Budget Build with 8 15" SUBS Part 7
HTML-код
- Опубликовано: 9 ноя 2022
- HUGE thanks to D4S for sending me this JP234 to try out! Check out the link to it below.
D4S: lddy.no/1djtu
Links to this INSANE Deal on the American Bass Elite 15s!
Amazon: amzn.to/3d9pb2X
eBay: ebay.us/raZsO4
BigJeffAudio: bigjeffaudio.com/r?id=l5o985
Support the basshead family by checking out my affiliates!
D4S: lddy.no/108an
BigJeff: bigjeffaudio.com/parkerthebas...
G2: g2daudio.com/?ref=parkerbasshead
CT Sounds: www.ctsounds.com/?ref=parkerb...
Check Out My Socials!
IG: parker_the_...
FB: / parker-the-basshead-of... 
Авто/Мото
I'm 70 years old and not really interested in bass thumping. But....I love this channel! You are always smiling Mr Parker and you are really into what you are doing! Thank you for bringing your knowledge to all of us and keep up the good work!
Thank you Richard!! It means a lot
This is the coolest thing I have seen today!
i am like this with things i really am not interested in as well... i just like to learn... ya brain stays young when you keep feeding it
@@ParkerTheBasshead hey Parker what was the link to where you found your batteries or cells and your buss bars
@@ParkerTheBasshead hey Parker, so I remember you thinking that DC woofer ya got was a bit overpriced when you consider the performance you get for the money lol-ol-ol well I just got a DC NEO ELITE 4-18in D1ohm delivered yesterday and man o man is she sexy!!! Apparently it is the biggest and baddest sub that DC makes and it certainly is wayyyy overpriced the damn thing cost $2,500+ for ONE WOOFER!!! Thankfully I actually won it from a DroppinHz waffle because I don't care if they plated it in 24k gold or pure platinum there is no way in hell I personally would ever spend that much on a single woofer I mean sure it's badass, weighs 80lbs of neodymium with 4in 8 layer PE flat wound coils rated 4.5k rms but man that's a whole lot of money when you consider I bought pair of Wolfram PT-18's that also have a 4in PE coil and 4k rms each for $650ea lmao I could buy 4 of them for the price of this one subwoofer and I'd bet you anything that the 4 Wolfram PT-18'S would be significantly louder than one NEO 18 ever could! But hey I'll take it for free 😝🤣🤷♂️ granted I'm likely stuck with it for life because I can't really see anyone spending what it's worth to buy it from me on top of the orig price it also has a custom colored basket and matching dust cap so I'm guessing it was somewhere close to 3 grand!!!
When you connect a pack out of cells like that you need to have a BMS, to ensure proper charging and discharging, because if those cells become unbalanced, either over or under charged, it will cause a HUGE problem. I'm not a Car audio expert, But I do deal with Lithium Cells a lot, including Lifepo4, the type you are using. They wont explode like Lithium ION, but they will release unsafe gasses and get VERY HOT.
I've never seen a battery set up like that, definitely looks badass. Gettin so close my guy
Dude, Dude. You have a passion that just rocks man. I love your builds. The best part of all of this is watching where you came from and where you’re at now. Keep building and bassing
It’s all coming together, nicely done Parker. Keep up the great work, love your videos
I've learned everything i know from you, parker! I truly appreciate it!
Awesome video! Been looking to go lithium for a while now but those prebuilt lithium batteries cost an arm and a leg. This has opened my eyes to much cheaper options. Thank you for this great content!!! 👍👍👍
Just binge watched part 1-7. Love this channel. Keep up the good work Parker!
I appreciate it man!! Next part will be out in the morning
@@ParkerTheBasshead how can someone contact you
Looking great Parker! This is gonna be a rocking setup, great job!!
I wish I had the opportunity to do like you do and share it with the world !! the main reason I always watch your vids is because you are genuinely excited and 100 percent honest about your love for bass .... keep it up my brother in bass 💯 keeping frequencies low and vibes high 🙌😃
Michael you do have the opportunity. We all do the best part about it you can get started with a little to no money and minimal efforts. We can do anything we put our mind to.
You got that big bank energy!
Man, I wish I knew what I was doing when I first installed my set up lol, I just need to get a newer head unit to properly run all my speakers into the 4 + 1 channel amp I'm running.
I just got that JP234 and I love it. The only downside of it is that the clip light is on the opposite side of the amp than the adjustment knobs. I ended up just using my DD-1 but if I didn't have that I would have been stuck using a mirror when making the gain adjustments
I live for learning about bass and how you do it. I love the videos and love me some bass. Looking good so far🔥🔥
love the bank!! and the teasers!! keep it up bro your gonna get that 100K subscribers!
You may want to spread out your power and ground wires to distribute the load across more cells. The way this is set up the cells closest to the power wires will see dramatically more stress than the cells farthest away.
Hell yeah Brotha the build is coming out good! Can’t wait to hear it 🔥👍🏾
Rock on Parker this series is gettin good
Great video love watching them all Parker!!!!
Coming together good can’t wait until the test
Loving the progress!!!!
Great vidja as always Parker keep it up
Love this channel you can learn so much
Loving this build.
I'm still catching up on your videos, I'm a bass head also and a big fan... Keep bumping 😎
I've also got a bunch of headways. The active balancers I've tried sucks. Bought an icharger x6 n just balance now and then to keep em healthy. Also, they get damage when used under 32 deg unlike other lithium chemistries. Just another toy to keep my cheap ass batteries healthy lol stoked for the next one Parker
Thank You! Another great vid!!
Looks awsome brother can’t wait to hear some serious bass from those baby’s
Nice work on that headway bank man.
😎👍👍
Keep up the good work bro love the channel
It’s coming together very beautifully love the content
Thank you!!
@@ParkerTheBasshead if you don’t mind I need to ask how much did all of that bank run you?
I have give a Shoot out to Parker the bass head. Great videos keep up the good work ... I've been into car audio all of my life
It's going to be awesome stay up an stay Bassin brother 🔊🔊🤙🏼
I really enjoy your channel keep it up.
love the build man
Nice battery bank I can’t wait to see this setup in action.
Thanks man!!
Setup looks bad ass! That is a dream build👏💯
For real!! I’m very blessed
Looking really good.
Good videos bro love from New Zealand 🇳🇿
Nice looking build there I may say keep it up.
Parker been pimpin since pimpin was pimpin.....pimpin
Man! Looking like you might blow out one of the windows with this build Parker 👀 😁,!
Nice I definitely need a battery bank someday. Your batteries look good 👍
Nice battery setup. Keep up the good videos.
My CRV needs that sub! I hate stock audio and I just cant afford a sub right now with a baby on the way. LOVE this budget series though, great for bass heads who dont have thousands to spend on audio. I will just copy this build but cut everything in 1/4 lol
Its going to be a great set up love it
Thanks for the video. I'm thinking of building a nice lithium bank like that one.
Great job brotha that battery bank is super clean we need BASS tho just a lil hit man lol
build will be insane 👀
Can't wait to see it finished
Me either man! We are getting close
Your videos are always amazing
Really appreciate it!
Do the 2 taramps 8ks on subs and the big jp on the mids and the smaller jp on the Highs with the taramps smart sp to tune them all
I wanted to build a headway battery for my car, but the high output alternator I bought charges a little too high. 15v cold and 14.8v warm is a little more than I wanted to run since one of my batteries are bad and probably pulls it down more than a lithium bank would. AGM will work just fine for me though and should last until my next car, then we can go lithium!
340a alt on an xs d2400 (coming soon) and d1200 for a 5k and 600. I think it’ll handle it.
Not gonna lie Parker when you seen the ruler spark give me a little bit of a laugh
Good job on your system brother
Need that sub in my 2018 malibu
When you ran that tape measure from the + to the - terminal I puckered up a little bit😂 careful with that bad boy, if my math is right that sucker is capable of 4,000 amps continuous discharge. ⚡️🤯⚡️
I second this I work with lithium batteries daily and you gotta be careful when doing that. Usually when we arc a cell we consider it scrap.
Nice video! loved the spark but definitely need to protect/cover those plates man that makes me nervous. only takes 4 of those headway cells to start a car! those are no joke. BE CAREFUL BRO
nice bars. i got 96 ah headway bars from coventry about a month ago, high quality
Yes they are excellent!
I'm banned on Facebook for another 6 days lol so gotta wait to like your Facebook page Loving the videos bro good inspiration for my build and I'm learning all the stuff I didn't know!!
That bank is massive I I wish I had the room and money for that!!!
I have one 64ah bank with proje r sb busbars now i have my second set of bars and waiting on my cells to build the second bank Headway ftw
Always majorly life motivational.....
I've read all kinds of stuff on those single lithium cells how hard is that on your alternator and did you have to do anything to the regulator on it to keep from overcharging the lithium pack? If memory serves me correct those are 3.2 volt cells? as opposed to the lithium ion that are 3.7 volt cells. The reason I bring up the regulator and overcharging I used to build packs out of 18650 cells and if you put more than 4.2 volts into each one of those cells they will get hot and explode and when I say explode it's more like hooking a capacitor up backwards the case blowing off of it and it's going to dent something or put your eye out.
hey bro thnx I can't wait for the next video
Bad ass video bro
Beautiful lithium bank!
Lovin the videos bro thank u
Thank you!!
Love the content
pretty happy with my jp234, and 33, but the bass knob is kind of sucking compared to the standard wired with clip light.
Just ordered my first set of cells
Very nice bro!
You’re looking like He-Man with all that Power
Hahaha!
Good job . I hope you hit at least 160+ db.. I wonder if you still will get any type of voltage drop ??
Thinking of trading out my memphis mini mojo 8 in the factory enclosure I put in the extended cab of my truck for a custom built box and one of those American bass 15s ....just wonder if it will preform as well ....the mini mojo 8 surprises everyone when I turn it up ....but I am running around 1100 watts to it sometime a tad more ....using a skar rp 1500.1 to run it but I may use a jp23 to run the 15 if I go that way ....just always like to build my own enclosure....first time in 20 years I didn't
I have two of those jp234’s in my Build one on mids one on hi’s and They healthy!!!!
This help me out alot
I was building my 96ah and scared the shit out of myself when I had it arc on me touching the positive and negative lol
9:28 😂 Never not surprised! … Respect the power of the spark ⚡️ 😂😂😂😂
Just let me get that 3k on the wall and enough to buy 2 sdr 18s....got plans to put it in a 06 Acura TL with the 2 6" ports thru the back dash.
Great vid bro...
Is a BMS necessary?
SWEET!!! Im building a 128ah which balancer would I need and how to wire it
Thanks parker!!!!!
Yessir!!
Can anyone shed some light on that headway bank? About how much would it cost to build that 160ah bank of headway? Also, how does the headway cells compare to yinlong? Thanks! I've been watching your vids for awhile now and realized I wasn't subscribed, glad to say I am now! Thanks for the videos, Parker.
Sick! I have 192ah of lithium and have been thinking of going Coventry but $500+ is steep for me especially this close to Christmas!! Link to bms you got?
Wow that's impressive 👏
Is this for real Parker?
Hey parker got you subscribed on both my accounts love the videos I got a question I didn't see nobody ask did you ever think about building in selling these batteries for people or can people request for you to make one for them?
Nice headway battery you could jump start a concert
Not too far off of thhe 80k now. Keep up the great work and Content
Nice build
I appreciate it!
Hey Parker. When & where is the next subwoofer flex festival in USA?
Hey Parker how can i wire two 64ah headway batteries in parallel
wow, looks so cool 🤩💯💯💯🔥🔥🔥🔥🔥
i need that 4 channel bad...mine just went out lol
What charger is that and keep up the good content
Parker, I want to build a lithium bank for my 1200 watts system I was wondering what you would run? Kicker Comp R 12’s and matching Comp R Amp..
Love the build man, but PLEASE insulate those wires and don’t leave them sitting across the battery rails like that. It would not take much for the wire insulation to wear through and then you have a direct short which will catch fire!!! Lithium is amazing, but you have to respect the power and build it safely.
I recently built a battery using 76 eight amp/hr pouch cells that are capable of up to 400 amps each! I took my watch and wedding ring off while I was building it. A 1/0 wire can flow a LOT of current before it melts!!! PLEASE be careful. I want to see how this turns out, and future projects too.
Where can I find good info on building these cap banks? I’d like to do a much smaller one
Hey Parker do you have any of the 12v battery busbars that look like a battery you were building?
This is absolutely awesome and totally inspiring
Thanks man!! 💪🏼
Parker hey sir I heard you say once that you need to get rid of things there and I was wondering if you had any head units because I wanted to trade you a brand new VFL 4800 AMP SERIOUSLY NEVER BEEN TAKIN OUT OF BOX I GOT IT FREE AND DON'T NEED IT AND I WENT TO AMERICAN BASS TO LOOK IT UP IT HAS A VERY VERY NICE BASE NOB BUT LOOKING FOR A GOOD HEAD UNIT!!!! GREAT VID'S GREAT BUILDS KEEP THEM COMING THANK'S FOR YOUR TIME SIR !!!
Where did you buy the cells and balancer from?
Got the cells from battery hookup and balancer from Heltec on Amazon.