear put to much heat on it thanks a lot though

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  7 лет назад

      +Will Smithey Yeah, don't feel bad, I have broke them in half on the press, it happens.

  • @nick88819
    @nick88819 2 года назад

    John deere 5020 in the backround?

  • @dallyup34
    @dallyup34 6 лет назад

    What’s the part number for cam bearing installer?

  • @R.E.HILL_
    @R.E.HILL_ 4 года назад

    @30:53 that's not in any service manual... YAIKS!

  • @cortlandtreeservice4619
    @cortlandtreeservice4619 7 лет назад

    who did you get the rebuild kit through

  • @patrickcuillier4763
    @patrickcuillier4763 7 лет назад +1

    Where did you buy the gasket set from?

  • @horaciomorales5722
    @horaciomorales5722 4 года назад

    I will ship it to you pls let me know I need my truck

  • @BIGCOUNCH777USA
    @BIGCOUNCH777USA 5 лет назад

    I would have home rebuild my dam engine

    • @westerntruckandtractorrepa1353
      @westerntruckandtractorrepa1353  5 лет назад

      What?

    • @dh-_1011
      @dh-_1011 4 года назад

      I believe he meant to say, “I would have homie rebuild my damn engine.” I know it’s an old comment but I was just rewatching the old 7.3 and 6.0 videos.