Hi guys. Welcome to my channel please feel free to leave a comment below. All comments will be replied to. The only thing I ask is you be respectful to each other. We all have a common interest in the game and lifestyle of Airsoft. So stay safe and bring on the Booom
An amazing and such an in-depth review. Respect to you for so much attention to detail, this has been a great source of info. All the best from North Wales ;)
I did do a sound test but doing it in the House was not good as the sound only bounced off the walls and seemed louder than when I did it out side. But on the day it was too windy for a good sound test.
Went from 0.3 & 0.32's and tried some 0.4 and yep what a difference.. Have a few bottles on order now for the MTW..Such an awesome bit of kit. Thanks for vid & advice. :)
Thanks Josh. The one thing that I’ll say and it’s very important. When you get your MTW and barrel and M4W hop……. Make sure you set the Dwel right or your BB’s will be all over the place and make sure you use it at least 1 every few weeks because if you leave it any longer the Dwel can go back to zero and it will have to be reset again. Just keep that in mind, it’s important
No the Dwel is fine turning the right amount of air that the solinade lets threw the barrel. It’s super important to get it set right. If you go onto Wolverine they will show ya no problem
Fair point....... but Hobbyairsoft are doing the Spena arms BB .30’s at €12 for a 1KG bag....... or €24 for 3 bags........ even if ya went up to the .30’s it would be better than nothing. Plus if you can get a group of lads to go in with ya for heavier BB’s and order in bulk it will bring the cost down a bit.......
Hi Jerry. I love the MTW…… but some of my mates have the SSX303 and like it a lot but used the Primary airsoft HPA adaptor to make it better and put in an upgraded return nozzle spring. I have tried the HPAed SSX303 and was not a fan…….. but that’s just me. Thanks for taking the time to watch the video and comment
congratulations for the video, I have a doubt that when I connect the battery and close the gun sometimes it doesn't work there is some procedure I'm forgetting to do
Thanks bro. Are you stripping your rifle every time you go to play.....??? If you are there are a few things that you can do. First thing is have a look at the two springs in the lower that is sticking up. And make sure that they are not flattened down, as they need to make contact with the two screws in the engine in the upper. Put your rifle back together and make sure the springs are touching the screws....... then put the battery in and test it. If it’s still not working open it up and stretch the springs a little...... and I mean just a little, and put it back together again and put the battery back in. Doing this while the battery is in is not good. That should fix the problem. Make sure the battery is fully charged as well. I hope that helps. Let me know how ya get on ok. 💪
What range your MTW will get will depend on your joule limit. In Ireland im using BLS BB’s and they are .36’s. They are the best for range at 1 joule. The heavier BB’s will be more accurate, you will just have to rest for range and see what works best for you
My buddy and I came to pretty much the same conclusion. .32s performed better than .28s with only a slighlty greater cost, and .43s performed better than the .40s for roughly the same increase. The extra five feet of range going up to the .36s wasnt worth the price increase from the .32s, so thats what we use for our 'standard' rifles. Our DMRs, we use the .43s and can hit a mans chest consistantly at 250', while consistantly hitting the body (shoulders to thighs) at 285'. We are out ranging most of the snipers on the field and easily outranging every AEG. Definately worth the investment.
Hay bro. Nice to see you did some testing for your country and your limits. It’s great when you out range people..... it drives them nuts but worth every penny. I’m glad you found the video helpful and thanks for the comment...... 💪💪💪
@@Notjudecamberos Hey Jude. That is with my 10" model ( i had a 14" DMR AEG before, and with a can it was way too hard to work around trees and cover) with a supressor and Phoenix Hop. The Phoenix hop helps tremendously with the heavier BBs. I will eventually post a video on my channel about my rifles,but at the moment, my PC is too old and slow and is taking HOURS to make a simple edit on another review im doing. I also bought a 7" MTW a little while ago for my 'assault' setup and it is all still stock. Shooting .32s through the MTW gives you a definate edge over AEGS shooting .20s and .28s.
oh wow cool, do you use the forged edition? also what Jules you are getting? Can you share your PSI settings and such? i am planning on getting 10" forged one
Yes both rifles are at 1joule. I did have a scope camera on the MTW........ but the cold drained the battery so I could not use the camera....... sorry
Hi Adrian, personally I think the 14 is too long as for range and accuracy that will be down to your hop and bucking and barrel. I have the billet and do not thing the forged is worth the cash
Loved this video prefer the range test something more interesting good man keeping us all entertained threw lock down can't wait to game with ya battle brother and can NOT wait to shoot them mean fucking machines haha fair play kid
@@ManiaAirsoft totally get that (and I believe we wil starting testing in joules pretty soon in belgium), but i've noticed that i'm not reaching the 320 fps that i'm allowed to have with .40 BB's with the regulator all the way open. Since not a lot of people use the wraith aero stock here I dont have anything to compare to (if mine needs fixing or not)
I changed out the stock barrel and put in a PDI 6.01 into it that will give you an extra bit of FPS for sure. If you mail the guys in Wolverine I’m sure they will have some ideas that could help
Getting this kind of range really depends on how stable your FPS is. AEG’s just bounce way too much for my liking, where as HPA can be turned up or down so you can get the max out of your weapon and with a very good barrel and hop and bucking you can get amazing range with heavy BB’s
@@ManiaAirsoft i am planning on getting the new MTW forged 10"(NOT milspec). Any idea what's the maximum J i would be able to pull off? It has 285mm barrel but no idea what's the internal diameter. The limit in my contry is 1.9J From the shop you recommend powair6
@@ManiaAirsoft oh and another question if you will :) are there any highcap mags that are compatible with MTW? You know the ones you can just pour BBs in
The max joule limit I do not know. You would be best to ask the guys in Powair6 they will get back to ya with that information. As for mags. I use the Wolverine mags. As for what works best I’m not 100% sure. But if your on Facebook there are a few Wolverine groups you can join and ask questions and the guys in the group are very helpful
Hi Tyler. Yes I have a 6.01 stainless steel PDI inner barrel, the MAXX hop Pro and a G&G green. But I’m going to change it to the Maple leaf Mr hop 50 or the 2021 silicone 50. No I have not set the dwell for the higher weight BB’s..... for the video I did change the psi for the weights to keep it under the joule limit.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Hi guys. Welcome to my channel please feel free to leave a comment below. All comments will be replied to. The only thing I ask is you be respectful to each other. We all have a common interest in the game and lifestyle of Airsoft. So stay safe and bring on the Booom
An amazing and such an in-depth review. Respect to you for so much attention to detail, this has been a great source of info. All the best from North Wales ;)
Thanks bro……. I’m glad you found it helpful 😁😁😁
Way more helpful than all these videos that just talk about it. More videos like this I have no doubt you'll explode
Thanks bro. I’ll be working on more soon
Definitely agree with that,at the end of the day we want to see the rifle in action properly.Grest video
Awesome vid mate, I've just ordered my Billet and a few bags of 0.4s :) Subbed
Thanks bro, glad ya liked the video and thanks for the Sub
Awesome range test. Heavier BB's all day long pal.. Would love to see a decibal test to see how loud it is!! Keep pumping out the vids
I did do a sound test but doing it in the House was not good as the sound only bounced off the walls and seemed louder than when I did it out side. But on the day it was too windy for a good sound test.
Once again, another brilliant video, full of information!
Thanks bro. Another video out tonight
Went from 0.3 & 0.32's and tried some 0.4 and yep what a difference.. Have a few bottles on order now for the MTW..Such an awesome bit of kit. Thanks for vid & advice. :)
No problem at all bro. I’m glad your getting the most out of your MTW
So .4's did great? Same distance?
Nice one man very intresting 👍
Thanks buddy, I hope I got your BB weight right
Interesting video, well done Taz
Thank you..... 😁😁😁
cheers for this, i want a new gun my mws is shit past 40m and this has sold it for me
Thanks Josh. The one thing that I’ll say and it’s very important. When you get your MTW and barrel and M4W hop……. Make sure you set the Dwel right or your BB’s will be all over the place and make sure you use it at least 1 every few weeks because if you leave it any longer the Dwel can go back to zero and it will have to be reset again. Just keep that in mind, it’s important
@@ManiaAirsoft is the dwel the hob up wheel? thanks for the reply mate
No the Dwel is fine turning the right amount of air that the solinade lets threw the barrel. It’s super important to get it set right. If you go onto Wolverine they will show ya no problem
Great video, the only problem with the heavier BBs is cost, less of an issue with bolt action rifs.
Fair point....... but Hobbyairsoft are doing the Spena arms BB .30’s at €12 for a 1KG bag....... or €24 for 3 bags........ even if ya went up to the .30’s it would be better than nothing. Plus if you can get a group of lads to go in with ya for heavier BB’s and order in bulk it will bring the cost down a bit.......
Hi.Firstly a really indepth review.This gun seems to be the only gun that an aspiring airsoft needs.Havent even tried out my Novritsch SSX303 yet🤔.
Hi Jerry. I love the MTW…… but some of my mates have the SSX303 and like it a lot but used the Primary airsoft HPA adaptor to make it better and put in an upgraded return nozzle spring. I have tried the HPAed SSX303 and was not a fan…….. but that’s just me. Thanks for taking the time to watch the video and comment
Hello.
Can you please tell me what MTW version you have,im thinking of getting one.
Im doing my research etc.
Thanks
I’m using a Gen 1 Billet. The new Gen 3 is out and it’s a lot better than the Gen 1. Well worth the money
How much PSI do you have on the regulator in the tests ?
congratulations for the video, I have a doubt that when I connect the battery and close the gun sometimes it doesn't work there is some procedure I'm forgetting to do
Thanks bro. Are you stripping your rifle every time you go to play.....??? If you are there are a few things that you can do. First thing is have a look at the two springs in the lower that is sticking up. And make sure that they are not flattened down, as they need to make contact with the two screws in the engine in the upper. Put your rifle back together and make sure the springs are touching the screws....... then put the battery in and test it. If it’s still not working open it up and stretch the springs a little...... and I mean just a little, and put it back together again and put the battery back in. Doing this while the battery is in is not good. That should fix the problem. Make sure the battery is fully charged as well. I hope that helps. Let me know how ya get on ok. 💪
@@ManiaAirsoft thanks for the help I'm Brazilian and to playing a little while ago
I hope that helped
@@ManiaAirsoft which bb do you recommend me to use mtw forget 14 and what is the maximum distance it can reach accurately
What range your MTW will get will depend on your joule limit. In Ireland im using BLS BB’s and they are .36’s. They are the best for range at 1 joule. The heavier BB’s will be more accurate, you will just have to rest for range and see what works best for you
Good video taz I'll definitely be switching to the heavier weight bb in my guardian
Thanks bro. Yeah defo jumping up in weight for the DMR set up
What is more accurate your krytac or mtw
They both have had a good few up grades to date and they are both in and around the same. But that is a very good question……
My buddy and I came to pretty much the same conclusion. .32s performed better than .28s with only a slighlty greater cost, and .43s performed better than the .40s for roughly the same increase. The extra five feet of range going up to the .36s wasnt worth the price increase from the .32s, so thats what we use for our 'standard' rifles. Our DMRs, we use the .43s and can hit a mans chest consistantly at 250', while consistantly hitting the body (shoulders to thighs) at 285'. We are out ranging most of the snipers on the field and easily outranging every AEG.
Definately worth the investment.
Hay bro. Nice to see you did some testing for your country and your limits. It’s great when you out range people..... it drives them nuts but worth every penny. I’m glad you found the video helpful and thanks for the comment...... 💪💪💪
Military Dad, is this with the stock or phoenix hop-up? I want to pull the trigger on a 14" mtw myself (literally and metaphorically)
@@Notjudecamberos
Hey Jude.
That is with my 10" model ( i had a 14" DMR AEG before, and with a can it was way too hard to work around trees and cover) with a supressor and Phoenix Hop. The Phoenix hop helps tremendously with the heavier BBs.
I will eventually post a video on my channel about my rifles,but at the moment, my PC is too old and slow and is taking HOURS to make a simple edit on another review im doing.
I also bought a 7" MTW a little while ago for my 'assault' setup and it is all still stock. Shooting .32s through the MTW gives you a definate edge over AEGS shooting .20s and .28s.
In denmark with the jules we use, I get my MTW 10" to 80 meters ;) 0,36 is the sweet spot!
Ooohhh wow....... I would love a higher limit but our laws in Ireland are 1 joulie across the board on all weapons
@@ManiaAirsoft Yeah In denmark our snipers are 4-6 jules.. and assult goes from o -1.96 jules ;D
edit: ow yeah free bb weight,... :D
oh wow cool, do you use the forged edition? also what Jules you are getting? Can you share your PSI settings and such? i am planning on getting 10" forged one
Ordered my MTW forged 10 inches...where did you get that line protection please?
The line protectors are just hydro line covers. You can get them on eBay
@@ManiaAirsoft i know i am a pain...link please i cant find it...btw love your videos and your ideas...how many mags do you run?
www.skirmshop.co.uk/hydrationhpa-tube-cover-green.html
And for a 5% discount mania5.
I run 8 120rnd mags
Would there be much difference in .20s and the heavier bbs in a 0.9 Joule AEG rifle?
Oh hell yeah.......... if ya want to meet up one of the days we can do a range test with the heavier weight BB’s and you will be amazed.
Would of been nice to have seen the bb flight path
Yes it would of been, but the Runcam scope camera 25mm is a short range camera.
Wow. I don't know of any other stock "rifleman class" rifles that could hit that barrel so consistently.
The platform is amazing, you could not ask for better. Plus with a few up graded it gets better a lot better……
@@ManiaAirsoft
What kind of upgrades?
The inner barrel is a 6.01 PDI the hop is the MAXX hop M4W the bucking is a Maple leaf macron 60
@@ManiaAirsoft
Thanks!
1 joule ?? Both rifs
Yes both rifles are at 1joule. I did have a scope camera on the MTW........ but the cold drained the battery so I could not use the camera....... sorry
@@ManiaAirsoft thanks again
No problem bro
Did you reduce psi to compensate for joule creep?
To be honest I can’t remember...... that is something that I would have to look at. Very good question
I run my MTW 7inch with 0.48g bbs 1.14j and I can get an effective range of 65-75m with a max range of 80-85m.
Defo going to go up in weight cheers taz
It’s well worth it Pauly
Hi, thinking about getting an MTW which is best the 10 or 14. Looking for range and accuracy. Is the forged worth extra cash?
Hi Adrian, personally I think the 14 is too long as for range and accuracy that will be down to your hop and bucking and barrel. I have the billet and do not thing the forged is worth the cash
Nice job mate
Thanks bro
hey, what hop up setup are you using inside your mtw during this test? Did you change anything or is it stock?
Hay bro. The hop unit I’m using is the MAXX Pro the bucking is a Maple leaf Mr hop 50 degrees. But I’m looking to try the SRhop from Skrimshop
Loved this video prefer the range test something more interesting good man keeping us all entertained threw lock down can't wait to game with ya battle brother and can NOT wait to shoot them mean fucking machines haha fair play kid
Thanks brother...... don’t worry we will get out soon enough
Hey, how many fps do you get with the .40 bb's?
To be honest I don’t know. Your best off testing your self. I crono in joules and not FPS as it a better way of testing your rifles limits.
@@ManiaAirsoft totally get that (and I believe we wil starting testing in joules pretty soon in belgium), but i've noticed that i'm not reaching the 320 fps that i'm allowed to have with .40 BB's with the regulator all the way open. Since not a lot of people use the wraith aero stock here I dont have anything to compare to (if mine needs fixing or not)
I changed out the stock barrel and put in a PDI 6.01 into it that will give you an extra bit of FPS for sure. If you mail the guys in Wolverine I’m sure they will have some ideas that could help
Impressive range for 1 Joule really
Getting this kind of range really depends on how stable your FPS is. AEG’s just bounce way too much for my liking, where as HPA can be turned up or down so you can get the max out of your weapon and with a very good barrel and hop and bucking you can get amazing range with heavy BB’s
@@ManiaAirsoft i am planning on getting the new MTW forged 10"(NOT milspec). Any idea what's the maximum J i would be able to pull off? It has 285mm barrel but no idea what's the internal diameter. The limit in my contry is 1.9J
From the shop you recommend powair6
@@ManiaAirsoft oh and another question if you will :) are there any highcap mags that are compatible with MTW? You know the ones you can just pour BBs in
The max joule limit I do not know. You would be best to ask the guys in Powair6 they will get back to ya with that information.
As for mags. I use the Wolverine mags. As for what works best I’m not 100% sure. But if your on Facebook there are a few Wolverine groups you can join and ask questions and the guys in the group are very helpful
Are there upgrades in the gun? Also did you change psi? Or your fcu dwell setting for a certain bb weight ?
Hi Tyler. Yes I have a 6.01 stainless steel PDI inner barrel, the MAXX hop Pro and a G&G green. But I’m going to change it to the Maple leaf Mr hop 50 or the 2021 silicone 50. No I have not set the dwell for the higher weight BB’s..... for the video I did change the psi for the weights to keep it under the joule limit.
If you record vertically then upload the video vertically
This thing is a laser beam🤣🤣👌
Thanks buddy. My mate AKAStaten confirmed a kill at 62 meters in a site there for me a few weeks ago. Was very happy
Nice!
Thanks bro
👌👌Make more videos bro 👌👌👌
👌 Get like get coment on this ! Airsoft Beast sport ewer ! 👌
👌👌What you mean about me airsoft videos 👌👌
Thanks buddy I’ll keep getting videos out don’t worry...... 💪💪