SETTING BASS BOOST ON YOUR AMPLIFIER
HTML-код
- Опубликовано: 7 авг 2024
- ↘️Use Discount Code "JACOBVIRAL" at www.down4soundshop.com/?afmc=...
SkyHigh skyhighcaraudio.com
BigJeff bigjeffaudio.com/collections/...
Xplicit xplicitaudio.com/product-bran...
Amazon amzn.to/3KqMJh4
Amplifiers have a Bass Boost on them, so are they good to use or not? Find out here.
Make sure you are Subscribed w/ Notifications On to enjoy future videos! Thank you for your support!
My Amplifier- amzn.to/3cl912X / ebay.us/uBo99T
AGM Battery- ebay.us/5eLUn6 / amzn.to/388fMTB
Voltage Meter- amzn.to/2OfxPQu / ebay.us/TPWqvH
Amplifier Fans- amzn.to/3uDQpCK
0 gauge wire kit- amzn.to/3lW1GKr / ebay.us/iNXHlk
Big 3 Wire Kit- amzn.to/31m4KpH
Speaker Wire- ebay.us/OhZ98r / amzn.to/3cngOgL
Amplifier bass boost
setting bass boost on my amp
amp bass boost
should i use bass boost?
is bass boost helpful?
how to get louder from your amp
tuning your amplifier
🛒Shop Everything Audio⬇️Discount Code "JACOBVIRAL"
dB Meter xplicitaudio.com/product-categ...
Subwoofer Box www.down4soundshop.com/sub-bo...
Bass Knob www.down4soundshop.com/access...
Subwoofer www.down4soundshop.com/produc...
xplicitaudio.com/product-categ...
skyhighcaraudio.com 'JACOBVIRAL' Discount Code
Amplifier www.down4soundshop.com/produc...
www.down4soundshop.com/produc...
skyhighcaraudio.com 'JACOBVIRAL' Discount Code
Alternator www.down4soundshop.com/altern...
Battery www.down4soundshop.com/access...
xplicitaudio.com/product-categ...
skyhighcaraudio.com 'JACOBVIRAL' Discount Code
Speaker www.down4soundshop.com/produc...
xplicitaudio.com/product-categ...
skyhighcaraudio.com 'JACOBVIRAL' Discount Code
Accessory www.down4soundshop.com/access...
xplicitaudio.com/product-categ...
skyhighcaraudio.com 'JACOBVIRAL' Discount Code
Head Unit amzn.to/3pz2hUt
Voltage Meter amzn.to/2OfxPQu
0 Gauge Wire amzn.to/3uSpzWm
Speaker Wire amzn.to/2S31NJV
Fuse Block amzn.to/3uQCS9t
Dynomat amzn.to/3iiVeO3
Amp Fan amzn.to/3uDQpCK
Big 3 Kit amzn.to/31m4KpH
Merch- teespring.com/stores/jacob-viral
Patreon- / jacobviral
Paypal/Venmo Tip- paypal.me/JacobViral / venmo.com/jacobviral
Media- / jacobviral / jacobviral / jacobviral
2nd Channel- / jacobviral2
Wife- / jessicaviral
Recording Gear Used:
Phone- amzn.to/35GwqIG
Camera- amzn.to/3oLneu6
Holder1- amzn.to/2KhZSxa
Holder2- amzn.to/3smtEBQ
Tripod- amzn.to/39yJMrD
I receive small commission to support the channel if you purchase from affiliate links! As an Amazon Associate I earn from qualifying purchases. 
Авто/Мото
THANKS FOR WATCHING and SUBSCRIBING! MORE VIDEOS TO COME! ➡️Shop Audio: amzn.to/3lqomCw & ebay.us/6vdEev
Join me on Media➡️instagram.com/JacobViral/ & www.tiktok.com/@JacobViral & facebook.com/JacobViral/
Bro only one 10-inch speaker come on step it up. I got 2 15" Rockville Punishers 10,000 watt amp running it. GET SOME.
Don't listen to dude you suppose to turn your bass boost up and turn your bass of on your head I noticed when u use your head for bass it causes a lot of distortion
Ah man. This brings back memories. I remember in high school I had one of my first systems I put in. Cvr 12s. I was showing it to my buddy and I remember saying this, “Oh, you think that was loud?? Just wait til I turn up this bass boost.” Haha. Ah the younger me lol.
I have a crv rn and I have one 12 inch sub in class t 😂
@@braap6085 class t amplifier? Which one?
@@anglerandy5736 I did not mean to say class t 😂
@@braap6085 lmao you on that crack g 😂
@@KillToSurvive_Marley Na og
Thanks Jacob!!! I was wondering why it felt like I was clipping wayyyy to fast thanks 1000 times over
Custom EQ on the headunit you can add or decrease db at different frequency on your pioneer 80prs
I had to go back to your video watch it again to get it to my head to turn the bass boost off it was up a little bit as I didn't notice but I noticed it when I listen to it so I watched your video again finally got it through my head thanks again man you solved my problem
I just learned something thank you. I'm gonna do that today.
Dude, the way you have your truck set up with all the equipment is bad ass. I love it
Thanks man! Stay tuned more system updates coming weeks :)
best video ever. others could really learn how to make good videos by watching this. DIRECT to the point, no BS, and video goes on if you want more info. Well done my man.,
Explain to me one thing if everybody says don’t use it why does the manufacturer make it with that setting on there
Fr tho!
Because a lot of guys tune their amp wrong when actually the radio head unit has the worst clipping points. 🤣🤷♂️ if you tune every thing and never turn your head unit volume level to high to the clipping points you should have no problem turning everything else up and just get a bass knob for your amp and there's your gain for your amp and speaker right up front with you. 👍 my radio clips and max out at levels 34 and up on the volume so I set my amps and everything at my head unit volume at 25-32 max, and any song and any type of music plays clear and clean on my system. 👍 remember your system is only gonna sound as good as your volume control and levels on your head unit, if your head unit clips everything wired to it is gonna clip. 🤷♂️👍
I believe it’s a feature that if the manufacturer takes it away, they’ll lose more potential buyers than leaving it there, because the myths of it’s value persist.
Setting your bass boost to 0 sounds like you don't have subwoofer installed. :)
@@nuwavee4eva that's completely wrong. If you have your bass boost down and you don't have bass you better check your install, cuz something is jacked jp
If i turn My loudness off My bass disapears van i use it on low i usually turn My headunit up to 50 at max goes up to 62 deh-3400ub so can i use it on low without distortion? (Sorry for bad english)
Thank you so much!! This has helped me greatly
Your welcome Daniel thanks for subscribing and watching!
Awesome video and information. I was looking for information on how to tune my amplifier. I just bought 2 twelve kenwood excelon subwoofers and a kenwood excelon amplifier.
Glad to help thanks for watching and subscribing!
Just got some 12in in my 98 civic and there bumping 2500watts thx for the tip sounds more clear
You rock brother you answered my questions perfectly
Glad to help and thanks for subscribing!
Not everyone listens to their system at volume all the time. When I do I turn the volume up I turn my boost down. With just everyday driving my system sounds great with the boost at halfway. Of course with my gain set right.
That's it👍👍
Simply saying, adjust the bass boost the way you want it.. that's why the knob is there.. It makes sense.
Hello sir good information.sir which one is better car amplifier and bass tube inbuilt amplifier which one better bass tube .car amplifier ? Best sound quality please help thanks 🙏🇮🇳
TY for the demo of bass boost. Subd.
Im just getting back into car audio after 10 year from high-school, and you've helped me in so many ways, ive FINALLY got my amp tuned perfect with NO BOOST, on amp or headunit as well as all bass signal there turned down, my LPF on my amp, matching the 80hz output of my headunit, and got the gain tuned in just right, and not only is it leaning more SQ then SPL now, it even seems louder, yet more crisp.
All in all, thanks a ton boss!
About to do a FULL kicker build 🤙🙋♂️
The main use for bass boost is for head units and LOC's that don't provide enough pre-out (RCA) voltage. For example: Your head unit full tilt only puts out .4V at 40hz, but your amp only accepts .5V or higher, you can use the bass boost on the amp or head unit to amplify that .4V to get your desired gain on the amp. I've used it many times setting up systems with trash headunits because people don't want to replace them. My buddies JVC head unit would do .4V, with the gain maxed you would only get 15V on the speaker outputs on his Skar RP2k, when we set it to 6db bass boost, it was able to get to the desired 44.7V easily at around 3/4 gain with a clean wave, if the amp is made by a reputable company, they do a good job of keeping the wave relatively clean in that situation. But I HIGHLY recommend having an o-scope, because the signal can easily clip.
same i got 12x1 evl sub with 1500d mono skar amp along with kit i mean im thinking to turn on db its off so far i feel like 6 db resonable but 12 no no no , mine so far at 0 but i feel like when i turn on 6 db my hair start flyin in car lol i still dont get it man how this thing work but best on car audio world they usually turn off db unless competition let the windows shake for couple minute 😂😂
can you help me please? I have 2 12” skar sdr with a rp1200. it’s in a 2018 charger with the stock touch screen radio. i have the amp bass boost off but i like it better set in the middle at 6db, and when it’s at 12 it’s just too much. is it okay to do that or no? thank u
I noticed a MASSIVE difference in the bass extension and clarity of the bass after I set my bass boost to the 12 o'clock.
I have a 12 year old MTX RFL600D that I bought for my first car and it plus a single 12" would vibrate my mirror down with no bass boost (but I used the remote level so I guess I did technically) Years have passed and this amp has been in 2 other vehicles And I lost the remote level control. No matter what I did to the head unit I could never replicate the performance from my first system. Now its +6db and sounds as good as I remember.
This amp has no business living this long, but it just eats up the power.
@@sethglenn9022 unplugging or removing a bass knob is the same as it being turned all the way up.. So the function of the knob is only to turn the amp down, never to turn it up. The reason your now at +6db bass boost is just like every other basshead you want more over time and thus risk your equipment to get it.
@@sethglenn9022 hell yeah bro
I have the bass boost down and off on head unit, but I have a LC2i the levels on there are maxed, would that affect anything. If the bass is lowerd there. Then there would be zero bass
I did not know this . Will be adjusting thing tomorrow for sure.
Shut bass boost off?
I think the use of boost is almost enclosure-dependent. So my understanding is that bass boost on my JL JX1000/1D only increases gain on a curve around 45 hz. So I'd treat this like an EQ where I turn down gain as I turn up bass boost. I have a 10" Dayton sub in a small ported box of around .87cf. In this situation the boost is almost necessary to EQ out the lower bass that is lost with the smaller enclosure. If you have a giant box like yours, boost is superfluous.
Agree!
hey dude great info as I just got myself a new q class kicker l7 12 inch subwoofer. and don’t wanna do silly things. so big thank you and I love your videos👍👍
How is the SQ on that woofer?? I really want it
@@sanj5026 not bad for being a Kicker, but the square woofer design is absolutey dumbfounding from a science / physics perspective!
I'd greatly suggest the standard round comp Q tho for better sound / performance & of course staying away from pre-fab enclosures & ones tuned over 40 hz!
@@LTSRIDE24 The square L7 (900 Watts) is more powerful than the round..
Thanks 🙏🏽 I’m changing my bass boost to off… awesome vid…
Just bought new 12’s two of them hook everything up and turn the bass boost all the way up and my bass maxes out at like ten so I have yet to try this because I stripped the positive battery but so I’m gonna go get one tomorrow so I’ll try it with it off and see if it’s louder
my head unit is quite old, it has a 5 band eq, i set band 1 and 2 as low as they can go -10, that way my two old mids that run off the head unit directly don't distort until very close to max volume, and i'm hoping that helps clean up the signal to my amps too. my amp tho, the "bass boost" is like a volume knob, all the way down turns the amp off, and around 50% is as loud as it gets, past that it doesnt get louder so i'm assuming it's clipping so i never go that high. i have it at about 25% now and it's not as loud as it can be but i feel a lot more confident that it wont be clipping like that
Can i chime in as a music producer. We typically cut in the bass area. Like in all actuality before mastering we cut the bass to about -9db. To allow for headroom. Because the most energy is in the bass spectrum.
So really you can set your bass to negative whatever. Then adjust your bass boost.
You're leaving out most hu just have bass mid highs. That's alot of bass spectrum to control with just bass level. To tell you something about eq... there is actually sub bass, bass, low mids mid high and highs.
Your SUB frequencies are roughly 30-80. Sub frequencies are felt n more then heard.
Hi Jacob my setup i have kenwood bt620 deck. I dont have a bass knob so im using a parametric as the bass knob.
Flow is sw out to parametric to monoblock
sw level is on 0 on tape and bass knob set all the way and volume knob on parametric is set to half tilt.
Is this a viable setup? if you have a parametric will you be able to do a demo with that type of setup if possible?
thank you for the videos appreciate the effort
#not pretty but it works :)
I've always had mine up and then I go negative on head unit sounds clean to me kenwood double din set at -20 for sub level and -8 on overall bass sound is very clean until we get back to flat tweaking on bass heads
Thanks for the straightforward video, it was 100 correct for my case...lowered to 0 set all the other stuff to around 65-75% sounds way better
glad it helped
Do a video on clip light indicators and how accurate they really are and if a little flashing is OK or if it should be not flashing whatsoever.
Noted for a future video thanks for watching and subscribing! More to come 👍
Bass boost is actually very useful for what it is intended for. It increases gain at very specific and limited frequencies. If you are willing to give up some amplitude on all other bass frequencies in order to increase amplitude for the specific bass boost frequency then by all means use it. It will give you increased bass for that limited frequency range.
However, most people wouldn’t want the very peaky bass response that bass boost gives you. Therefore, they would turn this setting off.
If you are going to utilize bass boost then you absolutely MUST set your gains with the bass boost turned on.
This, plus I could see someone using this in competition (if allowed) and if they have a box that is designed to play that center frequency very well. 🤷🏻♂️
My output voltage on my rca from my android head unit is 1.5 volt. I ordered an audiopipe and cerwin vega line driver and I am going to return whichever one doesn't work but what I really need is a dac to convert my optical signal to rca. Problem is they all output at 2v. There is one that does 4.5v but it's $100 and it's 15v meant for home use. Super weird. Anyone have any suggestions?
So if u mesure by music the ratings are way lower .. by voltmeter. I kinda hate that I did a bass bosted one that ik hits hard but yet vs the frequency test its way different
Hey thanks so much for this, I will try it tomorrow. For me, it's getting the bass right. The Amp is on my active 2 channel Sub... so I'll reduce bass boost and increase Gain. When I was tuning it though, I read that I should select a Frequency and that Bass Boost would then boost THAT frequency and below. It's sounding great but why not try 😊
Your welcome glad it helps
Wonder why they put it there if your not really supposed to use it ???
id be very interested to know how you determined by this test that bass boost makes the soundwave dirty as you called it. You dont have an oscilloscope so you dont have any way to know for sure what the waveform is that the speakers and subwoofer is getting. Clipping and dirty waveform are not the same thing. Clipping is caused by your amplifier running out of headroom and the amp cant output enough power to create the whole sine wave so it clips. Clipping is easier with bass boost on because you need more power because the bass is louder but it is not the cause of bass boost on a properly installed sized and adjusted system.
I’ve been using the same amp and sub for over 15 years now and never ever used bass boost. It’s an old infinity kappa vq 12 inch sub with a basic kenwood kac-7252 500 watts rms at 4ohms bridged. Both still sound good so many years later
My head unit is set to go 35/40 and my bass boost and loudness is all off on it but my amp its on and at full blast it sounds fine and i have not noticed anything bad yet. Im gonna turn it off and try it and set my gain again. Ill report back
So I have a 3000 watt planet audio 1 ohm class D monoblock amplifier I have everything set as the same on your amp and oh my God it bangs bro.
Lol my brother in law has out 3 different sets of subs 10s 12s trying to get more base no shop could do it. I turned the base boost up and adjusted the gain and it hits so hard he almost bought a w7 13” cuz it wasn’t enough base but after I adjusted it he’s happy as heck
Great job brother
Thanks!
using bass boost on the amplifier and cranking the lows in the head units EQ is awesome and I recommend cranking it up on both as the starting point....BUT....you need to do it correctly, you need to tune your system with all of that on, basically what I am trying to say is when you're tuning it and checking for clipping and getting it locked in make sure you got everything you might use cranked on, what is cool about this is if you want to use your system in the early morning and don't want a ton of bass or during quiet times all you need to do is turn down bass boost on the amp or set the head unit EQ to flat, if you wanna play it loud for bass boomin or show someone what it is capable of simply just turn it all back up to it's "original" tune/full bass boost.
The reason it gets shit on so hard is because people tune their systems with it all set to off or "flat" and then randomly one day they try turning up bass boost or raising the lows in the head unit EQ without tuning it to that and it starts clipping and getting all messed up.
My Amp is going into protect mode couldn't figure it out so then when I turn down the bass boost it stopped now I can listen to all the songs I want but what was it doing that was causing it to go into protect mode can the bass boost change the impedance
Overheating due to more voltage probably
Best mtx terminator sub and skar 800rms amp settings?
I'm rocking big time I just wanted to thank you again dude I mean I'm slamming hard with all the money time and effort I put into this finally come alive thanks to people like you putting out these videos for people left experience like me they really helped me out I mean I got like over two grand and all this stuff and that one little adjustment wasn't all the way off and it was killing me
Your welcome Jeff 👍
You just earned another sub
Welcome to my daily videos 👍🔊
i use bass boost 1/4 of the way up gains set good i needed to tho i dont have a bass remotr knob and im running to a stock
Bro I have a 1200 amp from skar how can I do that.and what is of thing looks like foil
Damn you explain this really good in turning my bass boost down . Because I clip out when my volume is at 31 mark
Your welcome thanks for subscribing!
then how does your system sounds like now at 11-21 volume?
My pioneer amp come with a bass knob remote but... It's not a level control, it's a bass boost, it sounds terrible. My pioneer head unit default settings has 'subwoofer control' to +6db 'loudness' on mid and a setting call 'S,RTRV' on which boost all freq.
So when I put my amp in and set gain with bass boost knob remote all the way on and and also with EQ on power and bass boost in headunit on 4, and also boosted like 4 other ways in the headunit, when I was at 10 out of 62 volume I had almost max bass hahah, to make it all worse my phone also was on bass boost for the music app! How things can go terribly wrong. Now every thing is flat other than I put loudness on low because I don't listen to max volume.
In what order do I set controls on amp? I have the skar rp1200.1 and it has the gain, LPF, and subsonic. How do I set my LPF and subsonic?
Lpf and subsonic first then gain. Here’s videos for help with that : ruclips.net/p/PLkYp1Fj-99b0pFNxaohIxCaer8VxQVZ2j
So if the bass boost is off on head unit and on amp, do I only use the gain on the amp for bass? I have a jvc double din unit. It has a bass boost option and a subwoofer option that goes to +10. Is the subwoofer a bass boost also?
Just gain For the amp and flat for head unit or 0 all. The Bass subwoofer option on there some do max but user preference.
Hi Jacob I love your videos, I do have a question if you can answer it for me, I had my system installed this past weekend and I wanted the guy to wire my 2ohm dual subs down to 1 ohm, I watched him wire them and I think he wired them wrong, he put 1 wire to the positive on 1 side of subs input and the other end he put it to the negative connector on the other side of sub, and plugged the remaining wire that connect from box to amp to the remaining positive and negative terminals on sub, I believe he wired them in series, aren't you supposed to run a wire to positive to positive and a wire to negative negative to negative and then the wire from the box to sub, POSITIVE and negative? Thanks
Sounds like you need to cross reference and double check everything’s good, plus use a multimeter. Here’s a DIY Wiring video I made: ruclips.net/video/3dvhxmlBcfc/видео.htmlsi=ZrrQNd5GNTJFCZXA ; if it’s 2 subs D2, only possible to be at either .5/2/8 ohm.
Quick question is Bass Boost the same as Bass EQ? I just got a new Alpine S-A60M Amp, and I'm trying to tune it. I have a very basic set up so any help would be truly appreciated it!
Some amps will have a Bass EQ(boost) with the boost frequency , same concept i say yes
I'm running a 400watt rms kicker R 10 with a 300watt rms dual class D amp. If I set all my adjustments to max it doesn't distort at all. Maybe I need a 1000watt amp set to 3/4 gain.
😂😂😂
when i put my bass flat on my hu my door and back dash spkrs cant handlle the bass ssl dd661b basic hu has only loud and equalizer. so i put my bass at lowest piont on hu and turn loud on and bass boost on amp i turn up just enough to here it change a little. my amp is a ct sounds at 1400.1d what shld i do? if loud isnt on i have no power
Get a new head unit, speakers and a 4 channel amp for your door and dash speakers. 👍 your whole system is only as good as your head unit. Find the clipping point on your head unit 1st never go above that volume and everything else gets adjusted after and you will always have good clean sounds.
I love to meter my car at Bass Wars , I have 2 Ds18 Hooligans SPL subs RMS 4,000 watts per sub and I'm running a 10k Korean Ds18 amp could you please tell me how to set my amp and my radio up I have a Kenwood706 asking for help, so far I have metered a 150db
All the videos I have watched say no bass boost but then what is bass boost for and what is the right way to use it? What I gather from this video is bass boost can boost the bass at lower volume levels but if you crank the volume up it can clip the amp (if gains are not re-adjusted after setting bass boost), in which case why not use bass boost for lower volume levels and if you crank the volume up reduce the bass with the bass knob?
Joe bloggs.. very good question! I wish you'd gotten a response.
U rock ur volume at 20, if I bass boost, and turn my loud on and adjust everything up, mids and highs, but I keep my bass at 2 and sw at 2 on my deck its loud and clear on 10. Its hits harder bass at lower volumes. The louder I turn up the clearer the words but bass isn't as tough. If I keep everything Flat I have 2 turn up 2 30 and still don't get the clarity and bass I get at lower volumes. So I assume it personal preference and or what your running. I have a boss double din, and an Audio pipe 15 in a side port box, I had a 1000 watt boss riot amp I blew up. My back up I had was an eclipse 200 or 400 watt amp. 1st day i blew the 20 amp fuse, put in a 30 amp fuse and this bangs hard. I bought an Audio Pipe 1500 watt amp but haven't got it put in yet. So I think this will be scary loud. And now bring up bass knobs, I do not use right now. But new amp has 1. Isn't that gain, or bass boost? All big systems I see on here have that huge bass knob. Hey into that concept. Amazing videos.
He only rocks his volume at 20 for testing purposes. To keep everything consistent. When you say when you turn your volume up the cleaner the words are but the bass isn’t as “tough” doesn’t make any sense to me. At this point the subwoofers should be over taking your door speakers. I’ve heard of this but only on factory radio head units that have that bass roll off.
I got a Skar Audio system. 3 10” DDX (1000w rms) ran by RP1200 (1200w rms). i got my gains up half way, and bass boost on 6db. Its louder and still sounds clear. Is that safe?
Long as not clipping and no smell, decent voltage I say yes. I personally prefer no boost as explained in video why.
last amp i had that bass boost control didnt do anything with the remote plugged in.
I miss my old Eddie Bauer explorer. lol now im living my nostalgia in a 98 4Runner. They tend to run a little be better lol
I just installed a 700W amp to a 200W sub I read somewhere I’m supposed to at least double my sub wattage to get my amp wattage to be in the clear when choosing an amp… I only had a 200W amp and a 700W amp…
First question: When I’m trying to tune everything right off the bat should I flatten out my EQ and turn everything off as far as filters go on the head unit and dial in the dedicated sub amp or should I tune the head unit EQ FIRST with the sub off then start messing with the dials on the amp dedicated to my sub?
Question 2: I have 2 stock speakers behind my head and upgraded speakers in the kick panel with my sub centered behind the front seats (98’ Silverado) should/could I connect my aftermarket kick panel speakers to my amp with the sub and use them as amplified mids and put my stock head level speakers in high pass and use them as highs? Then the sun in low pass and dial that in after my heat unit is EQ’ed?
Set head unit, then amps.
Your power watts vs. sub will do fine.
I would use a 2/4 channel separate amp for upgraded speakers, sub amps don’t go on speakers.
Where can I purchase a center console like that? Just kidding, thanks for the tutorial 👍
Bass boost can be useful. Most people say no bass boost because it CAN most definitely clip your signal. Alot of people tell noobies not to even think about it
I used my subwoofer at max bassboost at the beginning in like 2 months, nothing scary really happened. So i dont get him saying to not use the boost
@@emzi-_- yeah he keeps saying its bad but not getting distortion, just more bass at lower volumes.
As said in the video, I think bass boost becomes an issue usually when trying to get the most out of the system (high bass boost, volume and gain). It seems to me that it is all about knowing your system's capabilities and making sure that you balance the three different kinds of volumes (the bass boost, gain, and the regular volume).
They tell us noobies what? Don't think about what? You got it bro we can't think about anything with our brains vibrating in our skulls like this anyhow.
You're right, know your systems capabilities.
I prefer to determine the capabilities by exceeding them greatly then buying the exact same amp and returning the one that smells like burnt semiconductors and plastic like I never even opened it lol.
Idk why it smells like that bro just give me my money back.
Usually by same amp number 3 or 4, I have determined its limits and only pust them about 5% past that. Rms.
What about sub level on head unit? Is that a boost because that seems like ur eq setting ?
It can be yes, best overall to be flat all around but depends on how you like your volume levels on your HU.
Source level isn't a "bass boost" per say. It's just a level to balance difference source outputs. Example - cd may play 5 "clicks" louder than Bluetooth. That level adjuster makes it so the output on each source is the same - to prevent damage when swapping sources
A an audio engineer, we use thousands of dollars in equipment and acoustic treatments to deliver the most accurate representation of what the sound is in the studio as we can. This includes ACCURATE and flat low frequency response, usually to below 30hz depending on the music. You should try to equalize that 40hz peak down to as close to flat as you can recognizing that the car structure is causing it to peak artificially. This is why so many cars, when you listen outside have that "one note" bass thump, thump. That's not accurate reproduction or being true to the artists desires. You will never hear this in a studio control room or in a properly set up live concert system. Your HI Fi has just become Lo Fi-delity.
Can anyone help me? My head unit is 14.4 v, 10-14.4v is acceptable. My 4channel amp has voltage dials .5v- 15v where do I set dials on amp? Thank you.
Go by the units RCA output voltage
So I guess I should turn the bass boost off of my subs I have 2 kicker comp r 10 w 1200 fosgate amp should I just put the gain up a little bit more and turn off bass boost and also when I just put them in they sounded very clear but after about a week or so they got distorted would that be the bass boost?
Bass boost off and gain set to match your head unit rca output match.
To Each it's own when it comes to bass and your systems.
I always thought SLA was source level adjustment which was used to equal out the volume of various sources like going from FM radio to USB , and your USB isn't as loud as the FM radio ?
ruclips.net/video/qFSrAZVttiA/видео.html
thats exactly what it is
@@akuma4u I was wondering because I use my usb as my main source of music and I keep it at the plus 3 location all the time
thats what it is for sure ... says so right here in my owners manual of my new kenwood .. so yes its for keeping all the levels the same ..
@@AudioHolic1 i use usb as main source for music too BUT ill tell you this. In the beginning, i did what you are doing too. I would put the SLA on 2 or 3 out of 4. BUT later i found keeping it at 0 and instead adjusting the gain properly, will make it sound better and cleaner and you can go all the way to almost max volume. With SLA, i found that i could get to max volume at lower volume levels. The proper way to set gain is to have everything flat and be able to play at almost your max volume without any major clipping. SLA can cause clipping easily if you are not careful.
Try keeping it at 0 and redoing your gain.
I got a hifonics alpha 1200.1 class d with two kickers hooked up what do I do put the lpf all the way to 250 then the level from minimum to like medium or put level all the way up and then lpf half way ?????
I got some more videos on the channel to help. ruclips.net/p/PLkYp1Fj-99b0pFNxaohIxCaer8VxQVZ2j. Set your LPF to around 80hz and Bass level to match head unit rca.
@@JacobViral2 head unit is factory will it be the same
What do you set subwoofer level to on the head unit? 0 or +6?
I always do flat 0 but depends on rca preout voltage goals some do +6.
What If iv got a stock radio head unit for the moment unfortunately my other radio messed up but the reason I'm asking about the 0 to 9 dB I unfortunately have since iv got the amp the gain is maxed as well as the dB 😅 no boost for the radio an it being stock also very limited in the fine tuning iv only got bass and treble so with out that boost it doesn't even seem like iv got a system back there with it all the way down please any advice u could give me
Could be needing a DSP or aftermarket radio to boost rca signal, or bigger amp
Main objective of boost is for when you set your gains with a 0db track and the songs was recorded on a -5 or even -15db track.
Its to help compensate most dsp use same technology to help this as well.
Ok so you turn base boost off,loud off but you have a base knob. Is base knob ok or does it cause clipping also.
Bass knob is fine and actually helped read when clipping
Bass Boost can be useful if you know how to use it!~
I have noticed a BIG difference with it off vs on, the bass was just not there as it was with it!~ Plus I tuned my stereo to resonate with the vehicle to sound like a concert!~
Quick question jacob! Which app did you use for db measurement and which microphone on the iphone? I’m using an app that lets me pick between the 3 mics on an iphone, just curious on what would be more accurate, i’m at about 119 currently on a 2000 watt ap 1 ohm dual 12 ap quad stacks, scared to crank it up 😵😂
Ssa studio app with dB Meter xplicitaudio.com/product-category/installation/tools/?ref=3229 meter device required
Awesome thanks for this explanation. IT doesn't make sense to boost if you have to lower the gain (smh) . I only makes sense if you sub is way bigger than the amp. like, the amp is 200 RMS and the sub is 500 RMS. which it wouldn't make sense unless you just bought random stuff xD
Hi jacob. thanks for great info. the question is
I realized that the amp gain is set at high and you are just adjusting the bass boost to get higher DB. How about setting the bass boost at half and lowering the gain?
Long as the gain is set afterward wouldn’t see why not? Idk
Yea caused I added 12 db but my gains half way turned and EQ AND HEADUNIT ALL 0
Life begins at clipping 🤣🤣🤣
So many variables counts when it comes to audio, sadly truth is many times clipping occurs when you try to achieve high end quality with low budget components, fact is bass boost works simply crank it to half then gradually crank the gain with your head unit set to desired loudness, never exceed quarter however the outcome depends on the quality built and reliability the specs from your equipments
never exceed quarter of the gain? Are you also saying to start with bass boost up at halfway and my volume up to where i know i have no distortion in my mids and highs? Then start slowly turning up the gain on my amp, also i have a bassboost frequency on my amp right next to my bass boost on my amp. Where should that dial be set at? could you send me a email? ambro_fern@yahoo.com thank you in advance.
You do relize the bass knob that you have hooked up to your amp is remote bass boost, right?
Uhhh no it isn’t 😂
Thanks Jacob 🙏🏽🙏🏽🙏🏽
I use an amp that has a little less power than my subs rms then I can use my bass boost with out causing any harm. I've done it like this and never had a problem and I had the same subs and amp for 5yrs. I'm not an expert but I know a little.
good point
What’s the app you’re using for measuring dBs??
Ssa Studio app with device
I'm gonna try that cause I have 2 zv5 12s and a scv 6000 and its clipping alot
It's all about the balance between volume, bass boost, and amp gain
Hell ya man I really hope ya read this you had lot of good info I am quite the audiophile so please try this test to see use your bass boost a little or not ant but run your loud on the CD player or do a combo of the two at a volume where the sub is xmax and then do another test at your normal setting but higher volume so we can see the DB difference when running dirty power but it's louder at lower volume then clean at high volume. Thanks again for all the awesome vids bro and that ten is sweet I'm running 10s in my system haha
Good effort buddy... I have a query, kindly answer it on your free time. Am from INDIA and am planning to fix an amplifier in my car. In this video you advised to keep the Bass boost level as zero, so no need to buy an amplifier with that bass boost, gain settings ?
Most amps have it but if it’s not included it’ll be just fine correct
@@JacobViral2 Thanks for your inputs jacob
If you had a 1500watt kicker L715 Q on a cxa1200,1. What dB n hz should I be issues gn for my amp? Thanks
Depends on your box specs and I wouldn’t use bass boost/dbs
Jacob Viral2 yes so far only used the Hz gain maybe at 50-60ish and no dB bass boost only gain and bass Knob and some bass boost Hz? Correct m?
Was wondering what your bass knob was set on
All turned up 100% for every test always with no changes between.
New sub here. I hope next video is how to set up car amp for home use.
Hey John thanks for watching and subscribing! Never had a home audio system from car equipment.
I'm using bass boost, but not much. No problems with clipping
Bass boost off ok, will my bass knob work if I have it off?? Or will it affect it?
Bass knob shouldn’t use bass boost as a factor
@@JacobViral2 Thanks, seems useless to those who are experienced and useful to the unexperienced. . If it is tuned why mess with it??
why would anyone play music at vol.40 or even 50? does head units not normally introduce distortion at volumes of 28-30?
Pioneer 80prs goes to 63 and clips at 61, normal
hello dude great video but i have a question i have bass boost on on my amp running a single 12inch pioneer champion series the amp is getting so hot and it's shutting off when i turn the volume higher could bass boost be causing my problem? it's clipping too depending on the song
Usually excessive heat and clipping will do that so just learn your limits and cut it down. Also invest in a fan: amzn.to/3yxoMNn
@@JacobViral2 hi Jacob I have a question I have a massive 121 boa sub it's 6000 rms and the amp is an orion 5000d it's 5000 rms should I get an amp that puts out the 6000 rms or is the 5000 rms is okay
@@JuanGabriel-nz9rq Nothing wrong with running an amp with less rms than the subs is rated. Long as you have the electrical and an efficient built box you'll be fine. Some people run way below rated and still get good output so your all set.
Your right man just like most audio professionals say don’t use bass boost. But some people don’t care or have bad hearing or don’t know what bass is and should sound like. When I first met one of my friends he was right rocking major distortion cause he thought if I was loud it sounded good. I helped him out and taught him about audio. Then he mentioned his lil brother would brag about how his system blows sub woofers I said ya if you don’t know what your doing you can easily blow speakers doesn’t mean you have a strong amp or it sounds good.
Hmm… people won’t use bass boost but they’ll happily tell you that you need a parametric equalizer to flatten your frequency response.
Guess what - they’re the same! All bass boost is doing is amplifying a range of frequencies. Provided that your gain is set appropriately to ensure there’s no clipping
Play a 200hz sine wave and set your gain to avoid clipping. Use an oscilloscope.
Now play a 50hz test sine wave. Does it have a lower peak-peak amplitude? Sure it does because your stock amp is probably rolling off low frequencies to protect the crappy stock speakers. Now how to boost the 50hz amplitude without clipping on the 200hz signal? You need to boost just the lower frequencies using bass boost. Add bass boost until your 40hz signal is the same amplitude as the 200hz signal and not clipping. Now double check that your 200hz signal is still clean. If it isn’t you can turn down the gain just a little - it shouldn’t need much.
Congratulations - you have used bass boost to compensate for low frequency toll off of your head unit. Your bass should sound more accurate because your frequency response is flatter - which is what everyone is trying to achieve with dsp parametric equalizers.
best explanation ever