Thanks for this Video, our Hisense is only 2 years old and didn't even have a lot of use but just started doing the same as your TV. The Samsung we had did the same LED Lights falling out thingee, we still have it, (60 inch) and I want to fix this too, (as cheaply as possible lol). I will try this hack with the Hisense first, because it beats taking the whole thing to bits like you have to for the Samsung to replace the LED light strips
Hi thanks this video was really helpful, i was able to fix my screen with your guideline leaving a few lines on it. I would like to ask, if I replaced the connecting cable, would it be a permanent fix? Do you think the fault is from the screen itself
Hi great video thanks. I have xbr55a8g that is the same with 4 ribbon to screen and when I disconnect either side I only get 4 red blinks but no image . If I disconnect 1 side only 4 blinks same on the other side. Any idea will be very helpful thanks again
thats is a oled screen that screen works deferent then the lcd, for the olded tvs it is very hard to tell. but you can check the 12volt and 24 volt tcon voltages,
@@kingcobraking3495 sorry not sure how to deal with oled double image. But you may check the voltages on tcon. Vgh vgl vdd vcc voff von. And watch the screen when it flickers check voltage and when it stops voltages. To see if you have any of these voltages not right. These voltages should be stable for the pixels to works right
@@SOSfixElectronics on the Samsung’s I have had the hot spots mainly on the right bottom corner even deformed the plastic bezel, and once about a third of the way up
Thanks bro..I just fix the flickering and horizontal line issue of my hisense TV...but how long it will work without any issues..using insulation tape will make any other issues in future or what..?
Thanks for this Video, our Hisense is only 2 years old and didn't even have a lot of use but just started doing the same as your TV. The Samsung we had did the same LED Lights falling out thingee, we still have it, (60 inch) and I want to fix this too, (as cheaply as possible lol). I will try this hack with the Hisense first, because it beats taking the whole thing to bits like you have to for the Samsung to replace the LED light strips
fixed my Hisense 6500 with this method. thank you man!!
Great to hear!
Good job brother its really work ❤
Thanks for the tips ! Work on my 43.
I put a little sticky peace of paper do you think it's risked for burn ?
Thanks 🙏
no its ok
@@SOSfixElectronics Ok thanks, this morning the led blinks 5 times and no image. I guess an another bug !
Hi thanks this video was really helpful, i was able to fix my screen with your guideline leaving a few lines on it.
I would like to ask, if I replaced the connecting cable, would it be a permanent fix? Do you think the fault is from the screen itself
not the cable it is a faulty screen
It works fine, but after 1 or 2 hours the error appears again (on a Hisense television)
I fixed mine this way but still has a few horizontal lines at the bottom. Can that be fixed?
It worked but it’s blurry.
Any solution for that ?
Sir my papakita po ako..need klng po malaman kng pwed pabang palitan itong lcd screen nya?..hisense tv din po ito..50" po
Hi great video thanks.
I have xbr55a8g that is the same with 4 ribbon to screen and when I disconnect either side I only get 4 red blinks but no image .
If I disconnect 1 side only 4 blinks same on the other side.
Any idea will be very helpful thanks again
thats is a oled screen that screen works deferent then the lcd, for the olded tvs it is very hard to tell. but you can check the 12volt and 24 volt tcon voltages,
@@SOSfixElectronics yes it is.
So if I have the proper voltage but imagine still flicker and double image, what would you recommend next?
@@kingcobraking3495 do you have double image or no image?
@@SOSfixElectronics double
@@kingcobraking3495 sorry not sure how to deal with oled double image. But you may check the voltages on tcon. Vgh vgl vdd vcc voff von. And watch the screen when it flickers check voltage and when it stops voltages. To see if you have any of these voltages not right. These voltages should be stable for the pixels to works right
Sir anu po ibang brand ng LCD ang pwede pamalit sa HISENSE
Half of my hisense 65" smart is blank.. can I split the screen easily?
check the lvds flex cables to the screen sometimes they cause that
How can I do this
How about white screen how to fix
check the screen voltages
@@SOSfixElectronics Model Hisense 55 inches A6H
My hisense TV 43* words are upside down but the picture is ok
check for the service menu
Mirror is set to 0 but the words are just upside. Down
AUO panels are really bad I hate them
Yes they have alot of issues is a weak lcd screen. Same as MU and NU samsung screens they got internal short
@@SOSfixElectronics on the Samsung’s I have had the hot spots mainly on the right bottom corner even deformed the plastic bezel, and once about a third of the way up
@@wisher21uk sound like a shorted power lines there
@@SOSfixElectronics well I never went any further with them once I see a blister in the glass no purchase for me lol
Thanks bro..I just fix the flickering and horizontal line issue of my hisense TV...but how long it will work without any issues..using insulation tape will make any other issues in future or what..?