How to Replace Front Window Motor & Regulator Assembly 2012-2017 Toyota Camry

Поделиться
HTML-код
  • Опубликовано: 5 сен 2024
  • Buy Now!
    New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ib/1AWR...
    This video shows you how to install a front window motor & regulator assembly on your 2012-2017 Toyota Camry. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
    This process should be similar on the following vehicles:
    2012 Toyota Camry
    2013 Toyota Camry
    2014 Toyota Camry
    2015 Toyota Camry
    2016 Toyota Camry
    2017 Toyota Camry
    Tools you will need:
    • Phillips Head Screwdriver 1aau.to/oa9C/1A...
    • 10mm Socket 1aau.to/oaUN/1A...
    • Trim Tool Set 1aau.to/o2y/1AX...
    • Gloves 1aau.to/oIV/1AX...
    • Painter's Tape
    • Safety Glasses 1aau.to/oCw/1AX...
    • Razor Blade / Gasket Scraper 1aau.to/ohR/1AX...
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 5

  • @TRQ
    @TRQ  Год назад

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @chanu23
    @chanu23 Год назад +3

    my window is not going up and down.
    so how can i go up and down to removed the motor or regulator ?

  • @billm5215
    @billm5215 2 месяца назад

    Question? Why are you replacing a motor that appears to work fine up and down???

  • @OverkilledUnderdog
    @OverkilledUnderdog 3 месяца назад

    Almost good. The step at 5.57 is incorrect. You do need to completely remove those screws BEFORE powering up the window glass. The glass will still be kept in place and in position.

  • @topherd1011
    @topherd1011 Год назад

    So did someone let this car get flooded or something? It’s a pretty rare thing to have to change a lock actuator in the back AND a window regulator in the front…