This one was a challenge. Thank you to everyone who has patiently followed the series; you all ROOOOOCK!!! 🤘🤘🤘 Link to new merch below! ASPCA BCG Shirt - bit.ly/3SUi91I
you should do suzuki pv or honda monkey next they are mopeds but so fun :) i had 1 suzuki pv when i was 15 and i wanted to buyit back but idk where it is now :(
I too have completely rebuilt a 01 raptor and it tried to bankrupt me. Great video, your a great mechanic! I hope to see more of your work as you go. Those raptors are a huge pain but are soo fun to ride when they run right.
EDIT - Audio is fixed now! AUDIO IS NOT WORKING ON THE RUclips MOBILE APP. It works in the browser app on mobile, on TV and Computers all have sound. Hoping RUclips will fix this ASAP! 😠
As soon as I saw the upload I said out load, “no wayyy he got the raptor done!!” These builds may not be the most fun, but they sure are amazing to watch! Keep up the great work Mike!!!🤟
Man I just wanted to say, I can really appreciate the fact how you are completely honest and show everything including mess up that you have to fix. Most ppl wouldn't show those things. Well done and another great build.
You know what I like the most about your work? It's not just for the moment, you look out for whoever may be working on it down the road. Nice work man, I'm really impressed!
That intro is hilarious! Glad you are doing these builds, I've been really looking forward to this one since I had a 660, now have a 700, I want to get my old 660 back and convert it to EFI.
I’ve never watched two hours of any RUclips and this was worth every minute, as soon as I saw spark even I got excited lol! Long time sub Mike, always love these and you know I always say this, I love your attention to details and the amount of effort you put into these builds. I’ll be honest, that harness repair would have made me give up because I am terrible with wiring! Great job as always and glad to see this one done!
I’ve been at 660 Raptor guy since 2004. I have literally had every problem you’ve had with yours over the years. I realized when you got on the machine, that’s why I put up with all the grief I’ve been through with my machine. They’re just a blast to ride! You give lots of great info, do some really great DIY stuff when you run against problems and have fun with the process, even when it goes terribly wrong. Great job!
what an incredible video, 2 hours of show!! 🤯 always a pleasure to follow you and see these atvs come back to life... even if this one made it difficult for you 😅 thanks mike, you rock 👊👊
Mike you are one of the best channels on here. it's hard to find someone as authentic as you. Real content with real information. I work on helicopters and I can appreciate the level at what you are at. I hope you make it all the way to the top. I have been watching since you where just a small channel!
I’m always curious what is the hardest part of building these bikes? From the sourcing parts to the tiniest details. And how the hell did you get so talented?!? The videos continue to impress and motivate me to get out and try little things to see if they make a difference in the way I build my own bikes. Keep it up you’ve got some serious talent to this!
Awesome compliment man. Each build comes with its own set of challenges but I'd say the hardest part is usually ghost problems like what I had with this Raptor. When you're on a timeline to get things done for content, little setbacks that cost time are the most frustrating. I'm glad I can motivate you in your own builds and thank you again for the love man! 🤘
Great 👍 job mike like always, I was amazed at the wiring job you can do, I could have never done that… I can definitely respect a good wiring job. Because I know how hard it is. My dad is good at it but not me I don’t like wiring at all. Glad you got it running. And anytime I go ride my YFZ450 I always wear my voodoo banshee hoodie… I’ve had a few ppl come up to me when I’m at the dunes and say I love that channel.
I give you huge props for redoing that whole wiring harness and going through and making sure the whole thing was right, we need more people like you working on these kind of machines in this world because you and me both know that we encounter way too many machines like this. Keep up the good work brotha🤟🤟🤟
You’re a mad scientist brother the raptor is so amazing def was worth the wait phenomenal job keep the vids coming you inspire me to keep trying things
Hey mike been watching your videos for a long time now. I've been starting my own atv repair for over a year. Your channel is great for teaching techniques and tips keep up the great work man! Also im sure you've heard this or know it but Yamaha stators for sport quads are really poor from the factory the carbureted yfz 450s would charge better if they had the headlights on. Ricky Stator has some really top notch replacements I put one in an old yfz 450 I had. Charging difference and starting was unreal.
Thank you for being a long time subscriber Cole! I didn't know the Yamaha stators were weak from the factory. I have seen the high output ricky stator ones though; I might take your advice and try one on the Banshee I'm doing.
@@AmateurHourProdu I've heard both sides in feedback. I know they've undergone new ownership over the years so maybe quality has varied. I may give them a shot just to see.
The quad turned out super awesome. That Lexx pipe sounds great too. I love how at the start you went from “I can’t even wait for the parts to get here” to “I’m so tired of working on this quad” too relatable haha.
Big fan of the videos Michael! Would love the opportunity to do some dirt drag racing with you sometime! There is an ATV/Dirt bike dirt drag racing track about an hour and 45 minutes outside of Philadelphia in a town called Delta PA it’s pretty much right on the Pennsylvania/Maryland state line we do a lot of racing down there at least once a month! It would be really cool if you could make it out sometime!😎 -Hunter
I love watching people rebuild bikes and quads, I watched the raptor series before and I saw it pop up and I finally got to finish it, good job man, this is a clean raptor, it isn’t a Claptor anymore
This is an absolute trip. Very entertaining, compelling and informative. Love the custom made throttle cable part. Your OCD and ADD reminds me of me. Really enjoyed this video.
Great build video as usual! Glad you not only show us the triumphs but also show us the tribulations of doing a project like this. It's a great "real world" representation on what we all can encounter on small and big projects alike. Thanks for another great build now can't wait for the next! Keep up the great content and continuing to save sport quads!
I just started back in school and it’s my senior year and we’ll put it this way things haven’t gone super well so far but these videos always brighten my day up and give me some serious inspiration to go and get my bikes running
Nice bike. I like how you show the problems that go along with a build instead of other sites where they make everything seem so easy. Look forward to more builds
Just started watching your channel last week and I love the content brother. Been waiting patiently for a new video while binge watching all your older ones!
Please people understand and appreciate the moment when your help may be needed 33 cents is all the man is asking for. Heart (wrenching). That psa rates right up there with that old feed a hungry child commercial, less the joint with the dogs; with the ray Lamontagne song trouble. Nicely done sir.
This whole project is just a sign that you should do more banshee stuff. In all seriousness love the projects, you’re making me want to go work on my can am. Keep it up.
I cant believe how much time you put into your builds dude. That raptor 660 would have made me give up along time ago. Really pushed through on this one lol. Awesome stuff!!
I love watching him do this, since i cant. I got a suzuki vinson 500, i was gonna paint the plastics, do all this super cool stuff. Plans changed. I barely got it back together. Saying that i just took the plastics off and Michael is taking it down to the frame is super cool. Love the long videos!
I own a 2003 raptor 660r and definitely don't think that's an OEM header. Definitely looks like the Big Gun that I run except for the cover(mine is carbon fiber).They are geared really tall. I fixed mine with changing out the front sprocket for a slightly lower gear as I do a lot of woods riding. Also had the same problem with the parking brake making it hit hit the rev limiter to early when it was in a hard pull like climbing a steeper hill or getting it wound out on top end. Detected that and fixed the issue. The wiring harness on these does suck and I replaced the intire thing just incase and turned out that mine was just fine lol. Great build to watch and u did an awesome job for such a tedious build. Thanks so much for this.
Really surprised you don’t have more followers been here a long time your the reason I’ve done my own builds you have good instructions and help build peoples confidence I’ve built dirt bikes banshees street bikes all because of this Chanel 💪🏻
you can also say when he was explaining all the boxes with bolts, oem parts, ... you can just say a lot of fing money but its worth it its so beautiful
Great stuff showing the trials and tribulations of building a bike mate. Leaving those hassles in ur vids shows the reality of builds and has probably stopped many a bike being set on fire. Cheers mate
What a wicked machine! Great job, Mike! Couple of things, the oil pump is a two rotor design, 1st rotor draws from the tank to the engine, through the filter, to the cam, and crank, and then the second rotor draws from the case, and lubes the transmission gears, and then pumps it back to the tank. Also, the case has an O-ring between the case halves for the oil circuit. Top speed is 74mph limited by electronics. There’s a impulse rotor that can be modified to increase the top speed.
Love your videos and honesty in the hassles you encounter. Would really like to see you work on some ranchers and grizzly atv’s also. I have learned a lot from you. Thank you so much.
Another amazing video. There’s so much work shooting and editing these videos and you put out such high production quality! Plus you make the work look easy. You are a great craftsman with exceptional problem solving skills. I know this build has been challenging but you’ve learned a ton and passed on some great knowledge to your viewers as well. Thanks so much for the great content! Cheers from Canada.
All I can say after watching this is a big well done, bravo for keeping on working through all the problems you had, you faced them all head on and beat them 👏👏👏
RUclips seems like its always on a dry streak then BOOM! Mike the man saves the day with the lit videos. And they're 2 always an hour to two hours long. Diggin' the build, makes me want to finish this banshee and get a 660 next.
First off, your the man. I enjoy watching your vids bro. One thing I would love to see is you rebuilding a good utility-sports quad. Like picking up a used brute force 750, and doing a 840 kit on it. Turning it into a BA 4x4 machine. Your the man to do it.
@@MichaelSabo thanks! I’m a younger subscriber and have a Chinese quad but upgrading to a Honda soon so that will be the start of me rebuilding it and just making it a good quad
Excellent video all around! Content is awesome and the entire video is engaging. Great editing skills on top of sick mechanical knowledge. Can see myself binge watching these for sure!
By far my favorite build yet!.. That thing is Sick!!.. Not sure what it is about it but it just got that look! Plus seems more realistic with all the problems working on that thing, makes it relatable for me, because that's how thing usually go for me..
This one was a challenge. Thank you to everyone who has patiently followed the series; you all ROOOOOCK!!! 🤘🤘🤘 Link to new merch below!
ASPCA BCG Shirt - bit.ly/3SUi91I
Finally got me a quad hopefully we can meet up one day
you should do suzuki pv or honda monkey next they are mopeds but so fun :) i had 1 suzuki pv when i was 15 and i wanted to buyit back but idk where it is now :(
I too have completely rebuilt a 01 raptor and it tried to bankrupt me. Great video, your a great mechanic! I hope to see more of your work as you go. Those raptors are a huge pain but are soo fun to ride when they run right.
I’ve been patiently waiting for this video
Finally able to see it on mobile!
You know you’re on to something when even a two + hour video doesn’t seem long enough. Great video, Sabo!!!
Lee, thank you for the love as always bro!
❤ 0:15 🎉
You’re a trooper man. This build was nuts, so many tedious moments! Thanks for the 2 hours and 4 minutes of nonstop entertainment 😁🤘
You're the man Pete; thanks for the love!
EDIT - Audio is fixed now!
AUDIO IS NOT WORKING ON THE RUclips MOBILE APP. It works in the browser app on mobile, on TV and Computers all have sound. Hoping RUclips will fix this ASAP! 😠
i can only view in 360P on pc
I'm watching it anyway lol. Love your videos
It works on a browser like google
Nah video so good mobile can't even process it
@@nickhager8544 i am on google
This is one of the most underrated YT channels. Great work Mike! i hope to see more builds in the future:)
Thank you for the love brother! More builds to come 🤘
@@MichaelSaboare them A-arms +2
As soon as I saw the upload I said out load, “no wayyy he got the raptor done!!” These builds may not be the most fun, but they sure are amazing to watch! Keep up the great work Mike!!!🤟
Awesome compliment! Thank you man!
Same!!!!
Man I just wanted to say, I can really appreciate the fact how you are completely honest and show everything including mess up that you have to fix. Most ppl wouldn't show those things. Well done and another great build.
I have been waiting for this to be finished it’s is a cool build and hop to see more builds like this
Thank you for waiting and for watching man!
You know what I like the most about your work? It's not just for the moment, you look out for whoever may be working on it down the road. Nice work man, I'm really impressed!
That intro is hilarious! Glad you are doing these builds, I've been really looking forward to this one since I had a 660, now have a 700, I want to get my old 660 back and convert it to EFI.
Haha, glad you liked it! It would be interesting to convert a 660 to EFI
@@MichaelSabo I will have to do it now and share it with you!
I’ve never watched two hours of any RUclips and this was worth every minute, as soon as I saw spark even I got excited lol! Long time sub Mike, always love these and you know I always say this, I love your attention to details and the amount of effort you put into these builds. I’ll be honest, that harness repair would have made me give up because I am terrible with wiring! Great job as always and glad to see this one done!
I’ve been at 660 Raptor guy since 2004. I have literally had every problem you’ve had with yours over the years. I realized when you got on the machine, that’s why I put up with all the grief I’ve been through with my machine. They’re just a blast to ride! You give lots of great info, do some really great DIY stuff when you run against problems and have fun with the process, even when it goes terribly wrong. Great job!
Man this has to be ur best quad save yet hell yeah man brought that thing back to life awesome💪🤙‼️
Thank you Stephen!
I think I speak for everyone when I say the finished wiring harness is a work of art. Your skills are honestly incredible. Keep it up Mike!!!
I guess I was so excited I went deaf
Ha, me too!!! 🤣
It is working on PC and TV, for some reason it's not working on mobile right now, I dont know why
Yup no sound
Me too an I refreshed it many times
Same here
Haven’t ever seen someone so thorough and detail minded. Great job MS! Enjoy your videos !
what an incredible video, 2 hours of show!! 🤯
always a pleasure to follow you and see these atvs come back to life... even if this one made it difficult for you 😅
thanks mike, you rock 👊👊
Awesome compliment man, thanks for always watching and supporting!
Mike you are one of the best channels on here. it's hard to find someone as authentic as you. Real content with real information. I work on helicopters and I can appreciate the level at what you are at. I hope you make it all the way to the top. I have been watching since you where just a small channel!
I’m always curious what is the hardest part of building these bikes? From the sourcing parts to the tiniest details. And how the hell did you get so talented?!? The videos continue to impress and motivate me to get out and try little things to see if they make a difference in the way I build my own bikes. Keep it up you’ve got some serious talent to this!
Awesome compliment man. Each build comes with its own set of challenges but I'd say the hardest part is usually ghost problems like what I had with this Raptor. When you're on a timeline to get things done for content, little setbacks that cost time are the most frustrating. I'm glad I can motivate you in your own builds and thank you again for the love man! 🤘
I am glad to see her done. Looks great and you have a great story about building it. You should show your dad more.
Oh man, he can be hard to get on camera but I agree, he is a big part of how I became who I am and it would be cool to include him.
Love all your content,you rock!! Thanks for spending countless hours of editing to make us a two hour video to enjoy.
Im so glad I’m seeing more content about 660’s , great job !!!!! I would love to see more videos !
Great 👍 job mike like always, I was amazed at the wiring job you can do, I could have never done that… I can definitely respect a good wiring job. Because I know how hard it is. My dad is good at it but not me I don’t like wiring at all. Glad you got it running. And anytime I go ride my YFZ450 I always wear my voodoo banshee hoodie… I’ve had a few ppl come up to me when I’m at the dunes and say I love that channel.
I give you huge props for redoing that whole wiring harness and going through and making sure the whole thing was right, we need more people like you working on these kind of machines in this world because you and me both know that we encounter way too many machines like this. Keep up the good work brotha🤟🤟🤟
You’re a mad scientist brother the raptor is so amazing def was worth the wait phenomenal job keep the vids coming you inspire me to keep trying things
Glad I can inspire you man! Comments like this make my day; thank you 🤘👊
Loved all 2 hours of this build, thanks for sharing all the struggles with us!
Hey mike been watching your videos for a long time now. I've been starting my own atv repair for over a year. Your channel is great for teaching techniques and tips keep up the great work man! Also im sure you've heard this or know it but Yamaha stators for sport quads are really poor from the factory the carbureted yfz 450s would charge better if they had the headlights on. Ricky Stator has some really top notch replacements I put one in an old yfz 450 I had. Charging difference and starting was unreal.
Thank you for being a long time subscriber Cole! I didn't know the Yamaha stators were weak from the factory. I have seen the high output ricky stator ones though; I might take your advice and try one on the Banshee I'm doing.
@@MichaelSabo Can't wait to see that build too good luck finishing up the raptor! It's the coolest 660 I've ever seen
@@AmateurHourProdu I've heard both sides in feedback. I know they've undergone new ownership over the years so maybe quality has varied. I may give them a shot just to see.
I don’t know how you stayed with it and saved this thing! It’s great to have a new video from you!
I'm so glad you uploaded this the minute i finished the last one. Great job! =D
Thank you for watching man!
I just watch your old builds when I’m going through withdrawals of great atv content and craftsmanship💯💯🙏🏽🙏🏽
Hopefully they get it fixed lol. Excited to watch when I get to work
Yours isn’t working either?
Fixed now!
@@MichaelSabo yay! I love you Michael!
The quad turned out super awesome. That Lexx pipe sounds great too. I love how at the start you went from “I can’t even wait for the parts to get here” to “I’m so tired of working on this quad” too relatable haha.
Big fan of the videos Michael! Would love the opportunity to do some dirt drag racing with you sometime! There is an ATV/Dirt bike dirt drag racing track about an hour and 45 minutes outside of Philadelphia in a town called Delta PA it’s pretty much right on the Pennsylvania/Maryland state line we do a lot of racing down there at least once a month! It would be really cool if you could make it out sometime!😎 -Hunter
Thank you for the love on my videos Hunter! Shoot me an email - michaelsabo350@gmail.com - That sounds like a great time!
@@MichaelSabo Email sent my man!😎
I love watching people rebuild bikes and quads, I watched the raptor series before and I saw it pop up and I finally got to finish it, good job man, this is a clean raptor, it isn’t a Claptor anymore
Video is so fire it broke RUclips
It is working on PC and TV, for some reason it's not working on mobile right now, I dont know why
@@MichaelSabo 🤘 will watch on pc
I can't believe all the work that went into bringing this quad back to life, rebuilt completely from the ground up. Great job
I am laughing so hard at the intro 🤣
Lmao!!
always loved your stuff. thank you for doing our family video with derrick and the widow maker
Any one else get the “No stream Tap to retry”?
Yeah
Yeah
Me too
Same :(
Up and running now 🤘
best atv builder on RUclips in my opinion.
It’s not streaming 💔💔
Same
Same but other vids work
Use the RUclips on your browser
It should work
Same here
@@tristan_andrade why is the app not tho?
This is an absolute trip. Very entertaining, compelling and informative. Love the custom made throttle cable part. Your OCD and ADD reminds me of me. Really enjoyed this video.
👆Thanks for watching and Commenting send a direct message right away we l've got something Special for you🎁
It says no stream and other vids work
It is working on PC and TV, for some reason it's not working on mobile right now, I dont know why
@@MichaelSabo OK I will open on my TV by the way love the content Mike
Great build video as usual! Glad you not only show us the triumphs but also show us the tribulations of doing a project like this. It's a great "real world" representation on what we all can encounter on small and big projects alike.
Thanks for another great build now can't wait for the next! Keep up the great content and continuing to save sport quads!
Anyone having no audio with this video??
It is working on PC and TV, for some reason it's not working on mobile right now, I dont know why
@@MichaelSabo it's working on mobile now..
Dude I’m from Australia and I have been on RUclips every single day hoping this full build was posted, sending love from down under ❤️🇦🇺🦘
Never stop doing what you love man. It brings pure joy to me, watching and learning from you.
I just started back in school and it’s my senior year and we’ll put it this way things haven’t gone super well so far but these videos always brighten my day up and give me some serious inspiration to go and get my bikes running
Love what you do, Mike! I’m still a Suzuki 2 stroke guy but all the work you do is awesome! Thanks for sharing your projects!
It looks great, and will soon have the performance to match. Great job saving one of the most underrated machines out there.
Nice bike. I like how you show the problems that go along with a build instead of other sites where they make everything seem so easy. Look forward to more builds
Just started watching your channel last week and I love the content brother. Been waiting patiently for a new video while binge watching all your older ones!
Please people understand and appreciate the moment when your help may be needed 33 cents is all the man is asking for. Heart (wrenching). That psa rates right up there with that old feed a hungry child commercial, less the joint with the dogs; with the ray Lamontagne song trouble. Nicely done sir.
Love the full build vids! lots of troubleshooting knowledge you are documenting for a utility quad guy. Keep it up man!!
This whole project is just a sign that you should do more banshee stuff. In all seriousness love the projects, you’re making me want to go work on my can am. Keep it up.
That intro made me cry poor babys all alone and neglected
2 hours of pure gold! Love the long videos Mike!
I rode one of those it scared me that much I pretended I couldn’t start it back up lol bit of a beast 🤙🏻🏴
best intro ive ever seen in my life, every time i see it, it gets better and better.
I’ve never checked a channel on RUclips so much in my entire life lol so happy to see this up! You rock bro!
I cant believe how much time you put into your builds dude. That raptor 660 would have made me give up along time ago. Really pushed through on this one lol. Awesome stuff!!
Keep the awesome projects roll'n, Thank you all the sponsors and thanks for the content. Sorry it was a pain with the wire harness and transmission.
Awesome quad!!!! Me and my boys ride almost every day. Great save....
I love watching him do this, since i cant. I got a suzuki vinson 500, i was gonna paint the plastics, do all this super cool stuff. Plans changed. I barely got it back together. Saying that i just took the plastics off and Michael is taking it down to the frame is super cool. Love the long videos!
I own a 2003 raptor 660r and definitely don't think that's an OEM header. Definitely looks like the Big Gun that I run except for the cover(mine is carbon fiber).They are geared really tall. I fixed mine with changing out the front sprocket for a slightly lower gear as I do a lot of woods riding. Also had the same problem with the parking brake making it hit hit the rev limiter to early when it was in a hard pull like climbing a steeper hill or getting it wound out on top end. Detected that and fixed the issue. The wiring harness on these does suck and I replaced the intire thing just incase and turned out that mine was just fine lol. Great build to watch and u did an awesome job for such a tedious build. Thanks so much for this.
Really surprised you don’t have more followers been here a long time your the reason I’ve done my own builds you have good instructions and help build peoples confidence I’ve built dirt bikes banshees street bikes all because of this Chanel 💪🏻
you can also say when he was explaining all the boxes with bolts, oem parts, ... you can just say a lot of fing money but its worth it its so beautiful
Great stuff showing the trials and tribulations of building a bike mate. Leaving those hassles in ur vids shows the reality of builds and has probably stopped many a bike being set on fire. Cheers mate
Once I saw Mike's story on insta I went straight to RUclips I'm so excited
And then you get hit with no audio
lmao, it's fixed now 🤘
Atleast you are being honest with all the bugs. Sounds like you're a guru now.
Dude, your thermostat bracket solution was straight up TOP SHELF 👍👍👍
What a wicked machine! Great job, Mike!
Couple of things, the oil pump is a two rotor design, 1st rotor draws from the tank to the engine, through the filter, to the cam, and crank, and then the second rotor draws from the case, and lubes the transmission gears, and then pumps it back to the tank. Also, the case has an O-ring between the case halves for the oil circuit.
Top speed is 74mph limited by electronics. There’s a impulse rotor that can be modified to increase the top speed.
That was the best 2 hours i have spent in a long while!! Thank you!!
Great job sticking with it 👍 can't wait to see it tested out on the trails!
Love your videos and honesty in the hassles you encounter. Would really like to see you work on some ranchers and grizzly atv’s also. I have learned a lot from you. Thank you so much.
Another amazing video. There’s so much work shooting and editing these videos and you put out such high production quality! Plus you make the work look easy. You are a great craftsman with exceptional problem solving skills. I know this build has been challenging but you’ve learned a ton and passed on some great knowledge to your viewers as well. Thanks so much for the great content! Cheers from Canada.
That has to be the BEST! intro I’ve ever watched in my life 🤣🤣🤣 Hade me dieing. Hats off to you brother 🫡
Hahaha, glad you liked it man!
I love your attention to detail and also the foresight for future tear down. You’re pretty badass my dude.
All I can say after watching this is a big well done, bravo for keeping on working through all the problems you had, you faced them all head on and beat them 👏👏👏
“Things need to be tuned out, like needs a new transmission” 😂😂😂
RUclips seems like its always on a dry streak then BOOM! Mike the man saves the day with the lit videos. And they're 2 always an hour to two hours long. Diggin' the build, makes me want to finish this banshee and get a 660 next.
Best channel out of the hundreds of thousands on this app
Wow, that's a big compliment Nate; thank you for being a member and supporting too!
First off, your the man. I enjoy watching your vids bro. One thing I would love to see is you rebuilding a good utility-sports quad. Like picking up a used brute force 750, and doing a 840 kit on it. Turning it into a BA 4x4 machine. Your the man to do it.
You’ve really motivated me to build my own quads from just the frame and build them up to a pro quad
Glad I can motivate you; good luck with your pro quad build 🤘
@@MichaelSabo thanks! I’m a younger subscriber and have a Chinese quad but upgrading to a Honda soon so that will be the start of me rebuilding it and just making it a good quad
@@thetrainmaster.100 i have a atv bike to and dang its fast for a 125
chinese*
@@rebuildrookie how fast? My quad goes 25-30
Man that thing turned out gorgeous! Can't wait for the trail video on this beast. Knocked it out of the park again, Mike!
Introduction was so funny mate🤣🤣
Prolly the best intro to a video I’ve seen.
Great job! Great content
👆Thanks for watching and Commenting send a direct message right away we l've got something Special for you🎁
You have the most patience ever. I would've lost it.
This quad turned out amazing, wow, sounds great.
I like to call it organised clutter !! To everyone else it's a mess but to the trained eye it's magnificent!!!! A dream
Kinda cool to go to bed watching a 2 hour badass build instead of being asleep 2 minutes into the Hub 😏😉
I cryed 😭😭 all the little machines omg im gonna adopt one 😂
Excellent video all around! Content is awesome and the entire video is engaging. Great editing skills on top of sick mechanical knowledge. Can see myself binge watching these for sure!
Dude, when you cut that shock I was like WTF!!! LOLOLOL
👆Thanks for watching and Commenting send a direct message right away we l've got something Special for you🎁
The only guy I can watch for 2 hrs and not get bored lol 😝
Needed this vid when I started my raptor 660 project haha, all thats left is the electrical problems
Best looking quad i think I've seen you build. Thats a hell of a quad.
Yes you totally saved that thing brother. Cant wait for the next one!
You should use Hot start on handlebar for reverse switch with custom cable line as better control. Good work, Michael!
By far my favorite build yet!.. That thing is Sick!!.. Not sure what it is about it but it just got that look! Plus seems more realistic with all the problems working on that thing, makes it relatable for me, because that's how thing usually go for me..