TOYOTA 2E Replacing new Valve Stem Oil Seals without removing the Cylinder Head
HTML-код
- Опубликовано: 23 авг 2024
- If your TOYOTA 2E Corolla smokes at cold startup or accelerating from idle, burning oil, engine misfiring, run rough acting weird, spark plug coated with hard crust from oil burning....for sure your aging Valve seal have been hardened and few of them are even very loose. This video tutorial will cure your blue smoke problem.
Removing valve keeper valve spring the easy way • 2E engine toyota remov...
Removing rocker arms and installing • 2E engine toyota remov...
Removing camshaft and installing camshaft in order • 2E engine toyota remov...
516,177
I still hear this song when I do my valve stem seals :-))
Hehehehe that song still running in my head 2019
playstation2bigs I will play it doing my seals job ahah it’s epic it put you in the zone
@@thebridge5483 hahahahaha hehehehehe
Great video, I am a builder not a mechanic, but I love mechanics, I will now be doing my own valve seals thanks to you. Do not under estimate what a help and service you have provided, may you be richly blessed. Paul F
Thank you !!!
I like how this was done with regular tools nothing Fancy.
Hi Sir! Thank you for posting this video.I recently bought a 2000 Corolla XE Lovelife with 2E 1300cc engine with 97KMS Odo Reading. I just had a recent oil change 3 weeks ago(with toyota regular oil), changed clutch(the whole replacement kit), air element, fuel filter oil filter, spark plugs, drained, radiator fluid, power steering fluid, brake fluid and replaced it with Genuine Toyota Parts and fluids. and then I had a 300km roundqtrip to Tarlac. I noticed a white/bluish smoke everytime i hit the pedal(during overtakes or hard starts). I used a petron blaze 100 or shell super premium 97 octane to my belief that the fuel will "clean" or reduce the carbon deposits inside the engine. Normally, after driving, before i turn off the engine, I was looking for a water product that comes out from the exhaust. but it was greasy black instead with a strong smell. and to my surprise, i was only averaging 5kms/l in city(40-60kph) and 9kms/l in highway(60-90kph) driving My mekaniko says that he is not seeing any problems with it.. though the engine was running smooth even after the long drives and manila traffic. What can you recommend on this issue of mine. Do you recommend any shops that i can visit within makati, pasig, or qc? Or can you personally check the unit? haha
Noticing any oil consumption?
+playstation2bigs as of now, none.. i just had it reduced kasi napasobra ung lagay nung oil when it was oil changed.
+Apolonio Julio Leonor Good, your engine is fine
I wanna do this on my 2011 Hyundai sonata. I don't know if it's the valve stem seals but it's what I'm gonna be replacing next. So far, I've already had the valve cover gasket replaced, pcv valve to try and relieve this oil consumption problem... Thanks for the video, it helps give me a good idea of what to look forward too.
This rope method is incredible!!! Thank you so much! This video is good, coz this engine is good to overview, not looking in black hole ;D
Speaker muting is a beautiful thing.
great video, it was very helpful. I'm doing this this weekend to my 01 kia rio.hope it is done quick without problems.
Mha brother, you got yourself a new subscriber 🎉 thank you!
I recently purchased a 1996 toyota camry 2.2 with 97,000 miles, obviously it sat for many years unused, it been i perfect car so far except one thing ,oil consumption, 1 quart every 1000 miles, do you think its piston rings or valve seals????
when you put the keepers back on eith vice grips, the valve stem sat higher than normal. will it slip into place when you run the engine?
I was wondering the same.
Best is to see and take pictures how it used to be before...
No words said. But every little thing I understood clearly thank you for showing me this
Jaun Lucio oh thank you
when I removed my old seals, part of the rubber from the seals remained. I was wondering why I did not feel any click when I pushed the new seals on. After removing the 3rd seal and inspecting, I noticed a ring of rubber missing from the bottom of the old seal. I looked in the engine a there was the missing rubber still stuck in there. I had to remove the new two new seals I had just installed and clean out that old rubber. :-)
what kind of toyota engine you have? :D
You made this doable for me. Thank you iplaystation2bigs!! God bless you!
Thanks for watching
I hope that you complete all the work on how to assemble all the processes and add the oil before turning the engine .
Use your common sense nibbro
thanks for the video, that helped alot..a goof mechanic with simple tools can do just about anything
John Szoke your welcome :)
Yes and Your Welcome
Thank you for such a useful material. If I may ask, would the same procedure, work for DOUBLE CAMSHAFT ENGINE, manly the Toyota 21 R or 22 R ?? An answer is appreciated.
Nice Job!! My 3E is next as I am fouling #2 and #3 plugs after 500 miles. But I know they are all leaking tool. i love how light the valve springs are that you can just depress them by hand with the vice grips. Thanks for the video.
Hola amigo buen video felicitaciones. Pero una pregunta, la cuerda también la colocamos en el pistón 4? Que esta también abajo? Gracias.
ermaton all the cylinder was placed by the rope. piston 1 and 4 below, piston 2 and 3 up
Might as well do the timing belt if it hasn't been done at this point
3:03 isk if anyone noticed but barking dogs in the background. I like dogs
Nice, thanks
Corolla 2e engine air gas adjustment video? seriously I would be very grateful
im glad i saw this video. i was about to go buy a valve spring tool. now i know i can just use a socket
When oil is burned from the valve seals, smoke is always blue?
@@billmade8906 common to this 2e engine is blue when valve seals are dead
Nice video. I've done this rope maneuver before about 2yrs ago on my mazda astina 180se DOHC. The springs were extremely hard to press down (it really was a pain in the axx) so I had to design a tool to press it down so that those keepers could clip in....My wife's Toyota Tazz has the same problem now. After watching your video just using a vice grip to push the springs down made me wonder if the Toyota 2e springs are softer to press down. Bcoz on the mazda that'll never work.
I have strong hands that's why the springs on 2E are soft
@@playstation2bigs strong hands you say, You won't be able to push the mazda dohc springs down with just a vice grip.
@@playstation2bigs lol. Thanks for the video. Im attempting this tonight. Eish
@@jonb4667 good luck Nibbro
@@playstation2bigs much appreciated bro. Thanks
Amazing how you did it, without special tools 👍👏👏
Thanks hehehehe
1 more question since you remove your rocker arm you need to tune up them again??
But if i see the bubbles between the top and block whell the car idling what happen .
Please show me how to adjust the air and fuel mixture in the carburetor 2e .starlet 1.3 thank's
I had enough of the music in 34 seconds.
Excellent
You can do this using compressed air instead of using the rope method...much faster and you dont have to turn the engine over........
To mention that at 125 mph in 10 minutes it burned 2 liters of oil. But at 70mph it doesnt lose that much
Great video. Can you extend the video on how to install the rocker arm back on?
Cooldude 22 i have a video on that, just look my other videos
Thank you! Using this method....how many hours did this take on average? About to take on this for my 2002 Camry. Thank you
i have leak coming from transmission input shaft do i need to get the whole transmission disassembled or just take it out with screw driver once transmission unmounted
Can you replace the camshaft without removing the cylinder head? And can you do it without detaching the distributor??
Hi Playstation2bigs. I have a toyota corolla xl 1997 and your videos were very helpful. I would like to know if you have a actual picture or tutorial about Vacuum diagram of your corolla. I know you posted a video on this wayback 2012 but maybe you can post an actual video on this. Thanks
michelle cinches hi add me on facebook i'll give you a new picture diagram
Sir saan po shop nyo?thanks..
You literally have a camera with working sound ! I don’t understand why you just dont speak ? It would make this video so much simpler and faster
Thanks Sir! Malaking tulong to, tanong ko lang, di naman kelangan mag change oil?
Hindi na
How tight do the cam bolts need to be, I expect you don't have a torque wrench .
a 6 feet nylon rope to prevent valve falling into piston right??
you're a genius!
thanks for watching
How many kilometers did the engine do before the oil seal problem?
And have you rebuilt the cylinders ? At how many km?
I would like to know because i have a 2E engine with 252 thousand km. :)
Cheers
Awesome video. Very clear illustration. Will this work on a 97 avalon 3.0L. I assume it will but had a mechanic friend tell me it would not. I cant see why it would not? Thanks in advance!
Hi!!! never seen a 97 avalon 3.0L before, AFAIK all the engine are the same for this procedure
Cool, thank you
Your Welcome mate
Sir ask kulang bangong overhaul po makina ko tapos hindi omandar nakatiming nmn tapos malakas Ang buttery...pag start parang mahigpit po Ang makina ani po vah problima
hi! nice video, very helpful, ask ko lng kung ililipat p nga b yun rope? palagay q ndi na kelangan kya lng ask ko n din para sure. tnx very much!
Ian Zamora ililipat para hindi mahulog yung valve
This also goes for the 3E and the 3E-E engine as well
Yes
@@playstation2bigs How do you install the valve springs back?
@@nihonkokusai did you watch the whole video?
How Long did the whole process take if you don't film it?
3 hours
Wow, thanks much appreciated 👍👍👍
show me picture of setting correct of the rocker 2E engine Toyota
hey if I let the pin fall into the gap what's the easiest way to get it out ?
Good job!I got little bit knowelege about it. Thanks 🙏
You're welcome
nice job and thank you for posting this! it is very helpful!
Jie Chen Your Welcome ;)
Sir ano po n ang purpose Ng Tali pumasok s piston no 1
Sir,
ask ko lang kung nag service kayo as a mechanic? really need your help regarding my 2e engine. Thank you!
Could you do a valve clearance video for the 2e
I have a video, just search to my channel
Boss gandang hapon saan po ba shop mo? gusto ko ipagawa sana transmission ko 2e engine corolla
I was in holyday drove for 3500 miles and ive put around 11 litres of oil so its loosing quite a lot. Anyone knows if these seals are the problem or it can be the piston rings.all my exaust is full of oil.
do a compression test first
Are the Toyota 2e springs really that soft just to use a Vice Grip to press them down?
Yes
Pegs Elumba they are the same for 2E engine
playstation2bigs 🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓👊👊🤓🤓🤓🤓🤓🤓🤓
playstation2bigs
Hello po sir ask lang ma aapply po ba etong technic na eto sa ibang makina ;).... like for a example Nissan Sentra b12 na 12v
Good video but it'd be a lot better if you turn that stupid music off and actually explained what you're doing and why if your deaf I understand but I mean you could still print out the words
DEAF POWER!!
thank you for not blabbing and just showing the facts.........
Would it be a similar process on a 22re engine?
Do you remove all the oil first? thanks.
Are you suppose to rotate engine till piston goes up ?
Yes, top dead center
I've got massive white smoke coming from my exhaust as soon as i start the engine ,gas is getting into the oil and its definitely not the head gasket as the coolants not getting into the oil and other than the possibility of the rings -stems /guides etc being worn would the valve stem seals be a possibility ? this is a 20 r that was not started in 8-10 years and after finally cleaning/setting the carb where it idled properly etc -this began so figured i'd ask your opinion ty
i see -i thought a head mainly meant coolant thanks
yes ive heard -lol
ganito din ung 2e engine ko..taga saan po kayo?baka pwede papalitan valve seal ng oto ko..may konting puting usok lumalabas..pero kapag naka on AC mejo mas marami ng konti
Boss maraming salamat sa tutorial nato. Tanong ko lang, same lang valve seal ng 2E sa 3E engine?
No idea
Can this be done with the 4cyl 5SFE? in a 1999 Camry?
We never have that 5SFE here
@@playstation2bigs What!? No 4 Cylinder option!? How unfortunate! 🙏🤷♂️
Great video 👍
good job
Jp Dejager thank
Hi brother, how many meters of nylon did you use per cylinder?
The longer the better Nibbro
Hold my beer,i bet i can save 5 minutes and do it in 11
heheheehe yup
I don't know why But, I keep picturing this song as the background music to a gang bang.
Great video thanks
anong gamit mong radiator? napalitan mo na ang radiator mo? ilang rows yan?
Sir sna masagot mu katanungan ko...2e engine din makina ko...wla nmn pong talsik o usok na na lumalabas s dipstick , d rin nmn kumakain ng langis or d rin mausok good na good padin umaandar kahit matagal d n nagamit madaling paandarin...pero pansin kolng sir natural ba na may konting langis na lumalabas sa pcv valve? Sa pansin ko din pagbinubunot ko un dipstick nagbabago un minor nababa idle nia pagbinalik ko un diostick bumabalik din un ya.ang idle nia...anu kaya un sir?
Ang husay naman po kuya, galing galing!!!
Kuya ask ko lang kasi ung skd ko na 12 valve nag overheat kasi nalimutan mag lagay ng tubig tsaka maluluwag yung hose pero ok na sya. After na mangyari yung overheat nag start na po syang mamalya at mausok. Sinilip ko sparkplug tulad din po sa inyo maitim at malangis. Nag pa tanong nadin ako sa mga mekaniko ang swestyon po nila ay valveoilseal at ipa machineshop, medyo malaki gastos pag ganun gawin ko eh sa tantsa ko naman po di aabot sa ganon kasi pag nalilinis ko sparkplug pino naman po manakbo. At my ownrisk pwede ko pong gawin yung ginawa nyo, mga mag kano po magagastos ko sa materyales at ano dapat bilhin ko? Tapos yung sa tali po, ililipat ko din po ba sa pangalawang butas?
Maraming salamat po kuya, more vids pa po para madami matuto!
Kung first time mo mag kalikot ng makina wag muna gawin
playstation2bigs opo first time po, halos lahat ako na po gumagawa ng oto ko from carbs, underchasi, electrical... etc minor repair nakakaintindi, makina nalang po ang hindi ko nabubuksan tsaka tranny. Anyway kuya sir thanks po sa reply... masusunod po diko muna gagalawin. More vids and more power!
Nice 👍👍👍
Thanks
Thanks very informative sir! 👌
Thanks for watching
ask ko lang lagi nag over heat ang makina ng 2e inalis na namin sending unit
Hi sir, how I know that valves don't need calibration?
no noise, means no calibration
thank you
anong size po ng rope?
Saan avail valve toyota corolla 16 valve
Auto supply marami
sarap gayahin pero..... bitin yung vid. pero salamat parin galing!! pero sa begginer na tulad ko sana nakompleto hehehehe pero ok na yan
Aralin mo muna paano mag kabit ng timing belt ng 2E, the rest madali na
@@playstation2bigs ty sir @playstation2bigs maraming salamat po. obserbahan ko.muna ung sparkplug ko mukhang carbon build up tama ng 2E ng ate ko e.... pg ganun tanggalng kalahati..... ty ty b safe po
@@playstation2bigs idol follow question.diko kasi mahanap facebook kaya dito ko nalang itatanong to.
kaya bang baklasin ng longbar wrench yung crankshaft pulley. wla kasi akong powertools. (2E toyota parin to). TY. ADVANCE
@@dfespozo oo naman gagamit ka ng rope ulit, itali mo yung long bar at I crank start mo yung starter ng konti para lumuwag yung bolt sa crank pulley, pero dapat patay kuryente sa distributor para hindi mag start ang makina, unplug mo lang yung wire sa distributor
@@dfespozo "starter bump method" tawag dun
Like dude, that's mean bro. I mean like, hey ya know like what I'm talking bout dude? Like man, yeah dude... (I'm yo grandpa, but figured since you playing that music, I talk like y'all boys do. Maybe dude.).
paps.. same lang din ba ang gagawin sa pag remove ng valve seal sa 4af engine
4af paps dohc tanggal camshaft nun.
hi, where is the oil pressure sensor on this engine ?
at the engine block near exhaust manifold
super
where did you buy your valve stem seal? what brand is it ? thanks
nok oil seals, nearest auto supply shop
Buen video
my main problem is what if my timing is not correct?
internal combustion is not timed
Great, thanks man,,,
Does the engine stops eat oil?
+Ilya Aganichev a big yes
I headbang to the whole video.
LMAO
Sir after changing valve seal, normal ba na maingay makina, may ticking sound, parang diesel engine.
Baka kinarambola mo mga rocker arm ? Dapat doon parin sila sa dating position para hindi na mag adjust ng valve clearance
playstation2bigs hindi ko naman kinarambola pro inadjust ko since masikip valve clearance --number 8 sa intake(.20mm) at nunber 10 exhaust(.25mm)
Dapat pala diko na ginalaw hehehe
Safe naman ibyahe to sir papunta sa mekaniko? Hahaha
@@hernethmercado3107 intake at exhaust lahat .20mm
playstation2bigs maraming salamat sa replies sir 😅👍🏻
playstation2bigs boss salamat sa tutorials and replies nyo. Rusty brown na ngayon sparkplugs ko! Nawala narin ingay sa makina. Ok yung .20mm clearance. 👍🏻 More tutorials to come!
Saan po loc
Would have been more helpful with explanation by talking... just saying
Sos un fenomeno, te falto esplicar como las calibras, aparte que no hablas esplicando nada.
i can't understand bro make it in english
SOS a phenomenon, you lack to explain as you gauge them, separated that you don't speak, you are not explaining anything.
Toyota Corolla with 2E engine???
Wich model and year of production is that??
1995 from Philippines
@@playstation2bigs a4fe is existing since 1982, and changed to injection system in 1993 , i m not sure ..send here a link to that specific car model, that's interesting