How to Replace Neutral Safety Switch 1998-2011 Ford Ranger
HTML-код
- Опубликовано: 21 июн 2021
- Buy Now!
New Neutral Safety Switch from 1AAuto.com 1aau.to/ia/1AZNS00012
The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle! This video shows you how to install a new neutral safety switch in your 1998-2011 Ford Ranger.
• Check here for more videos on the 1998-2011 Ford Ranger: • Ford Ranger 1998-2011 ...
This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 21mm Socket 1aau.to/oa/1AXAA00043
• Locking Pliers 1aau.to/oa/1AXAA00139
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Ford Ranger 1998-2011 3rd Generation: • Ford Ranger 1998-2011 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
U are a good mechanic and also a good teacher and I like the u walking through the whole idea just keep it up good man
The tutorial made easy work of the job. I tried my best on my back to mark where the existing bolts were mounted and marked its location, scribed that onto the new NSS. When I installed it, again on my back, something shifted. So my initial start didnt happen in nuetral. I fixed the rotation of the NSS and now it fires up in P and N but I have a check engine light on now, from what ive read because neutral was not recognized. How do I remedy the check engine light? Also important to note, this change made the shifting very easy and positive at the shift lever compared to difficult/sticky/crunchy/vague before the new part was installed. Thanks!
After I adjusted the neutral safety switch to the correct position, the check engine light went off after maybe 10 miles of driving. Now its smooth and so far so good. Thanks
Is this the same as a 2011 f150? My truck won't start when the indicator doesn't show its in park. I been at this issue for weeks and just came across this solution. I'm excited. I hope this fixes the issue.
Does this have anything to do with the reverse lights not working?
nicely explained
Thank you very much. I can't put my truck in gear, could this be the problem. The tow truck guy was able to put it in gear but only for a few days.
Awesome thanks
The shaft from the transmission now spins because it was so tight when taking off neutral switch.do you know if i can take the trans pan off and put back in place.I hope i didnt ruin the trans.
Thanks! Next, replace the bed sides, frame, crossmembers and all metal on the truck 😅
Thanks
How do you change the shifter cable?
What size bolt is that for the neutral safety switch?
7/8
What if he can't get that plastic piece that goes over the shaft off everything else comes off it came in pieces
How to remove the seal ?
When would you want to replace this??!
When the safety switch goes out the Vehicle will not want to start with the key
@@joyfulbeatrix YUPP mine did this yesterday. Replaced battery and starter and now about to do this after watching the video
Where is this sensor in 2011 ford f150 ?
+Franko Simon This part is generally located by the shifter in the vehicle.
Says that it doesn't fit a 1999 Ford Ranger
Why this only hs 31k views idk
How many views should it have? 😐