I've found god, I didn't know he loved BMWs so much... thank you ! Install directions, inpa in English, AND the download for ista? You deserve a trophy.
I've spent a happy hour watching, downloading and installing. What a fabulous service you have done for all of us with old BMs (an E38 and an E90 here). Really, really very much appreciated!
At the 15:20 mark, don't forget the daten files come down as ZIP files (compressed); they will need to be extracted to your desired folder before you click on "Select SP Source."
Your tutorial is fantastic. Thanks very much for taking the time to post it. I followed your instructions. Set it all up on my laptop, plugged it in using the enet cable to my 2018 530e and voila! Diagnostics, programming, error codes .... everything a DIYer could ever want. The enet cable was like $25, a new 2TB hard drive was $100. Identified a faulty park distance sensor. Found a BMW new sensor online for $35. Total cost to me $160 vs probably $750 if I went to the dealer. Kudos & thanks again
Ur badass I've had the inpa disk for over 2 yrs but gave up on installing it cause it's so complicated. Ur vidstep by step is great for us audio/visual learner.
This is an excellent resource and guide to all the essential BMW software. If you follow the instructions and guide from this video, the install will go perfectly.
For RUclipsrs Hi there, i am all the way from Recife in Brazil, South America, really liked your video, very informative and all, thank you for sharing it…
Please indeed make a vid about WinKFP and about how to add and remove complete modules to the car, not just modify module status/contents. appreciate your work ! Thanks for the vid !
This was an amazing Installation Guide...If this was rated out of 10... you would 10/10. I am also looking install ISTA+ maybe you should do a guide on that as well...lol Great job...!!!
First off I want to say thank you for the love that you’ve given to all the BMW owners who have watched this video! Next up is I’m stuck on the OCX file, for some reason it won’t load properly in my command prompt? Can you help me out?
Still getting a error message 😩, says the module mscomctl.ocx failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary dependent . DLL files.
Hi VRR: Great guide, clear and concise !!! However, the link to your website doesn't work. Do you have a new website, or another link for the download? Thanks so much!
This video is a god send still thank you for explaining this to me. I am able ot wrench on my bimmer but installing the soft ware was way over my head without help thank you
thanks so much it works . it dosent work on parralles. i had to buy a windows laptop off amazon for 350 and worked like a charm . ista didnt work on the mac.
Will this also work for the 2015 X6 M F86? I have a hard time finding something to calibrate my new fuel injector...no one is talking about F86 and I'm kinda lost here...
Thnx mate, this is a super explanation 👍 👏 very happy. Do you have some updates for my bmw e60 545i from 2003? How can I contact you? Greetings from Holland 🇳🇱 collin stewart.
This worked great the first time. I had to get a new computer and now can’t get the coding tool to accept the Daten files. Keeps saying they are not valid daten files. Stumped
Great video sir could you make a video how to do the install of ista+ and istap for the one In the link, also how to configure the icom that would help out alot of people too!
Thanks for the video it is the best one out there for sure, the torrent link for Ista 4.28.12 has no seeders, by chance is there another magnet link to another torrent file anywhere you know of? I should have waited a little longer now there is 6 seeders..................one question can I use the same software with a F15 X5 BMW using the ENET Cable sorry I am new to this
Thanks a lot for this video. Inpa was able to diagnose my ews manipulation error, but was not able to fix it. If I download ista, will ista be able to fix it
Just curious how to get e84 which is a 2015 x1. I swapped the transfercase controller/actuator and I believe it needs to be programed but I do not see the E84. Also thank you so much for this!
Hello, great tutorial. It is safe to update dme software? I have bad remap on my car(e46 330d 150kW) and i need to get stock 150kW software. Thanks for answer.
I just subscribed your channel. Wow very details. I wonder if this program will work with BMW F10 5 series. I got problem with the central gateway module. Ordered a used one from ebay and not sure if it will be just plug and play since the module was from a different car with a different VIN number.
Hello thanks for the content. I’m having issues reading my car on ista, it’s not communicating and I’m getting a pad error after trying to communicate. Any help would be appreciated thanks.
Very best video on software setup for BMW coding and diagnostics. Does it work for E64 as I have not seen any folder for it ( neither at time 7:02 nor 16:22)? Would you have a cable model/cable company that supports you/you prefer? thanks again
This helped well but was going to ask how can I reset a short circuit on the headlight unit? I bought a used one in good condition and put new Ballest and module and bulb but it works but the xenon main ds1 flickers in a sec and shuts off... I have a display warning on my dash board...... my left passenger works fine so I thought it was the modules and ballest I bought I switched then and they work fine on my passenger one think it can be a short circuit that needs to be coded to my vin? And volt output
good stuff! not sure if I missed you mentioning that the ISTA download is for windows 10 and up? read the read me file and saw the requirements. tried to launch it anyway and it said {error: not compatible (para phrased)}. any info on windows 7 compatible software? thx
Seems like a dumb question but can I use this downloadable ZIP file and the ISTA install to adjust/reset my electronic wastegate actuator on n55 335i 2015?
I've been trying to configure ISTA but I'm having a hard time, can you please make a video covering how to get ISTA started. I've downloaded the 92GB file on an external hard drive and ran the installer not sure what to do after that but it's not allowing me to use a lot of options on the app
hey idk if your still active on here but if you could help me that be be awesome so my problem is when i download the datens and i go to add it to the bmw coding tool the folder doesn’t open so i can see that base and all the models
for modify 'add and do recognize them) ocx files in syswow64, try to change the permission in SYSWOOW64 repertory: for USERS (you and you need to be an administrator)
Hello there, does this SW work on Windows 10? And are there specific instructions I need to use? Also, I have the INPA sw already installed, but never used. Should I delete the previous installed SW first? Thanks
Man please could you help me i have a sos malfunction out of nowhere and i don't know what to do i have the fault codes but i dont know what to do now...
Well this is so easy I have the same program you explained it as good I have to sit there and explain half of the people how to do this correctly and they get lost I get🤣🤣🤣
Will this software work on an R50 Mini Cooper? The torrent is super slow and will take days to download. I want to see if it will work before spending days downloading it.
Does this work on mac ? I downloaded it from your website but when I open the file and try to click on the first one “mikes easy bmw tools installer” nothing opens.
I installed ISTA but it wont let me select or change any settings such as set up ediabas interface type, or run tests. How do i set this up in order to use it fully?
I've found god, I didn't know he loved BMWs so much... thank you ! Install directions, inpa in English, AND the download for ista? You deserve a trophy.
I truly appreciate that man
I've spent a happy hour watching, downloading and installing. What a fabulous service you have done for all of us with old BMs (an E38 and an E90 here). Really, really very much appreciated!
Your kindness is a blessing to many people in the DIY ! God bless you..
Man!U are gold,more people like you we need on youtube..Thanks!
Yeah for real this is extremely useful keep making videos like this!
You are the goat man, absolutely insane you provided all this. You are the hero we all needed. I have not been able to find ISTA anywhere else!
At the 15:20 mark, don't forget the daten files come down as ZIP files (compressed); they will need to be extracted to your desired folder before you click on "Select SP Source."
This video shouldn’t have a bad review the best of the best
Your tutorial is fantastic. Thanks very much for taking the time to post it. I followed your instructions. Set it all up on my laptop, plugged it in using the enet cable to my 2018 530e and voila! Diagnostics, programming, error codes .... everything a DIYer could ever want.
The enet cable was like $25, a new 2TB hard drive was $100. Identified a faulty park distance sensor. Found a BMW new sensor online for $35. Total cost to me $160 vs probably $750 if I went to the dealer.
Kudos & thanks again
Thanks for that best one so far! Can you please do a video how to update modules to latest sp-daten also how to add VO?
DUDE! This is golden!! The best video one can locate on whole internet! Awesome and thank you for time and effort!!
For real hes a real one ngl👍🏃♂️
Ur badass I've had the inpa disk for over 2 yrs but gave up on installing it cause it's so complicated. Ur vidstep by step is great for us audio/visual learner.
This is an excellent resource and guide to all the essential BMW software.
If you follow the instructions and guide from this video, the install will go perfectly.
Please upload videos on updating modules and coding
This is the best totorial for bmw software i have ever found, thank you!
For RUclipsrs
Hi there, i am all the way from Recife in Brazil, South America, really liked your video, very informative and all, thank you for sharing it…
Please indeed make a vid about WinKFP and about how to add and remove complete modules to the car, not just modify module status/contents.
appreciate your work ! Thanks for the vid !
Solid work Sir. Next series of videos how to use them and how to get icom to connect.
This was an amazing Installation Guide...If this was rated out of 10... you would 10/10.
I am also looking install ISTA+ maybe you should do a guide on that as well...lol
Great job...!!!
Do you know what version of ISTA+ this pack have?
@@F85M 4.28.13
Thank you so much for the info! I have been trying to get these programs running for days... God Bless you sir! You have gained a new subscriber!👏🙏
Thank you for making this video and for providing all the files.
Using this info i was finally able to get a new (used) radio coded to my e90
Excellent efforts to show in detail. Thanks a lot.
First off I want to say thank you for the love that you’ve given to all the BMW owners who have watched this video!
Next up is I’m stuck on the OCX file, for some reason it won’t load properly in my command prompt?
Can you help me out?
Just keep on going to the next one, that happened in the video too @11:20 while entering commands into cmd prompt.
Still getting a error message 😩, says the module mscomctl.ocx failed to load.
Make sure the binary is stored at the specified path or debug it to check for problems with the binary dependent . DLL files.
THANKS MAN. lets hope youtube does not take down this video
Thanks dude. I really appreciate you sharing this video.
Great video, how and where do You get SP-DATEN files for an F-30?
Well done mate! Can you please make INPA guide, will be very handy
Oh hell yea dude! Extremely helpful!
Hi VRR: Great guide, clear and concise !!! However, the link to your website doesn't work. Do you have a new website, or another link for the download? Thanks so much!
Excellent! Where can I get the daten files for MINI, R56?
Hi, Great informative videos, do you know what software I need to use to Block & Disable Lost BMW Key FOB on 2016 BMW X5
Man, you are number 1. Thank you!
Does this still work
did you try it ?
This video is a god send still thank you for explaining this to me. I am able ot wrench on my bimmer but installing the soft ware was way over my head without help thank you
Really significant information. Thank you very much ❤
thanks so much it works . it dosent work on parralles. i had to buy a windows laptop off amazon for 350 and worked like a charm . ista didnt work on the mac.
Bro ! Much love for this 💯
Will this also work for the 2015 X6 M F86? I have a hard time finding something to calibrate my new fuel injector...no one is talking about F86 and I'm kinda lost here...
This is the BEST Video I have every seen, I have learned alot. Keep up the good work. When you can how to up date if any. THANK YOU
Thank you, works flawlessly... awesome, Thank you very much.
Thnx mate, this is a super explanation 👍 👏 very happy. Do you have some updates for my bmw e60 545i from 2003? How can I contact you? Greetings from Holland 🇳🇱 collin stewart.
Well done very good guide could you show installation in ista?
This worked great the first time. I had to get a new computer and now can’t get the coding tool to accept the Daten files. Keeps saying they are not valid daten files. Stumped
Fantastic tutorial love ISTA love INPA can you do more on ISTA please thank you for the video 👍
More on ista for real I NEED HELP ISTA PAD ACTIVE COMES UP WHEN TRYING TO SCAN WITH KDCAN CABLE
@@kevin83972 Same error, have you figured out?
Hi i’ve downloaded your package and installed Ista but how do i get Ista-p thanks for the great guide👍🏽
Epic! Thank you so much. That download is priceless because you don't have to screw around with that mega BS
Thanks you very much, your a real gentleman
Bless you my good Man... But I was wondering what do I need the uTorrent for? Thank you for the reply.. Antonio, Belgium
Is there a better way to get the ISTA software? uTorrent has downloaded 112MB in about 45 minutes…..
Great video sir could you make a video how to do the install of ista+ and istap for the one In the link, also how to configure the icom that would help out alot of people too!
Ur top dude to help us out mate I’m in Australia
You are an absolute legend!! Thank you very much.
hi , Qucik Question, once the SP Datens have been updated, can the folders where they been extracted be deleted to free up space? thank you.
Did you ever find out if this could be done?
Hi mate I’ve been downloading for 3 days and ISTA and so Daren is still not ready u torrent is very slow is there another way to do it cheers mate
Thanks a lot man. Great video your a god sent. Imma share this
Thanks for the video it is the best one out there for sure, the torrent link for Ista 4.28.12 has no seeders, by chance is there another magnet link to another torrent file anywhere you know of?
I should have waited a little longer now there is 6 seeders..................one question can I use the same software with a F15 X5 BMW using the ENET Cable sorry I am new to this
Thanks a lot for this video. Inpa was able to diagnose my ews manipulation error, but was not able to fix it. If I download ista, will ista be able to fix it
Just curious how to get e84 which is a 2015 x1. I swapped the transfercase controller/actuator and I believe it needs to be programed but I do not see the E84. Also thank you so much for this!
Took a quick look. Just needed confirmation. Looks like tool pack does not support E92?
Hello, great tutorial. It is safe to update dme software? I have bad remap on my car(e46 330d 150kW) and i need to get stock 150kW software. Thanks for answer.
Thanks buddy. Super helpful.
Excellent! you rock!
So Daren and ISTA still not ready after 3days
I just subscribed your channel. Wow very details. I wonder if this program will work with BMW F10 5 series. I got problem with the central gateway module. Ordered a used one from ebay and not sure if it will be just plug and play since the module was from a different car with a different VIN number.
any answer?
Hello thanks for the content. I’m having issues reading my car on ista, it’s not communicating and I’m getting a pad error after trying to communicate. Any help would be appreciated thanks.
Very best video on software setup for BMW coding and diagnostics. Does it work for E64 as I have not seen any folder for it ( neither at time 7:02 nor 16:22)? Would you have a cable model/cable company that supports you/you prefer? thanks again
This helped well but was going to ask how can I reset a short circuit on the headlight unit? I bought a used one in good condition and put new Ballest and module and bulb but it works but the xenon main ds1 flickers in a sec and shuts off... I have a display warning on my dash board...... my left passenger works fine so I thought it was the modules and ballest I bought I switched then and they work fine on my passenger one think it can be a short circuit that needs to be coded to my vin? And volt output
good stuff!
not sure if I missed you mentioning that the ISTA download is for windows 10 and up?
read the read me file and saw the requirements. tried to launch it anyway and it said {error: not compatible (para phrased)}.
any info on windows 7 compatible software?
thx
Many Thanks For Your Great Efforts , With My Best Wishes
Does this work on windows 11 or not I’m gaveling trouble putting the command prompts in
First of all thank you so much!
Quick question, does this version of ISTA work on '21 G05?
What cabel do I need using ista? Do the inpa cabel work for both or?
have ISTA installed Win 10, under Network have no ports, also no other devices, have looked and am stumped, any help?
Should look into device manager not network settings
awsome video i just need some help on the sp source i downloaded the 15gb torrent but it wont let me select it
Idk if SOL but INPA doesnt have e62- the V8 N52. I don't see the model listed...
It says the site is suspended so I can't download it
comdlg32.ocx and mscomctl.ocx do not work... I followed the guide... help would be appreciated
Hi bro. Great video. Can you show how to update software in modules
THAT would be great.................
your a god it worked
Seems like a dumb question but can I use this downloadable ZIP file and the ISTA install to adjust/reset my electronic wastegate actuator on n55 335i 2015?
I've been trying to configure ISTA but I'm having a hard time, can you please make a video covering how to get ISTA started. I've downloaded the 92GB file on an external hard drive and ran the installer not sure what to do after that but it's not allowing me to use a lot of options on the app
Did I understand you correctly the I can run ista as a stand alone program?
Hey man just stumbled on your channel today, my question is does this version of INPA work on the R56 Mini Cooper? Does your download link still work?
Nicely done. Thank you, sir
hello ,thanks for the video ,i did evrting and when i go to WinKFP update on E89 it is giving me a error
hey idk if your still active on here but if you could help me that be be awesome so my problem is when i download the datens and i go to add it to the bmw coding tool the folder doesn’t open so i can see that base and all the models
So it's actually in a zip folder, you have to extract the contents first
My ista installer gets stuck on delete tempfiles…
I’m trying to set up occ files it’s not letting me
for modify 'add and do recognize them) ocx files in syswow64, try to change the permission in SYSWOOW64 repertory: for USERS (you and you need to be an administrator)
Hi mate! ISTA is not finding any seeder anymore. What can you suggest? I need to read my fault codes in my G30
Hello there, does this SW work on Windows 10? And are there specific instructions I need to use? Also, I have the INPA sw already installed, but never used. Should I delete the previous installed SW first? Thanks
dude thanks you for this
Man please could you help me i have a sos malfunction out of nowhere and i don't know what to do i have the fault codes but i dont know what to do now...
Well this is so easy I have the same program you explained it as good I have to sit there and explain half of the people how to do this correctly and they get lost I get🤣🤣🤣
Can you reflash the footwell module with these tools ?
Yes
What's the total File size after install and everything?
i'm guessing at least 40GB right?
Will this software work on an R50 Mini Cooper? The torrent is super slow and will take days to download. I want to see if it will work before spending days downloading it.
Does this work on mac ? I downloaded it from your website but when I open the file and try to click on the first one “mikes easy bmw tools installer” nothing opens.
I installed ISTA but it wont let me select or change any settings such as set up ediabas interface type, or run tests. How do i set this up in order to use it fully?
Yes subscription to your channel done
what's a good cable for the software? 328i 2011. Cheers!
This program works on mini cooper r50 with k dcan cable?
Pls give me an answer. ☺️☺️
Hey would you have a older 3.01 inpa that could work on OBD1 cars with ADS adapter