Aftermarket Industries On Fuel Pump Setups, Walbro Fuel Pump Failures, and Single Vs Dual Fuel Pumps
HTML-код
- Опубликовано: 9 май 2024
- In todays episode we sit with Julian from Aftermarket Industries to discuss having the correct fuel pump setup in your car, Walbro fuel pump failures and if it's better to run a single or duel fuel pump setup. We also cover what other supporting fuel mods you should have in your car to run E85 and much more. Have your pen and pad ready for this one as we unpack everything you need to know about fuel from the Fuel Doctor himself Julian.
Aftermarket Industries Official Instagram: / aftermarketindustries
Aftermarket Industries Website: aftermarketindustries.com.au/
Aftermarket Industries Fuel System Calculator: aftermarketindustries.com.au/...
FOLLOW STREET ALPHA PODCAST ON:
INSTAGRAM | / streetalphapodcast
TIKTOK | / streetalphapodcast
SPONSORS:
MINTY DETAILING: / mintydetailing 
Авто/Мото
I don't watch your channel at all, not a single video. Until this one. Keep the BS trash talk away. We NEED technical, informative, useful information. NOT trash. Keep posting interviews like these and I might become a fan. Hats off to our Aussie brothers taking things to a whole new level of technicality and R&D than most do here in the States.
❤.. thank you boss.. Tukes is doing an amazing job and no doubt it will keep growing... thanks for watching...
best guest you’ve had. only knowledgeable one. actually teaching people with your channel instead of just coming on to talk shit, spread false information, or get an ego boost. i hope there are more guests, engineers, and business owners in the future.
I truly appreciate this video also.
🤝
Must be new then
@@David-kl7to i’ve actually almost watched every vid. you know knowledge when you hear it after being in the car industry this long.
@@KiingTx yes you do which is why i guessed you to be new, first real knowledgeable guest was alex from lund
refreshing to see someone who knows what they’re talking about
He’s had quite a few knowledgeable guests.
Yeah he ain’t really saying nothing out of this world. Brake specific fuel consumption, calculating fuel systems, liters per hour based on engine size, amperage, yada yada 😅 duty cycle. This is plain English. Plenty of old books on this stuff & built in calculators on every fuel injector & fuel pump manufacturers website
@@TheLlamasThrust he’s just speaking his brand and dropping the importance of a system that isn’t properly done right often.
@@TheLlamasThrust the purpose of this was to have a general high level discussion about fuel systems that the general public could understand and not just fluid dynamic engineers.. thanks for watching though.. If this was general knowledge as you say so many projects wouldn't be plagued by fueling issues... and there's more than just calcultors at play when designing a fuel system for a motorsport application.
@@AftermarketInd & that you did achieve, No doubt about that. 👍🏽
Technical podcasts ftw. Good change vs dudes coming on just to talk their ish 😂
Very very informative. Many people don’t go too detail into things like fuel that matters a lot. We appreciate him sharing his knowledge.
Love hearing a person who knows what he's talking about versus having people on here to hype their shop or troll on their biases.
Update on the brushless fuel pump = we are releasing our own controller later this year for the E5LM rated to 1400 litres per hour @ 22A
You were giving out decent info until you started talking bout injectors. ALL injectors have stainless steel internals, ID just used the terminology to market their injectors as “ethanol compatible” now everyone thinks that’s what sets them apart. The irony in you talking about echo chamber and mentioning surface level info like that is peak internet.
@@Wasdfg603he did say he believes, not he was 100% sure on injectors, you could correct him and not make it seem like he tried to spread misinformation on purpose lol
At 13.5v 7.5A 40psi the BKS1001 runs 550lph~. So the controller ups the pump's watt draw up to 3x when certain criteria are met? Will it be MAP/Throttle based? How fast does it make adjustments? Please don't tell me the controller alone is $2.5k 🥲
yall would do well in Texas
@@Wasdfg603 @Wasdfg603 actually there is no "their" - all ID injectors are Bosch Motorsport developed injectors: ID simply have the rights over some of the injectors such as the 2600cc. We have a direct relationship with Bosch Motorsport & its Bosch who provides fuel compatibility guidelines/guidance. So what sets IDs apart is Bosch Motorsport - just a small company formed in 1902 (i think)... no echo chamber here... simply relating facts provided by the OEM.. and I did make it clear we DONT manufacture injectors.. but thanks for the critical analysis.
This wealth of knowledge is crazy every episode my brain downloads so much
We need more guests like this
Not trying to start beef but this podcast is worlds apart from gohard podcast, keep up the great work tukes
Another banger Tukes! Keep em coming bro. Them Aussies are dedicated lol, trying to have fun with their government isn't easy.
Finally someone telling the facts about actual Tuning and how to build a car properly.
Most cats driving fast time bombs!!
You can't just up amp on a fuse to fuel system.... You feeding more current through that wire harness! That heat goes somewhere!
🤝
Japan & Australian companies always been top notch, & it's because of people behind their companies like this guy. I've have had a few issues with American companies more common than I would like. I hope they take a thing or two from this vid because that Australian shipping cost & wait time is odeee lol
Shortly we will be offering FREE shipping on ALL packages
CAPRICE GANG AND HOLDEN GANG TAP IN 💪🏽
Chevy SS here 💪🏽😤😤
What a mad video , learning heaps , this guy has knowledge , you need to go get more people like this on the podcast 👌
Holy shit im learning today. Thank you for this.
As a 19yr old this channel has taught me so much
We love to see it. Always looking forward to new drops. Keep it rockin'
Favorite episode to date, this podcast keeps getting better.
Excellent episode! Crazy how an informative videos doesn't get a lot of views. Smh.
What a 💎 of knowledge
Fastest growing Podcast🤟
Thank you! 🙏
Formulas flying over my head like I'm in school is crazy 😂😂
We need more technical people! This was a good one.
Finally someone worth watching again
Great info and keep bringing people to drop knowledge
I learned a bit on fueling thanks to buddy. I’m a novice tuner, well tuning for 1.5yr now and I stay learning. This opened a whole new chapter for me. Thanks ABP
Great video. Would love a tech video on how to properly match torque converter, wheel size, and rear end gearing.
Thanks Tukes, Enjoying the guests interviewed on this Podcast ❤
Excited about the mustang one 👀
For people to say the “only knowledgeable one” is super false. So many guests were knowledgeable in the lane that they were in. He just does it at a higher level. The beef riding is insane !
100% I learnt so much watching other guests.. domain expertise is key...
This Guy really knows his stuff
Loved this one!
Great episode cheers!
Just called asking about fuel pumps was met with a lovely lady 10/10 experience great company
Please e try and get more interviews like this one 💪🏿💪🏿🙏🏿🙏🏿🙏🏿
Great video will informative
Great podcast. More tech stuff like this please 👍
More to come!
Great interview
Interesting, , Subaru gang checking in.. We're quite aware of Australia. Turbos mart and DBA Are among the best
dang this is sooooo good!
I don't know jack shirt about all these drag and roll GTR's, R8 etc. Which I ❤ but like this Aussie Genius👌 I somehow knew how important the fuel systems were👍 besides jus BIG AZZ 1K+ HP MONSTERS👌 Awesome interview brutha💪❤💯💯💯💯💯💯💯💯💯💯💯💯
Thank you sir.. means a lot. 🤝
@@AftermarketInd Thank You! Everything you shared was awesome💪
@@constantineandreu9377I'm humbled by the response.. truly.. I'll be back on with Tukes to go through his Supra build..
@@AftermarketInd I'm surprised your not a sought after tuner considering the level you've taken a subject rarely taken into consideration! Appreciate you enforcing a critical necessity in all builds in which I personally believed was of the utmost importance.....besides the usual turbo and 1K+ HP dragy nonsense😂😂😂😂😂😂😂😂😂😂😂😂😂😂 Have you done complete upgraded fuel systems for the GTR35 platform?
@@constantineandreu9377 haha I leave the tuning to the expers... my job is to give them enough fuel...😄
R35 is due at some point later this year or early 2025
Noted on turning down my fuel pressure. Oem fuel pressure for my acura is 58 psi. I set my regulator at that same pressure. But now with 20psi of boost, my final pressure be at 78. My injectors are loving it but my pump (hell at 525) be drawing a bunch of amperage. Thought about lowering it but idk how that'll affect atomization specially with my big 1300cc injectors while cruising
It's Mad Max out there.. Fuel is everything... LOL
More of these
People that are ignorant will ignore this video
#FUELTECH NEXT PLEASE
Nice!!
Street alpha ftw!
🙌🙏
Notice how he didn’t say ford when talking about issues, coyotes the king baby!
I need one for my evo8
57:49 we also use Bosch Motorsport injectors, and it is problem with every injector.. if you have engine with 300-500cc cylinder volume, and you run 800-1500cc injector per cylinder, you cant run at Lambda 1 at idle and pass emission test (Co2 and NOx) which are quite strict in most of the Europe for street cars. Most injectors has minimum Pulse width where they are linear, and after that, they are around 15-40% off, and that off percentage cant be characterized, its just this 10sec +30% in flow, and other 20sec -38% in flow, lets say at 1,20ms PW
definitely a big market for the MKV Supra which I assume would also work with the G42 and the M340i with a slightly bigger tank than the others. The B58 Gen 2 fuel system is probably also similar to the S58 cars m3/m4 with both engines running at 300bar
We are doing a full feature with SAP about the MK5 system...stay tuned.. I will be back in NYC at the shop I June to build and design the master hose kit and wiring harness 😇
Do u guys have any solutions for boosted c5 corvette ...currently losing fuel pressure once fuel heats up using single 340lph ??? Help
Soon
850 horsepower fueling : 🔫
3000 horsepower Fueling : Yes
i wanna see bader built on here
25:10 YES YES YES YES YES YES. God, when will people learn this...brushless and a rear tank is the way to go on the street - even well beyond 1200hp these days.
Yes - 100%.
Shout out to Rippa for doing everything they can to beat a 3.8 Whipple truck , bolt on power baby
I love when a tech actually comes on not some loud mouth talking shit about the next man 😂
Im just gonna start over mynbuild 😂😂😂
😂😂
@StreetAlphaPodcast forreal, I need to go over kill over fuel, that way I dnt gotta worry about any upgrade changes when I go retune
This is what I want to see. Not shit talking wannabe clowns.
They should do a plug and play for m340i 🔥🔥
BMW kits coming soon..
@@AftermarketInd 🔥🔥🔥🔥 yall different level 📈📈
@@kevinakagohanhaha thank you sir
PLEASE make a plug and play for Coyote powered Ford F150's! The #1 performance truck platform! We need surge protection! 🙂
We are looking at that for 2025 100%
@@AftermarketIndThat's what I like to hear! I have a 2024 truck so 2025 is probably when the ECU will be unlocked for tuning. Now I just hope the fuel tanks are the same from 2018+ or at least 2021+.
over engineered products are the best and well worth the money.
40:24 ratio conversation
Yessir I’m early
Corvette?
restock the merch dh
In short what he is saying in the beginning of this video.. when you engineer something and its takes say 800x you then rate it and sell it for 400x..
Prime example is why you can buy a 400ho car and make 800ho before failures. Cause properly engineered items are under rated but still priced the same
As fully rated things..
In construction this is very important from a legal side of things.. if you build something rare it at rating and it fails just under that rating as just a single bad product that only achieved 99.9% of the rated thing.. major lawsuits come in. Everything in construction has at least a 40% greater then rated window.
Automotive isn’t any different..
Get feras qartoumy
Bro you soooo need to sit down with demonology
If you know the car in the background then you know….
🤝
😂 600hp guys not spending $3000 usd for fuel.
Injectors $1.4k (Corn Compatible)
Fuel Return $1.1k
Flex Fuel Sensor $400
There isn't even a pump or surge tank yet.
Don't be me, buy a Mustang Instead.
- 370Z owner
lol, flex sensors are cheap. your getting scammed
Flex fuel sensor for $400…? 😂 damn where they do that
The guest; speaking down on Americans and our seemingly perceived baseline for technical knowledge, or lack thereof.
The host; oblivious.
Lol... ok Bobby.. we all have strengths and weaknesses as I mentioned... American chassis development > Australia. I could name many strengths and weaknesses for BOTH. But thanks for trying to make this something it's not. I'm a New Yorker now..😂
I don't think he was talking down on "Americans". I think he was pointing out that the conditions in the automotive world in Australia, effectively force companies to over engineer their products because the consumers (racers/enthusiasts) demand it! Going so far as to get violent if a product is found to be subpar. I would agree with him. There are far too many crap products being peddled to consumers here in America. Whether they be under engineered or produced places overseas with poor quality control. Imagine a marketplace where there are fewer choices but the choices you have are all top quality. Sign me up.
@@BilletGarage 🤝👊 spot on... thank you.
@@AftermarketInd just like in the video, I think it went over your head.
@@blikkybobby 👍keep up the great work. Thanks for taking the time to watch the video
this guy is great...but people need to stop selling their shit on using "mil spec" anything. its a meaningless term.
Definitely not a meaningless term: we operate in very harsh and high current demand conditions that demand minimum requirements...
Bruh so you think your better then deatschwerks and the other company idk bud bild claim
Would be cool to see an interview with Bill Brockbank @ Badger5 - from UK. Maybe when he comes over to US.
Nothing but gems here 🫡
🙋 SOMEBODY TELL HIM TO INTERVIEW #FUELTECH BRAZIL 🫡🏁 GET FAMILIAR WITH ALL THIER TUNER ECUs 🙏 AND THE C8 THEY MADE THAT DOES WHEELIES