Hey, it will work but to ease your concern here is my advice. Double check with a multimeter the 5v and GND point while the mouse is plugged in. Then snap off the connector area and hook up the PCB mod!
Did you end up trying this? I opened up my MX Master 2S and the body of the USB connector does not have a direct connection to the ground point used for this mod, so I'm a bit curious if this would work.
Nice mod you got there. Just bought the 1st gen MX Master for $12 and I might consider this mod when I need to replace the battery eventually.
Thank you and 12$ for the gen 1! Nice deal
Great work! Do you know if this works with the MX Master 2S?
Hey, it will work but to ease your concern here is my advice.
Double check with a multimeter the 5v and GND point while the mouse is plugged in. Then snap off the connector area and hook up the PCB mod!
Did you end up trying this? I opened up my MX Master 2S and the body of the USB connector does not have a direct connection to the ground point used for this mod, so I'm a bit curious if this would work.
Do I need to hone down some of the plastic in order to fit the usb-c cable in the usb-c connector?
Correct, you will need to remove about 0.5mm of plastic from each side as the usb c port is wider than micro
No shipping to Canada?
I’ll add an extra option for Canada today
Shipping option added, should be updated.
@@TomasApoloniaThank you, ordered!