How To Solder SMD with Solder Paste
HTML-код
- Опубликовано: 6 авг 2024
- Today class is about how to solder SMD using solder paste for electronics. Don t worry if you don t know what’s solder paste, where to put solder paste or how to use solder paste, our technician is here to show you what’s the best technique for micro soldering.
❤️ Become an EXPERT👉👉 movilone.eu
Flux
s.click.aliexpress.com/e/_ANZxF0
s.click.aliexpress.com/e/_9vUJiI
Solder paste
s.click.aliexpress.com/e/_ALU26K
s.click.aliexpress.com/e/_9uIaH0
s.click.aliexpress.com/e/_9Rj5mA
Hot air station
s.click.aliexpress.com/e/_AbMd4i
s.click.aliexpress.com/e/_9vGIyO
s.click.aliexpress.com/e/_9h73Rs
s.click.aliexpress.com/e/_A224OE
Soldering station
s.click.aliexpress.com/e/_AYKf14
s.click.aliexpress.com/e/_A8FlV8
s.click.aliexpress.com/e/_9xWHsK
Desoldering Braid
s.click.aliexpress.com/e/_AMZChu
s.click.aliexpress.com/e/_A6ztYa
Microscope
s.click.aliexpress.com/e/_9iClSO
s.click.aliexpress.com/e/_AcoeoI
s.click.aliexpress.com/e/_AdOauq
Mechanic uv
s.click.aliexpress.com/e/_9yqlTo
s.click.aliexpress.com/e/_AOxrAe
Soldering wire
s.click.aliexpress.com/e/_9iL0ma
s.click.aliexpress.com/e/_A8cUTG
We also recommend the best microsoldering kit, so that the resulting work is one of the best quality.
Sometimes ,customers prefer to take their damaged devices to technical services that offer microsoldering service near to me, rather than official services, so for that you need to be prepared with all the micro soldering tools and to know the best techniques of micro soldering.
As always, if you have any questions or doubts about soldering SMD components using solder paste, please leave your comment below and I ll be glad to answer it.
Thanks for watching and see you next time! Наука
Very easy!
Hello Andreana and your assistant, thank you for the technology of the meat, especially the very small board. Really a wonderful video, and from you we can learn before opening a store for hardware and software maintenance.
Your tech makes it look easy, thank you for the lesson.
Aplausos👏👏
Mis respetos para esta dama que buen trabajo y gracias por poner el ejemplo de lo bien hecho y limpio👍
Muchas gracias por estas palabras 👍 Saludos!
✅ Suppliers that we use …In the description
Great job you do
R🌹
Tengo jeringas de aproximadamente 1mm de diámetro y cuando expulso la pasta se hace más grande que condensadores 0201.
@@govindasamydevanathan9003
Thank you Adriana, for delivering this video. It's very helpfull🙂👍. Greetings from Indonesia
Thank you too for watching! Best regards
Very good information & technic.
Creative video, thanks :)
اشكرك
Very good Adriana, thank you
Great...your work and your voice...
Great job
Como consigues depositar tan pequeña cantidad de estaño a los pads? yo con una aguja monto un desastre. Buen video y mucha profesionalidad enhorabuena.
Great video
Thanks!
Bedankt voor jouw werkt 👏👏👏
Nice!👏👏👍👍👍
Kita satu hobi,terimakasih sudah berbagi ilmu yang sangat bermanfaat ..🙏
Thanks!
Thank you.
Terima kasih telah berbagi cara menyolder dengan baik
Thanks!
hi do u have tutorial for cpu reball? for beginners, your reply is a big help thank u
Great teaching
Thank you for your comment! Best regards
Hi 👋 very helpful tips
Thanks!
جزاكي الله خير معلمة الناس الخير
What about flux washing?
Do you rinse off the flux afterwards or leave it on the board?
Great info, thank you. Do you videos on testing components on the board?
Thanks for your suggestion! Best regards
GRACIAS!!!
Your demonstration is fine and camera setting too, clear to view. Go on to help beginners. Simple English may help the practioners.
Thank you for watching! Best regards
Watch out for unwanted solder balls. Sometimes I get caught out. Lower air flow is good advice when learning. Will soon get confidence practicing with airflow rates. 👍👌✌️🇬🇧😷
Thanks for watching! Best regards
Nice video madam.
I'm from Bangladesh. I'm learning mobile repairing. Thank you so much for your videos.
Thanks!
Nice tutorial
Thanks!
Ya it's working,👍
Very good 👍
Thanks!
Sir, air flow and temperature which poin use??
great info
Thanks for your comment! Best regards
Madam ur video r amazing keep it up 👍
Thanks!
NICE
Thumbs Up and wishing you a Merry Christmas.
Thank you! Best wishes to you!
@@MovilOne You are welcome also.
✅
Good😃
Good one
Thanks for watching! Best regards
Is it better to press down the component into the board?
Good job
Thanks!
My solder paste did not flow into position, but dried up into a "dry powder" it seems. What did I do wrong? Was the temperature to high maybe?
Thanks g madam great information im indian thanks
Thanks for watching! Best regards
Merci beaucoup.
Thanks 👍
Hello, I would like to know what is the transparent liquid after you apply the solder paste, since the components has fixed, but the transparent liquid is still there, so is is a gel or something, thank you
Soldering Flux Amtech
Para menos peligro ahora con cautín jbc punta C210 o C115. Xq muchos no tienen esa boquilla delgada para la última soldadura que hiciste👀 saludos Leonardo
Hola Erick, tú sabes de sobra que se puedes hacer de mil formas 👍 Un saludo
Thanks
👍
Tnx apu
Hi Adriana,
In the video you said 10% Air. What do you mean by 10% air.Is it hot air pressure applied to component you are soldering ?Do you mean to reduce the air presssure to 10%?
350c temp , 10% blower speed
Is that capacitor 0402 [1005 Metric] ?
Tq mm
Theirs no link to tools use in the description ? Will be nice to know ? Thank you 🙏
Thanks!
Good
Thanks 👍
nice
Thanks ✅
What is the nozzle that you use for the hot air gun (5:35)? I've never seen one so thin, looks very useful!
Hello! JBC JNA High-Precision Hot Air Station.
JBC offers a replacement heating element J125010 with outlet diameters of 1mm.
0:20 ruclips.net/video/0Cz-0GN_chU/видео.html
Adapt a ball pen
always small nozzle
Hello , I have a small repair shop where I live I’m the only one who advertise micro fix on any mother board ! I do like the way you show your style of work and techniques but we need to know which device your working on ! Overall keep up the good work !
Thanks!
what is the name of the first electronic component?
ok thanks
Thank you, too for watching our tutorials! Best regards
Manita arriba!
Gracias 👍
Hi mam this method is used for lcd connector
Class 10 connector LCD
On the six contact component that you soldered down, why doesn't the paste simply form a long connection on each side? How does it form up into six separate connection points? Obviously it must work, but why?
Because when the micro metal beads that are in the paste melts, it's basically magnetized to the metal parts👍
@@catherineharris4746 Thank you!
Great video, but, you've forgotten to mention the surface tension ;). It's worth understanding it from day 1.
Sorry, you've mentioned a bit at the end of the video. Thank you.
Thanks for paying attention and if I m wrong, I ll be glad correct my position! Bets regards
If you set air flow strength in heat gun too high, surface tension will fly away together with components. Don't ask how I learned about that.
@@KrotowX we've all done it though ;).
Perfeito.
Thanks for watching! Best regards ❤️
Iam subcrebed
Wow
This liquid pest name & brand ???
AMijing idiyea good
Nice the work to See but i think you need one air Extraktion because you can get Cancer from the soldering Air. The second after the first soldering you Mast clean the Solder place because the acid in the soldier go in the parts and startet a corosion
there plese clean it with alcohol
como puedo raducir ese video en yotube si lo descargo alguien me ayuda
❤❤❤❤
Keo Hàn mua ở đâu
Bhai heat or air
SMD means?
Which paste used?
Amtech
Used 2 tip ion with solder fast then this one
💓
Which type paste it is
Amtech
Can be purchased from India ?
Hello, Ram
In the description of the video, you can find all the links for what you need. Good luck!
👍👍👍
Thanks!
Heart gun name ??
Have 1 res up side down
Eu não sou estadunidense mas se eu fosse chutar diria que pelo sotaque ela é da Índia 🤔
I love voice
Thanks!
Paste kotai pabo
What is the name of that paste . Please reply
Amtech! Best regards
Not open your link in description...
Hello, Kk Mobile! Wich one doesn t work?
pleas the nam of solder use
JBC JT Hot Air Station
Whats name of the paste
On the description you ve got the links! Best regards
Hi
Hello ✅
This repair video is very detailed. If you need mobile phone repair tools, please contact me. Thanks for sharing.
I don't understand why my solder paste is hard..I even have difficulty pushing the piston
Many reasons fake. Frozen. ..should use liquid such alcohol 99 % or Flux. to soft. 😊
❤❤❤❤❤❤❤❤❤❤❤❤
Show
Thanks!
needs a bit more heat
Oaii find nau yusit
Subtitles wi whatseeing
Ok
Ii single french man
Looks like she has abandoned the commenters questions. I think I'll look at more videos to find one
that explains things better.
Bro this past name
Amtech