HOW TO PLUG UP FMS REFLEX V2 PNP RC AIRPLANE STEP BY STEP INSTRUCTIONS EASY TO FOLLOW ALONG
HTML-код
- Опубликовано: 31 июл 2024
- FMS 1220mm RANGER PNP RC AIRPLANE IS USED IN THIS VIDEO ALL THE FMS RC AIRPLANES WITH A REFLEX WILL CONNECT THE SAME WITH YOUR RECEIVER
Хобби
Enjoying videos, I am getting back into rc airplanes after about 12 years. Getting some good tips and much needed info on the new technology. Thanks
thank you for this video, i just bought a reflex , and you made it easy to install,
Only man I've found so far to explain it this indepth
I just purchased FMS P-39 with Reflex. Thank you for this setup tutorial.
Good info on this site. Real talk.Real people.
Sean, Thank you for your service.
Thanks for the detailed setup for spektrum receivers. I have ELRS receivers (RM ER6 and HM EPW6), these are AETR just like the Reflex V2. Connection is more straightforward, pins 1>1, 2>2, ...5>5. I also use the same ELRS bind phrase on my transmitter and receivers so binding occurs as soon as I power up (no bind plugs). I only had to revers the Rudder channel on the xmtr (RM TX16s). Your videos are very helpful and well presented. Thank you.
Very useful video Sean, we’ll explained
Awesome! Thanks dude!
Another great video!
Thank you, great video.
Thanks for the valuable information.
Very much helpful. Thanks
Love your video and I would like to have a jet
Great video!! I have wondered how to set this up and how it works. I am looking to get one for a plane I am going to 3d print and want to try something other than SAFE. I am hoping your next video will be a flight test showing how well it all works in the air 😁
Thanks for the video
Very cool
That's a nice jet
Thanks that helped
Good video, This is a subject that a I have a lot on new and seasoned pilots ask me at the field. Where are you located at? Will you be at the South Eastern Model show in Perry Ga March 1st & 2nd? If you make it to the show, bring your cameras. The show will require its own video. There is also a night fly on Friday night.
Question, I want to use 2 channels for ailerons as I need to programme a mix to use flaps as flaperons as the model has a one piece trailing edge on each wing same as F16. The reflex as just one aileron port so how do I use the reflex in this example ? Thanks for your help.
Do I need to down load and update the reflex receiver if I buy for a FMS 980 size P-47 I have older plane?
very helpful video. Big Thanks!!!
What if your ailerons are on separate channels for flaperons? Great video thanks
Run 1 aileron through the stab and the other direct from your receiver. You only have the benefit of 1 side being stabilized but it generally works quite well.
I have a question and it has nothing to do with the reflex but look. I got my as3x/safe setup on a 3 switch. So I can flip the switch to the off position where its clean but my planes still will not let me do a full loop. I like my as3x cause it helps with take off from torque roll. Is there anyway in can have my as3x and full acrobatics. These are spectrum recievers by the way. And help would be greatly appreciated
If you can't loop then your flying in safe. The 637 receiver you have to go in the forward programming menu and tell the receiver what switch and what chanell you will use to turn off the safe
P.s. my eflite mustang with the 637t reciever, I only have as3x activated and it still won't let me do a loop. And I have an older safe reciever in my fms 1400mm warhawk safe and as3x nut it will not let me loop
Seems like you are not disabling the safe select.
👍 just wondered? where the ailerons reversed too ??? have a good one...
I dont know I was just repairing that plane for a friend. It is possible they weren't reversed . That my transmitter was reversed
What if you have 2 aileron and 2 elevators but don’t what to use a Y harness?
For the Ailerons at least I have been informed by folks that have some experience, it is possible to only run 1 aileron through the stabilizer and run the other direct from the receiver as normal. The amount of stabilization you will have will be halved but it will work if you must run separate ailerons because you want to set up flapperons or crow braking. Some stabilizers (eg HobbyEagle A3 Super 4) DO allow you to feed 2 separate ailerons (and Elevators) directly through the Stab unit thus having full stabilization and flapperons/crow braking.
wish you would show wing assembly and ailerons servo connection
I'll do that for you this weekend
Im trying to set up this reflex with a ar620 and a nx10 , ive folllowed instructions gettin noware :(
Hooked mine up with an old dx7s and a 620. Plugged it in just like he did. Ran reflex mode change to channel 5 and aux2 rotory switch
Hey bro, you left that one important step where do you connect the ESC?
It's connected to the reflex
how invert gyro correction magne toi
Where do you plug in the esc connector wire
I want to know that also he never gives that info
So is the reflex a reciever or not? I'm confused. I want to buy an inexpensive transmitter and reciever but I'm confused because I want to get an FMS 1700mm pa-18 Cub but i dont want to spend a fortune on the radios.
I recommend getting a fly sky transmitter with 10 channels and getting a flysky receiver with 10 or 6 channels. The reflex connects to the servos and then other wires connect it to your receiver.
Flysky fi-6x is a good choice for transmitter
No it's a flight controller. U have to get a separate receiver compatible with your transmitter