Have had conversations with both Chris and Zach when I bought my RS1000 - Both great guys. Glad this video is posted because I messed up my settings and this got my squared away again quickly. Thanks!
I made the mistake of not trusting him and ended up learning everything he said myself the long way. I could have saved an hour 😂😂 Thanks for an awesome guide! TAKE HIS ADVICE.
The video contradicts itself. He says "you get HDR by not enabling HDR" then he leaves it on HDR enabled. Do you mean that the HDR enabled is supposed to be on but the picture setting is set to SDR 60Hz, or was it a mistake and you were supposed to disable HDR? Please clarify.
Not sure if this is exclusive (or at least somewhat exclusive) to JVC. Video made it seem that way. If that's the case, it'd probably be a good idea to mention that in the title.
hey, thanks for the video. I did as you suggested, activating match dynamic range and match frame rate but every time or almost every time I change page, or change film, or open an app, the projector (Benq tk850i) is very slow because apparently the frame rates is always different. I therefore disable the match frame rate and now I no longer have to wait every time I change content but only when a video switch from sdr to hdr or vice versa. Is this automatic frame rate so important? I don't seem to see any differences in the movies or anything even though it's now disabled. I don't seem to see any differences or issues in the movies even though it's disabled now. Thanks for your help!
Hey Everyone. I have an Apple TV 4K and I HIGHLY recommend these settings instead ... see below: Enable HDR: off Format: 4K SDR HDMI Output: RGB 0-255 Chroma: 4:4:4 Match Content: HDR = off Match Content: Frame Rate = on THEN ... make sure your projector setting is outputting RGB 0-255 and you will be all set and amazed. Try it out for yourself. No sky banding issues, no blown out areas and a very very crisp 4K image. True to color picture. PROJECTOR = 4K Optoma UHD65
Would this mean you never get hdr displayed at all, as enable hdr is off ? I have an Optoma uhz65lv and have banding issues when apple displays in 4K hdr, but no banding issues in 4K sdr. Is that the reason for your settings ?
Hi great info. I have an Optoma UHD60 and I’m using my Yamaha as the pass through for the projector. I can’t seem to get 4.4.4. Is it because of the Yamaha?
Chris I have Sony vow 325es 4k projector with Yamaha v6a receiver along w Amazon 4k firestick. I had pict when setting color bit to 8 bit but when setting to 10 bit no picture an I cannot retrieve on screen functioning of firestick. Any suggestions thanks
Hello question I have a Apple TV is possible to to have dual connection for my tv and proyector because each time I have see a show I have to change the conection from tv or proyector Please help hello I need your help I need to connect my Apple TV to my tv and proyector can I by a dual connection ori
I want to ask I have nx5 and when I turn frame adapt on at my Apple TV the images changes from dark to bright in the new movies like Dolby vision when I turn off frame adapt off it stays stable what’s the fix
Nice video guys. Just one question: what if with an APPLE TV 4K I own a JVC RS 49E? What are the correct settings? We are not all owners of brand new JVC PJs/equipment. We would appreciate if the gentleman from JVC can respond to this question. Thanks Dreamedia. Good job!
Hi, When i try to switch to Chroma 4::4:4. i get a blue screen. I am using epson tw7100 projector with denon 4k amplifier. And most importantly using 8k hdmi certified cable. Moreover not abke to activate 4k hdr also. Pls guide
Доброго времени суток! За видео жирный лайк. )) Я хочу приобрести проектор, для домашнего использования. точнее, для просмотра фильмов и игр. Цена вопроса от 100 тыс до 300 тыс. Мне очень важно, чтобы качество картинки было четкое и диагональ 120, 130. Помогите с выбором пожалуйста. Какой проектор лучше взять за эту сумму. Да и без эффекта радуги обязательно
Have had conversations with both Chris and Zach when I bought my RS1000 - Both great guys. Glad this video is posted because I messed up my settings and this got my squared away again quickly. Thanks!
I made the mistake of not trusting him and ended up learning everything he said myself the long way. I could have saved an hour 😂😂
Thanks for an awesome guide! TAKE HIS ADVICE.
Just as an aside. The picture quality on Space Force is outstanding. Great show too.
Really make a big difference! Great video. Now, my epson projector really make the screen looks like my macbook pro.
Very helpful!!! Thanks! This helped me figure out why Suits was playing darker on my AppleTV
The video contradicts itself. He says "you get HDR by not enabling HDR" then he leaves it on HDR enabled. Do you mean that the HDR enabled is supposed to be on but the picture setting is set to SDR 60Hz, or was it a mistake and you were supposed to disable HDR? Please clarify.
Can you do same video with Epson Projector LS11000 settings?
Does Sony 295 projector also do it automatically or do I need to make adjustments. Please do this with Sony 295.
I have the same question
Dolby vision does not come up for enabling on Apple TV with the new Epson LS12000. Do we just use 4K SDR?
good information . now we need the settings on a Roku and receiver
Can these settings be applicable to an epson 5050ub? Or could you possibly do a video for 5050ub?
Not sure if this is exclusive (or at least somewhat exclusive) to JVC. Video made it seem that way. If that's the case, it'd probably be a good idea to mention that in the title.
Question… how should the AV system Marantz be set for video pass through to the jvc projector
hey, thanks for the video. I did as you suggested, activating match dynamic range and match frame rate but every time or almost every time I change page, or change film, or open an app, the projector (Benq tk850i) is very slow because apparently the frame rates is always different. I therefore disable the match frame rate and now I no longer have to wait every time I change content but only when a video switch from sdr to hdr or vice versa. Is this automatic frame rate so important? I don't seem to see any differences in the movies or anything even though it's now disabled. I don't seem to see any differences or issues in the movies even though it's disabled now. Thanks for your help!
Hey Everyone. I have an Apple TV 4K and I HIGHLY recommend these settings instead ... see below:
Enable HDR: off
Format: 4K SDR
HDMI Output: RGB 0-255
Chroma: 4:4:4
Match Content: HDR = off
Match Content: Frame Rate = on
THEN ... make sure your projector setting is outputting RGB 0-255 and you will be all set and amazed.
Try it out for yourself. No sky banding issues, no blown out areas and a very very crisp 4K image. True to color picture.
PROJECTOR = 4K Optoma UHD65
Would this mean you never get hdr displayed at all, as enable hdr is off ? I have an Optoma uhz65lv and have banding issues when apple displays in 4K hdr, but no banding issues in 4K sdr. Is that the reason for your settings ?
Hi great info. I have an Optoma UHD60 and I’m using my Yamaha as the pass through for the projector. I can’t seem to get 4.4.4. Is it because of the Yamaha?
If follow your setting there will be no hdr, i think you can do that if your projector not support hdr.
Are these settings needs to be reevaluated with apple HDR 10+ 4k tv?
Thanks guys for the help!!
Chris I have Sony vow 325es 4k projector with Yamaha v6a receiver along w Amazon 4k firestick. I had pict when setting color bit to 8 bit but when setting to 10 bit no picture an I cannot retrieve on screen functioning of firestick. Any suggestions thanks
I can't decide whether to get apple tv 4k or fire tv cube for my 4k projector. Do u have any suggestions?
This was pretty helpful. Thanks guys.
My projector will not show 4 4 4. I got new fiber optic8k cable epson 5050 4k shift. Is it the cable or projector
I have the epson 4010 and is no take 4.4.4 either
Hello question I have a Apple TV is possible to to have dual connection for my tv and proyector because each time I have see a show I have to change the conection from tv or proyector
Please help hello I need your help
I need to connect my Apple TV to my tv and proyector can I by a dual connection ori
I want to ask I have nx5 and when I turn frame adapt on at my Apple TV the images changes from dark to bright in the new movies like Dolby vision when I turn off frame adapt off it stays stable what’s the fix
Nice video guys. Just one question: what if with an APPLE TV 4K I own a JVC RS 49E? What are the correct settings? We are not all owners of brand new JVC PJs/equipment. We would appreciate if the gentleman from JVC can respond to this question. Thanks Dreamedia. Good job!
Should have show how you get to that screen to test HDMI test connection
Do you het 4k content through the Apple TV 4k with a projector?
What are the best settings for a Full HD Projector like the epson eh tw 5600?
Hi,
When i try to switch to Chroma 4::4:4. i get a blue screen. I am using epson tw7100 projector with denon 4k amplifier. And most importantly using 8k hdmi certified cable. Moreover not abke to activate 4k hdr also.
Pls guide
Guys! Could advice setting on AVR. I have Denon X8500 and Sony VPL-VW360ES
Thx
Does anyone else have issues when trying to switch over to Apple TV (by HDMI) from an Xgimi Halo?
The match content helps a lot, but I can’t get my Apple TV to do 4K 60 sdr
Alton Moore II It’s most likely your hdmi cable, which cant output 4K 60hz. Check if it does 1080p 60hz.
Netflix has some series recorded in 50hz
Доброго времени суток! За видео жирный лайк. )) Я хочу приобрести проектор, для домашнего использования. точнее, для просмотра фильмов и игр. Цена вопроса от 100 тыс до 300 тыс. Мне очень важно, чтобы качество картинки было четкое и диагональ 120, 130. Помогите с выбором пожалуйста. Какой проектор лучше взять за эту сумму. Да и без эффекта радуги обязательно
Will this apply to the Epson LS12000?