Want a $150 Next Gen Mobility credit toward your next 100V+ EUC? All you have to do is to be subscribed to this channel and you're automatically entered into the drawing! NGM now ships worldwide to over 40 countries 😊 The winner will be selected May 1st! Link to subscribe/enter drawing: www.youtube.com/@wheelgoodtime?sub_confirmation=1
@3:22 my Extreme had the same issue with the rubber seal. Begode needs to figure this problem out. Its very hard to install the cover perfectly with the current seal design.
6:55 something I would like to see is more focused wheels instead of all arounders. We’re starting to, like the V14 and the ET Max. IDE like to see some ultra stable, low riding, street hugging machines to go with some badass off-road dedicated wheels. I’m curious how that S22 with 4 shocks feel. Makes me think of a hammock hanging from 4 springs at the corners, or a trampoline. Can’t wait until you get to test that one!
Wonderful to see how well you apparently weathered the crash. I'm wondering if a faulty valve stem might have been in play? Really enjoy all your content and thanks for providing it. 6 pac Gord
I agree 🙂 fortunately the tire is already tubeless, I'm just waiting on the angled tubeless valve stem to arrive in the mail so I can put the wheel back together again.
i’m impressed with this thing but i think i’ll wait till the next begode 168v wheel because this one seems super tall and not very torquey but it definitely has the speed i like
When it's put back together I'm going to play with the pedal tilt settings. I'm wondering if I can get a much faster off-the line speed if I put the pedals forward a few degrees. But yes it's definitely super tall
I have a begode extreme and the quality is very good compare to the V11. I spend a lot time riding the wheel but getting more difficult riding latterly. Turn out, I have lost 10lb from my 135lb weight. Now I am only weight 125lb!! Darn it!!
Yeah it's a bit excessively labor intensive 😬 two steps forward, one step back I guess 😂 it's still a good wheel, you just need to set aside a good chunk of time for the projects you intend to do.
Want a $150 Next Gen Mobility credit toward your next 100V+ EUC? All you have to do is to be subscribed to this channel and you're automatically entered into the drawing! NGM now ships worldwide to over 40 countries 😊 The winner will be selected May 1st!
Link to subscribe/enter drawing: www.youtube.com/@wheelgoodtime?sub_confirmation=1
@@oueuc2 edited, thanks!
So glad to see you doing well after a crash at that speed. That type of wreck can be devastating.
@3:22 my Extreme had the same issue with the rubber seal. Begode needs to figure this problem out. Its very hard to install the cover perfectly with the current seal design.
My extreme had that issue too!! Very frustrating.
Glad you’re ok ❤️🩹
6:55 something I would like to see is more focused wheels instead of all arounders.
We’re starting to, like the V14 and the ET Max.
IDE like to see some ultra stable, low riding, street hugging machines to go with some badass off-road dedicated wheels.
I’m curious how that S22 with 4 shocks feel.
Makes me think of a hammock hanging from 4 springs at the corners, or a trampoline. Can’t wait until you get to test that one!
My Et Max came with pinched tube, one battery cable was not connected, casket was off a wee bit.
Ride Quality on the Et Max: Im friggin Aladdin on my magic carpet. This speeeeed machine is wonderfull
Wonderful to see how well you apparently weathered the crash. I'm wondering if a faulty valve stem might have been in play? Really enjoy all your content and thanks for providing it. 6 pac Gord
would you be able to change the tires with just one side open like that?
Yes, as long as you remove the side with the motor cable. 🙂
Are you really doing the whole breakdown in the rain? LoL
No, it started to drizzle so I wrapped up the video before it got bad. The wheel didn't get too wet and it's bone dry now
Хорошо, что ушел не на встречу, а в сторону на обочину.
Tubeless tires should be standard.
I agree 🙂 fortunately the tire is already tubeless, I'm just waiting on the angled tubeless valve stem to arrive in the mail so I can put the wheel back together again.
i’m impressed with this thing but i think i’ll wait till the next begode 168v wheel because this one seems super tall and not very torquey but it definitely has the speed i like
When it's put back together I'm going to play with the pedal tilt settings. I'm wondering if I can get a much faster off-the line speed if I put the pedals forward a few degrees. But yes it's definitely super tall
@@WheelGoodTime also did you have field weakening on and if you did, how much?
@@VECTOR_Coasters I didn't have it enabled, but I'll mess with that soon
I have a begode extreme and the quality is very good compare to the V11. I spend a lot time riding the wheel but getting more difficult riding latterly. Turn out, I have lost 10lb from my 135lb weight. Now I am only weight 125lb!! Darn it!!
Really impressive progress from begode. Edit: oof I just got to the point about how easy it is to work on :(
Yeah it's a bit excessively labor intensive 😬 two steps forward, one step back I guess 😂 it's still a good wheel, you just need to set aside a good chunk of time for the projects you intend to do.
Also good to hear about NGM's support after the crash.
Wow
giving grades is just nonsense....you are not certifyed
I'm gonna do it anyway because it's my channel 😜