Helpful hint: Get a big cardboard box/lid and draw a picture of the door. Then, as you follow this video, spear holes into it in the appropriate places for each screw and bolt you remove. Put each screw and bolt into the correct holes in your drawing of the door as you remove them. This way, as you reassemble the parts, you'll always know which screw goes where.
great video, thanks from a cash strapped college tuition paying dad. Really helped me install on my daughters old car. Now she can hit the drive thru in style again.
+Kelly Garrou Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Thanks for the instructions, I did it today and the only snag, it took quiet a while to line up the glass with the new regulator. Not sure why, but it's working now! Thanks again.
Thanks for your help 1A, I was able to get the regulator out of a Camry that was heading to the scrapper and now my right front window works again! The previous owner just removed the old one and used a couple of screws to hold the window up; thankfully nothing was broken and I am using 22 year old parts haha
Wow, I can actually hear what you're saying and the camera stays in focus! So many "how-to" videos have lousy production values. Not that I don't appreciate the effort. Anyway, kudos on the video. Now I have to go out to the car and get started. I do have one question though. My window is currently down/open and I'd like to keep it up/closed. Is there a way for me to safely keep the window in the up position? It will be temporary but I want to be certain to keep the window closed until I'm ready to fix it. Thank you for any suggestions, and again, thank you for your clear instructions.
Trying to figure out, why you need to replace, if it goes up and down fine like in video. Maybe next time, do a video where it doesn't work. Show us how to remove a window stuck all the way up or all the way down like others asked about. Jmho.
Great video, a very confident person. My question is; I have to replace the driver's window motor on a 1998 Lexus ES 300, how similar will the task be compared to the Camry 98? What are the differences in the task? Thanks Gary
Greatly appreciate the part & the video guys just done driver's side my 1998 Toyota Camry with the great quality part I purchased from 1Aauto....5 stars
very good a mechanic that gives really good direction very good young man and if you have any one that films in las vegas i have a 98 camry give me a a message and lets put A video out not in a shop in my driveway for the bym.
+Doug Piper Thanks for watching! You should be able to tape up the window like in the video, and with the the regulator unbolted it should compress freely. In some cases you might have to open up the motor and manually crank it down. 1aauto.com
How do I know if I need to do this instead of just replacing the power window switch? Only my driver's side window will not roll up or down; all the other windows work. I just wanted to ask before I follow this tutorial(20mins) instead of the power switch tutorial(5 mins).
Great video, but my window is stuck completely down with no power to raise it to the height to use the access holes. How do I get to the bolts if I can't raise the window? Thanks in advance
+Kreig Marzolf Thank you for checking us out. You will have to manually move the window up and down. In some cases disconnecting the power to the motor will allow for the movement, or by attempting to remove the motor from the regulator to free up the geared arm. 1aauto.com
Great Vid: Question: Why did you remove the door handle. I have replaced many regulators in the past on a Camry 1999 and never had to remove the door handle?
There is no need to remove door handles, so yes your correct, I did all of my 4 doors on my camry without needing to take out door handles, it’s just unnecessary work to do
+david nguyen Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/search?q=window+regulator&year=1998&model=384
So my husband recently replaced the window regulator in our car but now I get a lot of wind noise. I’m assuming it’s the window run that needs to be replaced or is there something we can do to adjust the regulator for a more snug fit ?
+Stephanie Salazar We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
how do I replace the motor and regulator when the window will not roll down? Please help it is the drivers side door and very inconvenient. Thanks for your assistance
Will this work on a 99 camry drivers side door? After watching this I see that my power window switch is slightly different. Only has 1 plug harness, not two. Thanks!
I just finished doing the driver's door window regulator and motor assembly on a '99 Camry. Yes, there's only one big electrical connector for EVERYTHING! Also, when you take the screws out of the underside of the armrest on the door panel, there seems to be only the rear two, not three. On mine, the front underside armrest trim panel area had the hole FOR the front screw. However, with a flashlight, I saw no screw OR any hole for it to go into the steel structure of the door.
+Surprise Inside We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
+gyff jogofl Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1997-01-toyota-camry-window-regulator-passenger-side-front/i/1awrg00093?RUclips&CTA+Comment&XibsbgpEWM
My window regulator works fine, but the window came out of the clamps on the bottom rail that pushes up the window. When the window rolls up, it sticks to the top of the window frame and then falls back down inside the door. I'm thinking of gluing the window back to the clamps on the bottom rail with some urethane. Anyone have any thoughts?
Did you find out? I have a 98 camry and driver side won't budge so will I be able to access bolts? Don't want to take panel and all apart without knowing
@@1AAuto Sorry. Could you please tell me more details about how to switching the pins. I checked all the connectors,they are only one way to connect. Do you mean that cut off the wires and reverse the wires ?
Great video! I have a question that you may be able to help me with. I drive a 2010 Toyota Rav4 and when I was powering my window, I heard something metallic sounding fall downward inside of my door. Then afterwards when I lowered my window I noticed that it was tilting abnormally downward. Any idea what may have happened and how to fix it?
Remove all the bolts that hold the window regulator to the door. Wiggle the regulator free from the door. The window should now come down. You will then need to remove the 2 window bolts using a 10 mill socket and ratchet and/or a ratcheting wrench. Move the window around until you get it into a position that these 2 bolts can be accessed.
Really funny. My window motor is busted, so I need to remove it. But cant do it because I would need a way to lower and raise window. Ductaping the window shut then..
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Helpful hint: Get a big cardboard box/lid and draw a picture of the door. Then, as you follow this video, spear holes into it in the appropriate places for each screw and bolt you remove. Put each screw and bolt into the correct holes in your drawing of the door as you remove them. This way, as you reassemble the parts, you'll always know which screw goes where.
Good idea. Wish I'd seen it before I took mine apart. I have screws and bolts all mixed up in a cup.
Good idea
I could hug the person who thought of making this video. Thank you 🙏🏻 very kindly
great video, thanks from a cash strapped college tuition paying dad. Really helped me install on my daughters old car. Now she can hit the drive thru in style again.
+Kelly Garrou Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
This mechanic was great, did 3 windows already......very much appreciated.....great work and nicely instructed.
fighting with the plastic liner - that's me! Thanks for the great video 1A.
thank you for actually showing all the bolts/ screw locations and the ones that go where. I was going crazy after finding a spare bolt in the door
Thanks for the instructions, I did it today and the only snag, it took quiet a while to line up the glass with the new regulator. Not sure why, but it's working now! Thanks again.
Thanks for your help 1A, I was able to get the regulator out of a Camry that was heading to the scrapper and now my right front window works again! The previous owner just removed the old one and used a couple of screws to hold the window up; thankfully nothing was broken and I am using 22 year old parts haha
Thank you. Not very good mechanically but I’m good with audio and circuits. The video really helped me fix my half rolled dead window
Wow, I can actually hear what you're saying and the camera stays in focus! So many "how-to" videos have lousy production values. Not that I don't appreciate the effort. Anyway, kudos on the video. Now I have to go out to the car and get started. I do have one question though. My window is currently down/open and I'd like to keep it up/closed. Is there a way for me to safely keep the window in the up position? It will be temporary but I want to be certain to keep the window closed until I'm ready to fix it. Thank you for any suggestions, and again, thank you for your clear instructions.
Trying to figure out, why you need to replace, if it goes up and down fine like in video. Maybe next time, do a video where it doesn't work. Show us how to remove a window stuck all the way up or all the way down like others asked about. Jmho.
Great video, a very confident person. My question is; I have to replace the driver's window motor on a 1998 Lexus ES 300, how similar will the task be compared to the Camry 98? What are the differences in the task?
Thanks
Gary
none
What if you can't access the window clamps because it's stuck in the up position when the motor died?
This is a great video. Just what I needed to see to replace mine. Thanks 🙏
Greatly appreciate the part & the video guys just done driver's side my 1998 Toyota Camry with the great quality part I purchased from 1Aauto....5 stars
+Eddie Burnette Thanks for checking us out! 1AAuto.com
Thank you. It’s very detailed and easy to follow.
Excellent video: step by step instructions!
+Trevor Lloyd Thanks for checking us out! 1AAuto.com
Very well explained video. But why would some one dislike it?
Useful video thank you 1 a auto. I hope you can do a video about replacing the trunk latch for the same car
+saif alshammari Thanks for checking us out! We'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Thank you so much for this video متشکرم از شما
Very useful information and experience
Thank you
This guy gets all the tough assignments
Thanks 🙏 for the upload!
Very very clean job brother
+abdul manan Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
very good a mechanic that gives really good direction very good young man and if you have any one that films in las vegas i have a 98 camry give me a a message and lets put A video out not in a shop in my driveway for the bym.
+chief hunterrr Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Truly an awesome how-to video!!! My issue is the window died in the up position. How do I remove the regulator if its stuck in the up position?
Same question
+Doug Piper Thanks for watching! You should be able to tape up the window like in the video, and with the the regulator unbolted it should compress freely. In some cases you might have to open up the motor and manually crank it down. 1aauto.com
@@1AAuto I don't understand. How do you 'open up the motor(??) and crank it' down???
How do I know if I need to do this instead of just replacing the power window switch? Only my driver's side window will not roll up or down; all the other windows work. I just wanted to ask before I follow this tutorial(20mins) instead of the power switch tutorial(5 mins).
My window motor is broken so I can’t roll it down to remove the window. That’s probably the case with most. Any help please?
Great video, but my window is stuck completely down with no power to raise it to the height to use the access holes. How do I get to the bolts if I can't raise the window? Thanks in advance
+Kreig Marzolf Thank you for checking us out. You will have to manually move the window up and down. In some cases disconnecting the power to the motor will allow for the movement, or by attempting to remove the motor from the regulator to free up the geared arm. 1aauto.com
1A Auto Parts thanks for the reply
Kreig Marzolf I applied power straight to the motor from the two pin prong and reversed polarity till I raised my window
What if it's stopped completely at the top (closed) position?
I had this problem, I just removed the speaker and used the hole to access the bolt, I used a wrench and it was tedious but it worked.
Great Vid:
Question: Why did you remove the door handle. I have replaced many regulators in the past on a Camry 1999 and never had to remove the door handle?
There is no need to remove door handles, so yes your correct, I did all of my 4 doors on my camry without needing to take out door handles, it’s just unnecessary work to do
To film it obviously
Do you have a video for the rear passenger window replacement or is it basically the same?
+A'mazing86 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
Great job.
Nice content thanks dude 👍
+DeeJae Davis Thanks for checking us out. 1AAuto.com
Good job
Do you have a video for the rear or just the front?
+@KentuckyWoman2 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Thanks very much for the great video-
I enjoy watching your videos but you always show a window regulator that works which is not what we have to do with when we're changing the regulator
very good video, thanks
+david nguyen Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/search?q=window+regulator&year=1998&model=384
Awesome video. I am doing this today on my 1999. Thank you.
Thanks for checking us out. 1aauto.com +Pirate Labs
So my husband recently replaced the window regulator in our car but now I get a lot of wind noise. I’m assuming it’s the window run that needs to be replaced or is there something we can do to adjust the regulator for a more snug fit ?
+Stephanie Salazar We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Is there any difference between the front and back window Regulator installation ?
+torawfordiz The installation of the parts should be very similar.
What if u can’t roll the window down? How is it possible to expose the bolts to separate the window from the regulator?
How do get the metal rod onto the track
what if I dont have white lithium? is there anything I could use that might be laying around the house instead?
+Corbin Jaksich Any type of penetrating oil will do. WD-40 is always a classic! 1aauto.com
Use some WD/40
Is the plastic liner necessary
how do I replace the motor and regulator when the window will not roll down? Please help it is the drivers side door and very inconvenient. Thanks for your assistance
+Mongo 549 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
Will this work on a 99 camry drivers side door? After watching this I see that my power window switch is slightly different. Only has 1 plug harness, not two. Thanks!
I just finished doing the driver's door window regulator and motor assembly on a '99 Camry. Yes, there's only one big electrical connector for EVERYTHING!
Also, when you take the screws out of the underside of the armrest on the door panel, there seems to be only the rear two, not three. On mine, the front underside armrest trim panel area had the hole FOR the front screw. However, with a flashlight, I saw no screw OR any hole for it to go into the steel structure of the door.
I replaced the window regulator and motor. What if the problem is electrical, where do I go to fix that problem?
What if the window is stuck al the way at the bottom
+Surprise Inside We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thank you!
+gyff jogofl Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/1997-01-toyota-camry-window-regulator-passenger-side-front/i/1awrg00093?RUclips&CTA+Comment&XibsbgpEWM
My window regulator works fine, but the window came out of the clamps on the bottom rail that pushes up the window. When the window rolls up, it sticks to the top of the window frame and then falls back down inside the door. I'm thinking of gluing the window back to the clamps on the bottom rail with some urethane. Anyone have any thoughts?
Will a 1997 toyota camry windo mortor fit a 2002??
+Gilbert Gomez No, the 1997 will not fit the 2002 models. Thanks for the question.
How do I get it out if the window motor is dead?
+J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟ This video will show you how to remove the window regulator from the door. 1aauto.com
Did you find out? I have a 98 camry and driver side won't budge so will I be able to access bolts? Don't want to take panel and all apart without knowing
What happens if it’s inverted
I replaced my toyota camry 2000 front passenger regulator.Now the windows moving(up and down) is reversed.Please help.Thank you.
+KGA Thank you for the inquiry! Have you tried switching the pins?
@@1AAuto Sorry. Could you please tell me more details about how to switching the pins. I checked all the connectors,they are only one way to connect. Do you mean that cut off the wires and reverse the wires ?
Great video! I have a question that you may be able to help me with. I drive a 2010 Toyota Rav4 and when I was powering my window, I heard something metallic sounding fall downward inside of my door. Then afterwards when I lowered my window I noticed that it was tilting abnormally downward. Any idea what may have happened and how to fix it?
+Tony Gruber That is very typical of vehicles with broken window regulators. You can inspect yours to see if it has failed. Thanks! 1AAuto.com
1A Auto Parts Okay, thank you. Am I able to just replace the regulator or will I have to buy the motor and regulator as a set?
You missed a push pin and right angle bracket on the right side of the door. Perhaps you lost it during a previous video.
wow! a bolted in regulator. GM could learn a thing or two
what if the window is stuck closed??
Remove all the bolts that hold the window regulator to the door. Wiggle the regulator free from the door.
The window should now come down. You will then need to remove the 2 window bolts using a 10 mill
socket and ratchet and/or a ratcheting wrench. Move the window around until you get it into a position
that these 2 bolts can be accessed.
Really funny. My window motor is busted, so I need to remove it. But cant do it because I would need a way to lower and raise window. Ductaping the window shut then..
he lost me when he took the bolt out of the door handle opener,
If the motor is gone you can't roll the window up smh. This helps me none. Thanks
So replace it
What if the window is in the all the way down position and can’t move it