SOLVING THE NINTENDO SWITCH WIFI 2110-1118 ERROR
HTML-код
- Опубликовано: 13 июл 2024
- This video will show you how to fix the 2110-1118 error on the Nintendo Switch.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TIME STAMP
00:00 START
00:18 INTRO
00:29 THE SYMPTOMS
00:53 INSPECTING THE CONSOLE
01:12 DISASSEMBLING THE CONSOLE
01:35 REFLOWING THE CHIP
02:26 REMOVING THE CHIP
03:54 GETTING A REPLACEMENT NETWORK CHIP
05:03 SOLDERING THE NETWORK CHIP TO THE MOTHERBOARD
06:07 TESTING THE NETWORK CHIP
07:21 OUTRO
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TOOLS USED IN THE VIDEO
- iFixit Pro Tech Toolkit PH00 and Y00 - shorturl.at/lu1GW
- Mijing T23 Pro PCB Holder - shorturl.at/eZzIs
- Amaoe Nintendo Switch stencil - shorturl.at/gHmqG
- Aoyue 968 shorturl.at/ibb4F
- Solder Paste : shorturl.at/kR9DQ
- Stirri V3 flux : shorturl.at/aoZMA
- iFixit Tweezer : tiny.cc/fyk6yz
- Aluminum tape tiny.cc/5yk6yz
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MUSIC
elements.envato.com/backgroun...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CONTACT & DONATION
linktr.ee/sthetixofficial
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ 
Игры
im not even having this issue but i like watching your videos. I appreaciate how they're so informative and easy to understand😄
thank you
Lol I am doing the same
Great video as always, very well explained.
Glad you liked it!
Thanks.
Hello friend - firstly thanks for your videos :D They are really great, u are doing very good work!
I have a question, in my OLED eMMC (NAND) has died, can i replace it with new blank one and restore my backup? Will picofly boot to hekate with blank nand? Thanks :)
You can restore it. Pico will boot with a blank nand.
Silly question: can we replace internal emmc with actual micro-SD? (not using EMUNAND, but hardware soldering, like Wii U nand aid)
And, can we use emmc to microsd for external storage?
no, we cannot
Hello, friend can solve soft bug: after tegra wipe on the ns lite version the battery is charged only to 4.2V, instead of 4.35 because of this 10% of the battery capacity is not used
Great video. Can you advise on this issue with a Switch Lite please? Same error code but is intermittent. Every 5-6 months the code comes up and when I reboot the system the HWFly mod chip won’t boot. Three separate occasions now I have reflowed the points and then the modchip boots and wifi works fine again for another few months.
Any ideas would be appreciated, have searched online but can’t find any answers.
the hwfly has nothing to do with the wifi chip, but you can try removing the chip connection and test the wifi. and finally try to replace the chip and see.
@@sthetixofficial Thank you for the quick reply. I thought the same too, have replaced the chip and it still happens from time to time. To be clear, everything works fine for months, then the error code randomly appears and seemingly is only fixed by reflowing the top four connections 🤷🏻♂️. When the error code comes up, the switch can not reboot.
try to replace the hwfly chip
Is it possible to get the network chip from china with the bluetooth working? And both BCM and CWY work on all models?
must be pulled from a nintendo switch console
I need to switch batteries on mine to see the error. But I think it's the one from leaving it not charged.
Because the chip lights up. But no other power.
Hi Sthetix!, this error can happen when you broke/take out the 2 capacitors near to the cpu shield that are connected to the wireless chip. This error happened to me but it was because of that.
I know that. but this console isn't modded 😁
Bravo
hello, even replacing the chip pulled from a donor board the error persist, have you seen this problem before?
the either the chip is damaged or your console has other problems. if your console is modded, you need to check the two caps on the side of the cpu or check the corresponding caps around the broadcom chip
@@sthetixofficial thanks, the chip i'm pretty sure is working fine, the caps You mentioned near cpu was damaged and replaced, but still, caps near chip are fine i think, but i will try Reball the cpu if nothing else works
Hello Sthetix. I have an issue with my switch. When I want to inject a payload it says "A fatal error occurred when running Fusee. Failed to open sdmc:atmosphere/package3!" Can you tell me what I must do please? Do you have any video?
why do u use fusee?
please use my pack, and use the launch menu
t.me/HATSPACK/6
@@sthetixofficial Noted! Thanks. Do you have any video tutorial for that pls?
Please download my pack, delete your existing atmosphere, bootloader and config folder inside your SD card. Boot your console. When you are in Hekate, press the Launch menu, and select the sysmmc
So this is not for the lite edition? Only for the regular and Oled versions?
why?
@@sthetixofficial i am asking. Is this for all models the same procedure?
it is for the lite too. they uses the same wifi chip
Please video guide for ps4 hen 11.
I like your explanation
I don't have a passion to jb a ps4 currently.
this error can happen when capacitor from the wifi direct cpu is missing or disconect
yes, but this console is not modded, so it is not the capacitor
Em đang bị vấn đề y như này
Hi sir i have oled switch but when i restart it take up to 30mins to restart :( can you help me out. thank you
Original switch :(
It is modded?
@@sthetixofficial no my switch have not been modded sir
it could mean the emmc chip or the cpu is damaged. try to bring it back to nintendo
My console detecte only bluetooth
try to reball it and see.
I hope I don't get this error