Seems that if you've multiple pair of halo you will have multiple switch on your dasboard and we cannot control them with your own aux switch. But the look is pretty good.
Thank you for your suggestion! Currently, we don’t support connecting these for amber turn signals, but we appreciate your feedback and will consider it for future product updates.
This is usually specified in our product manual. If you can't find it, please visit our official website and contact our online customer service. We will provide you with more detailed information.
@NovsightAutoLighting I have a question. I got the 20" Rock Series light bar, but I can't figure out the correct position (top-button) should the LEDs on the inside be on the top with the power cord on the left or button with the cord on the right?. The beam pattern looks like a triangle and don't know if the flat side should be on the top or bottom?. Please advise on what the correct position by design should be as I'm sure I'm not the only one that it's wondering. Also, the black screws on the side are for adjusting the lenses? Thanks
@NovsightAutoLighting Thank you so much for your reply. That is how I installed, but I was unsure as all the photos and graficks in the online store have it with the LEDs positioned on the top. I guess that whoever took the photos and designed the graficks made a mistake. I looked everywhere on the instructions and documentation, but the correct position isn't mentioned. Thank you again, and hopefully, novsight will add this information to the instructions so future buyers get the most of this incredible light bar
Thank you for your understanding and feedback. We apologize for any confusion caused by the photos and graphics. We’ll make sure to update the instructions and documentation to include the correct installation information. Your input is valuable in helping us improve our products and support.👍
let me ask you , are you wiring these into your rockers or are you mounting the switch that comes with it for every light cause thats going to get messy ?
so you need to mount the supplied switches that a insane . I seen one guy cut out the relay box out but then you loose some functionlity of the light itself @@toyotabrony
exactly , watch the video , you loose functionality because he cut out the relay box and tossed it and picked what light he favored , I guess its no big deal if you want the full functionality you have to have two rockers for your Halos . I like the Halos but I don't necessarily want 2 rockers for my ditch lights . My truck comes stock with a 3 gang switch im using 1 for my winch already and don't want to use the other two for my ditch lights just to have full functionality. probably settle for the cyber 1 call it a day.
Can you guys clarify the lens design and show photos of it so we know what like we’re buying? Based off the website, every single light has a clear lens with no optics.
Fantastic video. Incredible lights!
These look awesome!
I’ve been waiting for these
Seems that if you've multiple pair of halo you will have multiple switch on your dasboard and we cannot control them with your own aux switch. But the look is pretty good.
Thanks for your message.Maybe you could try to remove the old lights and connect the halo lights to the auxiliary switch.
It'd be nice if there was a way to hook these up for the amber turn signal.
Thank you for your suggestion! Currently, we don’t support connecting these for amber turn signals, but we appreciate your feedback and will consider it for future product updates.
Trying to figure out what size are the backet screws? im trying to get a T nut for my 4x4 Victory crossbar roofrack? thanks!
This is usually specified in our product manual. If you can't find it, please visit our official website and contact our online customer service. We will provide you with more detailed information.
@NovsightAutoLighting I have a question. I got the 20" Rock Series light bar, but I can't figure out the correct position (top-button) should the LEDs on the inside be on the top with the power cord on the left or button with the cord on the right?. The beam pattern looks like a triangle and don't know if the flat side should be on the top or bottom?. Please advise on what the correct position by design should be as I'm sure I'm not the only one that it's wondering. Also, the black screws on the side are for adjusting the lenses? Thanks
Hello, the correct installation method is with the light-emitting diodes (LEDs) positioned on the bottom.
@NovsightAutoLighting Thank you so much for your reply. That is how I installed, but I was unsure as all the photos and graficks in the online store have it with the LEDs positioned on the top. I guess that whoever took the photos and designed the graficks made a mistake. I looked everywhere on the instructions and documentation, but the correct position isn't mentioned.
Thank you again, and hopefully, novsight will add this information to the instructions so future buyers get the most of this incredible light bar
Thank you for your understanding and feedback. We apologize for any confusion caused by the photos and graphics. We’ll make sure to update the instructions and documentation to include the correct installation information. Your input is valuable in helping us improve our products and support.👍
let me ask you , are you wiring these into your rockers or are you mounting the switch that comes with it for every light cause thats going to get messy ?
I’m sure nowadays modern tech builder of the led pod lights comes with connectors with no bare wire connection
so you need to mount the supplied switches that a insane . I seen one guy cut out the relay box out but then you loose some functionlity of the light itself @@toyotabrony
Hi, regarding the wiring problem, you can use this video as a reference: ruclips.net/video/LkOkVknd6Ms/видео.htmlsi=QdPL2nAfR_lxmqAy
exactly , watch the video , you loose functionality because he cut out the relay box and tossed it and picked what light he favored , I guess its no big deal if you want the full functionality you have to have two rockers for your Halos . I like the Halos but I don't necessarily want 2 rockers for my ditch lights . My truck comes stock with a 3 gang switch im using 1 for my winch already and don't want to use the other two for my ditch lights just to have full functionality. probably settle for the cyber 1 call it a day.
Can you guys clarify the lens design and show photos of it so we know what like we’re buying? Based off the website, every single light has a clear lens with no optics.