Sponsor: Windows 10 Pro ($17) biitt.ly/kPBz6 *NOTE: I incorrectly describe the Jonsplus Z20 as "Mini ITX" when it will fit Micro ATX motherboards as well despite the small size.* What do you think of our new 4k format? Any feedback appreciated
Great Looking Video Jason, although I'm not in the Market for a New PC Case. I am however, looking forward to your Next Video where hopefully you'll be doing a Review/w Specs & Prices on the then 'Newly Released': AM5 9000 Series CPUs!! Only to be Crushed when I look to see how much more I'll pay for those same CPUs in Canada !!
Want to mention with the fractal pop cases that they actually have a secret hatch at the bottom panel that opens up to the whole PSU cable area. This is perfect if you use a controller since you can fit it in there behind the small container, which you can use to store stuff like USB drives. Love this case for that, it's actually so useful!
“Disc drives just aren’t a thing anymore”… unless you buy a Fractal Design Pop Air / Pop Air Mini which has a cover where you can install a 5.25-inch disc drive or a number of other things.
For the pop cases, I got the white XL one. Honestly, it's one of the nicest cases I've worked with. Currently getting ready to do a hard line custom water loop in it. Waiting on parts to show up. Now The nice thing about this case is that it's made of steel. Meaning it's magnetic, useful for installing say a 360 distro plate on the side wall without drilling holes.
For those who want to buy an Aqua 3 but can't get it, the exact same case is also sold as the Antec CX200M (comes with 3 exhaust and 2 inverse intake RGB fans)
Gotta agree - the Lian Li 216 Lancool is a great case. Best bang for the buck by far. Lots of room for a monster graphics card, or even a liquid cooling loop. My only gripe is it's a bit of a 'chonker' - best to keep it on the floor next to your desk. Cheers Jason!
I'm buying a high-end PC soon and your videos have been super helpful in deciding what parts to get and why. I literally just watched your 2023 version yesterday since I realized that's the one area I haven't done much research on. This video coming out today was perfect timing haha
im so salty u guys in Amerika barely have any sales tax for tech products. if a tech product here in europe has an MSRP of €80, the final price will be €100 due to a 20% sales tax on "premium" consumer goods.
Kind 95 pro is amazing especially since it comes with six fans and pre wired already. Not mentioned are those rear fans can be moved to the front of the case and more fans can be added to back for a total of 11-12 fans if you are feeling saucy lol. Building my 2nd build 95pro all white with Sakura 7800 xt
Awesome video. I have been looking at several of these for my next build. However, what I REALLY want is a horizontal motherboard. Sure, I could just turn a regular case on its side, but that usually looks bad. Any recommendations for horizontal mobo cases?
Good stuff Jason! If you haven't already, check out the Antec C5 or C8. I got the C5 and am super happy with it. Comes with 7 fans , including 3 reverse fans, and a PWM/ARGB controller. 🤙
I too just got the C5. I used it for my all white build and it looks phenomenal. The 7 included fans, dual chamber, panoramic view, and the side RGB strip made it my number one pick for a perfect case.
I currently have 7 storage drives in my PC. 3x 3.5 HDDs, 2x 2.5 SSDs, and 2x M.2 SSDs. Most motherboards I'm looking at for my next PC have 4x SATA ports and 3x M.2 ports. I have a hard time finding cases that still have cages to mount HDDs or SSDs simply. Any thoughts on what I should look at? All these clean open looking cases don't have cages from what I can see.
@@uz.f1746 From doing searches on New Egg I found a case called the XPG Battlecruiser II. I ended up using that as my case and currently have 3x 3.5 SATA drives in it. I think I can fit another 2 drives in it, but more practically they'd have to be 2.5s size.
I would get a used case over the first option personally with the number of quality used cases on the market. Cases last a long time - I just replaced my 14-year-old office Antec P183 case with a Fractal North for the ascetic.
Thanks, Jason! 👍🏼 *Adorama* currently has the Lian Li Lancool 216 X (black, non-RGB) for *$79.99* (drop-shipped for free from Lian Li's warehouse on the west coast), and I *finally* got myself one (it should be arriving today, in fact). _Get 'em while they're hot!_ 🔥🔥🔥
I've been looking at the Phanteks NV5 and the Montech Sky Two. Sucks that the Phanteks doesn't come with any fans as that really does up the cost quite a bit.
AWESOME video as always! Love the 4k!!! I have the white version Lian Li 216 and it is hands down the best case i have ever owned. Cannot recommend it enough. Can sometimes find it on sale for $85 too. Stay well and thanks for sharing!
The Lian Li Cool 216 is phenomenal. It has a FANTASTIC/RGB hub in the back that supports up to 3-4 fans, it has installed Velcro for cable management as well as zip ties that come with the case. It has 360 AIO support but if you want a 240 it comes with panels to close the 120mm gap that’s left. It’s just a good case. Very easy to build in, it was my first pc build and I’d recommend it 100%
The latest case that has caught my eye is the Antec C7. Cant say if i would buy it yet as i havnt seen the price yet. I really like what Montech have been doing with cases. They are one of those brands that have decided to give people more for their money. Ive had it with brands who will give you 3 front fans and no exhaust fan. And then with cases like the Montech air 903 MAX they include a fan controller, just that much better value. As always loved the video, and love the cat content. Thanks Jason.
I got the antec c5 I think it’s a steal it comes with 7 argb PWM fans and a rgb strip and support rear connector motherboards couldn’t ask for anything more tbh
I really liked the Omen 45L case, I have two, it was 69 bucks at one point, having the AIO outside the main case is genius! Bear likes the white cases the best I see!
I differ with you a little on the percent of budget, depending on the situation. If you don't need the most computing power possible now, get an upgrade friendly MB (like AMD) with lower end (or fewer - 1 ram stick instead of 2, 1 SSD instead of 2, 2 fans instead of 6) components that can be easily upgraded in a few months when you have more money, and spend more on a case you want for a long time that's easy to work with. It's much easier to switch or add components than getting a new case. The case is like the foundation of the computing house. However, if your priority is straight computing power as soon as possible, your recommendation to spend a smaller percentage on a case makes good sense. Also, some people may just enjoy rebuilds, even if it's the same guts. In January, upgraded from a Phanteks Enthoo Pro to a be quiet! Dark Base Pro 901, and just moving the parts was fun for me.
@@libertyprime9307 , yes, I can definitely see why that may be true in some builds. I apologize for the lack of clarity. It was just one example of many ways to cut spending upfront to get a better tower at the beginning of a budget build. If a person puts a high priority on a quality long-term tower, that may be a tradeoff they're willing to make. RAM is so cheap that buying the second stick on next month's wage might even be possible, though it is less cost efficient and less performant than just having a pair to start with. Sometimes, I've started with a single stick because I wanted to max the capacity of each slot but couldn't afford two sticks while doing that initially. I always end up maxing out my RAM slots, and I don't like to buy RAM twice (replace 2x16GB with 2x32GB later, for example). I would rather just start with 1x32GB than start with 2x16GB, and I've never had a regrettable experience from this approach, even if I'm not winning online benchmark competitions or squeaking out 2-5 more fps. I also prioritize GPU spending over RAM speed/performance, because its direct impact on performance is more substantively observable immediately. I just need enough RAM to prevent my disk from being used and to allow complex 4K or 6K video edits to take as much RAM as they want. I don't know what build you'll do next, but I hope you have a blast with it and that it exceeds your needs and expectations. Thank you for the feedback.
I currently have a Corsair Obsidian 750D Airflow Full Tower case but thinking when i do my upgrade to purchase the new Corsair 9000D and move what I am keeping from my current machine into the newer super case when it is eventually released.
Very excited about the Montech XR, can't wait for it and the mesh version to be released in my region! Do you think the Montech stock fans are good or is it worth replacing them with something else?
I'm just wondering, for the H6 Flow, it doesn't have any dust filters on it - is this a problem? Because I want this case ...and did you say that only intake should actually have dust filters and not the exhaust? Thanks!
If i swap my motherboard and cpu is there anything specific i need to do? Or does Windows automatically detect everything i had on my current equipment?
You will have to find and reinstall the drivers for the new cpu like chipset drivers. It should work out of the box. Windows might unactivate, but you can reactivate it with your key. If it was an oem key from a pre-built you have to "find" a way to reactivate it.
Hey Jason thanks for the video but you said the Lancool 215 is a terrible case and I'm wondering why. The mesh 215 version is a great airflow case according to Gamers Nexus' review.
I just finished my king 95 pro in white 2 days ago! I recommend the Frozen Prism 360m aio from thermalright right for $59. Went all white with the gigabyte aorus elite ax ice edition, trident Z neos in white, and the asrock steel legend. It came out beautifully. Absolutely banger of a case, and the controller had the extra room for all 3 fans in the aio so it was literally a breeze!
@@KartikPatil-uy6ub try the steel legend 7900gre. It’s like $10 more than the sapphire 7800xt and with a quick memory overclock, you get within 8% of the 7900xt which leaves you at roughly 20% ahead of the 7800xt. For $10 that’s absolutely worth it. I was about to pick the 7800xt, but once I saw the gre price for so little more, I couldn’t pass it up.
@@Bballfan1992 i got the white king non-pro so i could match the fans of the white Frozen Prism 360m aio i got for $57. great AIO, great case! i went with the asrock taichi lite motherboard and 7800x3d and kept my XFX RX 69509xt from my previous build.
Whenever I am working on a new build, I always find myself coming to your videos to pick the case I build in. I appreciate the consistent updates and hope they continue to come!
I bought the king 95 pro and the front audio mic doesn’t work on it even though I plugged it in correctly. Now my cord on my gf 560 mic won’t reach. :( idk what do go
I'm absolutely in love with my NZXT H6 Flow case super easy to build in and do cable management. I went with the non rgb version and then changed out to different fans adding the 2 in the basement. Total of 5 fans and the pc runs as cool as i would hope for in an air cooled setup. Great video and thank you for ideas for my budget build in gonna do for my dedicated ATS/ETS rig since it don't need to be flashy
It wasnt the 7900xtx or the 5800x3D but the Fractal Torrent case that I bought, when I realized Im a PC enthusiast..If u like spending time on your pc, it surely is a good feeling to look at a nice looking case that u chose matching your aesthetic taste and/or your airflow preferences. So I would say : dont cheap out on cases. Btw very nice that Mr Bear gave his financial go to upgrade your set up, Team PC builder. Finally 1440p and up!
Just went with the original o11 dynamic from lian li. I know is an older version,but it suits all my current needs. Is replacing the infamous bequiet dark base pro 900 witch is not a bad case by any means. Is just that i moved the pc unit onto a shelf,and i want easy acces to I/O panel control. Didnt went with the evo version of o11 dynamic because i dont like the solution they put with all those cables of the I/O control panel(witch by the way,looks cheep,plasticky). I know that you can reposition the I/O control panel to whatever your needs,i just dont like that aproach.
Gracias señor por sus videos. Los veo hace tiempo y es mi primer post. Primero que todo excelente su información, bien redactada, categorias, precios, etc Un like obviamente. Y comparto sus videos para que la gente vea más allá de lo que puede ser, armas un pc. Usted es un crack master! Bless! 😊. Saludos desde Chile
I’m making my first PC with the king and 95 pro but see says I need a certain USB adapter that I can’t find online please help exact issue” A USB 3.2 Gen 2 to USB 3.2 Gen 1 header adapter is required.”
@@ThatGuyNexttDoor so that issue is nothing to worry about. I've seen that before trying to help people out who have selected that Case and looking online found out it's fine. Looking at your build however I see your CPU Cooler is out of stock. You can also save a little on the Motherboard, and SSD, and get a better PSU and White RAM for not a lot more. List / mXwGpB in PC Part Picker
@@ThatGuyNexttDoorbut if that's something that does really concern you just get the ASRock X670E Steel Legend Motherboard and that note goes away. That Motherboard has 2 3.2 Gen 1 Headers vs the ASUS or Gigabyte White B650 Motherboards which have 1. Having 2 on the Motherboard makes that note go away through again it's not a big deal. It's / QLWgB in PC Part Picker.
Hi, love the video, i've been searching a case to replace my NZXT S340 Elite, i've been looking at NZXT H7 Flow, i really liked it , is it a bad case overall. should i maybe search another case?
Wow, Aqua 3 case $59. Insane! The Montech looks amazing for $63!!! Holy Cow Batman….. you knocked this out of the park!!! Not one bad case and every single one was a value for its category and class.
Hi Jason! I really like the Sharkoon V1000 RGB, mATX case It comes with 3 Argb fans, has good airflow and an internal CD drive-slot. I miss the days where every laptop and tower pc had internal drives In my region it costs 75€ including taxes or 60€ without taxes. Btw. There are different versions. I refer to the one with a glass side panel and a mesh front for optimal airflow
I'm looking for a pc case atx Preferably mid tower. I perfer on the smaller side so table can fit it in kind of tight on space. My best option right now is to place it on the lower shelf on my desk
I just put my system that I built this past January into a new, more spacious case. It’s the Thermaltake Ceres 500. Much better air flow. It comes with its own adjustable GPU support and four ARGB 140mm fans. I finally gave in to not having internal drive bays for my DVD burner and USB hub so I got external versions for both.
Glad to see the Hyte Y40 on this list. I chose this case for my 7800x3d/4080S build because it just looks so good & offers vertical gpu mounting. I have mine fully spec’d out with fans and my thermals are fantastic. I play @ 4k & GPU never goes above 70•C~ even in the most demanding games.
I love my bequiet case. It came with 3x120 and 1x160 of their RGB fans all pre installed and cable managed very well. It has easily removable screens and keeps everything nice and cool and of course does it quietly.
I got myself a CTE C750 Air, it cost me 149$, i love that case and it was really my only option in the premium category since, where i live (Mexico), for example the Montech King 95 pro cost 200$. Even if it had the same cost i would've gotten the C750, i just love the look of that case and all the options you have to mount hardware on it.
Thanks for these reviews, Jason. I always like how concise and simple you make them (they need more cat though, LOL). I'm looking to move my latest build out of a 10+ year old Zalman MS800+ mid-tower case (pretty rudimentary but it has the unique feature of a powered SATA backplane for three drives with a bonus 90mm fan) and was wondering if you've had any experience with the SAMA Neview 4503 case?
What about the Phanteks Nv5 for when it comes to positive air pressure? It has 4 intake, 4 exhaust. Should I negate the 1 rear exhaust? What are your thoughts?
currently rocking the montech air 100 argb. Been thinking of either buying a new case (something smaller probably) or changing my fans to bigger ones/adding an AIO cooler. Video came in time!
Currently building on a h6 flow white ,pretty sure the rear takes only 1 fan , great video keep it up , building a pc with watching your videos over the last couple months ,awesome content as always.
I window shop for mitx cases. My kids may get interested in having a pc/console in a year or two, and I would like to combine it with our aging dvd player and make a gaming/media center that can run dvds and perhaps be a steam-machine
Does anyone know if the BitFenix Nova Mesh mATX will accommodate a RX 6800? I've been looking at dimensions, and it appears that it'll be close. What about if it'll fit a 4090 if I eventually wanted to upgrade? I basically want a future-proof case, and it looks like that means extra space. Can the BitFenix meet that standard? If not, I'll looking at the NZXT H5. That opens up many other options.
I've had my Phanteks Eclipse P400 for over 4 years and can't quite justify upgrading it. I often daydream of a complete new build, hence my viewership here rn. thanks for the video!
Both are good. I believe Jason's currently PC Case is the G500A if that helps. I know it was at one point but unsure if it still is. Just note if you get the G500A it doesn't come with a Rear Fan so you'll need to get one.
Sorry I got to the party so late. Busy weekend, bunch of family from out of town here. Just got home from a baseball game. Great video, as usual... but I'm curious why you didn't mention Thermaltake's Tower series in any of them. The Tower 200 for 100 bucks feels like a steal. Comes with 2 140mm (non-RGB) fans included. I just put them in the back for exhaust and used other RGB fans up front for the aesthetic.
Sounds like a great weekend! Thermaltake makes good stuff but I'm not a big fan of their pricing so they didn't make the cut here. But great to hear that you've had a good experience with them!
Places like Australia and New Zealand, buying a PC case is hard and must consider the physical size, because many Matx cases wont fit a 3x fans GPU and we don't really have enough options for both PC cases and GPUs.
4 месяца назад
I just got the lian li 216 for $50, open box from microcenter! Amazing and well thought out case. You can tell they really used their brains when designing it. Pleasure to build in.
There's no speed difference, that entirely depends on your GPU/CPU combo in your build. Mini itx is a lot harder to build in and you have to be much more careful about your part choices. I don't recommend mini itx builds to new builders personally, if you are looking for a small footprint but manageable build I'd go for the mATX options
Sponsor: Windows 10 Pro ($17) biitt.ly/kPBz6
*NOTE: I incorrectly describe the Jonsplus Z20 as "Mini ITX" when it will fit Micro ATX motherboards as well despite the small size.*
What do you think of our new 4k format? Any feedback appreciated
Ahaha man, I was just buying a new case, you are a mindreader! I recently subscribed, and 4k is fantastic. Your channel is awesome!
love it
It looks great!
I can clearly see the whiskers on your chin!
😇
Great Looking Video Jason, although I'm not in the Market for a New PC Case. I am however, looking forward to your Next Video where hopefully you'll be doing a Review/w Specs & Prices on the then 'Newly Released': AM5 9000 Series CPUs!! Only to be Crushed when I look to see how much more I'll pay for those same CPUs in Canada !!
I can't be mad that you give us format options!! I am in 1440p. But you look great on my ultrawide OLED. Great Content!
Even if I'm not looking for the item, videos from Jason always brighten up my feed!
Have a great Friday! Thanks for watching
My Favorite Breakfast Videos!!!
STOP BUYING BAD PC CASES!📢📢📢
THATS RIGHT! (;
Great advice
@@PCBuilderChannel Im JASONNNNNNNNN
Okay
You can’t really buy a bad pc case it’s just a case if you like it you like it
Want to mention with the fractal pop cases that they actually have a secret hatch at the bottom panel that opens up to the whole PSU cable area. This is perfect if you use a controller since you can fit it in there behind the small container, which you can use to store stuff like USB drives. Love this case for that, it's actually so useful!
Thanks for sharing!
“Disc drives just aren’t a thing anymore”… unless you buy a Fractal Design Pop Air / Pop Air Mini which has a cover where you can install a 5.25-inch disc drive or a number of other things.
For the pop cases, I got the white XL one. Honestly, it's one of the nicest cases I've worked with. Currently getting ready to do a hard line custom water loop in it. Waiting on parts to show up. Now The nice thing about this case is that it's made of steel. Meaning it's magnetic, useful for installing say a 360 distro plate on the side wall without drilling holes.
For those who want to buy an Aqua 3 but can't get it, the exact same case is also sold as the Antec CX200M (comes with 3 exhaust and 2 inverse intake RGB fans)
Just bought the Montech king 95 pro!! Dual chamber with 6 argb fans!! Great case I recommend easy and lots of space
Can I put a microatx in it?
Gotta agree - the Lian Li 216 Lancool is a great case. Best bang for the buck by far. Lots of room for a monster graphics card, or even a liquid cooling loop. My only gripe is it's a bit of a 'chonker' - best to keep it on the floor next to your desk. Cheers Jason!
Thanks for sharing!
I'm buying a high-end PC soon and your videos have been super helpful in deciding what parts to get and why. I literally just watched your 2023 version yesterday since I realized that's the one area I haven't done much research on. This video coming out today was perfect timing haha
So glad we can help! That means a lot. Best wishes on your build you got this!
I bought a Lancool 216 during Amazon prime for $94 and it's a great case and there's even enough space left over for my bust of Shakespeare.
Forsooth thine PC hath class!
@@PCBuilderChannel I am fain i hath built mine own bethinking machine in this wond'rful boxeth
im so salty u guys in Amerika barely have any sales tax for tech products. if a tech product here in europe has an MSRP of €80, the final price will be €100 due to a 20% sales tax on "premium" consumer goods.
216 GOAT - great cooling performance solid construction decent price
80$ for a chinesium 3 fan case is not a decent price.
@@Norim_Lian li is a good company lil bro
Kind 95 pro is amazing especially since it comes with six fans and pre wired already. Not mentioned are those rear fans can be moved to the front of the case and more fans can be added to back for a total of 11-12 fans if you are feeling saucy lol. Building my 2nd build 95pro all white with Sakura 7800 xt
Awesome video. I have been looking at several of these for my next build. However, what I REALLY want is a horizontal motherboard. Sure, I could just turn a regular case on its side, but that usually looks bad. Any recommendations for horizontal mobo cases?
Good stuff Jason! If you haven't already, check out the Antec C5 or C8. I got the C5 and am super happy with it. Comes with 7 fans , including 3 reverse fans, and a PWM/ARGB controller. 🤙
I too just got the C5. I used it for my all white build and it looks phenomenal. The 7 included fans, dual chamber, panoramic view, and the side RGB strip made it my number one pick for a perfect case.
Thanks for the tip!
What do you think about the be quiet! Silent Base 802?
Me too I am interested by be quiet cases how do they get positioned compare to those premium ?
Honestly, better than any case he recommended if you want good airflow. But I prefer the Fractal Meshify 2 or Torrent for this purpose.
I currently have 7 storage drives in my PC. 3x 3.5 HDDs, 2x 2.5 SSDs, and 2x M.2 SSDs. Most motherboards I'm looking at for my next PC have 4x SATA ports and 3x M.2 ports. I have a hard time finding cases that still have cages to mount HDDs or SSDs simply. Any thoughts on what I should look at? All these clean open looking cases don't have cages from what I can see.
lianli o11 dynamic evo has them i think. check the other models as well
@@uz.f1746 From doing searches on New Egg I found a case called the XPG Battlecruiser II. I ended up using that as my case and currently have 3x 3.5 SATA drives in it. I think I can fit another 2 drives in it, but more practically they'd have to be 2.5s size.
What do you think of the new lancool 207, when compared to 216?
I would get a used case over the first option personally with the number of quality used cases on the market. Cases last a long time - I just replaced my 14-year-old office Antec P183 case with a Fractal North for the ascetic.
Thanks, Jason! 👍🏼
*Adorama* currently has the Lian Li Lancool 216 X (black, non-RGB) for *$79.99* (drop-shipped for free from Lian Li's warehouse on the west coast), and I *finally* got myself one (it should be arriving today, in fact).
_Get 'em while they're hot!_ 🔥🔥🔥
Nice!!
Insane timing. I needed to order a case literally today.
Nailed the timing! (; Hope this is helpful!
I've been looking at the Phanteks NV5 and the Montech Sky Two. Sucks that the Phanteks doesn't come with any fans as that really does up the cost quite a bit.
Really frustrating!
AWESOME video as always! Love the 4k!!!
I have the white version Lian Li 216 and it is hands down the best case i have ever owned. Cannot recommend it enough.
Can sometimes find it on sale for $85 too.
Stay well and thanks for sharing!
So glad you liked it! 4K is here! And yes, Lian Li Lancool 216 is just really hard to beat for $100! :)
Okinos Aqua 7 is sick!! I use it in Pc flipping (I do higher end builds) and it comes with 9 RGB fans and a hub!!!
Nice!
I went with a Montec king95 open box at Newegg for 109.00 that’s with the fans not a bad price if the open box isn’t too bad.
wow 4k makes a big difference. Thanks Jason
Yes! So excited (:
I bought my montech air 100 argb for about $40.
Nice new hair btw!
Wow!
And thank you
The Lian Li Cool 216 is phenomenal. It has a FANTASTIC/RGB hub in the back that supports up to 3-4 fans, it has installed Velcro for cable management as well as zip ties that come with the case. It has 360 AIO support but if you want a 240 it comes with panels to close the 120mm gap that’s left.
It’s just a good case. Very easy to build in, it was my first pc build and I’d recommend it 100%
The latest case that has caught my eye is the Antec C7. Cant say if i would buy it yet as i havnt seen the price yet. I really like what Montech have been doing with cases. They are one of those brands that have decided to give people more for their money. Ive had it with brands who will give you 3 front fans and no exhaust fan. And then with cases like the Montech air 903 MAX they include a fan controller, just that much better value.
As always loved the video, and love the cat content. Thanks Jason.
I got the antec c5 I think it’s a steal it comes with 7 argb PWM fans and a rgb strip and support rear connector motherboards couldn’t ask for anything more tbh
I really liked the Omen 45L case, I have two, it was 69 bucks at one point, having the AIO outside the main case is genius! Bear likes the white cases the best I see!
Thanks for sharing! And hey just enjoys anything that comes out of a box he can explore (;
I differ with you a little on the percent of budget, depending on the situation. If you don't need the most computing power possible now, get an upgrade friendly MB (like AMD) with lower end (or fewer - 1 ram stick instead of 2, 1 SSD instead of 2, 2 fans instead of 6) components that can be easily upgraded in a few months when you have more money, and spend more on a case you want for a long time that's easy to work with. It's much easier to switch or add components than getting a new case. The case is like the foundation of the computing house.
However, if your priority is straight computing power as soon as possible, your recommendation to spend a smaller percentage on a case makes good sense. Also, some people may just enjoy rebuilds, even if it's the same guts. In January, upgraded from a Phanteks Enthoo Pro to a be quiet! Dark Base Pro 901, and just moving the parts was fun for me.
1 RAM stick is silly though.
@@libertyprime9307 , yes, I can definitely see why that may be true in some builds. I apologize for the lack of clarity. It was just one example of many ways to cut spending upfront to get a better tower at the beginning of a budget build. If a person puts a high priority on a quality long-term tower, that may be a tradeoff they're willing to make.
RAM is so cheap that buying the second stick on next month's wage might even be possible, though it is less cost efficient and less performant than just having a pair to start with. Sometimes, I've started with a single stick because I wanted to max the capacity of each slot but couldn't afford two sticks while doing that initially. I always end up maxing out my RAM slots, and I don't like to buy RAM twice (replace 2x16GB with 2x32GB later, for example). I would rather just start with 1x32GB than start with 2x16GB, and I've never had a regrettable experience from this approach, even if I'm not winning online benchmark competitions or squeaking out 2-5 more fps. I also prioritize GPU spending over RAM speed/performance, because its direct impact on performance is more substantively observable immediately. I just need enough RAM to prevent my disk from being used and to allow complex 4K or 6K video edits to take as much RAM as they want.
I don't know what build you'll do next, but I hope you have a blast with it and that it exceeds your needs and expectations. Thank you for the feedback.
I currently have a Corsair Obsidian 750D Airflow Full Tower case but thinking when i do my upgrade to purchase the new Corsair 9000D and move what I am keeping from my current machine into the newer super case when it is eventually released.
I would only worry about upgrading your case if you have maxed out your GPU and CPU choices
Hellol i have a motherboard x99 mr9a pro m3 plus H 300mm B 2015mm wich case to buy?
Very excited about the Montech XR, can't wait for it and the mesh version to be released in my region! Do you think the Montech stock fans are good or is it worth replacing them with something else?
Me too! I am planing to build in one soon and planing to use their fans
I'm just wondering, for the H6 Flow, it doesn't have any dust filters on it - is this a problem? Because I want this case ...and did you say that only intake should actually have dust filters and not the exhaust? Thanks!
Another great video from Jason. Hope we see that Montech XR build on RUclips.
Thank you!
If i swap my motherboard and cpu is there anything specific i need to do? Or does Windows automatically detect everything i had on my current equipment?
You will have to find and reinstall the drivers for the new cpu like chipset drivers. It should work out of the box. Windows might unactivate, but you can reactivate it with your key. If it was an oem key from a pre-built you have to "find" a way to reactivate it.
Hey Jason thanks for the video but you said the Lancool 215 is a terrible case and I'm wondering why. The mesh 215 version is a great airflow case according to Gamers Nexus' review.
I'm going for a White build and Montech King 95 Pro just looks simply Majestic. Also the number of fans with bottom ones for GPU are a plus.
Nice!
I just finished my king 95 pro in white 2 days ago! I recommend the Frozen Prism 360m aio from thermalright right for $59. Went all white with the gigabyte aorus elite ax ice edition, trident Z neos in white, and the asrock steel legend. It came out beautifully. Absolutely banger of a case, and the controller had the extra room for all 3 fans in the aio so it was literally a breeze!
@@Bballfan1992 Yeah, I'm going for the same motherboard with RX 7800xt by Sapphire. Will take not of the rest you recommended. 🙌
@@KartikPatil-uy6ub try the steel legend 7900gre. It’s like $10 more than the sapphire 7800xt and with a quick memory overclock, you get within 8% of the 7900xt which leaves you at roughly 20% ahead of the 7800xt. For $10 that’s absolutely worth it.
I was about to pick the 7800xt, but once I saw the gre price for so little more, I couldn’t pass it up.
@@Bballfan1992 i got the white king non-pro so i could match the fans of the white Frozen Prism 360m aio i got for $57. great AIO, great case! i went with the asrock taichi lite motherboard and 7800x3d and kept my XFX RX 69509xt from my previous build.
Whenever I am working on a new build, I always find myself coming to your videos to pick the case I build in. I appreciate the consistent updates and hope they continue to come!
That's so great to hear! Thank you for the feedback it means a lot. Best wishes on the build!
16:23 What does the RX means here? I can't find a Lancool 216RX here in my country.
Had to buy a new pc case due to my new fan not being able to fit inside it, your video was a great help thank you so much!
Glad I could help!
I bought the king 95 pro and the front audio mic doesn’t work on it even though I plugged it in correctly. Now my cord on my gf 560 mic won’t reach. :( idk what do go
Seriously man, well done as always. There's a reason I turn to your videos whenever I consider new parts for a build.
Thank you so much! Glad to help
My pick for ITX is the Dan A4-H2O. It supports gpus like the 4090 while still being super small, as well as liquid cooling
Nice! Thanks for sharing
I'm absolutely in love with my NZXT H6 Flow case super easy to build in and do cable management. I went with the non rgb version and then changed out to different fans adding the 2 in the basement. Total of 5 fans and the pc runs as cool as i would hope for in an air cooled setup. Great video and thank you for ideas for my budget build in gonna do for my dedicated ATS/ETS rig since it don't need to be flashy
Nice! Thanks for sharing
It wasnt the 7900xtx or the 5800x3D but the Fractal Torrent case that I bought, when I realized Im a PC enthusiast..If u like spending time on your pc, it surely is a good feeling to look at a nice looking case that u chose matching your aesthetic taste and/or your airflow preferences. So I would say : dont cheap out on cases.
Btw very nice that Mr Bear gave his financial go to upgrade your set up, Team PC builder. Finally 1440p and up!
Just went with the original o11 dynamic from lian li. I know is an older version,but it suits all my current needs. Is replacing the infamous bequiet dark base pro 900 witch is not a bad case by any means. Is just that i moved the pc unit onto a shelf,and i want easy acces to I/O panel control. Didnt went with the evo version of o11 dynamic because i dont like the solution they put with all those cables of the I/O control panel(witch by the way,looks cheep,plasticky). I know that you can reposition the I/O control panel to whatever your needs,i just dont like that aproach.
Gracias señor por sus videos. Los veo hace tiempo y es mi primer post. Primero que todo excelente su información, bien redactada, categorias, precios, etc
Un like obviamente. Y comparto sus videos para que la gente vea más allá de lo que puede ser, armas un pc.
Usted es un crack master!
Bless! 😊. Saludos desde Chile
Muchas gracias! Thanks so much for watching and sharing, glad you're enjoying the channel! Saludos from the States! :))
@@PCBuilderChannel gracias. Y que tenga una excelente jornada señor
I’m making my first PC with the king and 95 pro but see says I need a certain USB adapter that I can’t find online please help exact issue” A USB 3.2 Gen 2 to USB 3.2 Gen 1 header adapter is required.”
This is my PC part picker list code. pLsqCd
@@ThatGuyNexttDoor so that issue is nothing to worry about. I've seen that before trying to help people out who have selected that Case and looking online found out it's fine.
Looking at your build however I see your CPU Cooler is out of stock. You can also save a little on the Motherboard, and SSD, and get a better PSU and White RAM for not a lot more.
List / mXwGpB in PC Part Picker
@@ThatGuyNexttDoorbut if that's something that does really concern you just get the ASRock X670E Steel Legend Motherboard and that note goes away.
That Motherboard has 2 3.2 Gen 1 Headers vs the ASUS or Gigabyte White B650 Motherboards which have 1. Having 2 on the Motherboard makes that note go away through again it's not a big deal.
It's / QLWgB in PC Part Picker.
@@kelley09162 Ty
I do enjoy your videos and the hands gimmick at the start is great but that's the hand signal for "go ahead" or "proceed slowly".
Hi, love the video, i've been searching a case to replace my NZXT S340 Elite, i've been looking at NZXT H7 Flow, i really liked it , is it a bad case overall. should i maybe search another case?
What do you think of the Lian Li A3?
Wow, Aqua 3 case $59. Insane! The Montech looks amazing for $63!!!
Holy Cow Batman….. you knocked this out of the park!!! Not one bad case and every single one was a value for its category and class.
Thank you!
Why did you not consider the antec c5 argb? 130 euros with 7 argb preinstalled fans, plenty of space and better temps than the h6 flow.
Is liquid cooling quieter than air cooled in general? I hate noise but also really like to see the well designed system with lighting.
Yes
Hi Jason!
I really like the
Sharkoon V1000 RGB, mATX case
It comes with 3 Argb fans, has good airflow and an internal CD drive-slot. I miss the days where every laptop and tower pc had internal drives
In my region it costs 75€ including taxes or 60€ without taxes.
Btw. There are different versions. I refer to the one with a glass side panel and a mesh front for optimal airflow
Thanks your thoughts. I would add the Lian-Li Vision Chrome. Besides its beauty is the two rear fan capability to move the noise away from the user.
Thanks for sharing!
i want a tower case with proper fan mounts without any glass. I dont want to see inside or buy rgb. Hard to find
Hi, what cases do you recommend for «vertikal» GPU (4090) installation?
Fractal all the way for me. So much thought goes into their products.
I'm looking for a pc case atx
Preferably mid tower. I perfer on the smaller side so table can fit it in kind of tight on space. My best option right now is to place it on the lower shelf on my desk
I just put my system that I built this past January into a new, more spacious case. It’s the Thermaltake Ceres 500. Much better air flow. It comes with its own adjustable GPU support and four ARGB 140mm fans. I finally gave in to not having internal drive bays for my DVD burner and USB hub so I got external versions for both.
Thanks for sharing!
Glad to see the Hyte Y40 on this list. I chose this case for my 7800x3d/4080S build because it just looks so good & offers vertical gpu mounting. I have mine fully spec’d out with fans and my thermals are fantastic. I play @ 4k & GPU never goes above 70•C~ even in the most demanding games.
I love my bequiet case. It came with 3x120 and 1x160 of their RGB fans all pre installed and cable managed very well. It has easily removable screens and keeps everything nice and cool and of course does it quietly.
Thanks for the tip!
I got myself a CTE C750 Air, it cost me 149$, i love that case and it was really my only option in the premium category since, where i live (Mexico), for example the Montech King 95 pro cost 200$.
Even if it had the same cost i would've gotten the C750, i just love the look of that case and all the options you have to mount hardware on it.
I have the Lancool 216. What an excellent case! Air flow, assembly, maintenance, everything the way you always wanted.
yeah I got the 216 after watching one of Jason's guides, best case I have used and looks good too.
@@russhodgson5209 It's a damn good case
216 owner here as well newb builder case made the 360 aio install EASY
Can it fit a 420 AIO?
Thanks for these reviews, Jason. I always like how concise and simple you make them (they need more cat though, LOL). I'm looking to move my latest build out of a 10+ year old Zalman MS800+ mid-tower case (pretty rudimentary but it has the unique feature of a powered SATA backplane for three drives with a bonus 90mm fan) and was wondering if you've had any experience with the SAMA Neview 4503 case?
Been looking to start a new build and this is exactly what I have been looking at for the last two weeks!! thank you Jason!!!
Glad to help! Best wishes on the build!
What about the Phanteks Nv5 for when it comes to positive air pressure? It has 4 intake, 4 exhaust. Should I negate the 1 rear exhaust? What are your thoughts?
Any thoughts about the Asus ap201?
3 exhaust fans and 2 + 1 (80mm) fan is good?
Hi Jason! Have you had any experience with the Antec C5? Love your videos
Are there any cases that support a top mounted 420 AIO radiator?
how does the NZXT H5 Elite compare to the H7 elite? they are both in relatively the same price range and was looking between the two
Different camera? looks nice.
It sure is! We upgraded to a new camera and this is our first video in 4k!
Montech is not available what do say about Antec C8 case. When compared with Montech and Lian Li O11 D
Antec C8 is good but generally sold without any fans so just factor that into your budget
What about the thermaltake 300 micro tower? It's so pretty!
I've been thinking about that one or the bigger 500
I want a horizontally mounted motherboard and am interested in a Thermaltake Tower 300 micro case. Do you think this is a good one?
Thermaltake generally makes good stuff! Their pricing just prevents them from making the cut here
Any new/good inverted cases or is it still just the Lian Li 011 Dynamic EVO?
I'm not as familiar with all the inverted case options to be honest
currently rocking the montech air 100 argb. Been thinking of either buying a new case (something smaller probably) or changing my fans to bigger ones/adding an AIO cooler. Video came in time!
Just picked up an a3 lian li case for my micro atx build. $70 for a good lian li case just have to figure out where to add fans if needed.
Currently building on a h6 flow white ,pretty sure the rear takes only 1 fan , great video keep it up , building a pc with watching your videos over the last couple months ,awesome content as always.
Awesome! Best wishes on the build!
I bought a Asus ap201 never got around too utilizing it as I decided I want a atx case instead of micro atx size case. Is the fractal North any good?
Fractal North is a great case if you are looking for wood panels
should i get montech air 903 max white, or phanteks XT pro ultra white?
Both are good. Just depends on what you like the look of more.
Banger video as always jason^^ Is the Endorfy arx 700 a good case?
Jason, did you get a new camera? First 4k vid I've seen on this channel. Looks great on my g80sd oled.
Yes! Brand new camera and first 4k video. Thanks for the feedback that's really helpful
I window shop for mitx cases. My kids may get interested in having a pc/console in a year or two, and I would like to combine it with our aging dvd player and make a gaming/media center that can run dvds and perhaps be a steam-machine
What case is the one you have at the beginning of your video to the right? (Black and grey one)
Phanteks G500A
I used Lancool 216 for my first build a few months ago. I love it sometimes I just turn my pc on to look at it.
Right?
WELCOME BACK TO PC BUILD IMMM JASON !!! best moment of the video.
Happy you like that :)) Thanks for tuning in!
I got a Corsair 5000D cuz it got fairly high praise from other PC RUclipsrs 😅
Does anyone know if the BitFenix Nova Mesh mATX will accommodate a RX 6800? I've been looking at dimensions, and it appears that it'll be close. What about if it'll fit a 4090 if I eventually wanted to upgrade? I basically want a future-proof case, and it looks like that means extra space. Can the BitFenix meet that standard? If not, I'll looking at the NZXT H5. That opens up many other options.
You will want to check the dimensions of the card you are looking at and especially those of the 4090 you are considering. That thing is a beast.
Everytime I'm looking into something for a build this guy releases a video on that topic...thank you great content
Glad to help!
woah, cat in the back was brave stepping over those cpu and plaque lol
He's a little super cat lol
I've had my Phanteks Eclipse P400 for over 4 years and can't quite justify upgrading it. I often daydream of a complete new build, hence my viewership here rn. thanks for the video!
Nice! And I know the feeling, once you start building its hard to stop (:
Hi
Which case do you think.?
Phanteks g500a
Lian li lancool III
Thanks..
Both are good. I believe Jason's currently PC Case is the G500A if that helps. I know it was at one point but unsure if it still is.
Just note if you get the G500A it doesn't come with a Rear Fan so you'll need to get one.
Sorry I got to the party so late. Busy weekend, bunch of family from out of town here. Just got home from a baseball game. Great video, as usual... but I'm curious why you didn't mention Thermaltake's Tower series in any of them. The Tower 200 for 100 bucks feels like a steal. Comes with 2 140mm (non-RGB) fans included. I just put them in the back for exhaust and used other RGB fans up front for the aesthetic.
Sounds like a great weekend! Thermaltake makes good stuff but I'm not a big fan of their pricing so they didn't make the cut here. But great to hear that you've had a good experience with them!
Places like Australia and New Zealand, buying a PC case is hard and must consider the physical size, because many Matx cases wont fit a 3x fans GPU and we don't really have enough options for both PC cases and GPUs.
I just got the lian li 216 for $50, open box from microcenter! Amazing and well thought out case. You can tell they really used their brains when designing it. Pleasure to build in.
Nice!
But mini pc is so much smaller. Other than graphics, any reason to get a large PC? How much faster would it be?
There's no speed difference, that entirely depends on your GPU/CPU combo in your build. Mini itx is a lot harder to build in and you have to be much more careful about your part choices. I don't recommend mini itx builds to new builders personally, if you are looking for a small footprint but manageable build I'd go for the mATX options