Glad I ran across this tool. Not only will this work to get rid of some sags I have on my topper, but think about all the rock chips it can help remove after they have been touched up with base/clear. Sure beats the heck out of spot sanding them smooth. Word of caution though, Don't Drop IT! Carbide holds an edge for a very long time, but it is also brittle and can shatter if dropped. I have two carbide scribes. Use to have one, then dropped it off the work bench.
I just got it, need to fill some rock chips, I hope it works like you said. I paid 85 fazools, but I think it pays for itself in extra equipment, tools and time. Let's see. Thanks for the video.
The first run I tried removing with this tool I ruined. Since then I've used it on nibs with success. I still prefer a bent razor blade with fine tape on either corner for runs though. I've also tried regular nib files with varying success but still prefer the trusty blade. I'm waiting for a good opportunity to try the polyester filler trick that many swear by. I just don't have the balls fo take 320 to fresh paint work lol.
When you put putty on them it can stain the paint and print it, unless really cured dry. I still use tape and 400 grit wetsand on up through to 1500. And of course 3000 5000 amd 8000
Great video...I have seen this before but where the HECK do you buy it ? The only place I see is online from Australia at $101 (not sure if that us US dollars). Is there any US distributor ? Thanks and thanks for the great demo
Robert Arco it is a 3M product so you may be able to contact them directly. If you have a auto body supply store in your area they may be able to get one for you if they are a 3M distributor. I got mine at English Color Supply in Murfreesboro, TN. There number is 1-615-893-2780, you can contact them and see if they will ship you one. Thanks for watching and have a great day.
These seem to have came down well in price in the UK at least. They're around £53 now I think I remember them being £85+ . The Mirka Shark Blade alternative is under £30.
Do you think this tool would work on rounded areas? I have a good run/sag on the rounded portion of the wheel fender flare on my 1/4 panel. I put on four coats of clear so I have lots to work with.
@@seabass295videos6 I did end up buying this tool over a year ago. It saved my rookie paint job and was well worth the money! I'm still referring others to your video and this awesome tool. Thanks
Yes it can, but the blade does flex, and dulls quickly and can ruin the finish in a blink of an eye. Been there, done that, cussed worse than a drunken sailor. This is actually a very useful product even for a regular car guy.
Great video thanks! Can’t believe the battles and re works I’ve had over the years and I never knew about these tools! I’m searching for one now!! 👍
Good video. Thanks for taking the time to post. I've just purchased one to do stone chips.
Dude you’re awesome. Thanks for the I’m depth review, and actually showing it work. 👏
Got one today, 57.00$ they said it was collecting to much dust and let me have it at cost. It’s a great tool. Slick paint work BTW.
Glad I ran across this tool. Not only will this work to get rid of some sags I have on my topper, but think about all the rock chips it can help remove after they have been touched up with base/clear. Sure beats the heck out of spot sanding them smooth. Word of caution though, Don't Drop IT! Carbide holds an edge for a very long time, but it is also brittle and can shatter if dropped. I have two carbide scribes. Use to have one, then dropped it off the work bench.
That tool looks fantastic! Thank you. Great review
Great demonstration sir; i greatly appreciated this video and will be sourcing this tool.
Doug H glad this video was helpful. Thanks for watching.
I use Festool paint nib it work well for me and last long not like other paint nibs get blunt , good job mate.
I just got it, need to fill some rock chips, I hope it works like you said. I paid 85 fazools, but I think it pays for itself in extra equipment, tools and time. Let's see. Thanks for the video.
Dang! That came out great!👌🏾 thanks for the video brotha
I'm sold looks like a great tool .great video.
These work great, i have had great success with getting runs out with this tool. You will need some patience!
Amazing im blown away. Thanks for the video
Taufan Giovanni thanks for watching.
Might have to try this , I’ve been using the razor blade method
The first run I tried removing with this tool I ruined. Since then I've used it on nibs with success. I still prefer a bent razor blade with fine tape on either corner for runs though. I've also tried regular nib files with varying success but still prefer the trusty blade. I'm waiting for a good opportunity to try the polyester filler trick that many swear by. I just don't have the balls fo take 320 to fresh paint work lol.
When you put putty on them it can stain the paint and print it, unless really cured dry. I still use tape and 400 grit wetsand on up through to 1500. And of course 3000 5000 amd 8000
You painted that Nissan hard body bed in your garage? Wow it came out nice.....what kinda gun did you use hvlp or lvlp? ?
Trent Dawg I used a LVLP gun. Thanks for watching
Great video...I have seen this before but where the HECK do you buy it ? The only place I see is online from Australia at $101 (not sure if that us US dollars). Is there any US distributor ? Thanks and thanks for the great demo
Robert Arco it is a 3M product so you may be able to contact them directly. If you have a auto body supply store in your area they may be able to get one for you if they are a 3M distributor. I got mine at English Color Supply in Murfreesboro, TN. There number is 1-615-893-2780, you can contact them and see if they will ship you one. Thanks for watching and have a great day.
These seem to have came down well in price in the UK at least. They're around £53 now I think I remember them being £85+ . The Mirka Shark Blade alternative is under £30.
Philip Black they are actually hard to find in the US. I got mine from the auto body retail shop who received it as a demo. Thanks for watching.
Thanks
So it didnt take all the clear off that spot?
amazing
Nice video you should have showed the whole process could have learned the whole process
The tool is meant to be flat, resting on the string. Not 35 degrees. It's also not meant to be dragged along such large passes.
I cant find one on the website. whats the part # and where are you located maybe i can contact your paint store and purchase one.
Dwan Ogletree I got it at English Color and Supply in Murfreesboro Tennessee. Thanks for watching!
www.festoolproducts.com
How is it any different from a razor blade? Seems way overpriced and marketed with hype. I'm not convinced.
Do you think this tool would work on rounded areas? I have a good run/sag on the rounded portion of the wheel fender flare on my 1/4 panel. I put on four coats of clear so I have lots to work with.
I have used it on rounded areas. Just be light to the touch using it. Thanks
@@seabass295videos6 I did end up buying this tool over a year ago. It saved my rookie paint job and was well worth the money! I'm still referring others to your video and this awesome tool. Thanks
I restore antique cars. I'll definitely be getting one of these and trying it out.
That must of been 3 days hard?
rick maston yea it was still pretty fresh. Thanks for watching.
too expensive what it is. modified Razor blades are 1/100th of the cost
I use bondo...
a razor blade with tape on the ends does the same thing
Yes it can, but the blade does flex, and dulls quickly and can ruin the finish in a blink of an eye. Been there, done that, cussed worse than a drunken sailor. This is actually a very useful product even for a regular car guy.
A razor blade less than a dollar.
overpriced razor blade
😂🤣🤣😅😅 WTF .
Stay away from painting
I can't Stop Laughing.
Great drinking Video
😂🤣🤣😅
Wow you're a huge tool.
@@churst211 You're a Noob and probably his brother 😂😂🤣