Các bạn trẻ tuổi mà đã làm được như vậy thì quá xá giỏi thêm vài tuổi nửa chúc các bạn luôn giữ đượ ý chí lớn để chế tạo thêm những món đồ làm cho tên Việt Nam sáng rực trên thế giới
2 года назад+4
Cái máy củ rít mà làm nên chuyện,kỹ sư nước ngoài khóc thét khi xem những thợ thánh chế 🇻🇳 phục hồi máy cũ👍🌾
Tôi ngưỡng mộ bạn vì đã biến những thứ tái chế thành những thứ có thể sử dụng được .... và những thứ tái chế có thể biến thành vàng nếu bạn biết tận dụng nó. Tôi đến từ Malaysia.，👍👍👍
My idol mr ho.. the best junk yard solver... a mechanic... a painter... a builder a racer... keep up your good work it blows my mind.. a plenty of ideas from you.. someday i can make like your talent... from cebu philippines more power to u mr ho.... thanks.. mabuhay.....
The level of expertise just being able to strip that engine down to its bare bones, refurbish every detail and then rebuild it… blows my mind!! Let alone rebuilding the entire chassis. Expert level!! I thought watch makers were mind blowing to observe… you take it to a whole other level!! 👏🏼
Quá trời đẹp ,qui trình rất chuyên nghiệp, sạch sẽ,tỉ mỉ tới từng chi tiết như 1 nghệ sĩ sáng tạo nghệ thuật. Mỗi dự án của em là 1 tác phẩm nghệ thuật, rất trân trọng khán giả...Chúc em luôn sáng tạo ra nhiều sản phẩm nữa !
Great build, that thing sounds awesome. Love how you made the bigger platform at the back. You could add rod holders and a small cooler. The possibilities are endless!
There’s a lesson to be learned in this video, this guy rebuilt a scraped engine without hesitation and end up better than the original, the lesson here is not to be wasteful and just throwing everything in the dump
This is super impressive! The entire restoration process must've been extremely time consuming but very glad to see that all the time and effort really paid off. Can't wait now to see what project you'll do next with this engine!
Romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved. For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation.
Se trouxer ele pro Brasil, ia dar aula aqui, e ficar rico , porque aqui falta gente profissional assim, os daqui só querem grana, mas mal sabem fazer o serviço decente. Kkk
Những người trên toàn Thế giới Họ rất cãm phục Cháu Phải hảnh diện là người Việt Nam..Sự kiên nhẫn cần cù.. Và nhất Là thông minh..sáng tạo..khó hơn Phi thuyền bay lên cung trăng,, sao hỏa..
You are a inspiration to a lot of people Mr.Ho! I cannot believe some of the things that you can bring back to life!? You have an incredible amount of patience. I am going to try a build of my own with an old electric Bike and a commercial edger motor...you have inspired me to step out of my comfort zone and put my brain to work.
I’ve gotten hooked on his vids, the guy literally has some amazing skills. Just curious how much would a good welding helmet cost for you, I get worried about your eyes when I see you weld.
@@THANHTRAN-me4yx yeah, but a good helmet or cheap face shield would mean he could directly watch for a better and more controlled weld, because he could directly observe it as he was doing it. . . . . . instead of looking away at each touch.
Awesome work I LOVE your works so much with innovative ideas to free the scraps too, preventing the planet get polluted and loved your work. SPEECHLESS!!!
The amount of effort you put into these builds is commendable at least. Amazing job, love your videos :) One mans junk into another mans jewel, Keep up the amazing work.
Unbelievable!!! I too got a triple back going few years back. I know the work it takes, but simply amazing with what you made out of what you started with.
Very cool, I was on the edge of my seat when you cut the body but faith restored with that longer flat tail. Turned out better than it probably looked when it was new.
i´ve watched a lot of your videos and your skill is getting much more higher over the time. Nice to see that use more and more new parts to give the machine a much longer lifetime. Go on in this way. 💪
I don’t know if I’ve ever been more impressed by the skill, knowledge, ingenuity and all out pure drive of one human being in my entire life. Dude you are an absolute beast and I’ve never been so blown away by one human’s ability to just do it all.
People like this go against the grain of fear and doubt. Even with all the factors and possibilities for failure, sheer will and determination sets apart those who "can do" from those who "can't do". PS I really enjoyed this build.
Bạn chắc chắn là thợ làm máy rất lâu năm nhiều đầy kinh nghiệm và rất tài giỏi. Nhìn thôi tôi cũng thấy chóng hết cả mặt rồi. Chúc bạn luôn vv hp và tạo ra đc nhiều tác phẩm tốt cho tương lai 👍
Well done Sir, I salute you ! I wish that you could work for me and that I could show you just a few things that would make your work even better. I have been a self-employed design engineer for 45 years and spent most of my time carrying out one off things, a bit like this ! - including mostly fixed wing aircraft and helicopters, together with LOADS of engine, car and other restorations. The very best of luck with your exploits and greetings from North Wales, UK (Near Chester). Take care, Mike
HO is a genius....the guy needs to be here in the U.S. He is a Mechanical Engineer who doesn't take a back seat to no one...Another great job! Just amazing...
The amount of effort and quality workmanship went into this build is amazing. This is how we should be recycling our cars and motorbikes.much respect to you Sir !!!!
The amount of time, effort, and craftsmanship you put in to this incredible restoration is absolutely mind blowing. The finished product is absolutely fantastic.
You can be so proud of yourself, again you did such a Great job. That words are too few, for the time and the afford you made. It's brave to do a job like this. I think there are not a lot off people in this spoiled Society Will do. But you did... Big thumbs up mr Ho.
Wow....!!!!! 😲😳 What an inspiration from start to finish Mr.Ho Man..! 🙏 You are a total Genius no doubt . And your level of enginuity is off the charts..! Thank you Mr. Ho I hooked and have just SUBSCRIBED to your channel...👍 Also, your video editing is also incredible..! 5 Star ⭐⭐⭐⭐⭐ Rating
Mr Hồ :Bạn Thật Thoòng Minh và Tuyệt Vời , Chúc Bạn Nhiều Thành Công Sự Nghiệp và May Mắn trong Sáng Kiến và Chế Tạo giúp ích cho Xã Hội và Quốc Gia
3 Things I like about this video:
1. No commentary , just you and the build.
2. You recycle stuff
3. The finish build is so satisfying.
Just imagine what Mr.Ho can do if he had a day in one of the scrape yards in America. Bro could probably build a tank
Haha. I think he can build a tank😁
@@Dinhmanh96 he even can do a new Space Station
Or an F16 who knows…!
He could turn trash into other trash! Amazing.
This didn't take a day
Các bạn trẻ tuổi mà đã làm được như vậy thì quá xá giỏi thêm vài tuổi nửa chúc các bạn luôn giữ đượ ý chí lớn để chế tạo thêm những món đồ làm cho tên Việt Nam sáng rực trên thế giới
Cái máy củ rít mà làm nên chuyện,kỹ sư nước ngoài khóc thét khi xem những thợ thánh chế 🇻🇳 phục hồi máy cũ👍🌾
😅😮😮9
Tôi ngưỡng mộ bạn vì đã biến những thứ tái chế thành những thứ có thể sử dụng được .... và những thứ tái chế có thể biến thành vàng nếu bạn biết tận dụng nó. Tôi đến từ Malaysia.，👍👍👍
Sejak bila malaysia ada org thai? 😁😁
Is the very good technic
Tôi đến từ Malaysia hay là Tôi là tác gia mình tự khen mình để câu like
Awesome.....great job and skills...
My idol mr ho.. the best junk yard solver... a mechanic... a painter... a builder a racer... keep up your good work it blows my mind.. a plenty of ideas from you.. someday i can make like your talent... from cebu philippines more power to u mr ho.... thanks.. mabuhay.....
The level of expertise just being able to strip that engine down to its bare bones, refurbish every detail and then rebuild it… blows my mind!!
Let alone rebuilding the entire chassis.
Expert level!!
I thought watch makers were mind blowing to observe… you take it to a whole other level!!
👏🏼
yea this dudes crazy good probably it would take me a week just to take that engine apart lol
Quá trời đẹp ,qui trình rất chuyên nghiệp, sạch sẽ,tỉ mỉ tới từng chi tiết như 1 nghệ sĩ sáng tạo nghệ thuật. Mỗi dự án của em là 1 tác phẩm nghệ thuật, rất trân trọng khán giả...Chúc em luôn sáng tạo ra nhiều sản phẩm nữa !
A hồ tạo ra những sản phẩm thật tuyệt vời, chúc anh luôn thành công với những kiệt tác mà anh chế ra. 🇻🇳 Triệu like
your every videos so satisfying to watch. Keep make video like that type. Excellent rebuild skill
I couldn't wait to hear that triple 2-stroke fire up. Thank you Mr HO for another fabulous and inspirational project.
JANGAN LUPA BAHAGIA juragan..,salam dari indonesia..sangat kreatif
Your the man! Good lesson for everyone how to make use of the recycle. Don't waste.
Bạn thật sự tài năng. Từ làm đồng, sơn, nội ngoại thất, điện, hàn, chế, kết nối, nhưng nhất là khâu làm máy. Đỉnh của đỉnh.
Would love to see a documentary on this guy..his back story and some coverage of some of his builds.
Great build, that thing sounds awesome. Love how you made the bigger platform at the back. You could add rod holders and a small cooler. The possibilities are endless!
A 50 cal machine gun and a bimimi top woulda been more in keeping with the location.
a wood fire pizza oven and an icecream machine would be a good option too
And jacuzzi
There’s a lesson to be learned in this video, this guy rebuilt a scraped engine without hesitation and end up better than the original, the lesson here is not to be wasteful and just throwing everything in the dump
Or go to the dump in case you want a new toy 👌
Not always applied, sometimes working in a day can be easier to get a new toy than spending too much time and effort to fix it.
Did you really just say this engine ended up better than original 🤦♂️ what a stupid saying
all you need is brain to put it together 😂
Throw more near this guy's house 😜
This is super impressive! The entire restoration process must've been extremely time consuming but very glad to see that all the time and effort really paid off. Can't wait now to see what project you'll do next with this engine!
Romans 10:9-10
That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved. For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation.
Your restoration and skills are second to none! Great work Sir.
Se trouxer ele pro Brasil, ia dar aula aqui, e ficar rico , porque aqui falta gente profissional assim, os daqui só querem grana, mas mal sabem fazer o serviço decente. Kkk
Damn, I was fully expecting to see a junk yard built jet ski, I was not expecting to see something you'd see on the showroom floor!
Những người trên toàn Thế giới Họ rất cãm phục Cháu
Phải hảnh diện là người Việt Nam..Sự kiên nhẫn cần cù..
Và nhất Là thông minh..sáng tạo..khó hơn Phi thuyền bay lên cung trăng,, sao hỏa..
You are a inspiration to a lot of people Mr.Ho! I cannot believe some of the things that you can bring back to life!? You have an incredible amount of patience. I am going to try a build of my own with an old electric Bike and a commercial edger motor...you have inspired me to step out of my comfort zone and put my brain to work.
Good Luck!!!
Nhiều linh kiện vậy mà a ráp lại dc hết chỉ nói là đỉnh của đỉnh
Молодец, руки из нужного места ростут!👍🤟
I’ve gotten hooked on his vids, the guy literally has some amazing skills. Just curious how much would a good welding helmet cost for you, I get worried about your eyes when I see you weld.
he close his eyes while sparkling welding !
@@THANHTRAN-me4yx yeah, but a good helmet or cheap face shield would mean he could directly watch for a better and more controlled weld, because he could directly observe it as he was doing it. . . . . . instead of looking away at each touch.
@@shakeval đó là mẹo của anh ta và thấy dễ dàng khi hàn
@@DuongPham-mg9ps đó không hẳn là một thủ thuật, chỉ làm cho mọi thứ trở nên khó khăn hơn.
I've literally got two I don't even use anymore I could send him, give me your address, i'll ship them to ya @MrHo
I am Vietnamese and also live in Vietnam. I am proud of people like you!
Trabalho muito profissional e perfeito de verdade 🇧🇷🙏❤️
Mới chạy ngang nhà thấy đậu 2 chiếc ở cập bờ sông luôn 🥰 tuyệt vời
Thành Công. Mr Hồ ở đâu bạn nhỉ?
Bạn rất giỏi. Sản phẩm làm ra rất đẹp. Có một công việc mình yêu thích, thật tuyệt vời 👍👍👍
Настоящий мастер, слов нет. Вот что такое золото нации, люди с золотыми руками 💪
Awesome work I LOVE your works so much with innovative ideas to free the scraps too, preventing the planet get polluted and loved your work. SPEECHLESS!!!
The amount of effort you put into these builds is commendable at least. Amazing job, love your videos :) One mans junk into another mans jewel, Keep up the amazing work.
Unbelievable!!! I too got a triple back going few years back. I know the work it takes, but simply amazing with what you made out of what you started with.
how the hell in the earth you remember all those part & components.. Respect🔥
Very cool, I was on the edge of my seat when you cut the body but faith restored with that longer flat tail. Turned out better than it probably looked when it was new.
Greetings and Happy New Year from Portugal. Fantastic skills and job.
1 chàng trai tuyệt vời!!!!♥️♥️
Muito bom, legal Maravilha essa restauração 👏👏👏👍🇧🇷🇧🇷🇧🇷
i´ve watched a lot of your videos and your skill is getting much more higher over the time. Nice to see that use more and more new parts to give the machine a much longer lifetime. Go on in this way. 💪
Nothing like an old two stroke. Love those motors
I don’t know if I’ve ever been more impressed by the skill, knowledge, ingenuity and all out pure drive of one human being in my entire life. Dude you are an absolute beast and I’ve never been so blown away by one human’s ability to just do it all.
People like this go against the grain of fear and doubt. Even with all the factors and possibilities for failure, sheer will and determination sets apart those who "can do" from those who "can't do".
PS I really enjoyed this build.
Bạn chắc chắn là thợ làm máy rất lâu năm nhiều đầy kinh nghiệm và rất tài giỏi. Nhìn thôi tôi cũng thấy chóng hết cả mặt rồi. Chúc bạn luôn vv hp và tạo ra đc nhiều tác phẩm tốt cho tương lai 👍
Ficou sensacional de verdade que trabalho lindo "Brasil
YOU ARE THE BEST OF THE BESTS, THANK FOR YOUR VIDEO
Anh tràng này thật tuyệt vời..khâm phục..
I have watched many Jet ski rebuilds on RUclips and Mr. Ho is by far THE BEST!
Крассавчик👍 ты не перестаёшь удивлять своими роликами, так держать🤘 "художник творит"...
انت تملك روح جميلة وقلب صبور لديك همة عالية اصابعك تصنع شيء جميل جعلت الجماد يتحرك والقديم جديد
Когда руки растут откуда надо, класс 👍
Восхищён вашей работой👏👏👏
Mr. Ho` your work is incredible 👏
Quá tuyệt vời. Mr.Hồ thích kênh bạn...👏
Tôi tự phục hồi và chế lại jetsky từ đống phế liệu. Rất tuyệt vời mình like và đk luôn đồng hành cùng bạn.
Meinen Respekt Mr. Ho ! Sehr gute Arbeit und ein sehr guter Mann!!Viele Grüße aus Deutschland!
Well done Sir, I salute you ! I wish that you could work for me and that I could show you just a few things that would make your work even better. I have been a self-employed design engineer for 45 years and spent most of my time carrying out one off things, a bit like this ! - including mostly fixed wing aircraft and helicopters, together with LOADS of engine, car and other restorations. The very best of luck with your exploits and greetings from North Wales, UK (Near Chester). Take care, Mike
Hello
P0ooppppppppp
Pppppp
Hello Mike, kindly send me your email address
He's one smart guy. Well done mate. Brilliant job. Thank you so much for the videos.
Anh rất giỏi về khôi phục máy và chế tạo
Truly talented and so anti-waste. Love it.
Your so cool dude,that engine looks really confusing to put back together, and u do it easily, wow✊✊
Mr Ho is the Bruce Lee of Engineering.. It just hard to believe how much he can do..
Mr. Ho, you are the boss👍thanks for sharing
The rear seat should be extended a little longer for beauty and made a groove to catch a hole. Save it for the time you get on the boat.👍👍👍
Q motor top, sou fã do motor 2 tempos. Parabéns. 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
HO is a genius....the guy needs to be here in the U.S. He is a Mechanical Engineer who doesn't take a back seat to no one...Another great job! Just amazing...
This is absolutely amazing! to destroy something is easy and takes seconds. To repair and create is an art. Thank you Sir!
Muchas felicidades eres un exelente constructor he inspirador
You need a sand blaster with a cabinet to save time on sanding. Great work!
Poor country that the best they can do
Full rebuild, no multi part series, 4K, and no cliff hanger! I like this channel!
Cậu em thật đa tài. Chúc em thành công và mong là sẽ được xem em tự chế, phục chế nhiều loại độc đáo hơn như trực thăng...
Assisto todos seus videos… fascinante 😍
Finally! You have a really good jet ski! )) Nice job, man!
Nhìn theo đôi bàn tay đang làm việc cũng không kịp nữa quá xá trời là đẳng cấp.
Your ability to make something beautiful from scraps is amazing.
The best thing is that he looks so happy at the end 😃
Gangsta!
Anh làm hay quá
anh thử làm xethanhchiếcthiềnđiaạ
Awesome job, love the hull redesign, makes me want to build another waverunner now
Dont forget to make the video too
I admire his ingenuity on bringing back scraps to life. My kind of Guy Mr. Ho!
You are one talented guy!! I am so impressed with your work.
Корпус восстановили неплохо. Но вот ремонт двигателя без замены подшипников коленчатого вала это диагноз!!!
А внутри пакистан)))
Но Камаз в конце я не ожидал увидеть.
The amount of effort and quality workmanship went into this build is amazing. This is how we should be recycling our cars and motorbikes.much respect to you Sir !!!!
You're the best Mr. Ho!
God bless you!!!
Круто всё получилось шедевр задумки этого чувака не безграничны грамотная работа всё безупречно супер продолжай в том же духе 👍
The amount of time, effort, and craftsmanship you put in to this incredible restoration is absolutely mind blowing. The finished product is absolutely fantastic.
In Vietnam we don't have any machines we can't fix
Hi Lee. That is so true.
@@lee-wr3wxbạn rất tự hào là người vn, nhưng tại sao lại lấy họ tên lee của lũ tàu cộng tập cận bình, kẻ thù mãi mãi của dân tộc vn
Ficou fantástico.. meus parabéns 😃
Super work, such a pleasure watching folks recycling and building cool stuff, this is frikken awesome!
You're a genius! I love to was all your videos. Keep posting. Keep safe and healthy.
What a nice job you did! Congratulations... People like you would be very popular here in New Zealand!
your skillz always amaze me, great work i love watching your videos, endless ideas!!!!
Outstanding restoration. You sir are very talented indeed.
You can be so proud of yourself, again you did such a Great job. That words are too few, for the time and the afford you made. It's brave to do a job like this. I think there are not a lot off people in this spoiled Society Will do. But you did... Big thumbs up mr Ho.
Cara muito bom parabéns!!!!!!!!
Who doesn’t love a piston ported two stroke?
Another beautiful creation by Mr. Ho....
Thật là đáng nể phục anh! Anh thật tài năng.
Fantástico seu trabalho parabéns ficou excelente
Wow....!!!!! 😲😳
What an inspiration from start to finish Mr.Ho Man..! 🙏
You are a total Genius
no doubt . And your level of enginuity is off the charts..!
Thank you Mr. Ho I hooked and have just SUBSCRIBED
to your channel...👍
Also, your video editing is also incredible..!
5 Star ⭐⭐⭐⭐⭐ Rating
xem video anh này sướng thật ,anh thông minh đẳng cấp quá
Chúc cho Đức Thật nhiều sức khỏe.