Thank you for the informative video . Could you confirm in step G is the same for micro beast X as Beast X . Once swash is level and blades at zero . d Don`t touch sticks or change status of servo last used in adjustement . But just hole set up button till H lights up . Thu Lou A+
This being a setup tutorial a good start forus newbies to flybarless would be tranmitter settings and binding to unit which i assume has to be done before unit setup would start.
Exatamente, estou tentando configurar o Microbeast Plus v4.2 com o rádio Futaba14SG e o receptor R7008SB pela primeira vez. FASSTest-2.4GHz, e não consigo conectar os cabos e não tenho certeza se estão corretos, pois fiz a seguinte conexão: Fiz as conexões conforme abaixo: Eu conectei a bateria no Switch e a outra extremidade do switch no canal SYS do Microbeast Plus V4.2 No Microbeast Plus V4.2, o ELE / DI1, na porta SBUS. Depois de fazer isso, liguei o interruptor pressionando o botão do Microbeast Plus V4.2. 1 - O menu A começa a piscar e o botão Microbeast Plus V4.2 é liberado e a luz piloto começa. 2 - Pressione o botão Microbeast por 2 segundos até que a luz piloto fique vermelha. Depois disso, nada acontece, de acordo com os vídeos, a luz do Menu B fica azul reconhecendo o tipo de receptor, MAS no meu caso isso não acontece. E assim, eu não posso fazer mais nada, e não há uma alma no planeta para mostrar se estou fazendo certo ou dando alguma ideia para acertar os passos. Eu nunca vou usar essa unidade Microbeast Plu V4.2
how do you adjust the servo in servo centering using the cyclic stick , trim ??? i am ditching the old vbar sensor in my align 700e and would like to instal a beast rx
I can not enter the setup menu (solid LED). I hold the button for 2 or 3 seconds. It's supposed to stop flashing but never does. What can I do to solve this problem? Thank you.
I get a tail kick to the right, nose left. And it centers quick. Not tailwag. What could be the problem, i put everything right according to the instruction for the ar7200bx setup. Is the parameter for tail compensation the next step for me? Or should i create a straight throttle curve for constant headspeed. I got the throtte an pitchcurves maybe a little bit to mixed and throttle gives collective at the same time. Meaning maybe the tail is left behind.
Hi Robert. Our Heli tech added this reply: "The beast does have some pre comp that can be programmed in to attempt to help with that customers issue. It will be a trial and error process - program it, test it, rinse and repeat..but yea he is onto the right idea." Hope that helps. -Brett
@@AMain_Hobbies I just took it outside. Problem solved, i needed a straight throttle curve 0-80-80-80-80. No more tailkick. 0-90-90-90-90 for my trex500 is to much. It's going in a scale fuselage. Pitchcurve set at 20-35-50-75-100. Including throttlecut.
Thank you for the informative video . Could you confirm in step G is the same for micro beast X as Beast X . Once swash is level and blades at zero . d
Don`t touch sticks or change status of servo last used in adjustement . But just hole set up button till H lights up . Thu Lou A+
Is this the same BeastX that comes on the Align T-REX 470LM Dominator Super Combo?
this thing will not hold the compass on either setting and the tail blows out when hard climb out?
This being a setup tutorial a good start forus newbies to flybarless would be tranmitter settings and binding to unit which i assume has to be done before unit setup would start.
Exatamente, estou tentando configurar o Microbeast Plus v4.2 com o rádio Futaba14SG e o receptor R7008SB pela primeira vez.
FASSTest-2.4GHz, e não consigo conectar os cabos e não tenho certeza se estão corretos, pois fiz a seguinte conexão: Fiz as conexões conforme abaixo:
Eu conectei a bateria no Switch e a outra extremidade do switch no canal SYS do Microbeast Plus V4.2
No Microbeast Plus V4.2, o ELE / DI1, na porta SBUS.
Depois de fazer isso, liguei o interruptor pressionando o botão do Microbeast Plus V4.2.
1 - O menu A começa a piscar e o botão Microbeast Plus V4.2 é liberado e a luz piloto começa.
2 - Pressione o botão Microbeast por 2 segundos até que a luz piloto fique vermelha.
Depois disso, nada acontece, de acordo com os vídeos, a luz do Menu B fica azul reconhecendo o tipo de receptor, MAS no meu caso isso não acontece. E assim, eu não posso fazer mais nada, e não há uma alma no planeta para mostrar se estou fazendo certo ou dando alguma ideia para acertar os passos. Eu nunca vou usar essa unidade Microbeast Plu V4.2
how do you adjust the servo in servo centering using the cyclic stick , trim ??? i am ditching the old vbar sensor in my align 700e and would like to instal a beast rx
Hi Joseph. Our Heli tech has noted that both servo centering, and trim are adjusted during set up, and after test flights. Hope this helps.
-Brett
This may be a stupid question......So is this setup the exact same as the AR7300BX?
This is SO helpful. Very cool.
Very nice video, keep them coming
Cool, I'm digging these videos.
I can not enter the setup menu (solid LED). I hold the button for 2 or 3 seconds. It's supposed to stop flashing but never does. What can I do to solve this problem? Thank you.
I get a tail kick to the right, nose left. And it centers quick. Not tailwag. What could be the problem, i put everything right according to the instruction for the ar7200bx setup. Is the parameter for tail compensation the next step for me? Or should i create a straight throttle curve for constant headspeed. I got the throtte an pitchcurves maybe a little bit to mixed and throttle gives collective at the same time. Meaning maybe the tail is left behind.
Hi Robert. Our Heli tech added this reply:
"The beast does have some pre comp that can be programmed in to attempt to help with that customers issue. It will be a trial and error process - program it, test it, rinse and repeat..but yea he is onto the right idea."
Hope that helps.
-Brett
@@AMain_Hobbies Thank you very much for your help and time. I will try the precomp settings.
@@AMain_Hobbies I just took it outside. Problem solved, i needed a straight throttle curve 0-80-80-80-80. No more tailkick. 0-90-90-90-90 for my trex500 is to much. It's going in a scale fuselage. Pitchcurve set at 20-35-50-75-100. Including throttlecut.
Great! Glad that helped Robert.
-Brett
Awesome job!!
Great Stuff!
That things a monster!
Where's part 2
Thank you!
please kill the music in these videos. it's an annoying distraction and it's improperly mixed with your voice, ie. it's drowning your voice. thanks!
Yeah I agree! Why do people put on annoying music when giving important instructions. Very good videos though and helpful.
Are you any kin to Jeremy McGrath?
Brill video.
AR7200BX TREX 550L
Never mind I found it