Updated Marlin firmware setup guide - VS Code and Auto Build Marlin
HTML-код
- Опубликовано: 16 июл 2024
- Unfortunately, things change after I release a video. The process for updating Marlin has evolved and so have the software tools required. In this video, I cover step by step how to setup Visual Studio Code and the Auto Build Marlin extension.
The good news is the process is easier than ever. Thanks to the Marlin devs for continually improving their FREE firmware and making our lives easier.
0:00 Introduction
Mac image credit: www.needpix.com/photo/281164/...
1:34 Drivers
TH3D driver page 1: support.th3dstudio.com/hc/en-...
TH3D driver page 2: support.th3dstudio.com/hc/en-...
2:29 Installing Visual Studio Code
VS code download: code.visualstudio.com/download
3:41 Platformio extension
4:22 Auto build Marlin extension
4:45 Downloading Marlin firmware
Marlin GitHub: github.com/MarlinFirmware/Mar...
5:27 Compiling Marlin
7:34 Using premade firmware configs plus custom changes
10:07 Updating firmware for 8 bit and 32 bit boards
Previous bootloader video: • Bootloaders and EEPROM...
Previous bootloader for an Ender 3 video: • Ender 3: How to instal...
12:05 Installing Pronterface for troubleshooting
Pronterface download: www.pronterface.com/
As the video says, if you use Octoprint, the terminal works the same way.
M115 Marlin reference: marlinfw.org/docs/gcode/M115....
M503 Marlin reference: marlinfw.org/docs/gcode/M503....
Conclusion
TH3D Unified firmware: support.th3dstudio.com/hc/en-...
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: / teachingtech
Thanks Michael- -that was an awesome amount of information. Hard to see how anyone without a tech background would ever work that all out.You did a good job of keeping the info accessible
You are very good at creating tutorials. There have been others where I could not figure out how they got from one step to the next. I appreciate all the hard work that went into this!
Completely agree more, haven't used my printer in a few years and had to update from 1.1... creator made the process super easy to learn the new VS method.
Thanks for the straight forward walk through. This makes building very simple even I managed to do it. Thanks to the marlin team as well for the add in!
thank you so much for making these videos. I don't think you realise how much you do for the community. Keep rocking!
Thanks for putting ALL this stuff together! Your tutorials are really incredible!
Thank you so much Michael.. this has helped me multiple times now after upgrading my S5 and one of my Ender 3s.
Your instructions are always so clear and easy to follow.
Michael that was a great, great video - I was flailing by myself and went step by step with your video and it went perfectly. Thanks a lot!
I have been trying to upgrade my Anet6 firmware - V1.7 board very long time without success. Thanks to your amazing guide I was able to finished it. I got my LCD display back . I have watched couple of your other videos, they are very informative and easy to understand even for beginners like me. Thank you very much.
Excellent video Michael! Got everything working great for my Ender 3 Pro with the BTT SKR Mini E3 V1.2! Thank you for your great work and I look forward to more great tutorials.
Aha, perfect! I have an SKR 1.4 in the Amazon delivery aether, this will be incredibly useful when it finally arrives
A day after getting my skr mini v2, you come out with this. This is why you're best Michael!
This is by far the best and most complete Marlin tutorial I have found: Bravo and especially thank you.
I was able to upgrade my CR10-S to Marlin version bugfix-2.1.x without any problem and I even added the zzz afterwards thanks to another of your videos.
It's like having a brand new printer now.
Thank you so much for your wonderful work.
Before I came across your video, I was worried that I may do something wrong and 'Brick' my printer. I followed your instructions, to the letter, and everything went smoothly. Many thanks for all content that you upload, it has saved time and money over and over again. Keep up the good work.
Best tutorials hands down. Easy to follow step by step and broken down in chapters makes it easy for any skill level! Thank you!
This is an amazing guide! I highly recommend watching the entire video once or twice all the way through before doing anything. There were a few times throughout this process where I ran into issues which he explained 5 seconds after the point at which I was paused... (Close Cura because it blocks the COM port, for example.)
This was EVERYTHING I needed. I have an Ender 3 but it was shipped with the 4.2.2 board. I almost tried the 8bit way thinking it was a normal Ender 3... Until your videos pointed out that this was actually a 32bit board. Thank you for taking the time, and giving such detailed instruction in ALL of your Videos!!!!!
did you do the upgrade in your ender 3 with the same files showed in this video?I have the same ender 3 but I have a few doubt
Great video. Just getting into 3D printing with a hand-me-down AnyCubic Kossel Linear Plus delta printer. The original FW was really difficult to get my bed level and had additional problems getting the g-code to execute properly... After much messing around with the Arduino IDE, I finally switched over the VS code and setup like you explain in this video - perfection...! Thank you again, Clay
Genuinely, Thank you for these very informative videos. No other community like the 3D printing one.
Thank you very much for that detailed guide. Was finally able to recompile and upload a new firmware for my Sidewinder X1 to enable printing at higher temperatures after a few hours of failing. :)
MAN - You are the best !!! - I am watching your videos since my first ender3 - and every video of yours I see - you amaze me with the clearest instructions ever. Good on ya mate.
this video just saved me after 5 hours of frustration. literally just trying to add a e3d v6 to my cr10 v3. such a hassle for someone that has little experience with code
I want to buy a control board and install 4 drivers. I want to run 4 stepper motors with a very simple few lines of code that I wrote. I was going to use Arduino, but Arduino is not connected to this control board. But it doesn't matter to me because all I want is to control 4 motors by any method. My reason for wanting to buy this control board is to keep all the drivers and motors in one place. My question is: Can I write my own codes on this card? For example, this motor starts when it receives a signal from the sensor, this motor accelerates when I increase the potentiometer.
That was the first time that I had seen the "Auto Build Marlin" panel. I had just been clicking the tick-mark on the blue bar to compile and the right-arrow at the side to load the newly compiled firmware.
On one computer, I could not install the Platformio extension until I had installed python. Thanks for the video.
I've been looking to do this for my Ender 3 Pro and Anycubic Delta Printer but I couldn't find an up to date video, THIS HELPED SO MUCH
Even if I want to thank you, it won't be enough. The effort and elaboration are beyond what I was expecting.
Just a quick thank you for putting this up. I've midified my printer enough that there's not an ordinary firmware I can download, so I had to compile my own. All went well but for some run out sensor setting (High not Low) and then an optical semsor defined when it didn't need to be (for me). Took some figuring out as to why printer wasn't working but I now know quite a bit more. Thanks again, videos are very helpful.
The Auto build Marlin extension was a great addition to my setup. Thanks!
this video, was spot on my guy! after stuffinf around with other videos and getting no where, this one popped up as a next in line, and i wish i had of seen this first!
Thank you for this tutorial. I was going nuts trying to figure out how to update my Z_Max_POS after installing my Xtender kit for the Z axis. I was missing all the extensions. Your video is a lifesaver!
Hi, sorry this comment does not bring information, but I'm so happy to have found these so clear explanations, in an english perfectly understandable for foreigners that I need to send a big THANKS !!
Another fantastic Video! Just in time. :) Updates with all three, VSCode, Python, and Marlin itself rendered me unable to compile (2.06) Marlin configs. Thank you, Sir!
thanks for updating this video and putting a pointer from your old one to here. That saved me a lot of trouble. Subscribed
Went and looked at about 4 other videos before discovering this one, Easy to follow, clear concise instructions, and best of all it worked!!! I accidentally Blue screened my ender 3 Pro trying to flash the firmware using the bin from reality big mistake! this video saved my printer(Literally i was about to throw it out the window LOL). THANK YOU a million times!!!
Thanks for this. I skipped around the video, going over things I had already figured out, but I was able to use the video to fill in the gaps and build a perfect firmware for my ender 3 pro v1.5 with a bltouch! :)
Dude, thank you! I not only have custom firmware for my Ender 3 but I have learned a lot about vscode and github as well. You really do rock!
I never comment on videos, but you are truly a Saint! This was so helpful in getting my Sunlu S9 new and modified firmware(All metal hotend is now capable of 285c!) Thank you so much!
As someone who struggles with reading comprehension, I really appreciate this guide. Thank you
Very thorough & easy to follow! Excellent quality.
Let me start by saying, this is the best video on the internet to update the firmware on Creality 3D V1.1.4. Trust me, I may not have seen them all, but I've seen a ton and I must have 40 tabs open in my browser right now. However there are differences here from what I experienced. No .bin file after compile. All I was able to produce was a .hex and .elf. When I finally got Marlin bugfix-2.0.x to upload on my Creality 3D V1.1.4, as it turns out, I had to use melzi_optiboot. What is not on this video is a feature where after you click build in Marlin, you get four choices: melzi, melzi_optimized, melzi_optiboot & melzi_optiboot_optimized. As it turns out, for the Creality 3D V1.1.4 board, I needed to use optiboot. Maybe melzi_optiboot_optimized would have worked also, but once I got my printer back with thermal protection, there was NO WAY I was going to try anything else and jeopardize my printer again. Also, the first time you click build, you'll get errors. After it's finished, click it again and it builds fine and gives you the blessed "success" status. Over the course of three days, I probably spent about 25 hours getting this to work and lost a nights sleep after thinking I bricked my old motherboard. There are so many particulars and settings that can cause errors. The Creality (Melzi) V1.1.4 board must be pretty bullet proof, because if there was a way to actually brick it, my countless attempts at getting this to work first with Arduino and then VSCode would have most assuredly have had me ordering a new motherboard on Amazon. One more piece of advice: Put a new motherboard in your shopping cart on Amazon. Doing that made my current motherboard realize it had better get its act together. ;-) Good luck to everyone brave enough to add a bootloader and update their firmware. FYI, used the Elegoo Uno R3 to upload my bootloader using the first half of the video called "Ender 3 Pro Firmware Update - Complete Guide" over on 3D Printscape and then came here to do the build & upload with VScode.
One last update: While I only did this bootloader install and firmware update for thermal runaway protection, there are a number of improvements overall to my Ender 3 Pro that make it better -- Auto Home is much less violent for example. However, if you're reading this to get ready to install bootloader/firmware, do yourself a big favor and just get a new up to date motherboard.
It's helps (useful advise with melzi_optiboot)
Thanks for this. I was struggling with out of sync errors - switching from 'melzi_optimized' to 'melzi_optiboot_optimized' fixed the problem & the upload was successful.
Thanks alot! You sucessfully made me a Marlin programmer! :D By far the best broken down explanation for all of this in 2020! Cheers and a late Merry Christmas!
Thanks Michael. As always, this one is a great video. Very easy to follow.
Thank you so much for breaking this down into easily consumable portions.
Thanks again for an excellent resource. I just received a BTT SKR V3 Turbo and am building the firmware. I had 2 fails and I moved the Firmware folder up each time, when I got to Documents, with just that folder, VS built the file fine. Hope this helps someone along the way.
I've been putting off moving away from Arduino IDE, thank you for making such a great guide!
Timely as always! Wanted to update my build as I've been using an old 2.0.x from way back last year. Sadly, didn't find any of the config files very useful as I have an old SKR 1.3, not one of the new ones, so still had to trawl through the configs copying over from my old build.
Finally I got my Hemera install firmware working with this method!! I really appreciate it thanks again for a great video! 👍🏼👍🏼
Thank you so much. I had the same problems and fix was perfect. I guess we are all on the same page with this upgrade.
Thank you. I've watched this several times and I finally compiled my own jyers firmware with a BTT smart filament sensor (used another video of yours for the coding) for my Ender 3v2. Down the road I'm going to try my hand at adding a SKR v2 and two Big Tree Tech closed loop steppers for the x and y motion on a Sapphire plus. Should be fun
I love your videos, they are always very informative and very well structured with a few good jokes thrown in
Thank you! This was navigating blind for me, I have no reference with this sort of thing. I followed another video and was failing because my MacBook Pro (Me) was having a hard time figuring out how to upload with the cable. I'm kind of glad it didn't work because the build architecture was not correct for the newer 32bit silent board. Using your tutorial step by step I was able to find the correct zip files for the config, place them in the correct folders, using the correct build architecture in VS Code. Then using the .bin file it created, placed it on the SD Micro and it worked! It only took me a day...lol!!
Enjoying your content mate!!!
Thank you so much for this video. Incredibly helpful and easy to follow!
Excellent video, super informative! Just flashed my Wanhao i3 mini from 1.1.4 to 2.0 . It was super easy, thank you! You've gained a sub!
As a techy you I feel the pacing is slow, so running at 1.25, or rather 1.5 speed is comfortable and engaging.
Thank you for this video. I managed to upgrade the firmware on my ender 3 pro! I couldn't have done it without this video. Thank you very much!
Well's it very outdated as 32 bit boards are out
This has been such a great help, thank you.
I have not installed marlin firmware in a long time since Feb 2023. So I had forgotten how to build marlin in VScode. Your video got me up and running where other videos and websites just confused me. With all the configuration files you need to install, etc. or so they say.
This was great help for me to solve a problem I was having which need me to learn how to edited marlin.
This is great Michael! I'd love if you did a video on this but for printers that don't have a premade profile on the Marlin Github. For instance a printer with a touchscreen interface instead of the typical dial.
Awesome! My skr mini e3 v2 came today and last time I had a hell of a time
Dusted off my Ender 3 after ~18 months of no use... this guide helped a lot with building new Marlin version. I have few mods (dual z, 1.3 board with TMC2209s, bltouch, new extruder), so had to go through entire configs looking for features I have been using... needless to day - I highly recommend having a file with all the variables that you have enabled and/or have custom values :)
Thank you so much! You were the only person that made a tutorial that worked!
Great Video Michael,I shared to my group and saved to my RUclips Page..Keep Up the Great work my friend.
Thanks Michael, as a newbie to VS Code it was really helpful. 👍
Thanks Michael, now I know what to do when my Bigtree skr arrives later this week.
Thanks for putting this together. It worked out great for me.
Dude i needed this video 2 days ago
I needed this video about two weeks ago. Still useful to have all this info in a easily accessible place. Thanks very much for putting this together!
Thank you Michael, it is working well with me on Artillery Genius 3D Printer now it is marlin 2.0 .
FYI (Artillery Genius): Just if you want to upload the file to your printer in the last step be Sure your printer is "turned off" and connected via USB.
Thank you for this excellent and extremely helpful tutorial video!
I struggled through this 2 months ago...I feel kinda smart now thank you! Ender 3 Pro, BTT Skr Mini e3 v1.2, BL-Touch
What environment did you use for Marlin Firmware auto build? There are four to choose from _btt, _btt_512K, _btt_USB, _btt_512K_USB and I don't know which one to choose...
@@botteu I'm pretty sure I used BTT_512k but I used a guide from Reddit they have and Ender3 reddit that's super helpful! r/Ender3 and r/fixmyprint helped me a lot!
This video saved my printer! I was running klipper and having terrible reliability, and I couldnt figure out how to switch back. Thank you very much
For those using the SKR mini E3 V2.0 you need to build it in STM32F103RC_BTT_512K
Thanks. I was about to freak out.
THANKYOU!!!
Do you know which i need when running the v1.2, none of the environments work
Fantastic explanation as always!
Thanks :)
My mks gen l just arrived and I had problems in Arduino IDE. Perfect!
this video got you my subscription. well done, thanks for the great work!
Great tutorial, worked for me and my Ender 3 and with BigTreeTech SKR Mini E3 1.2 board.
This video (as all of your videos are) is amazing and incredibly helpful! I did run into a problem at 14:54 and my build failed. The build would fail almost instantly and it was a problem with platformio. Turns out the fix was super simple and worked for my situation and may for anyone else having a similar problem. Just go the platformio file and delete it, C:\Users\You\.platformio. When you reload Visual Studio it will re-install the .platformio file and should hopefully fix the fail. Hope this helps someone!
I went to the comment section to search for a comment like yours, found it and thanks a lot for the solution.
It worked.
@@lopany Great video but problems for me: Getting "the term platformio is not recognized as the name of a cmdlet, function, script...." Removed the file as you say, downgraded to a lower version of platformio IDE, tried 3 different Win 10 PCs, still the same error. I found Arduino so easy compared to this.
Solved in case it helps. When I open the Folder with all the Marlin files, below LICENSE and Makefile, there was a a platformio.ini. I clicked that and only then did it install. Up to this, when I looked at installed extensions, it showed it as installed, I could disable and had uninstall available too
Amazingly helpful, thank you so much
Damn.. Took me 6 hours of forum search and another 3 hours of RUclips videos to be told just to use an SD card for uploading the firmware.. The internet told me to connect the printer and send it over and it didn't work and I thought I did something wrong.. Damnit.. Thanks dude, have my like and my sub!
thanks as always bro! easy peasy lemon squeezy ! up and running and ready for my bl touch upgrade ! well as soon as amazon delivers it haha
when building the file for the ender 3 pro with v427 board it shows 5 different environments. witch one do i use?
This is a fantastic and simple guide.
Gosh, though this is all new to me, you give me hope.
I swear every time I get a new part for my printer you have a guide for it within 36 hours
Or is it you that buys a part within 36hrs of him posting the respective vidio.....
I’ve just spent the last 4 hours trying to compile the firmware for my ender 3 pro from the 4.2.2 board to a new 4.2.7 board. I was losing the will to live. I gave up. Came onto RUclips and this is my first choice 😅 back at it tomorrow hahah
@@spfrisby Same here got exactly the error code he put a screenshot of at the beginning of the video!
Wow OK, a 2yr old video solves my problem. Been butting my head against the wall trying to compile with Arduino. 🤦♂ VCode - worked perfect. TY Sir! 👏
Great video! I learned a lot and this got me to try Visual Studio. Much better than Arduino IDE method! Thanks Michael!
Thanks Michael! This worked great. Some are having issues with file size for windows but The melzi_optiboot_optimized compiled just fine on windows for me.
Great walk through
Thanks for sharing :-)
I am so grateful you do all these guides. Every upgrade I make, you have a clear, excellent video about! Thanks!
Potato gag. Loved it, laughed out load. Bet you pupils miss you A LOT. Keep up the good work- gives me a reason to break a perfectly set-up Ender-5. Again. (but Tinkering is a Class-A addiction). Cheers.
Your videos are fantastic!
Thank you for the video. Been struggling for a few days and it was just the simple act of installing a driver to properly recognize the 3D printer. Obvious now but not in the moment as I was getting other errors (file path length in the Arduino IDE).
What driver was that?
@@Izik09834 I just used the driver link that was in the video description.
Thanks! I used your last guide successfully with Atom, but after a couple failed prints, I realized I needed to actually configure the dang thing (I have since found the recommended settings on github). I got that printermods direct drive coming very soon and will recompile with this guide. Printing on hold til then. Hopefully, I can figure out the correct settings on the first go with your other guide I have bookmarked. :D
In fact, I am now a Patreon supporter. You have already helped me immensely and I'm gonna have questions for folks here and there. Appreciate ya!
Michael, you're a life saver man. Thanks a lot.
Thanks! Also enabled manual tramming using the same firmware.
Bardzo dobry film. Robiłem to 2 miesiące temu i nie udało się. Teraz dzięki Tobie wiem dla czego. Nie wiedziałem że potrzebny jest drugi plik. Bardzo mi pomogłeś tym filmem. Pozdrowienia z Polski
Oglądam wiele takich kanałow i obecnie Twój Teaching Tech oraz CHEP są najlepsze. Powodzenia
thank you lots easier to understand for us code beginners
Well that took a minute, but i have never used most this software only programmed a lil board using Arduino IDE once for my brother (torch height controller for a plasma cutting table) but i managed to get my Sovol SV01 up and running with my own firmware.
Hard to replace the board so i installed a skr mini e3 v2 (and tft35 e3 v3) and could easily find firmware pre-compiled for it IF i had a bltouch installed.
Figured if i had to modify a firmware to remove bltouch then i might as well learn to just compile my own.
Ordered a bltouch for it but wanted to use it until i got it and my 1st printer was a cr6se so i needed to learn manual bed leveling anyway
Love the channel keep it up.
Thankyou very much, your content was very clear and help alot!
I actually started laughing out loud when you tried to turn on the potato. My wife thinks I've lost it since I'm laughing at 3d printing videos
You do great work!
Damn I needed this update