How To Set Up Your Apple TV 4K for the Best HD Video & Dolby Atmos Experience
HTML-код
- Опубликовано: 27 май 2024
- In this video, we discuss the optimal video and audio settings to get the best performance from your AppleTV 4K streaming device. Many folks may not realize If you don't properly set up your AppleTV 4K, it may not properly show SDR content. This is a must watch video IF want to experience the very best SDR and HDR video performance and Dolby Atmos audio from your AppleTV 4K.
Final AppleTV 4K Settings:
Format: 4K SDR 50 or 60Hz
HDMI Output: YCbCr
Chroma: 4:4:4 (if you have sufficient bandwidth)
Match Content: Dynamic Range and Frame Rate
Audio: Change Format Off ; Dolby Atmos On
0:00 Introduction
1:35 Hardware Requirements
3:27 Atmos Speaker Layouts
4:55 ATV Hardware Recommendations
5:15 Network Connection
6:00 ATV Settings Menu
6:19 Format Settings
8:18 HDMI Output Settings
8:36 Chroma Settings
9:10 Match Content Settings
9:41 Audio Setup
10:15 Check Results
12:05 Note About Streaming
12:36 AppleTV 4K Final Settings
Learn about Spatial Audio Music:
www.audioholics.com/audio-tec...
AppleTV 2nd Gen 64GB on sale $99: amzn.to/3jDqVnT
AppleTV 3rd Gen 64GB on sale for $124: amzn.to/3WRttgn
AppleTV 3rd Gen 128GB on sale for $149: amzn.to/3G3sOBN
Shop Audio Advice: bit.ly/3thUFI1
Join this channel to get access to perks: bit.ly/35dZZ7a
Recommended Headphones:
Focal Bathys: bit.ly/FocalBathyswireless
Focal Celestee: bit.ly/Focalcelestee
Mark Levinson 5909: bit.ly/MarkLevinson5909
Sony WF-1000XM3: bit.ly/SonyIEMs
Recommended Subwoofers:
SVS SB-1000 Pro: audioadvice.io/36Pea3a
SVS PB-1000 Pro: audioadvice.io/3sreeyk
SVS SB-3000: bit.ly/SVSSB3000Sub
Paradigm Defiance X12: bit.ly/ParadigmX12
Recommended AV Receivers:
Onkyo TX-RZ50 ($1,599): bit.ly/OnkyoTXZ50
Denon AVR-X3800H 9.2CH AV Receiver: bit.ly/DenonX3800h
Marantz Cinema 50: bit.ly/MarantzCinema50
Yamaha RX-A2A: audioadvice.io/3ppWFg9
Denon AVR-X6700H 11.2CH AV Receiver: audioadvice.io/3HsdEou
Anthem MRX1140: bit.ly/AnthemMRX1140
Anthem AVM 90 15.4CH Processor: bit.ly/AnthemAVM90
Monolith M8250x 8CH Amp: bit.ly/8CHamp
NAD M23: bit.ly/NADm23amp
Recommended Powered Speakers:
Kanto YU4: bit.ly/Kantoyu4
Kanto YU6: bit.ly/KantoYU6speakers
Kanto TUK: bit.ly/KantoTUK
Kanto Sub8: bit.ly/KantoSub8
Recommended Center Channels:
SVS Prime Center: bit.ly/SVSPrimecenter
Paradigm Premier 500C: bit.ly/Paradigm500C
Revel C208: bit.ly/RevelC208
Recommended Speakers:
SVS Prime 5.1 Speaker / Sub System: audioadvice.io/3JZJOt5
Polk R700 Tower Speakers: audioadvice.io/3C0TK2B
Heco Aurora 700: bit.ly/HecoAurora700spks
Heco Aurora 1000 Tower Speakers: bit.ly/Aurora1000
Klipsch RP-8000F II Tower Speakers: audioadvice.io/3445l4A
Arendal 1723S Tower Speakers: bit.ly/Arendal1723s
Focal Aria K2 936: bit.ly/3zVAxi5
Focal Kanta No2: bit.ly/Focalkantano2
Sony SSCS5 Speakers:audioadvice.io/3td2O0w
SVS Prime Elevation Surround: audioadvice.io/35aZCdR
Audioholics Recommended Cables:
250ft CL2 12AWG Speaker Cable: amzn.to/2vwS9QH
50ft 10AWG Speaker Cable: amzn.to/3DeMTT5
Locking Banana Plugs: amzn.to/2ZQt15x
9ft 4K HDR HDMI Cables: amzn.to/2WiIXeD
Follow us on:
Patreon:
/ audioholics
FACEBOOK
/ audioholics
TWITTER
/ audioholicslive
#AppleTV #streaming #hometheater 
Наука
This helped with making my SDR content look tremendously better. No more color banding and colors really pop on my Epson 5040UB. Thank you Gene and team!
Thanks, good tips. 4K SDR and match content!!
Great show as usual. I really liked this as I was using the wrong setup. So much better. Thanks, Richard
This was very helpful…just updated the settings on both my Apple TVs. Thanks Gene!!
Very helpful video! The atmos now sounds incredible 😎 Thanks for the video Gene
I just got the latest 128Gb version for Christmas. I just upgraded from the 2017 4K version. Apple did a great job of keeping the older versions up to date. The only difference I noticed between the two is when watching RUclips in 4K 60fps. The older version would down scale to 1440p 60fps.
Love when Gene goes back to basics.
I’ve been impressed with the implementation of Atmos music with the Apple TV. Very nice for those of us with home theaters.
Excellent information. Thank you!
Thanks for the video. I always was worried it wasn’t configured correctly. 👍
Hi,
Would like to say a big thank you for set up of Apple 4K, since taking your direction on setup I have found that RUclips is not buffering between adverts/commercials while watching videos.
This was caused by setting the Apple to 4K HDR 50/60hz and was frustrating me for months, so once again a big thank you.
If you have a video on how to set up the best Dolby Atmos on a Yamaha RX-A3080 with a 5.1.4 Dolby Atmos setup I would be very pleased to watch and learn and have my system sounding just like it should.
Once again thank you and have a wonderful New Year.
Thanks Gene, Happy New Year to you and your family. Have swapped over to Apple tv/Apple Music coz of you. Really enjoying the Atmos mixes. Only problem is now i wanna upgrade my surrounds!
Thanks Gene, another great video.
Luckily it seems I had the settings you recommended.
Happy New Year 🥳
Thanks Brother , I needed this video. Perfect timing.
Thank you I had multiple settings wrong for years . Randomly came across this video and now I know .
Thank you for this most informative tutorial!
Hello Sir Gene! THANK YOU so very much for documenting your recommended settings! I spent most of 2022 building a new dedicated theater in my home. Two of the components of my theater are the 3rd generation Apple 4k & a new Epson LS12000. I was a bit disappointed with this matchup due to a several second (up to several minute) Delay when switching from one RUclips Video to another, or switching from RUclips to Netflix, etc. BUT…, using YOUR settings, those annoying delays are History! My sincere thanks Sir!
Great Vid Gene. "Audioholic" or not, your video suggestions are right on. This video took a page right out of my brain. Keep up the video suggestions, always like hearing what you have to say.
Very good good stuff thank you this was something I really needed to know thank you
Had mine set wrong! Thank-you!
Great video Gene. One more consideration for next time is to speak to the Apples support of HDR10+. There is actually a growing amount of content in this newer dynamic HDR format. It is only supported on the Gen 3 Apple TV and does require the AVR support of HDMI 2.1. I just upgraded my Denon 8500H with the new 8K board.
Nice clear explanation of what setting to use and why - some of them counter intuitive for me - this is a good help. thanks
I just picked up an Apple TV 4K latest model, so this content is greatly appreciated. Also picked up the Yamaha RX A6A receiver yesterday evening, so I’m going to have some fun.
Thanks for an excelllent and imformative video!
Thank you! I use an Apple TV (2nd gen) but was not aware of those settings
Thank you. Could you plz advise how to set it up for Sony HT-A9 ?
I just like to say a very big thank you this is made a big difference to my Apple 4K TV watching this video I had it all set up wrong and now everything is going great thank you very much
Thanks Gene. Just set this all up.
Amazing video! Thank you sooooo much. This solved my problem. Could not get Netflix app to work correctly on Apple TV. Now it does! Thanks again!
Gene,
Another interesting and informative video. I am using a 2021 Roku Ultra for streaming duties on my Sony OLED/Denon AVR in the living room and a Roku 4K Express on the Sony LED/Polk soundbar w/sub in the master bedroom.
Happy New Year to you and your family!
Mr. DellaSalla,
I've been wanting one of the Apple TV units sense you first spoke of them, but I wonder how would it benefit my system. I'm just a nearly flat broke bugger and I only have an older Onkyo 5.1.2 and an old Sharp Aqous 70" 1080P.
Thanks a million for all that you do and I wish you and yours all of the very best in the new year!
Hi there, thank you so much for this video, it helped me to set the correct video setting, l previously set to 4K HDR 4.2.2 and gave me screen backout 5 seconds every time l change videos, now ok thanks alot
thanks Gene from Australia.i have Atmos on the anthem avm70 this helped out a lot.
Great information, thanks! I do have a gen-3 Apple TV 4K, which I love, but I do have a question. I don't yet have an Atmos receiver, though I plan to get one. With a standard stereo setup, should I disable Dolby Atmos in the audio settings, or does Apple TV automatically down-convert the audio to match the current system setup? Cheers!
Great video glad you fixed you money problems.
Thanks for the audio portion. As for the Dolby Vision, that is the native mode for my LG TV, so it works much better with that option enabled. Picture quality with pass through a Yamaha RX-A4A is outstanding. It's much better video, with the same settings, than my previous AVR Marantz (SR5012).
Great video. I would like my Trinnov to do the processing and not the Apple TV unit. Is this possible as all I see are apCM settings and not bitstream 🤔
Thanks Gene, really helpful. One additional tip is to make sure ‘Reduce loud sounds’ is set to ‘No’ in the audio settings, to maintain full dynamic range.
There are also settings in the ‘App settings’ for Music where you can switch to lossless and Dolby Atmos as automatic.
I wish Apple put that on the slide out screen that users access any time (I forget what that is called). So then, if you live in an apartment, don't want to wake the kids or just want to have a less booming experience, you can turn on reduce bass quickly.
Such an amazing video
Thanks Gene, as always is great to have the support and suggestions from specialist like you, But what about the TV´s that automatic select the best output format? especially uf I have disable Dolby Visión or HDR disable, because I enable SDR format as you suggest. Thanks again and keep watching and listening. This is Paco from Mexico
Good stuff, thanks for these tips! I had mine slightly off and I see quite the difference now. BTW 1889 is awesome :)
I wonder if you would consider doing Roku version of this video.
Thanks for another informative video, Gene! I have a Sony A80J and Denon X4700H AVR. My TV has all the streaming services built in. Would the sound and picture quality improve if I also got the Apple TV. I primarily stream Netflix, Amazon Prime, and Apple TV+. I am new to this and do not fully understand how this technology works. Thanks again!
I learned a lot, Thanks ! On my Marantz 7015, with Apple 4k Box set to SDR, is RGB the same as 4:4:4 ?
Hello Sir I want to say thank you I love your show it very informative! My question to you is I’m about to pull the trigger and upgrade to a S95C tv and my concern is that my AVR Denon 4500H will it be compatible? It’ll be hooked up alone just for audio I’m currently running a 7.1.4 will it work or do I need to upgrade my AVR?
great video...not sure though if I am doing something wrong, but I don't see 60hz whenI press info on my remote for the receiver, I see atoms, but only 4k 30 hz, I know my tv has 4k 60 hertz
but boy it sure does sound and look good, the dolby vision notification does pop up now when entering a movie that has it
thanks
Hi This was really helpful. I set my Samsung TV to your settings. I don't have Dolby Atmos on my Soundbar. Is it a good idea to set it to Auto or Dolby 5.1 surround?
Thanks a lot!!!
great review!!!!!
Great timing! I just bough an Apple TV over the Christmas break. I love the user experience. It's the perfect combination of Apple ease of use and geeky setup options such as the ability to match content.
Sadly, my Marantz 7702 doesn't support HDR. I either need a workaround or a new processor.
How bad would a Receiver with pre-outs be? I really don't want to spend $3000 on a Processor that will become outdated in a few years because of some new HDMI standard.
Simple solution that provided a great audio video experience out from my Apple TV
I love my Apple TV. I hook it using a pair of HomePods and for a small room it does an amazing job for Atmos. And music is great.
Thank you for the tips on the settings on ATV, but what about on the AVR? What sound and video settings should I set there? Pure? Direct? Dolby….
Thanks a lot!! This was what I needed, no more oversaturated cover art in Plex, perfect playback in 1080p, 2160 4k HDR or Dolby vision ... I almost threw out the ATV
AppleTV 4K Settings
•Format: 4K SDR 50 or 60Hz
•HDMI Output: YCbCr
•Chroma: 4:4:4 (if you have sufficient bandwidth)
•Match Content: Dynamic Range and Frame Rate
•Audio: Change Format Off; Dolby Atmos On
Thank you
Your tuff man Gene! Making ur brother wait until you released this video to get his info!!
Should I connect the Apple TV 4K device into my TV HDMI or to my Denon 3600H receiver HDMI? Thanks for the video!
That’s pretty cool. I was just looking for a way to have my sound bar. Turn on whenever my TV turns on since it doesn’t turn on after I install the Apple TV.
Apple has some great stuff I have to give credit to them. Great video
Thanks a lot Gene. I was surprised to see that input/output information that you showed in your video. I bought the Anthem MRX-1140 that you reviewed, I was wondering if you've been able to get that information and how ? Thanks again. I can't wait to watch Last of us tonight.
In the middle of watching the Expanse on Amazon. Picture and sound is on point. Sci fi science is decent
Thank you!!!!!!!!!
Notice the Marantz font color changes depending on SDR/HDR/DV. The standard font color is used for SDR, orange for HDR, and green for DV. The OSD color will reflect which format is being decoded (change volume for example while watching).
Have you got a nvidia shield version of this video?
Please can you show these settings on an nvidia shield pro…thnx
Curious what you think the TV audio settings should be for the HDMI input ...bitstream or PCM? I'm using two HomePods in left and right configuration.
I have the new apple 4K too. I do like the new remote too..and I just got the Yamaha A8A. Bad ass..
Great Video
Very good
Hello can I ask You 1 question:)? I have the apple 4k tv box, denon avr x1700h with a samsung qled TV. 5.1 serup with kef q750 and rel 1205 II. I don’t understand why the avr shows multi in when playing mostly everything? Why not dolby dig + D sorround? What multi in means? Regards great chanel
If I only have a 5.1 setup, is there an advantage to using Dolby Atmos or should I just keep it at Change Format and choice Dolby Digital? Thanks!
I like before I watch every time
I think automatic mode should work and streaming services can of course stream their material with several different frame frequencies . Surely the best thing should be for Apple TV to send in the same frame rate that the streamed material contains
Does Denon/Marantz “height virtualization” actually do anything for a room like mine with mechanical intrusions that ruin the placement of atmos height channels?
12:49 I knew I set this thing up right. Those are my exact settings. I had mess around with for a little while, but this is the end result for my setup.
Thanks Gene!
I set it up with my iPhone. The Apple TV asked “Home or My Home”? Which should I choose Home or My Home? Great video!
Well done
Thanks Gene, when setting mine up it didn’t switch to HDR or DV after being set at 4K SDR. Any ideas?
Awesome!
Question. I have a 2022 samsung qn75qn800b 8k tv and the new denon x4800h. Do you recommend having the peripherals for ex. Apple 4k tv directly to the avr or is it OK to pass through the tv? What are the pros and cons for each way?
I have got the 1st apple 4k tv box and thinking upgrade to a newer version because I find I have to turn up the av more is it just my what dose this and is the nivida sheld pro better
In my setup I connect apple tv 4k to a 1080p projector. And I wanna connect apple tv 4k wireless to samsung q990b and I wonder if you can get dolby atmos via airplay or bluetooth.
Do you need to turn on Dolby on even if you don’t have the extra speakers or even receiver with Dolby atmos?
Do you recommend using an audio extractor like OREI 429 to try to get Atmos to work off a tv that has only arc but soundbar has earc capabilities?
Can i use 9.1 setup with the Apple tv? Got marantz sr7011 with all 11 speakers on and 2 subwoofer
can you share the video of the set up
Dolby atmos / Spatial Audio music worked out of the box for me with the latest software update they have on there. Yet to check HD as I don’t have a 4K tv yet.
I'm happy my contractor cut open the subfloor for me during my renovation so that I could easily run a cat6 cable (and speaker wire) under the floor. I have 1gb wireless internet, but it's so nice to have a wired connection. I am happy with the 1st gen Apple TV 4K hooked up to an Anthem MRX1120 (5.2.4 system), but I might look into upgrading to the 3rd gen Apple TV 4k even though it probably wouldn't be worth it other than having a better remote. As you can see from my profile pic, I also have Revel beryllium speakers.
You can buy the better remote separately. We did and the older type is still in the box.
Might be a dumb question if you have Apple TV built in to your tsp
You still recommend having the separate Apple TV unit?
Does wanting HDR10+ for Samsung TV's change any of these settings?
I have my LGCXOLED TV plugged into the eArc HDMI input on my Denon AVR-760. Everything else on my system also runs through the Denon AVR to the speakers (DVD player. CD player, PS, etc) Where should I plug in the Apple TV using the HDMI cable? I didn't see that covered. Thanks!
What does it mean if I had the blinking and 1 second black outs when I was on HDR and after switching to SDR it was no longer doing that and worked smoothly. Is that a cable issue?
I have this Apple 4K and a Sony A90J Oled. After much back and forth and comparisons I enabled Dolby Vision on the Apple 4K and disabled Match dynamic range and Frame content.I found this gave the best picture quality on all streamimg services particulary RUclips regardless of the original definition and dynamic range.These are the default settings and for me the best
HI JEAN I NEED YOUR EXPERTISE IN SETTING UP MY ATMOS SPEAKERS AND MAXIMIZING MY AUDIO SYSTEM. I KNOW YOU CHARGE FOR YOUR SERVICE. WHAT'S THE PROCESS TO MAKE IT HAPPEN.
Have you experienced no sound on prime and Netflix with non atmos audio, when atmos is on in settings? I have to go into setting and turn off atmos to get sound
Don’t forget to turn on CEC so that your Apple tv can wake other devices, automatically switch inputs, and also control the volume of the attached receiver with the volume buttons on the Apple tv remote. CEC has to be enabled on both devices. My apple tv volume control was not configured completely by default, took an extra step of selecting REMOTES AND DEVICES > Control TV’s and Receivers (ON) > Volume Control (auto via HDMi{receiver}). In this case the “receiver” was a soundbar, and this is probably the setting of choice for any intermediary audio device between the apple tv and the display.
I’ll also add my settings for use on my ancient 2008 LCD tv, in the video options of apple tv, everything in “match content” is turned off. Because sometimes when matching hdr content it washes out the picture. I’ve seen several setup guides advocating turning them on, but allot of these settings exist for specific use cases with various hardware and aren’t always universally recommended.
Gene, thanks for the tip about using SDR 4K rather than HDR 4K. Using the latter setting always makes black and white TV shows look bizarre when I am using Plex. Actually, I prefer my nVIDIA Shield, but now my first generation Apple TV 4K will be more useful.
isn't there an automatic mode and Auto Frame rate should also be there
I'm comparing apple tv to shield. What did you prefer the shield?
@@Andersljungberg Yes, the Apple TV setting matches the content’s format. So it makes no sense to use SDR over Dolby Atmos if you have a high end TV that supports it. There’s too much ignorance on this topic. 4K Dolby atmos will have your screen savers and Apple menus at 4K Dolby atmos at all times. Then it will match the format for whatever content you’re watching. WHY downgrade to SDR for the screensavers and menu? Seems dumb to me
So do you have the ATV4K hooked directly to the receiver or the tv? If receiver is it in the eARC port or any HDMI port and how do you hook to the tv? Is it via an HDMI output to the tv?
Great video. ? I have a room that’s about 12x26. I’m looking to a subwoofer. My budget is $2,000 can recommend one for me. I would like to go with 2 but not sure at the budget I can at the moment
Thank you
I have an Apple TV 4K and on the video side everything is the same per you're wonderful video but a couple months ago I saw that I had ‘change format’ Setting on, which enabled HDR+ to be visible on the screen. I changed this to change format off after I read the explanatory comments on the screen where it said I would get better audio quality and It did get a lot better because it's PCM, uncompressed. But I lost the HDR plus functionality. Everything I now get is in Dolby Atmos which probably also means ‘Dolby Vision’ otherwise when it's not available I get PCM which I convert to Dolby surround. Is this all correct about HDR? what am I missing? Are the newer Apple TV boxes the same in this area? By chance is the sound quality better from the latest additions? I like HDR because it brightens up things really nicely.
The Apple TV Interface in this area is horrifying. Why the hell is it so awful?