I find I’m locking my fronts so much in the wet it’s ridiculous 😂 but I’m loving this game so much. Thank you for your settings the camera feels much nicer already 👌🏻
Here I am using like 100-110 FFB on a Thrustmaster TS-XW, maybe I should lower it 🤣🤣 and I think I have all these other settings in that same menu at like 50 or something, except for wheel damper. I'll try your settings!
@@BushiAntz It definitely felt better, I gained time pretty much every track in Time Trial, some more than others. I tried the 300 degree wheel rotation and found 360 to be better for me, so I reverted it back. Knocking down the rumble strips helped a bit as well, made the wheel a tad bit less jerky in those scenarios.
CSL Elite is still a strong wheelbase even though it isn't a DD, I definitely think 70 will be enough for it, if not maybe 80 but try anything between 60 and 70 and see how that feels first
Hi Bushi thanks for the great video. I just wanted to ask you on the ffb strenght topic. So David Greco mentioned to have the ffb settings strength to max of 70 to not experience clipping? I have a gt dd pro 8nm and i have to admit in some corners like australia t8 and canada t5 the wheel just gets very numb for a short time. I assume this is the feeling of clipping. So do i understand correctly that with a gt dd pro 8nm 70 should be the limit to avoid clipping? thanks a lot
Yeah, that is what that means from what I gather. With an 8nm wheel you could probably get away with even less than 70. Codemasters FFB isn't as detailed as sims like ACC or iRacing so do remember that
Hey Bushi could you explain how you use the t-lcm pedals with a different wheelbase like you do with moza's r5 on f1 23. I have the t-lcm pedals but I cant seem to figure out how to connect them on f1 23 with a different wheelbase
T80 doesn't have motor Force Feedback so honestly, I'm not sure. I would definitely recommend in your case to use something higher than 70. Maybe try 100 and if it's still weaker boost it up
For the G29 probably not, I'd recommend turning it down slightly from the max though as you'll definitely be clipping and that can even harm the wheelbase
I find I’m locking my fronts so much in the wet it’s ridiculous 😂 but I’m loving this game so much. Thank you for your settings the camera feels much nicer already 👌🏻
Haven't done much wet conditions yet but it sounds like a lot of fun 😭😂😂
Setting changes have already made a huge difference. Thanks!
Ty for the pithouse import. Had my r5 bundle with formula mod for a few months now and I finally have something enjoyable to play other than iRacing
Thanks I just started getting into F1 sim racing and I think your setting is good and not overwhelming.
Glad you're getting started man, always come back to the channel, I'll have a bunch of videos that will help you out coming soon ✊🏿
Thank you for these set ups bruv, appreciate it. Always a pleasure to watch your F1 videos. 5/5!
Thanks for the video Bushi, this will for sure help me keep up the amazing work and grind! 🥰💙💙
The game feels completely different after putting these settings on. Thankyou Sir
Real time saver. Thanks.
Will be doing track guides for Vegas and Qatar?
Will be doing guides for all tracks mate 😁
@@BushiAntz I just saw that Bahrain has dropped. Look for to watching...and Learning.
I use cockpit mode with fov set to 6 or 8 or 10. So much better
Great video thanks mate :)
Bushi, you are one of the best F1 content creators out there in my opinion! Keep up the good work!👏👏👏
Thank you 🙏🏿
You're underrated F1 creators than most
Always glad to see you here Mike 😁
That setting does not show in my ps5. On screen display
Here I am using like 100-110 FFB on a Thrustmaster TS-XW, maybe I should lower it 🤣🤣 and I think I have all these other settings in that same menu at like 50 or something, except for wheel damper. I'll try your settings!
Let me know how you get on with it. The TSXW is quite a powerful wheel (about the same nm as my R5)
@@BushiAntz It definitely felt better, I gained time pretty much every track in Time Trial, some more than others. I tried the 300 degree wheel rotation and found 360 to be better for me, so I reverted it back. Knocking down the rumble strips helped a bit as well, made the wheel a tad bit less jerky in those scenarios.
Smashing the like!
Wowery 👀
Good work pal keep it up. What force feedback do you think for a fanatec csl elite. It’s not a direct drive and on the last game I ran it at 116?
CSL Elite is still a strong wheelbase even though it isn't a DD, I definitely think 70 will be enough for it, if not maybe 80 but try anything between 60 and 70 and see how that feels first
@@BushiAntz thanks for taking the time to reply pal. Will defo give it a try at 70 👍
Bushi will you make a full traction vs no traction time difference? Would be amazing to see!
Put that on my list but I'm going to take a different angle on that video idea :)
Will be out soonish
@@BushiAntz awesome can't wait!!
Hi Bushi thanks for the great video. I just wanted to ask you on the ffb strenght topic. So David Greco mentioned to have the ffb settings strength to max of 70 to not experience clipping?
I have a gt dd pro 8nm and i have to admit in some corners like australia t8 and canada t5 the wheel just gets very numb for a short time. I assume this is the feeling of clipping. So do i understand correctly that with a gt dd pro 8nm 70 should be the limit to avoid clipping? thanks a lot
Yeah, that is what that means from what I gather. With an 8nm wheel you could probably get away with even less than 70. Codemasters FFB isn't as detailed as sims like ACC or iRacing so do remember that
Hey Bushi could you explain how you use the t-lcm pedals with a different wheelbase like you do with moza's r5 on f1 23. I have the t-lcm pedals but I cant seem to figure out how to connect them on f1 23 with a different wheelbase
If you're on console then it's not possible. If you're on PC, you need to connect the pedals to the PC via USB :)
What the force feedback on Thrustmaster T80 and correct settings for Thrustmaster?
T80 doesn't have motor Force Feedback so honestly, I'm not sure. I would definitely recommend in your case to use something higher than 70. Maybe try 100 and if it's still weaker boost it up
When will u do track guides?
Hi mate can u tell me what springs u use on tlcm and how many spacers or mod? what your settings are on software tlcm?
I use the red spring at the top with a custom elastomer at the bottom with 96 Brake Force (no spacers)
Bro , I am your fan !! Can you say if you know will f1 23 be free with Xbox Ea play ? At 16 of June
I believe if you're on EA play, you'll get 5 hours free play
@@BushiAntz thanks but will it be not trial ?
Does FPS affect the kerb physics on F1 23 like it did on F1 22 where it was fine to set to 60 FPS?
From what I understand yes that's still a thing
I have a Logitech g29 for ps4 and l feel I need the most ffb and I have it set to the max. Should I now change it to below 70?
For the G29 probably not, I'd recommend turning it down slightly from the max though as you'll definitely be clipping and that can even harm the wheelbase
can you show you Moza wheel settings?
The download link is in the description as mentioned :)
I use 90 brake saturation just cause it helps me for some reason to control my braking muych easier
I am amused by the streamers they don't use Cockpit 🥲
Well considering that I use a 16:9 monitor, cockpit cam wouldn't be realistic either as drivers in real life don't have 16:9 vision :)
@@BushiAntz You are probably right, I just find it more natural than the other cams.