FOR UPDATED WITH VOICE: First on S1 go to Config Terminal, while adding the initial vlans, also add: interface vlan 150 name VOICE For the second part: Go to S3 Config t interface fastethernet 0/11 switchport voice vlan 150 Should be good to go.
For those of you looking for the updated version: vlan 10 name Faculty/Staff vlan 20 name Students vlan 30 name Guest(Default) vlan 99 name Management&Native vlan 150 name VOICE Step 3 on S3 interface f0/11 mls qos trust cos switchport voice vlan 150 end
In my test I must connect thre switches to another switch, each in a specified vlan. I already created the vlans and assigned the ports on each, the issue though is that only the port on the lower switches will turn green, meaning there is NO connection between the main switch and the other two. What am I doing wrong? Also, the main switch is connected to a router but that is not an issue for the test, it is actually the least difficult part.
Hi, please can you help me, I can not find the continuations of 6.2.1.7 Packet Tracer - Configuring VLANs , it stops, says there is another video, but I can not find 6.2.1.7 Packet Tracer - Configuring trunks? thx (very helpful video)
Hi. I have a pretty big network and many many vlans. Is there a way to avoid re-writing a lot of vlans for each switch? For example, if I have vlan 10, vlan 20 and vlan 30 and switch 1, switch 2, switch 3, is there a simpler way to add the vlans in every switch's database than manual add them? Can I export the vlan database from one switch and import it to another switch?
Hi, thanku sir for a this. Could you tell me that in S1 when you write the S1(config-clan) #^Z then what would we do because if we put the button for enter then they write something different as compared to S1# or the next line. Sir please tell me fast.
Hi dear Friend... Its a shortcut, ctrl+z (ctrl and z from keyboard), which will help you to goto privileged Exec mode directly... Thank you so much my dear Friend for your great support...
Here only same VLANs will communicate each other. We didn't do inter-VLAN configuration. We done only intra-VLAN configuration, so different VLAN won't communicate each other.
Hi If you need any help, contact our team using our website, link will get from the latest videos description. And thank you so much for your great support and sharing our channel with your friends...!!
FOR UPDATED WITH VOICE:
First on S1 go to Config Terminal, while adding the initial vlans, also add:
interface vlan 150
name VOICE
For the second part:
Go to S3
Config t
interface fastethernet 0/11
switchport voice vlan 150
Should be good to go.
THANKYOU
i was stuck in this part 😥
thank you so much
a trick: watch movies on kaldrostream. I've been using them for watching a lot of movies during the lockdown.
@Alvaro Chaim Definitely, been watching on Kaldrostream for since december myself =)
Dude, srsly, youe videos are SAVING my life. Thank you so much for your time and effort you put in your videos. I highly appreciate them!
I love the videos. You speak clearly, zoom in on what you are doing, and explain everything thoroughly.
Thank you
Step by step progression clear. I love this.
thank you for taking time to make these videos, the help immensely in my studies
Thank you so much!!! I was struggling and now that you explained it it makes sooo much more sense!
Glad it helped!
And contact us if any training needed...
For those of you looking for the updated version:
vlan 10
name Faculty/Staff
vlan 20
name Students
vlan 30
name Guest(Default)
vlan 99
name Management&Native
vlan 150
name VOICE
Step 3 on S3
interface f0/11
mls qos trust cos
switchport voice vlan 150
end
Thank you, I was struggling with that bit.
Fantastic video's you are the first person I look for. Takes a lot of time and effort to make these, thanks very much sir.
Thank you
Thank you for working through the activities one step at a time and answering the questions. Great job!
Fantastic exercise (Lab) ! Keep going !
Thank you! Will do!
And thanks for your great support and sharing my dear friend...
And also you can contact us for any support...
Wonderful work, no words to describe how much you help with these videos, keep up your great work!!! Thanks!!
Hey man your videos are amazing thank you so much :)
Glad you like them!
And thanks for your great support and sharing my dear Friend...
Great work as always. Thanks for the explanation.
Another great video. Just an FYI, they added a IP phone between S3 and PC4 in their newest version of this PT activity. Thank you as always :)
Thank you Ray.
You have been such a wonderful help. Thank you for your time and effort it is much appreciated.
Thank you
In my test I must connect thre switches to another switch, each in a specified vlan.
I already created the vlans and assigned the ports on each, the issue though is that only the port on the lower switches will turn green, meaning there is NO connection between the main switch and the other two. What am I doing wrong?
Also, the main switch is connected to a router but that is not an issue for the test, it is actually the least difficult part.
Thanks bro! You are a God!🤞🤟
Glad I could help
please recheck , new pak activity is with voice vlan
Hi, please can you help me, I can not find the continuations of 6.2.1.7 Packet Tracer - Configuring VLANs
, it stops, says there is another video, but I can not find 6.2.1.7 Packet Tracer - Configuring trunks?
thx (very helpful video)
Once again Very good -Video - Dziękuję
Hi. I have a pretty big network and many many vlans. Is there a way to avoid re-writing a lot of vlans for each switch?
For example, if I have vlan 10, vlan 20 and vlan 30 and switch 1, switch 2, switch 3, is there a simpler way to add the vlans in every switch's database than manual add them? Can I export the vlan database from one switch and import it to another switch?
Thank you so much, this was so helpfull
Thank you so much my dear Friend for your great support...
Hi...can u pls tell me how u did the pan and zoom while recording the screen ..
I really love you man!
Glad it helped!
Thank you so much
Any time
Gracias desde México fierro pariente
Hi, thanku sir for a this. Could you tell me that in S1 when you write the S1(config-clan) #^Z then what would we do because if we put the button for enter then they write something different as compared to S1# or the next line. Sir please tell me fast.
Hi dear Friend...
Its a shortcut, ctrl+z (ctrl and z from keyboard), which will help you to goto privileged Exec mode directly...
Thank you so much my dear Friend for your great support...
Awesome content
where to download the packet tracer file?
continue next bro
i need continuation
My hero, dude
Thank you
Author separately creates VLANs on sw1, sw2, sw3, what if he had 50 switches? Would he still do that? Silly
We can able to configure more switches with the help of python automation process. No need to login every switch for manual configuration.
Sr, I saw the whole video and it does not work at the end.Really?
Here only same VLANs will communicate each other. We didn't do inter-VLAN configuration. We done only intra-VLAN configuration, so different VLAN won't communicate each other.
@@TechAcad I got it.
Thanks for replying.
You are welcome dear Friend
Love you man
Glad you like it!
Opened this video to looking an answer for last question, but it doesn't decided :(
Hi
If you need any help, contact our team using our website, link will get from the latest videos description.
And thank you so much for your great support and sharing our channel with your friends...!!
Is show vlan is same as show config vlan
tech acad could you update your videos please there is a vlan 150 for voice.
can i have the pka file please?
Good Work
Legend lol
it is very nice
Thank you
2:32
yes