GSXR750 Motor Build sleeping1000cc killer
HTML-код
- Опубликовано: 7 ноя 2024
- Gsxr750 build that should have no problem taking on just about any bike with a stock
wheelbase 1000cc
132hp stock motor
152hp after build on E85 in the summer
we have more videos of gsxr750 builds coming
turbo, NA, nitro and NOS spray and gap sauce
enjoy from blackwidowdynos.com
How does the Ceramic coating add power or do anything? What’s the point of it
The 750's I have worked on in the mid to late 1990's made in the range 160-170 hp (@ sprocket) with head work and cams. (AMA,CMA superbikes)
60tq at 15krpm it’s possible but power band would be very narrow and running on methanol
It's nice to see that you are using an actuial valve seat cutter doing it properly instead of lapping
I am looking for some high performance pistons for my 2007 gsxr 750. Any recommendations. Very difficult to find. I did all the head work myself. I am good wrench and a machinist and set my head up almost identical to you.
Any pistons we use are custom ordered
@@blackwidowpowersports6037 from what I understand you cannot bore cylinders so i guess after honing and getting a nice cross hatch that is what I am left with. If I give my measurements could i purchase 4 pistons off you and what ever connecting rods you recommend. Even if you have 4 stock size pistons at your shop I will buy a new upper case; and start from scratch
@@mikemisurelli2324 yes we can it would be best to send in the motor so we get it all right
What did you set your cam timing too?
As close as I can get safely to the piston
How many motors have you built
@@blackwidowpowersports6037I've built a few. I am currently building 4 engines.
@@ADRRUSH do you have a Dyno or are you street tuning
@@blackwidowpowersports6037 my buddy has a dyno.
@@ADRRUSH test as many things you can and learn what they do there is no free lunch in this game and most of the information available is miss leading good work with your channel
Hi. Have you achieved this with standard camshafts?
Yes we also have a custom exhaust cam that helps
@@blackwidowpowersports6037 Amazing results. I'm currently building an engine for my crosskart. That has been ported, thinner headgasket. I have Kent cams here for it that have a bit more lift..But I'm thinking it might kill the torque, I am installing APE verniers as well
@@GarageNation353 the valves we use are the biggest part that matters how heavy is the kart
@@blackwidowpowersports6037 I think they are around 350kgs
@@blackwidowpowersports6037 Are you the same black widow that makes the black widow exhausts? Just purchased a manifold there
How much for this setup from parts to labor?
Call 2104808039
is this with stock 750 cams?
what cam lobe centers do you run?
i know that the k6 to k9 models have bigger cams in the 600 than the 750, is it with these models the same?
Yes it was with stock cams timed based on piston valve clearance we are building a new one with k6 cams and lightning crank should be ready for Texas Mile
@@blackwidowpowersports6037 intake as early as possible?? and exhaust??
trying to get 140hp+ with my 2005 gsxr750.
i have now 266degree 8mm lift EX cam from a k3 1000 and stock IN cam 287degrees 8.8mm lift.
have degreed them on 107IN 110EX.
i think i have to be earlier at the intake right?
How much does something like what you did to this 750 cost. I have a K8 and want it to give 1000's a fit.
@@drasticthompson1995 i dont know if you ask me or the other guy? but what i did with the cams you can kind of do the same thing to a k8 750, but you have to take the gsxr600 k6/k7 intake and exhaust cam from the junkyard or something and then buy a set APE cam sprockets to degee them for youre 750.
i think that IN105 EX109 is a very good cam timing. but you have to test it youre selve.
1000 cams doesnt fit in the 600/750 k6 and later models.
@@rkstuntz5278 I was the one asking how much it would cost for you to do that to my K8 750 motor.
Hello what brand of valve’s did u use
We use custom titanium valves made for us
How much to make a set ?
@@philipborland6989 $95 each valve x8
What would be pricing or email for info
Call or text 2104808039
Where are you located
San Antonio
Hi Blackwidow, hope you are well. I have a GSXR 750 k7, and I need to convert from 750cc to 1000cc, is it possible if you could advise what 1000cc engine would be suitable for the gsxr 750 frame?
Is it possible if we could video call on zoom or skype as i am from south Africa and need urgent help and advice
no
@@colbyclark2479 okay 🤷🏽♂️
engine
i have never seen anyone shift gears while doing a run
Enjoy the show
What’s your email or company website need this done to a 08 750
Blackwidowdynos.com
What’s your email I need this done to a 08 750
Blackwidowdyno@gmail.com