CHEAP 6S iFlight Nazgul5 - Brilliant!
HTML-код
- Опубликовано: 16 сен 2024
- Nazgul 4s 6s : bit.ly/30x1ZQE Coupon BGAndy15 limit :30
Gopro Mount: bit.ly/2HiSZXw
BG Now Sell Mount: bit.ly/30uvzGa
Star Lord: bit.ly/2XJo4Nm
GNB Lipo : bit.ly/2VzRGbJ
Tattu Lipo bit.ly/2Y3exkD
All BG coupons: bit.ly/2INFyjw
Nazgul 6s modded CLI bit.ly/2PpQWYr
Patreon:
/ andyrcchannel
Gear:
X9D Plus: bit.ly/2Yro81w
HDO: bit.ly/2CXaGdi
Rapidfire: bit.ly/2EiMYrJ
Menace Periscope: bit.ly/2NfHy8u
Menace pico: bit.ly/2sNGP1p
SMA Extender: bit.ly/2NczjKq
My 6s freestyle parts:
Straps bit.ly/2PamonR
Camera bit.ly/2DmYOlz
VTX bit.ly/2MxOH2H
Stack bit.ly/2QwgDFI
Frame bit.ly/2qNcj6A
Props bit.ly/2N6Tg4V
Motors bit.ly/2UR9nE0
Buzzer bit.ly/2SRGlSI
Bluetooth Module bit.ly/2rItoza
Mount: bit.ly/2GxehD4
Stunning value for money. I built my own 5" 6" and it was a bit over £200 in parts, although that bought Xing 2208 (not E) motors and an F7 stack (Diatone F722) with zero video noise. Oh, and an all important ViFly lost model buzzer! I'm going to recommend this to anybody who will listen!
Great review as usual Andy. I personally think 1750-1800kv is the sweet spot for 5” 6s for both racing and freestyle. But that’s just my opinion. I do find 1750 tho at least on my setups to be pretty efficient with 1800 just slightly less flight time in my testing. I mean the most I’ve seen was only a 17 second flight time difference. Now on a race rig for high level competition I’d say 1860kv is perfect. IMO. I will say I love the xing motors the 2208 1700’s I have are great just wish I would’ve gone with the 1800 on those. The xing 2207 1800’s I love on the one race rig I have them on. The twin to that rig has some xilo 2207 1750’s and the xing’s are definitely faster. My lap times on the xing rig are anywhere from half a sec to 4 seconds faster. Same frame props, and internals just diff motors. 👍 keep up the great videos mate.
Just got my 6s Nazgul5, the cap is now 50v, 470uf! Seems someone listened, good work, great review as always
Hi Andy! Thanks for another great review :) I just purchase one and updated the BF to 4.2.4 - Got you have an updated PID tune for that?
I noticed there the Rx antenna straws had little nicks in them as the props are really really close that when they flex up a few mill, they catch the straws. Eventually the one got chopped when I punched out for a LOS hover. I’m surprised it hasn’t been mentioned before. Has no one else had this issue and if so, then where to mount the antennas?
I just ordered the 4S and know nothing about drones. I thought I could just install a battery, bind and fly. I didn't realize there were so many settings to change. I predict mine will never fly. :-(
no no..you watch a video or two...its not as bad as it seems..and once you get in the air its all worth it :)
I recommend to first buy a cheap drone and just understand how a drone works and if you like it after that you could upgrade to a more serious drone
@@dailydoseofsmoke.6717 too late lol
do the settings work for the 4s model as well?
do you reccomend 4s or 6s? what's the flight time like for each? speed? thanks so much. This will probably be my first fpv quad, as I've had it with DJI
Your reviews really are a cut above the rest. (I think I've watched pretty much every review for this quad) So much detail and information, no other reviewer comes close. I might of bought this quad as it looks immense for the price, however I have recently built a very similar specced Source one. So close it's scary. I did steal your PIDs and for the record it flys so much better than it did with stock settings. 👍
thanks for the feedback. Cheers
Very nice review!
The iFlight board looks like it has TWO dedicated jst plugs, front and back of the board labled for 5v, gnd and LED, so could add led’s to each, or add a buzzer to either.
Thanks Andy!
Fantastic flying and review, Andy! 😃
I'm really thinking about getting those motors! But for 4s batteries, of course. 😊
And, again... Happy birthday! 😃
And don't worry about aging, I'm already 41. 😬
haha thanks MC. yes not far behind you
Great quad! Have you tried it on 4s? I can't decide which one to order 6s or 4s version, so far i have only 4s batteries so will fly on 4s, but i want to have possibility to try 6s.
Get the 6s. I fly 4s batteries on my 6s all the time. Eventually you'll want 6s drivetrain
@@wolffpv535 thanks!
Question for every model going forward forever. Will it fit a DJI FPV module?
the dji module will fit in most things but for me its all about getting the props out of shot and u would get them in shot here
Yes
No
I only fly with hero 5 black takes a hit really well 👍👍 definitely need crash glass protection ✌
yeah I got that one also. will be using it as a back up.
Great review! I love Iflight frames. They've been my go to frame choice for about 6 months now. I've got the IH3 and the HL5. Both frames are my go to's for favourite 3 & 5 inch. Really nice carbon and the quality is what i'd say a premium product😊. I love there stacks too. I'm slowly replacing my old hglrc stacks out for the succeX ones. Waiting for a 20mm f7 twin gyro stack to come through, pretty awesome stuff. Exactly the same as the geprc stack but a little cheaper if you buy it direct from Iflight.
Thanks for the review. What questions should I be asking myself to decide between the current v2 version in 4S vs 6S? I'm assuming the tune is different and know the motors are different so it's not like I can just put 4S on the 6S model and have it fly like the 4S using the recommended 4S.
Yet again a very nice review Andy!
Do you think you ll ever make a tune video? I would like to see how you tackle this 😊
Ordered a 4S through your link and the coupon. Thank you for the review and the coupon! Is the only difference between the 4S and the 6S the motors and tune? Thinking of moving into 6S but the budget did not allow buying all new 1500mah 6S batteries to last a flight day. Darn they are expansive still.
Thanks for the review ! You make me bought the Star-lord 4 months ago, It's my freestyle main quad...and now I wanna buy this one too ^^ But Im not ready for 6S lipos, Im gonna stick with 4s, and taking this nazgul5 in 4s version. I hope it is nice tune too. Do you know if switching props-out to props-in will affect the behaviour and need to change PID ? Thanks !
My pids are for the 6s version only. Id say that the 4s version would need a different tune. In not noticed a difference between props in or out myself
@@AndyRCchannel thanks! Im gonna go props out for my quad, tired to clean the lense! 🙃
Great review...I dont own this yet, but greatly appreciate when you include your tunes!! Your diatone 369 tune worked well to :^)
@AndyRc please tell me what differences to expect in functionality between the 6s & the 4s ? I watched a review on the 4s and it was outstanding as well... super punch, awesome recovery and no shutter in tight turns... Appreciate any constructive feedback..thanks
Nice Quad. Some of those tree dives were worth of a "Code Brown" moment ... I wouldn't have the nerve. Thanks for sharing. Cheers!
thanks yeah I should start showing when they go wrong to make you feel better haha. put it this way iv fallen out of those trees a lot and hurt myself... worth it haha. sometimes its just not possible depending on the wind direction as you fall it pushes you into them and that when you break an arm getting it back... not the quads arm either haha
Great review! If I want to have a less noisy “social” quad, is it enough to change the props or do I need to take the 4s? Maybe both?
I'm looking forward to see your mods/ tweaks on that quad :)
Hi, Andy..i say it bevore..i wish i know only 5% from what u know about this nice hobby..i dont understand much, but listen to your knowligh give smile on my face..love it, also to buy this nice quadcopter..(im a beginner, aldo i like the 6S, still i buy the 4S i think..thanx for your amazing revieuws/video's..have a nice day & flights..enjoy
Great. Thinking about pre ordering. No death 💀 threats from me 🤓
Please help !!! I bought this nazgul5 6s my copter won't lift off do u need to switch my engine to unreversed or wuts going onnnnn !!! I'm like 1000$ down the drain so far
Are your props on the correct motors?
Hey, can you tell me, the best lipo weight for the nazgul 5?
Dont mess with the Spektrum Guys like me .... Just kiddin... Spektrum Guys use a spm4650 like i do. its a bit struggle to get it run because of srxl2 but it is worth the work. This receiver works great.. I was getting failsaves with the 4649 but not yet any with the 4650. i was able to fly around a building with it in the Phantom toothpick. 4650 great receiver:)
Hi, Andy..i forgot to ask..becouse i am a beginner in this hobby..i like to buy the 6S .. but its better to start with the 4S i think..or is it not much diferend ? What do you think..thank in advance ..
thank You for that settings and PIDs, bless ya man!
Wow, I was literally JUST looking at this.
its good! and good to see you back!
@@AndyRCchannel Just ordered one :D I'm not a super aggressive pilot and I prefer to cruise. So I think 1500 mah would be good balance between weight and agility. Considering also 1800 but I think it might be too much. What you reckon best choice would be for a person that likes to cruise and doesn't do anything crazy? What flight times i can expect from 1300/1500/1800 ? It's my first 5' drone as any advice would be priceless :)
@@_Furey_ He never awnsers.. Dont even bother
Hi HumbleHeartMinistry, I am a newbie in fpv drone and got the 4S Nazgul5 w frsky r-xsr receiver. When I power with battery, there is a blue blinking light. I've set up my frsky qx7 transmitter model to bind but still blue blinking light. Can any kind soul enlight me how to bind the drone here?
Great review Andy, I'm bummed, I needed a 6s fs rig so the 6s batteries I bought for that crap wizard hv didn't go to waste and couldn't find a descent rtf so I built one, it cost $150 more than this one to build, and you've got this flying better than mine(i'm a crap tuner) now I wish I would have waited!
Dont be hard on yourself. Buy what you want to fly now or you will be waiting for ever. Maybe your build has better components if it cost more and just needs a good tune. Try the betaflight 4 stocks they are designed for this kind of model
... nazgouls are those dragon-like creatures, used as scouts/hunter in the search for the halflings - I think :-) ...
they heard you Andy :) my 6s version came with a 50v 470uf.
Hi great video!! I have a flysky x6b receiver, and its pretty big as a receiver. Do you think it will fit in the back part of the drone (under the capacitor) ? Id be very grateful if you could measure the space between the two standoffs in the back. Thanks for your time
Which ones better the 4s or 6s?
I have a 4s 5" build already but want a backup quad.. But also want to try 6s.. This quad looks perfect in both versions especially for the same price.. Is there any downside to the 6s over the 4?
6s for me
Can you add another capacitor on the battery lead to help with noise?
I am a newb and I have a 6S Nazgul. Where can I find a PID tune I can use for my Nazgul since I have never tuned and would like to fly a rig that has been tuned by someone who knows what they are doing ??? Sweet videos Andy !
they sell the mount on banggood now :)
Nicely engineered copter Andy, I can see why you love it...Shame about the GoPro being underexposed again, is this why the call it the Black Edition...lol..?...Their firmware engineers need to come live in Britain, instead of constant sunshine.
you know i think the session 5 did better in those conditions.. shame none of mine turn on and people have even stopped making mounts for them now just like this case.
Hey Andy! You don't have any trouble with the Skystars aluminum motor shafts? I had 2 break off as I was trying to take a prop off, and you really can't tighten then too much because they snap off.
not at all in fact this quad has taken the most beating i have ever done with a quad and no problems. maybe too heavy handed? dont think iv ever had a motor shaft snap on me
@@AndyRCchannelI don't think I did it, the 1st 2 snapped off taking them off, the 3rd i was very careful checking to see when the prop was tight enough to stop spinning. I don't know that yours are aluminum, mine is the GL730 with 2306/1700kv Skystars motors. After mine broke I talked to several people that had the same issue, so it could have just been those motors.
Awesome review Andy!! Would you recommend the 4s or 6s version? I'm sort of an intermediate freestyle pilot. Thanks for your input... Cheers Jake
id go 6s for future proof. People say 4s lipos are cheaper but thats only because cheap brands make 4s lipos and its only the high end brands making 6s lipos at the moment but if you take tha tattu rline 4s lipos and compare the equivilent 6s the prices are the same. So if you want to cheap out on lipos go for the 4s but i think the future is 6s
@@AndyRCchannel I thought about what you said comparing 4s and 6s and it makes a LOT of sense. 6s lipo's are becoming chea
per and more common. I've only flown 4s on the X220hv so far and really feel the need to upgrade. Hence thinking the Nazgul 6s would be a perfect upgrade. Cheers Andy!
Hi Andy, for long range purposes will this 6s version get longer fight time if I use 4s li-ion battery on the 6s version, since the kv of 6s version is lower than the 4s version
Hello Andy. I didn’t see a crossfire receiver option. But in the pictures it shows the crossfire tpu on it. Will it come with tpu even if we can only get a frsky receiver?
Very good review ! I also have the Nazgul ! and i have the dark lines too... ! this is a vtx cheap sensitive to the noise .....
I will change it
Spoiler Alert!
Andy Spoiler-Alert! RC drops another great review :-).
so, youre saying, it propwashes exactly the way a brick doesnt?
Hey Andy. . Firstly thank you for your videos. They are awesome.
I was wanting to ask. . I have have recently purchased a nazgul5 . I've set my x9d plus and set my switches on beta flight. . My beeper works but it won't arm. Any suggestions ?
Sounds great! I would like one . So hey the gopro footage seems to shift slowly in light conditions is that a setting issue or hardware issue. I am currently in the market for an upgrade for a dead session myself! I fear the run-cam and foreseer products are cheap feeling in comparison to a gopro. As well as lower performing.
its a uk weather issue, go pro should come to the uk to calibrate their dynamics lol
@@AndyRCchannel Thank you for taking the time to reply. I truly appreciate your judgment and opinions. Than you for all your work!
The 2019 star lord runs up to 5s and has a Flysky receiver which I’m using after my Batman was stolen and I need a replacement. For freestyle and cinematic flying if you had to use only one forever would the nazgal or the star lord make you happier ?
Hi Andy I have just bought the iflight cidora sl5-e which is virtually identical to the nazgul 5 when I arm the quad with air mode permanently enabled when i throttle up Motors spin and when I lower the throttle they don't stop they get faster and it wants to fly too the moon I turn air mode off it's ok but I get the drop out on acro I want air mode on permanently how do I fix this please??
Hai Andy... i have my micro drone already, but after this im looking for 5inch freestyle quad, I have 4, 5inch on my top list as this Iflight Nazgul 6s version, HGLRC Sector5 V2, Skystar Star lord 228 and,or Skystar ST225. which one was the best one out of this 4, five inch freestyle version?? and btw now you have 2 of Starlord 228 model now.. there something special there.. #chearss
hey man thanks for the vid. I have a big question, do you know how well does it handle windy environments?
I do hiking and sometimes at the top of mountains it is very windy, or is better to avoid to use it in those circumstances? Thanks
From personal experience, all quads handle the wind just fine ... it is up to the pilot to ensure they take it into account when flying close to objects.
I got the Nagul 5 4s and it won`t bind. I am using the Jumper T8SG V2 Plus Transmitter and it has the FrSky R-XSR Receiver. I have tried all the protocols ( Frsky, Frsky-V8, Frsky X) that are in the Jumper and none work. I hooked it up to BetFlight and in Configuration in Serial Receiver Provider it says, S-BUS in the
Receiver Mode it says, Serial based Receiver. I then tried to bind with Jumper set to SBus in protocols and nothing! It is going into bind mode when i press button and plug in battery? And it came with no manual. I would be very thankful for any help you could offer! Thank You!
hey Andy, please change your Gopro metering setting to spot metering, you'll have better exposure :)
sorry if this is a dumb question...But what are the main differences between 4s and 6s?
hello andy, i buyed this nazghul 6s..now i need to buy the lipo´s..what do you advice me to buy, tattu or gnb lipo´s ? hope u advice me..thank in advance..good day
Nice review. Problem with products like this and BG. Delivery date getting later later later, was 5 sep now it is 16sep and tomorrow ...
That's usually because when the reviews hit a lot of people buy them and they run out of stock so u have to be quick. Cheers
I don't know if i should get the 4s or 6s vesion i have only used a 2" and a simulator.
And Is the nazgul compatible with spectrum receivers ? Thx
i love the look of this mate! great review!! BUT the flight time is low for me! as im a beginner i like to have longer battery life over power really, whats the best battery on 6s version for longer flight? thanks bro
The flight time is due to how I'm flying it. If you are expecting any model flown like this to even get over 3 mins you are misinformed. It would fly for 7 mins at beginner pace.. but not a beginner model
AndyRC thanks Andy!! I think I’ll go with the 4s version then as that would suit me better as it’s not such a beast!!
I currently have a cygnet 2 so the 4s version of this would be a nice upgrade you think? 🤗
Hopefully you'll be going somewhere this weekend where you can get some decent footage with it. ;)
tried your tune it rips thanks
Awesome video, And can I please get some help. In Betaflight 10.6.0, when i connect to my Nasgul5, in the PID Tuning page i don't get "D Min" or "PID controller settings" showing up. All I get is "basic acro" and "Angle/Horizon". Please help!
They should get this one with the DJI system then it'll be awesome
What is the flight time with one of these when going with a appropriate battery ?
Iflight make excellent products for good prices. Nice review Andy 👍👍👍👍👍
I have just bought the 4s version. Which battery fits better with it? 1.500 4s 100c or 1.800 4s 100c?
hi i was just wondering if you can help me i am looking at getting the 6s version and it says SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC does this mean i can use 4s aswell and if so do i need to change anything on betaflight? hope you can help thanks love the videos
Nice video... But are you also going to review the 4s version?
I dont think so. its the same components with the motors swapped for the higher KV. so they will be the same except the lipo will sag more on the 4s
Heheheh ... "you are not going to need an Andy filter" ... heheh
hi ! andy ! Where is the r9mm receiver soldered ,,,,,, this fc? im Order without receiver
Change the vtx !! This is not a capacitor problem.
You will not have any problem.
which to buy, 4S or 6S?
6s
Hello andy, will this tune work with a 4s nazgul?
andy being i cannot order from bangood ,, im building a xl5 v4 ,, have you used the iflight f4 twinG fc?? received one as a gift
Cool video bro! I may buy this, if I do, I will be sure to use your link
Hello Andy. Was wondering if your interested in a bit of paid consulting with me and my Nazgul5? Having some questions / issues with Betaflight configuration.
Can this model do a long range with that vtx?if not can we install an tbs unify pro hv?
Will the 6s version fly well on 4s until I get new 6s batteries?
Does 4s last longer than 6s? 3min is horrible seeing as my tyro 79 gets 6:30 +
Hey Andy it seems all
Your coupon codes aren’t working? Looking for a nice one for the nazgul5 4s
Can j use this drone in freestyle? Is it going to check? Btw nice film :)
nice review. will a dji air unit fit behind the stack, if you remove the rear middle posts?
nm. just saw this question asked a few posts down. but with the capacitor in the rear of the FC, that might be in the way so it might not fit the way I'd like it.
@@edpaguia8504 id say yes with ESCs on the arms but with the longer arms you will get the props in shot. dont worry there will be a flurry of frames coming for that system iflight have one themselves already
@@AndyRCchannel thanks andyrc! i actually found this frame by iflight dc5 222mm that's made for the dji unit. I think I'm going to buy this Nazgul and throw it in the iflight dc5 222mmm frame. Hopefully the tune isn't too far off. btw - The iflight dc5 222mm has props not in view of camera, if you're looking for that type of dji frame :)
Interesting to compare your review and kababfpv's. He judged it as if it was a lightweight or race design.
700 grams a lightweight race design? I think his laughing gas must have a leak
what a beast thanx for the review!!
Hello, will your's CLI work with 4S version too?
all other reviewers should calibrate their ass on an andy rc review. ps. just ordered the xing e 2750kv's
nice enjoy. thats gonna scream even more haha
Which one is better... the 4s version or the 6s?
video lighting and detail on the bench was spot on
What does it weight with battery attached?
i love your pids, thankyou!!
Do i have to buy a receiver for this or does it come with one?
#AndyRC i cant figure out how to unlock my vtx to change power???
Would this fly good on 4s???? Until I get 6s in the future
Is it worth it, to change the capacitor?
Hi guys!!
Can someone tell me how to bind the nazgul with taranis?
Thanks everyone!
How is it compared to the tyro?
Hi AndyRC, I have successfully bind my qx7 to my nazgul 6s, in fact if i put battery and play with arm, switch, throttle, roll, pitch, the quad responds. but in betaflight my receiver is not detected. how can i fix this? please help thank you!
Move the transmitter away from the quad when connected to the computer sounds like the telemetry is swamping it out
Move the transmitter away from the quad when connected to the computer sounds like the telemetry is swamping it out
@@AndyRCchannel tried this already but still doesn't work. also rssi on info in setup tab is always on 50% if it helps.
@@AndyRCchannel my bad. should have plugged in also the battery. 😊
I'm getting a lot of prop wash using the modded CLI, anyone having this problem? Pls help not to familiar with rate setting/filtering
If you arnt using the same version of betaflight using the same battery with a GoPro then you will
@@AndyRCchannel I also noticed that my gyro was off, so that my fix the issue