Glad I’m not the only one who struggled with this BS. Had to take a break and watch someone else struggle as much as I have for the last 2 hours. Thanks for cheering me up.
Ha, ha, ha! School of life Plumbing! I admire your tenacity Jason, great job! Its not whether you know how to do stuff, but getting back on your skis after falling repeatedly. I admire that. And the fact that you are secure enough to show these bloopers!
So glad to see a faucet install that is probably how mine will go. I've watched about 3 before this where they make it look so easy with no mishaps and everything works as it should. I laughed watching yours as I know that frustration all too well. Great job! I enjoyed watching your video that shows when every single turn is an obstacle to overcome. So now I know about the extenders if I have that problem.
Jason, I love your videos. It's nice to see that I'm not the only who sometimes has difficulties with these "minor" jobs! I should have made a video of my "make a simple linoleum pan" under my Newmar's kitchen sink (lay a sheet of linoleum, use 1/4 round and caulk on the edges with half round across the door way edge, all to protect the composition shelf "just in case we had a leak" as my wife said.) Figured it was a four hour project. Halfway into it, I realized that my arm plus a nail gun were not long enough to reach the back wall to nail the 1/4 round. It's a DEEP cabinet. Solved the problem with Liquid Nails and a couple of pieces of scrap 1x2s to slide the 1/4 round back and clamp it until it dried. The caulk on the back was the real headache, and took a day-and-a-half to finish. All together, the four hour project took 3 1/2 days to complete. They say a good mechanic doesn't cuss. I am NOT a good mechanic!
Loved this episode!!!! You were real. It is just how I do things. I usually have many trials and errors the first time through. You did GREAT! Please videoing all your future projects the same way. Step by step, it is how I learn best.
Thanks for posting this. I'm a RUclips taught full time RVer and I don't know what I would do without you all that share your experiences (good and bad)! I'm about to take on a leaky faucet myself and this will save me trips back to the hardware store hopefully. :)
You guys are SO awesome! I learn more from your "How NOT to ..." videos than I ever would from a more serious and staid "How to ... ." They're not only hilarious -- LOVE the cat! -- but a whole lotta learning happens. Thanks for the great sense of humor! : )
I have agree with most other comments, that this is exactly how things like this go for me the first time through as well. I would have made the same decisions along the way. I guess we "lay people" all think pretty much the same way. Really love watching and learning what (not) to do, and which projects I would not mind attempting. You do such a great job of filming and editing too! Thanks!
You guys are so cute, and I really enjoy watching your videos (very well done) ... we purchased our first "starter" RV in Aug '12 and have lots of DIY projects .. replacing both faucets (kitchen and bathroom) is next on the list .. your video was very helpful ... thanks!
It's like watching me fix stuff only funnier because i usually end up speaking a different language (if you know what i mean). The best part is that you do it and don't quite. Even when it's obviously a frustrating situation. Keep the videos coming. Love them.
You posted this 2 years ago, but we need it now. We recently bought an '02 Bounder Diesel and have plenty of improvement projects to tackle, including installing a composting toilet and adding solar power. This is why I'm in mourning for your impending sea-going, yet so glad you made all the great RV videos you did. And, Jason, I'm glad you posted the au naturale "How NOT to's" because they show the things that can go wrong for the rookie. When we start a project after watching a GWTW video, we say, "Oooo remember not to such-and-such like Jason did. (God love 'im.)" :-) Not really, but that's the idea. Jason does what we would ordinarily, innocently do ourselves. SAME THING when Nikki drove solo and had to unhook-hook-unhook-hook the dinghy to just maneuver the coach at a gas station. Showing us the mistakes that can be made or the crap you have to go through just to do the essentials is priceless intel.
Great job! It usually takes me three trips to the hardware store for a "quick" install. Most used item in my tool kit - the magnetic retrieval tool. You da man!
you're the Man. after years of minor plumbing jobs (replacing shower heads or attempting to fix a leak after the management company of my rent controlled apartment couldn't find it) I've learned to embrace the teflon tape
Man Card earned back Texas Style. Keep up the great videos we like it when Texan spread knowledge to the less fortunate cousins in the foreign countries that border Texas on the East, North, and West.
I felt as though I was watching a video in which you were playing the role of me. :-) Thanks for sharing, Jason. I am much better informed and educated because you recorded and shared your experience. Thank you!
I'm so glad you showed all your mistakes! I'm sitting in a building supply store trying to put in a new kitchen faucet that leaks bad. I bought a faucet tool and I learned from your mistakes. Thanks so much!
I basically went through the exact same process. I was also not recommended the faucet shank extender the first time, so there was even more angst. I watched this video again knowing you had the right part, and boom! New faucet finally installed, thank you for making this video!
This was fun and I actually had to laugh out loud. It looks like some of my projects. Everything takes three or four times longer than it should. Several times as you're working, I'm thinking "that's not going to work" then sure enough, a minute later you are saying "that didn't work". Kudo's to you for working through it, I enjoy all y'alls videos.
I give credit to anyone trying something new. It does not have to get done on the first try it just has to get done. Kudos Jason for sticking with it and conquering that leaky faucet connection. I am sure the "supervisor" was very appreciative of your efforts.
Glad to see I'm not the only one with multiple oops to get the job done! My bathroom faucet is leaking out the back on cold, I may have to attempt this myself, sooner (or later!)
Two "tools" - Teflon Tape and Basin Wrench. But, we've all been there. At least I know what to do if the wife decides we need to replace our faucets! Great "How to" and "What NOT to do". Keep up the good work!
Jason, I loved your install video! It shows your a real person just like all the rest of us- and that projects quite often take longer than you expect. I had to laugh at myself as I have had lots of similar experiences on RV projects- so many stories... I also enjoyed the help from "Singa the cat" as often when I am working on projects, its our cat Solomon that stays there with me to (perhaps encourage me) through the whole process. Thanks for the smiles! You made my day! Scott- Rapid City, South Dakota
This gave me a great deal of enjoyment while frustratingly failing at trying to fall asleep after an afternoon of building a roof mounted greenhouse for the coach and editing video for it. Won't say a word other than thanks for the smiles... Oh.... But did I catch Nikki saying "That's what she said" after Jason's commentary at the 5:40 mark? Hmmm...
I'm loving your sailing videos currently but saw this old video and just had to comment. This is exactly how every project i plan goes. I'm lucky if I get away with two trips to the hardware store. It happens so often that I know what to expect. I don't even get mad anymore, it's just part of the process of whatever project I'm working on. It was good to see a kindred spirit on the internet. I was rooting for you but alas...C'est la vie.
Lol..I soooo I needed to see this video!!! We're ( meaning my husband) is about to do this to our rv bathroom. 5 years later and believe me, this video is still relevant!! Thanks for making its..especially the part about the Shank Extenders!!!
I really admire your tenacity and the smile. I would have been beaten to death by my wife's tongue. Why not wait for the geeks to come by. It would have been a breeze for them and maybe cost a bottle of Sancerre? Actually, forget that. You stuck it out and conquered. You're the man Jason.
Jason, do you always start all your upgrade projects late in the day? It always seems to be dark before you finish! I applaud you for getting in there and just going for it. I also appreciate you posting your upgrades, warts and all.
Well, if you ever change another faucet, it should be a lot faster next time around. For one thing, a faucet wrench makes the job a whole lot easier. And sometimes the space is so limited that you have to use a faucet wrench because you can't get the channel locks (or your pliers) up in there. Good idea to always use Teflon tape, even with the pressure fittings. It only takes a minute more and can prevent future water damage. All the best!
OMG! Thank you for this. I was almost in tears (from frustration). Watched other videos where the dudes replaced the whole damn thing in like 5 minutes. Yeah, well....NOT me!!! I can't figure out why I now have a leak, just like yours! I had to come inside before I lost it!!! I never had a leak before! Ahhhhhhhhhhh!!! I am not giving up!!! p.s. I already tried the teflon tape, thinking it would do the trick, but nada!!! :(
Haha, man, I am glad I am not the only person this kind of thing happens to.At least your car didn't break down on the way to the hardware store. Thanks for posting.
Jason, good job. You tried, you learned and you succeeded. Most of these people won't even try. Best of all it cost you some time of which you have because of your lifestyle.
Man you did just fine other than the dude telling you not to use the tape. It's amazing how first time doing something like this is a battle but second time around you could do it in 30 minutes.
Jason is so secure in his masculinity that he's willing to use the blooper reel in the feature presentation. We're chickens and edit all that stuff out! Man Card intact Jason!
I love that you showed the whole thing w/ oops. It's what every do it yourself project takes to reach success, at least for us normal people. Smart fix for the low faucet too.
Ay Jason I feel your pain. I have to give you props though for trying to figure it out yourself. Was there a learning curve to it? Yes, but you learned through trial and error and now that knowledge is yours and will help you in the future. For a guy who is not a "handy man" I think you did great and you have my respect. Peace. :)
At first I thought maybe you messed up the plastic threads which is easy to do when securing to metal, especially in a tight space. Thanks for the vid, Jason. I'll be sure to check whether tape is needed before I start. Very helpful, you get your Man Card back!
They do make a special RV plumbing fastener wrench that does a much better job. Costs about $15 at most RV parts stores. It's double ended for both sizes commonly found in RVs. Does not tear up the fastener gripping points either! He had it easier than me since my rig is older than his and doesn't use the newer water connections. Kitchen sinks are much worse because the plumbing doesn't always run vertical but horizontal instead.
Hey man, don't beat yourself up. At least you only required 1 trip to the hardware store. I, over the years, have resolved that any plumbing job that requires less than 3 trips is a success. Besides, you got it done. Charge on, my friend, you can do it.
Generally what I've found is, those types of fitting only need to be hand tight. If you overtighten, you squeeze out the washer or distort it too much to seal.
Jason I hope eventually you changed those plastic extenders for brass. I can't see how the plastic extenders would have lasted much more than a few months. Either you replaced them for brass or whomever bought you RV did. Learned just how unreliable plastic is on a 'simple' plumbing upgrade job at home. When I finally learned my lesson and went to buy the brass extenders the associate at the plumbing section of Lowes told me never ever use plastic for plumbing, brass is best.
You must wrap the Teflon tape around in the same direction that the fitting tightens. I watched your cold side Teflon unroll and I’m surprised that it didn’t leak. I’m always surprised how the simple jobs can get so complicated by the time that you finish them. I’ve been there plenty of times myself! I can remember being up all night in high school adding accessories to my 1966 VW 1300 beetle. I didn’t have the correct tools 🛠 which wasted many hours of the night. You may ask why I didn’t wait for the weekend? Youthful impatience, that is it.
I agree with; cruyeda "Generally what I've found is, those types of fitting only need to be hand tight. If you overtighten, you squeeze out the washer or distort it too much to seal." Additionally, the PVC may crack over time with so much pressure on it being over-tightened.
Great job and always use pipe dope. Doesnt have to be tape, brush on thread dope is good. Your thread extender could have been cut a quarter inch to avoid the tight fit. The PEX hose has to flex, and when that tight it will fracture when coach is moving and bouncing on a road at Mono lake. PLEASE JASON take an ocean mechanical class before setting out on a boat to live. No tru value hardware out yonder!!!!! And Nikki the inverter Vid years ago.....your hair looks best there..but always beautiful!!!
Looking at the publish date, you're much older and more skilled. I'm a pretty good handyman, but have made all those same mistakes. Most likely I would have also broken something in the process, either on purpose or accidently. Hope you guys are still on the road.
This video is great. With how you left some of the oops in. Was that her Idea? (No matter) We've all been there and done that. Even mechanics whose payed to do it, paid by the hour. I bet if you had to do it all over again it would go faster. "You don't need Teflon tape", yeah right. Good job.
You did good bud and video was very helpful, gonna give you 2 tips tho. 1 you applied your pipe tape on wrong in the wrong direction on the cold water. You want to apply it in the same direction that you will be screwing the fitting on, otherwise it will unravel and cause a bad seal. 2 never, NEVER, listen to the ppl at the hardware store haha
In a similar fashion that one never does an involved electrical job (where pulling the meter is required, for example) on a Friday, starting a plumbing job at 4:25 p.m.? One must be "very brave" "very confident" or maybe a bit "naive". I'm reluctant to say what should be applied in this situation. Good on ya for sharing everything. I've never been one to document and share all the bone headed things I've done over the years. NOT TO SAY that anything you shared here is remotely similar. No no. I'm talking about my own boneheaded things. But hey, how are ya gonna learn, if you don't get a little wet? You did persevere, (sp?), and got the desired result. "No tape needed"? I almost fell for the one once. Only once. Oh, and after many plumbing jobs over the years, I did figure out why plumbers charge what they do. *It ain't easy*. And most times, it's freakin' dirty work. Once upon a time, I was even willing to PAY a plumber to do a job and he refused. He just said, "That's horse work", (had to do with breaking up some concrete) but he did write down all the fittings and sh*t I needed to do the job myself, so that was at least some consolation. Keep on truckin'! Cheers.
Always, ALWAYS use Teflon tape! Lol. Also I like the braided tubing with metal nuts instead of that plastic crap. More durable and easier to remove with tools.
When all else fails.................Read the instructions! :D Other than that......If I have a Spare five to six hours, I might attempt to replace my faucet. Don't worry Jason, you will redeem yourself. Great Video. :)
It's funny because it's exactly how I would have done it. Every step of the way. Except I would have made more trips to the hardware store. Thanks for the validation. Love your site and vids.
Jason those things seems to happen to us all and if the factory didnt know of that issue you didnt do that bad ,, not at all. I do all my own repairs on our RV and a finished job in one of these rigs is a successful job. Period. The first repair on my water heater took two days to figure out, now about 15 mins and its done. So that one hour is someone who has done this many times and zips through with the right pieces in hand also. so Card is Intact. :-)
around 40 MPG, so not amazing but pretty good. This is a funny read if you have a chance, i found a nice way to get better MPG on the RV: www.gonewiththewynns.com/vesta-fuel-economy
the faucet is from the Fleetwood Expedition, you can order from Fleetwood parts department, or I'm sure you can find a similar one at the hardware store.
Our RV faucet sucks too. I'm looking for a better one that sticks further out like your new one. Do you know which model or brand it was? Or where you ordered it. Most RV faucets I'm finding online are plastic made to look metal. Was yours metal or plastic? Nice video. Thanks
You're probably better off measuring the current faucet & then heading to your local Home Depot, Lowe's, etc. where you can compare & measure to see which one will fit best.
I'm so glad my wife does not watch your videos. All I need is video evidence of my lack of skills. I found myself talking to the screen trying to give some hindsight acquired advice as if it would help you. Love your videos. Your videos are helping me with upgrade ideas for my 1987 Fleetwood Southwind.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Glad I’m not the only one who struggled with this BS. Had to take a break and watch someone else struggle as much as I have for the last 2 hours. Thanks for cheering me up.
Ha, ha, ha! School of life Plumbing! I admire your tenacity Jason, great job! Its not whether you know how to do stuff, but getting back on your skis after falling repeatedly. I admire that. And the fact that you are secure enough to show these bloopers!
So glad to see a faucet install that is probably how mine will go. I've watched about 3 before this where they make it look so easy with no mishaps and everything works as it should. I laughed watching yours as I know that frustration all too well. Great job! I enjoyed watching your video that shows when every single turn is an obstacle to overcome. So now I know about the extenders if I have that problem.
Jason, I love your videos. It's nice to see that I'm not the only who sometimes has difficulties with these "minor" jobs! I should have made a video of my "make a simple linoleum pan" under my Newmar's kitchen sink (lay a sheet of linoleum, use 1/4 round and caulk on the edges with half round across the door way edge, all to protect the composition shelf "just in case we had a leak" as my wife said.) Figured it was a four hour project. Halfway into it, I realized that my arm plus a nail gun were not long enough to reach the back wall to nail the 1/4 round. It's a DEEP cabinet. Solved the problem with Liquid Nails and a couple of pieces of scrap 1x2s to slide the 1/4 round back and clamp it until it dried. The caulk on the back was the real headache, and took a day-and-a-half to finish. All together, the four hour project took 3 1/2 days to complete. They say a good mechanic doesn't cuss. I am NOT a good mechanic!
This is a great video, really shows the reality and headaches that often occurs when doing plumbing. I hope your new rig has the proper fixtures!
Loved this episode!!!! You were real. It is just how I do things. I usually have many trials and errors the first time through. You did GREAT! Please videoing all your future projects the same way. Step by step, it is how I learn best.
Thanks for posting this. I'm a RUclips taught full time RVer and I don't know what I would do without you all that share your experiences (good and bad)! I'm about to take on a leaky faucet myself and this will save me trips back to the hardware store hopefully. :)
You've got this!
You guys are SO awesome! I learn more from your "How NOT to ..." videos than I ever would from a more serious and staid "How to ... ." They're not only hilarious -- LOVE the cat! -- but a whole lotta learning happens. Thanks for the great sense of humor! : )
I have agree with most other comments, that this is exactly how things like this go for me the first time through as well. I would have made the same decisions along the way. I guess we "lay people" all think pretty much the same way. Really love watching and learning what (not) to do, and which projects I would not mind attempting. You do such a great job of filming and editing too! Thanks!
Way to make changing a faucet entertaining! Looking forward to future videos.
Jason you're the best at teaching patience. Love your videos!
You guys are so cute, and I really enjoy watching your videos (very well done) ... we purchased our first "starter" RV in Aug '12 and have lots of DIY projects .. replacing both faucets (kitchen and bathroom) is next on the list .. your video was very helpful ... thanks!
It's like watching me fix stuff only funnier because i usually end up speaking a different language (if you know what i mean). The best part is that you do it and don't quite. Even when it's obviously a frustrating situation. Keep the videos coming. Love them.
You posted this 2 years ago, but we need it now. We recently bought an '02 Bounder Diesel and have plenty of improvement projects to tackle, including installing a composting toilet and adding solar power. This is why I'm in mourning for your impending sea-going, yet so glad you made all the great RV videos you did. And, Jason, I'm glad you posted the au naturale "How NOT to's" because they show the things that can go wrong for the rookie. When we start a project after watching a GWTW video, we say, "Oooo remember not to such-and-such like Jason did. (God love 'im.)" :-) Not really, but that's the idea. Jason does what we would ordinarily, innocently do ourselves. SAME THING when Nikki drove solo and had to unhook-hook-unhook-hook the dinghy to just maneuver the coach at a gas station. Showing us the mistakes that can be made or the crap you have to go through just to do the essentials is priceless intel.
Great job! It usually takes me three trips to the hardware store for a "quick" install. Most used item in my tool kit - the magnetic retrieval tool. You da man!
This was actually very helpful! You made me feel like I could do this and not panic if, well when, the leaks occur :)
you're the Man. after years of minor plumbing jobs (replacing shower heads or attempting to fix a leak after the management company of my rent controlled apartment couldn't find it) I've learned to embrace the teflon tape
Man Card earned back Texas Style. Keep up the great videos we like it when Texan spread knowledge to the less fortunate cousins in the foreign countries that border Texas on the East, North, and West.
I felt as though I was watching a video in which you were playing the role of me. :-) Thanks for sharing, Jason. I am much better informed and educated because you recorded and shared your experience. Thank you!
I'm so glad you showed all your mistakes! I'm sitting in a building supply store trying to put in a new kitchen faucet that leaks bad. I bought a faucet tool and I learned from your mistakes. Thanks so much!
Jason - thanks for being brave enough to show us your mistakes as well as successes.
I basically went through the exact same process. I was also not recommended the faucet shank extender the first time, so there was even more angst. I watched this video again knowing you had the right part, and boom! New faucet finally installed, thank you for making this video!
So glad our pain can be your gain! Good job finishing the project!
This was fun and I actually had to laugh out loud. It looks like some of my projects. Everything takes three or four times longer than it should. Several times as you're working, I'm thinking "that's not going to work" then sure enough, a minute later you are saying "that didn't work". Kudo's to you for working through it,
I enjoy all y'alls videos.
I knew when you guys put the time in the video when Jason started that it was gonna go how it did. LOL. Great video guys!
I laughed so much I began coughing uncontrollably. Thats the kind of hell I go thru trying to fix things sometimes. glad it was you and not me
Absolutely how I do things....great job! I was so excited for you to get it done.
I give credit to anyone trying something new. It does not have to get done on the first try it just has to get done. Kudos Jason for sticking with it and conquering that leaky faucet connection. I am sure the "supervisor" was very appreciative of your efforts.
This was hilarious to watch, mainly because we'v been there, done that. Love that you can show the oops with the successes.
Too funny! Been there and done that...I just didn't get it on video. Kudos to you Jason for sharing.
Glad to see I'm not the only one with multiple oops to get the job done! My bathroom faucet is leaking out the back on cold, I may have to attempt this myself, sooner (or later!)
Two "tools" - Teflon Tape and Basin Wrench.
But, we've all been there. At least I know what to do if the wife decides we need to replace our faucets! Great "How to" and "What NOT to do".
Keep up the good work!
Jason,
I loved your install video! It shows your a real person just like all the rest of us- and that projects quite often take longer than you expect. I had to laugh at myself as I have had lots of similar experiences on RV projects- so many stories... I also enjoyed the help from "Singa the cat" as often when I am working on projects, its our cat Solomon that stays there with me to (perhaps encourage me) through the whole process.
Thanks for the smiles! You made my day!
Scott- Rapid City, South Dakota
This gave me a great deal of enjoyment while frustratingly failing at trying to fall asleep after an afternoon of building a roof mounted greenhouse for the coach and editing video for it. Won't say a word other than thanks for the smiles...
Oh.... But did I catch Nikki saying "That's what she said" after Jason's commentary at the 5:40 mark? Hmmm...
by far the most entertaining video yet. you guys are amazing entertainers.
I'm loving your sailing videos currently but saw this old video and just had to comment. This is exactly how every project i plan goes. I'm lucky if I get away with two trips to the hardware store. It happens so often that I know what to expect. I don't even get mad anymore, it's just part of the process of whatever project I'm working on. It was good to see a kindred spirit on the internet. I was rooting for you but alas...C'est la vie.
+blacktie0426 Story of my life man. So sad.
Lol..I soooo I needed to see this video!!! We're ( meaning my husband) is about to do this to our rv bathroom. 5 years later and believe me, this video is still relevant!! Thanks for making its..especially the part about the Shank Extenders!!!
Thanks for letting us know because that's why we make these - glad it's helped!
I'm impressed. I would have cried and quit. You are awesome!
Good job! Always use Teflon tape, and get the Channel Lock pliers out before beginning!
That's the most beautiful kitty I have ever seen!
The guy stepped up and did what needed. Big points there! The ace guy, deduct points for bad information to a rookie.
I really admire your tenacity and the smile. I would have been beaten to death by my wife's tongue. Why not wait for the geeks to come by. It would have been a breeze for them and maybe cost a bottle of Sancerre? Actually, forget that. You stuck it out and conquered. You're the man Jason.
Jason, do you always start all your upgrade projects late in the day? It always seems to be dark before you finish! I applaud you for getting in there and just going for it. I also appreciate you posting your upgrades, warts and all.
Well, if you ever change another faucet, it should be a lot faster next time around. For one thing, a faucet wrench makes the job a whole lot easier. And sometimes the space is so limited that you have to use a faucet wrench because you can't get the channel locks (or your pliers) up in there. Good idea to always use Teflon tape, even with the pressure fittings. It only takes a minute more and can prevent future water damage. All the best!
Lol 😂 Thank you for the good laugh. As a newbie in a class C Rv. This is something good to know before starting to install a new bathroom faucet.
OMG! Thank you for this. I was almost in tears (from frustration). Watched other videos where the dudes replaced the whole damn thing in like 5 minutes. Yeah, well....NOT me!!! I can't figure out why I now have a leak, just like yours! I had to come inside before I lost it!!! I never had a leak before! Ahhhhhhhhhhh!!! I am not giving up!!! p.s. I already tried the teflon tape, thinking it would do the trick, but nada!!! :(
Haha, man, I am glad I am not the only person this kind of thing happens to.At least your car didn't break down on the way to the hardware store. Thanks for posting.
Jason, good job. You tried, you learned and you succeeded. Most of these people won't even try. Best of all it cost you some time of which you have because of your lifestyle.
Man you did just fine other than the dude telling you not to use the tape. It's amazing how first time doing something like this is a battle but second time around you could do it in 30 minutes.
Good job! I laughed and sighed along with you. I've done so many projects that go that way.
Jason is so secure in his masculinity that he's willing to use the blooper reel in the feature presentation. We're chickens and edit all that stuff out! Man Card intact Jason!
I was just watching one of your how to's and thinking to myself...these guys never mess up!
Gone with the Wynns EX-cellent! Our illusion is complete! ;-)
don't panic I have a pipe stretcher in my pick up truck ,com'on i'm your plumber friend :0-
This is great...im getting ready to change out my diesel pushers bath room sink as well.
I love that you showed the whole thing w/ oops. It's what every do it yourself project takes to reach success, at least for us normal people. Smart fix for the low faucet too.
More "How NOT to" videos please. I'm enjoying the heck out of them. (sowwy)
Ay Jason I feel your pain. I have to give you props though for trying to figure it out yourself. Was there a learning curve to it? Yes, but you learned through trial and error and now that knowledge is yours and will help you in the future. For a guy who is not a "handy man" I think you did great and you have my respect. Peace. :)
Always fun to watch you guys
MAN card received! You've already got the balls, skills can always be acquired. Every OLD PRO had a first time!
At first I thought maybe you messed up the plastic threads which is easy to do when securing to metal, especially in a tight space. Thanks for the vid, Jason. I'll be sure to check whether tape is needed before I start. Very helpful, you get your Man Card back!
Dude, you crack me up with the instillation... really funny!
Been there, done that with same problems. That's way some of us have gray hair. Glad you got it to work without leaking.
They do make a special RV plumbing fastener wrench that does a much better job. Costs about $15 at most RV parts stores. It's double ended for both sizes commonly found in RVs. Does not tear up the fastener gripping points either! He had it easier than me since my rig is older than his and doesn't use the newer water connections. Kitchen sinks are much worse because the plumbing doesn't always run vertical but horizontal instead.
OMG, that cat is beautiful. I wish you showed more of him.
Hey man, don't beat yourself up. At least you only required 1 trip to the hardware store. I, over the years, have resolved that any plumbing job that requires less than 3 trips is a success. Besides, you got it done. Charge on, my friend, you can do it.
Generally what I've found is, those types of fitting only need to be hand tight. If you overtighten, you squeeze out the washer or distort it too much to seal.
Jason I hope eventually you changed those plastic extenders for brass. I can't see how the plastic extenders would have lasted much more than a few months.
Either you replaced them for brass or whomever bought you RV did. Learned just how unreliable plastic is on a 'simple' plumbing upgrade job at home. When I finally learned my lesson and went to buy the brass extenders the associate at the plumbing section of Lowes told me never ever use plastic for plumbing, brass is best.
Most of my "easy" projects end up being hard, and the hard jobs not so bad. Glad I am not the only one that it takes 5 times longer than it should.
You must wrap the Teflon tape around in the same direction that the fitting tightens. I watched your cold side Teflon unroll and I’m surprised that it didn’t leak. I’m always surprised how the simple jobs can get so complicated by the time that you finish them. I’ve been there plenty of times myself! I can remember being up all night in high school adding accessories to my 1966 VW 1300 beetle. I didn’t have the correct tools 🛠 which wasted many hours of the night. You may ask why I didn’t wait for the weekend? Youthful impatience, that is it.
Who needs meme compilations when there's stuff like this on RUclips..I haven't laughed this much in so long.
Nikkii: thanks for the video, it will save Me lots of time doing My renos.
Jason: *hangs head in shame*
Still a big fan!
I agree with; cruyeda
"Generally what I've found is, those types of fitting only need to be hand tight. If you overtighten, you squeeze out the washer or distort it too much to seal."
Additionally, the PVC may crack over time with so much pressure on it being over-tightened.
We're heading into Austin, TX this week and I was considering getting a replacement...probably not a bad idea.
Great job and always use pipe dope. Doesnt have to be tape, brush on thread dope is good. Your thread extender could have been cut a quarter inch to avoid the tight fit. The PEX hose has to flex, and when that tight it will fracture when coach is moving and bouncing on a road at Mono lake. PLEASE JASON take an ocean mechanical class before setting out on a boat to live. No tru value hardware out yonder!!!!! And Nikki the inverter Vid years ago.....your hair looks best there..but always beautiful!!!
Looking at the publish date, you're much older and more skilled. I'm a pretty good handyman, but have made all those same mistakes. Most likely I would have also broken something in the process, either on purpose or accidently. Hope you guys are still on the road.
We have all been there with projects. Good for you.
Great video. I thought you ALWAYS used tape on any water tight connections.
that's what i thought too, but the ACE guy insisted. Shoulda read the directions before installing.
Gone with the Wynns remember always read the directions first.
You put the Teflon tape on backwards on the cold water line. The tape needs to go in the same direction as the threads. Lucky it worked anyway.
Question:
I've noticed how tall your toilet seat is and was wondering, do your feet dangle when you're doing the bizniz?
video to come soon...and yes the feet dangle unless we have our little step stool up.
Good Job!!! ...............Well done mate !!!
This video is great. With how you left some of the oops in. Was that her Idea? (No matter) We've all been there and done that. Even mechanics whose payed to do it, paid by the hour. I bet if you had to do it all over again it would go faster. "You don't need Teflon tape", yeah right. Good job.
The mangled pipe where the wrench attaches is something I've seen way too often from my DIY projects!
+StriderGTS Glad I'm not the only one!
You did good bud and video was very helpful, gonna give you 2 tips tho. 1 you applied your pipe tape on wrong in the wrong direction on the cold water. You want to apply it in the same direction that you will be screwing the fitting on, otherwise it will unravel and cause a bad seal. 2 never, NEVER, listen to the ppl at the hardware store haha
I am so glad you made this video
Thanks!! After watching, I'll just leave the stock faucet on!!!
Hey some projects just go that way. Good thing you had someone to keep count of mistakes lol
In a similar fashion that one never does an involved electrical job (where pulling the meter is required, for example) on a Friday, starting a plumbing job at 4:25 p.m.?
One must be "very brave" "very confident" or maybe a bit "naive". I'm reluctant to say what should be applied in this situation.
Good on ya for sharing everything. I've never been one to document and share all the bone headed things I've done over the years. NOT TO SAY that anything you shared here is remotely similar. No no. I'm talking about my own boneheaded things.
But hey, how are ya gonna learn, if you don't get a little wet?
You did persevere, (sp?), and got the desired result.
"No tape needed"? I almost fell for the one once. Only once.
Oh, and after many plumbing jobs over the years, I did figure out why plumbers charge what they do. *It ain't easy*. And most times, it's freakin' dirty work.
Once upon a time, I was even willing to PAY a plumber to do a job and he refused. He just said, "That's horse work", (had to do with breaking up some concrete) but he did write down all the fittings and sh*t I needed to do the job myself, so that was at least some consolation.
Keep on truckin'!
Cheers.
Great camera work .I like the drip cam under the sink.
Do you play the music as you are recording ?
Always, ALWAYS use Teflon tape! Lol. Also I like the braided tubing with metal nuts instead of that plastic crap. More durable and easier to remove with tools.
+Jerome Truitt Also he wrapped the tape backwards. Teflon tape should be wrapped in the same direction you would thread a nut on.
When all else fails.................Read the instructions! :D Other than that......If I have a Spare five to six hours, I might attempt to replace my faucet. Don't worry Jason, you will redeem yourself. Great Video. :)
dang instructions!?!
I thought this only happened to me.....ahhh, validation!
It's funny because it's exactly how I would have done it. Every step of the way. Except I would have made more trips to the hardware store. Thanks for the validation. Love your site and vids.
You put the teflon tape on backwards also. Its suppose to go on clockwise so it doesn't unwrap off pipe when you screw on adapter.
That's exactly how it goes, lol. Thanks for showing us reality...always good to know it's not just me that this happens to
+PerSueTheDream and always read the directions!
Jason those things seems to happen to us all and if the factory didnt know of that issue you didnt do that bad ,, not at all. I do all my own repairs on our RV and a finished job in one of these rigs is a successful job. Period. The first repair on my water heater took two days to figure out, now about 15 mins and its done. So that one hour is someone who has done this many times and zips through with the right pieces in hand also. so Card is Intact. :-)
Awesome video. Thanks for sharing!
Nikki is still letting you fix things? :) That is true love, Jason!
Cool video sounds like me when I do repairs. Did you tape a mobile phone to the cabinet for your inside cabinet video?
Note to self when buying used rv check faucet and other connections redo pex pipe and connections as necessary.. lol
youve probably answered this a million times already, but whats your real world mpg on that smart car?
around 40 MPG, so not amazing but pretty good. This is a funny read if you have a chance, i found a nice way to get better MPG on the RV: www.gonewiththewynns.com/vesta-fuel-economy
Instructions.....me too though. Glad you got it done in the end.
I like the faucet and would like to put one in my RV also. Where did you find this one? Also, I enjoy your posts.
the faucet is from the Fleetwood Expedition, you can order from Fleetwood parts department, or I'm sure you can find a similar one at the hardware store.
Oh My that was painful to watch. But glad that you were finally successful !
Our RV faucet sucks too. I'm looking for a better one that sticks further out like your new one. Do you know which model or brand it was? Or where you ordered it. Most RV faucets I'm finding online are plastic made to look metal. Was yours metal or plastic? Nice video. Thanks
You're probably better off measuring the current faucet & then heading to your local Home Depot, Lowe's, etc. where you can compare & measure to see which one will fit best.
love it I had made these mistakes numerous time.
The cat said "I've got it dad, let me!" ;)
I'm so glad my wife does not watch your videos. All I need is video evidence of my lack of skills. I found myself talking to the screen trying to give some hindsight acquired advice as if it would help you. Love your videos. Your videos are helping me with upgrade ideas for my 1987 Fleetwood Southwind.