Just got these drivers and let's see where to start here. First: I've started with cheap dynamite drivers starting out on a tight budget years ago. Not bad for cheap beginner drivers but the tips did wear out and when I switched to stainless and titanium hardware they were a little lose in the screw heads leading to some stripped screw heads. Second: I went to MIP drivers. Good tips but they have normal screwdriver handles which are hard on the palms when wrenching but MIP tips fit better into stainless.and titanium heads. A step up. But for the price MIP quite high, the drivers are glorified screwdrivers with nice tips that cost a bundle but served me well. Then enter the protek true torque drivers so so so freaking nice to use the handles are gorgeous and comfortable and just mad nice. The tips fit very snugly into stainless and titanium heads and are actual precision ground tips and when they wear out they can be easily replaced. I have only been wrenching with them for about a week now but they are super nice to use in all respects.and for about 50 bucks a heck of a bargain if you ask me. Main points, excellent handles and precision ground tips that fit snug in stainless and titanium heads which are known for being a little lose compared to steel hardware. I am 💯 percent happy with them. They came.in a nice foam lined plastic case so no real need for a bag for them yet either!
The video explanation is very good. Not long ago, I bought a set of this renhotecic brand tool set, and just watched this video to learn how to use it. It is recommended that friends who like to repair by themselves can prepare a set.
I really love these tools probably going to get a full set of these. I really enjoy the bang for your buck that they have in their tools. Not too expensive and really nice quality.
How you made this video with a straight face is beyond me, the innuendo is on full display here. I know I'm asking for this Valentines Day tho. A SL.... driver.
What I'm certain a LOT of people would like to see is a comparison of these against MIP...a TRUE in-depth comparison - tensile strength of the shafts, of the hexes, and so forth. While some people care about the weight, 99.9% of those using these types of tools care more about the strength, whether (or not) the heads will strip, the longevity of the tools, etc. I'm certain that AMain won't be the one to do it, as ProTek is their own brand, so, what's needed is for an "independent" to step up to do the comparison. The great majority of hobbyists believe that MIP tools are the best...and, they very well might be (I've got a fairly decent collection of them)...but, for all we know, the ProTek tools could prove equally good. While they could be (slightly) worse, they could also prove (slightly) better. The ONLY way to know, for certain, is for a side-by-side comparison to be done.
This is a case for MythBusters. No, I kid. This video is meant to be funny and serious. I wouldn't say these tools are better than MIP. I would claim the best tool in the world is in the one available at the moment you need it. Regardless, these tools are Super Sexy! #SL -Brett
@@AMain_Hobbies Thanks for your reply. Truthfully, I'd still like to see a comparison. While they're (probably) not as good as MIP, if they're close enough, it would show people that AMain-branded products can be not only "almost as good", but also better than other items made by other competitors. If customers can see that your lower-priced (compared to MIP) offerings are better than tools made by Traxxas, Losi (and other Horizon Hobby brands), etc, then that would help sell people on the AMain-branded items. Looking at it from another perspective, AMain has outstanding customer service (part of why I go to AMain for anything I can't get from my LHS...and, sometimes, even when I can get it from the LHS). If AMain can show customers that the quality of its own products holds up to the quality of the customer service, that would help AMain increase sales of AMain-branded products (ie. such videos wouldn't be to show AMain-branded products being "better" than competitor's products, but more of being "almost as good, but at a lower price". While some care only about quality, and others care only about the lowest price, the largest segment of consumers tend to care about both, and consider both in their purchases. EDIT:. Ok, this is funny. No sooner had I posted this comment (before adding this edit), Mark Santa Maria just posted a comparison video. I haven't watched it (will do so after finishing this exit), but I do find the timing "interesting"...and, again, funny.
For the price though the protek drivers are almost unbeatable, I've had quite a few brands, the proteks and MIPs are the only brands I trust when working on my Losis and Arrmas which are notorious for their low quality screws
@@robbryan3044 Ah nice, I don't have any of their race kits other than the 5ive B, but losi's RTR screws are terrible, luckily the 5ive B's screws are muuuch better quality
I have these tools, the hex metric set and the ball drivers. The hex tips fit the hexes of the screws very well, and so far so good. One thing they should look into doing is slotting the hex tips along more of the length of the shaft, similar to how Tekno Hex drivers are as you can then lengthen and shorten the effective length of the shaft since it just slides into the handle. This is a feature I really like on the Tekno tools, especially when teaching kids to use these tools the length of the tips can make turning then without wobble a bit harder. I plan to have a friend of mine slot mind similar to the Teknos and will see how it goes.
I don't have a lot of wrench time on the new SL's, but I will put these up against my MIPs any day of the week. The tip measurements on my MIP and SLs with HSS tips are not measurable with my calipers at home. Yes I've had the MIPs longer, so there could be SOME wear, but we all know MIP has built a great tool for a while - I doubt the tip has worn. I've retired my MIPs for now, and I don't see myself digging them out again in the future.
These look like nice tools! I don’t mind paying good money for quality tools as I recently purchased the Arrowmax 23pc Black & Gold honeycomb from amain. Actually got the last set in stock! Must say I absolutely LOVE them and the fact it’s a set is perfect!I have every tool I need all in one case and didn’t have to try piecing a kit together. It would be really nice to see Protek offer a nice set like Arrowmax. Maybe offer a 13pc, 16 or even a 23-25pc set with a nice carrying case. Just my two cents.
I don’t know man, I guess it’s because I haven’t used them ever, but I can say my MIP set is going on 5 years now. I drive arrma’s and traxxases so I’m always working on them.
I have had these dirt cheap dynamite wrenches for 11 years now. The red machined handles that cost 8each or the various 3 sets for 19.99. Keep spending 4 times more than you need too!
Very, very nice ProTek! MIP drivers are ugly and heavy. I personally appreciate the effort to lighten up the RC tool bag. The colored collars were great idea for easy identification. Another idea would be colored caps on the end of the handles.
@@AMain_Hobbies maybe we can all just agree to disagree guys. The amount of broken tools speaks for itself. I haven't broken a single MIP tool in six years of wrenching.
LOOL... This is my favourite video so far. Brett had me Seriously Laughing... haha #SL. Sick tool set and review though, i'll definitely be considering them
Let’s see an Amain in house RC kit. As Horizon buys up everything I like shopping from Amain more and more. Please make an in house kit. Crawler, racer, SCT, Monster truck I don’t care. Anything, I will buy it and love it.
I've been an MIP guy for a while I'm looking for a different speed tip I think their quality has gone downhill. My first set of mip has lasted a long time. I've had three 2.0 though. My last one only lasted a couple months. I think I'm going to give these to try next. As always great video keep up the good work bro
Yes they do. What tools are you looking for? This is the Metric Hex Driver Set: www.amainhobbies.com/protek-rc-trutorque-sl-metric-hex-driver-set-4-ptk-8416/p863873 And the Metric Nut Driver Set: www.amainhobbies.com/protek-rc-trutorque-sl-4piece-metric-nut-driver-set-5.0-5.5-7.0-8.0mm-ptk-8282/p752699 The SAE Standard Set is available too. Let me know if you need that. -Brett
@@AMain_Hobbies I was trying to ask if the entire "TruTorque SL" set of tools (sae, metric. nut drivers , ball hex drivers etc..) came as a package. I didn't ask my question very well.😐 I've now looked fairly deep, I believe the answer is no. Thank you for your time sir. Keep up the good work.
It refers to the tip of the tool bit, that will mate with the screw. A normal hex is straight and is designed for the driver to work in-line with the screw. A ball end is not straight, but is ball shaped on the tip, allowing the driver to work at an angle with the screw - much better for hard to reach spots. Downside - ball tips are not as strong as normal, straight hex. Here is a great resource for more information: toolguyd.com/ball-hex-vs-straight-hex-tools/ -Brett
Hey Michael. The 4-Piece sets include a plastic storage box, with locks, and interior foam. The Tool Pouch shown in the video is sold separately. -Brett
Nice set I wish they made em in a 1/4" hex bit adapter. I'm over using hand tools like that I use my mini drill with super low settings wont even over tighten the cheapest plastic out there. Lol...with that said i had to go with the team associated set since price was rite and it had 1/4" drill adapter..but that new protek set are really nice for sure!
Here you go my friend: www.amainhobbies.com/protek-rc-trutorque-metric-power-drill-bit-tip-set-4-1.5-2.0-2.5-3.0mm-ptk-8243/p222022?r=0 All the glory without the war. -Brett
Input from anyone would be Greatly Appreciated on my questions, So what all Protek drivers would I need for working on anything Traxxas and maybe eventually an RC boat of whatever make/model? I’m gonna be buying a new Xmaxx and possibly Stampede 4x4 or 4x4 vxl. I’m definitely wanting the hex, flat heads, maybe star heads if available or needed, but drivers etc. I’m thinking of the new Traxxas $30 ratchet kit with the different hex and different drivers etc. I really need to know Asap so I can get some tools ordered. Thanks
Yeah, good question. I would start with the 4-Piece Hex Set; that will service the hex screws on all those Traxxas vehicles. Here it is: www.amainhobbies.com/protek-rc-trutorque-sl-metric-hex-driver-set-4-ptk-8416/p863873 Here is a phillips: www.amainhobbies.com/protek-rc-trutorque-sl-philips-screwdriver-4mm-ptk-8432/p942450 And a flat head: www.amainhobbies.com/protek-rc-trutorque-sl-flat-blade-screwdriver-4mm-ptk-8429/p942445 But you primarily need the hex set, which includes the 1.5, 2.0 and 2.5mm hex drivers. Those will be your go-to tools on R/C for 90% of wrenching. Then it's just odds and ends as the need comes up. I hope this helps. Shoot over any other questions you have. -Brett
Hmm, that i'm not sure of. The caps are secured with clip rings from the inside, if they aren't spinning that clip may not be seated correctly? Maybe they're defective? You could try contacting our CS team to see if you can get some new units. Is this issue with all the caps, or just a one/two? -Brett
@@AMain_Hobbies I personally would love to see a comparsion from a pro, i'm using them for years outside of the RC Hobby. And i personally think they are better, but yeah i'm a IT guy i'm not really a benchmark for this :).
Quick question maybe a little loaded but here it gos. I’m getting ready to order 1/5 scale short track truck. What are the basic tools i should have right from the start. Thx
Probably all the normal hex sizes like 1.5, 2.0, 2.5 and 3mm, plus some other larger sizes. Pliers, nut drivers, wheel nut wrench and a car stand are great to have. What vehicle is it and we can look in the manual to see what they recommend for tools? -Brett
@@christopherbuchanan2570 Do you mean the 5IVE-T 2.0? There are some tools included with the 5IVE-T, such as: -Wheel Wrench -Rod end/shock end tool -Multi wrench -2.0mm, 2.5mm, 3.0mm, 4.0mm allen wrenches -Spark Plug Wrench Upgrading these tools down the road is a good idea, especially the allen wrenches. That should cover you for most things, and then you may need to buy different tools when the need comes up. Hope that helps. -Brett
It depends on the products and if the manufacturer has any International shipping limitations. For some items you may want to stick with eBay, others products, like ProTek R/C, you can buy direct at AMainHobbies.com. -Brett
With a straight Hex, the driver must be perfectly straight with the screw. With a ball, the driver can be at an angle for hard to reach places. Really handy for some situation. I keep a ball 2mm and ball 2.5mm; they are used rarely, but they're a life saver when you need them. The downside to a ball driver is that they are not as strong as a standard straight hex. -Brett
Anyone have experience on this brand? How's the tip? Thats my main concern...my former hex keep loosing their tip shape though they are double cheaper than this. Maybe its time to invest on real tools;) any info gladly appreciated..
They are amazing, minus 1 point for not being SL tools. No, I'm kidding. Just about everything Mugen makes is world class. You can't go wrong with anything they make; especially their 1/8 competition vehicles. -Brett
So you're saying, size does matter? Who was that guy you were talking to without a hat? I hate having to say this, but the colored collars should be included. You still do some good presentations, even when the goof is not out.
He's just some guy trying to steal my job. Wish we had thought of those colored collars but Exotek offers those, so that's there thing. I agree though, being a fan of colors. -Brett
Don't take this wrong but I'm surprised and delighted that you actually take the time to reply to my comments. Most people in your place blow us peons off. Thank you for this.👌👍👍
Wonder why amain won't review the superior arrowmax set, even lighter than protek, with even better more durable materials. I guess it's cause protek offered more cash for this biased review. :/
many many companies make Hex bits from hardend drill blanks... but guess what... they are still expensive. the tooling to make those tools are expensive and precise.
contenplating buying a set of decent tools to last me a lifetime. ill rather buy once and skip the cheap tools 10 times. MIP's are half the price of these..do i rather get these because they look nice and are tough? or Arrowmax honeycomb black and gold? hmmm or do i get the MIP that looks like walmart tools but are the best...apparently?
Sorry but anything with a soft aluminum handle where the grub screw secures the tip just doesn't cut it, it's only a matter of time before the screw pings across the room stripping the threads and ruining your day.... MIP FTW!!!
dynamite pcs hex driver set..$19.99....dynamite 4pc metric driver set ..$29.99.....total $50....his set above?.....do the math...i got a set with no complaints
I've bought a whole set of these thanks to this review.
Just got these drivers and let's see where to start here.
First: I've started with cheap dynamite drivers starting out on a tight budget years ago. Not bad for cheap beginner drivers but the tips did wear out and when I switched to stainless and titanium hardware they were a little lose in the screw heads leading to some stripped screw heads.
Second: I went to MIP drivers. Good tips but they have normal screwdriver handles which are hard on the palms when wrenching but MIP tips fit better into stainless.and titanium heads. A step up. But for the price MIP quite high, the drivers are glorified screwdrivers with nice tips that cost a bundle but served me well.
Then enter the protek true torque drivers so so so freaking nice to use the handles are gorgeous and comfortable and just mad nice. The tips fit very snugly into stainless and titanium heads and are actual precision ground tips and when they wear out they can be easily replaced. I have only been wrenching with them for about a week now but they are super nice to use in all respects.and for about 50 bucks a heck of a bargain if you ask me. Main points, excellent handles and precision ground tips that fit snug in stainless and titanium heads which are known for being a little lose compared to steel hardware. I am 💯 percent happy with them. They came.in a nice foam lined plastic case so no real need for a bag for them yet either!
The video explanation is very good. Not long ago, I bought a set of this renhotecic brand tool set, and just watched this video to learn how to use it. It is recommended that friends who like to repair by themselves can prepare a set.
I really love these tools probably going to get a full set of these. I really enjoy the bang for your buck that they have in their tools. Not too expensive and really nice quality.
How you made this video with a straight face is beyond me, the innuendo is on full display here. I know I'm asking for this Valentines Day tho. A SL.... driver.
I know it, I had to make the comment, I couldn’t stop myself! 😂😂😂😂
What I'm certain a LOT of people would like to see is a comparison of these against MIP...a TRUE in-depth comparison - tensile strength of the shafts, of the hexes, and so forth. While some people care about the weight, 99.9% of those using these types of tools care more about the strength, whether (or not) the heads will strip, the longevity of the tools, etc.
I'm certain that AMain won't be the one to do it, as ProTek is their own brand, so, what's needed is for an "independent" to step up to do the comparison. The great majority of hobbyists believe that MIP tools are the best...and, they very well might be (I've got a fairly decent collection of them)...but, for all we know, the ProTek tools could prove equally good. While they could be (slightly) worse, they could also prove (slightly) better. The ONLY way to know, for certain, is for a side-by-side comparison to be done.
This is a case for MythBusters. No, I kid. This video is meant to be funny and serious. I wouldn't say these tools are better than MIP. I would claim the best tool in the world is in the one available at the moment you need it. Regardless, these tools are Super Sexy! #SL
-Brett
@@AMain_Hobbies Thanks for your reply. Truthfully, I'd still like to see a comparison. While they're (probably) not as good as MIP, if they're close enough, it would show people that AMain-branded products can be not only "almost as good", but also better than other items made by other competitors. If customers can see that your lower-priced (compared to MIP) offerings are better than tools made by Traxxas, Losi (and other Horizon Hobby brands), etc, then that would help sell people on the AMain-branded items.
Looking at it from another perspective, AMain has outstanding customer service (part of why I go to AMain for anything I can't get from my LHS...and, sometimes, even when I can get it from the LHS). If AMain can show customers that the quality of its own products holds up to the quality of the customer service, that would help AMain increase sales of AMain-branded products (ie. such videos wouldn't be to show AMain-branded products being "better" than competitor's products, but more of being "almost as good, but at a lower price". While some care only about quality, and others care only about the lowest price, the largest segment of consumers tend to care about both, and consider both in their purchases.
EDIT:. Ok, this is funny. No sooner had I posted this comment (before adding this edit), Mark Santa Maria just posted a comparison video. I haven't watched it (will do so after finishing this exit), but I do find the timing "interesting"...and, again, funny.
For the price though the protek drivers are almost unbeatable, I've had quite a few brands, the proteks and MIPs are the only brands I trust when working on my Losis and Arrmas which are notorious for their low quality screws
@@crazycamkalani Right now, I have 3 Traxxas, 2 TLR, and 1 XRAY. Regarding both TLRs, I replaced all kit screws & turnbuckles with titanium.
@@robbryan3044 Ah nice, I don't have any of their race kits other than the 5ive B, but losi's RTR screws are terrible, luckily the 5ive B's screws are muuuch better quality
Thanks a ton Brett, your excellent feature review of the new and improved drivers gave me the motivation to purchase metric, sae, and nut.
Thanks Howard. Having some good drivers is a real saver for the hands.
-Brett
I never expected it, but this video about hex tools was awesome! Thanks!
I have these tools, the hex metric set and the ball drivers. The hex tips fit the hexes of the screws very well, and so far so good. One thing they should look into doing is slotting the hex tips along more of the length of the shaft, similar to how Tekno Hex drivers are as you can then lengthen and shorten the effective length of the shaft since it just slides into the handle. This is a feature I really like on the Tekno tools, especially when teaching kids to use these tools the length of the tips can make turning then without wobble a bit harder. I plan to have a friend of mine slot mind similar to the Teknos and will see how it goes.
Brilliant video 👍😃
I don't have a lot of wrench time on the new SL's, but I will put these up against my MIPs any day of the week. The tip measurements on my MIP and SLs with HSS tips are not measurable with my calipers at home. Yes I've had the MIPs longer, so there could be SOME wear, but we all know MIP has built a great tool for a while - I doubt the tip has worn. I've retired my MIPs for now, and I don't see myself digging them out again in the future.
These look like nice tools! I don’t mind paying good money for quality tools as I recently purchased the Arrowmax 23pc Black & Gold honeycomb from amain. Actually got the last set in stock! Must say I absolutely LOVE them and the fact it’s a set is perfect!I have every tool I need all in one case and didn’t have to try piecing a kit together. It would be really nice to see Protek offer a nice set like Arrowmax. Maybe offer a 13pc, 16 or even a 23-25pc set with a nice carrying case. Just my two cents.
Gonna check these out. Just got back into the hobby with a slash vxl. 👍
Brett is such a lad, great video as always!
Awesome! I'll definitely pick up a set, I've had my protek drivers for like 3 years now and they've been bulletproof!
That’s good price under $100 for ball hex drive and nut drive now i want both of them
dynamite 3 pc hex driver set, $19.99 and the dynamite 4 pc metric nut driver set, $29.99.....do the math.
I want the whole set, wonder where I can buy a full set with everything shown here with a case
Great upgrade to tools ..keep up the great work Brett...
You are kidding right. I had my MIP/ Thorp tools for 20 years! I doubt Protek would ever last that long!
Yeah, slightly kidding.
-Brett
I don’t know man, I guess it’s because I haven’t used them ever, but I can say my MIP set is going on 5 years now. I drive arrma’s and traxxases so I’m always working on them.
I have had these dirt cheap dynamite wrenches for 11 years now. The red machined handles that cost 8each or the various 3 sets for 19.99. Keep spending 4 times more than you need too!
@@johnbasterson7938 thats the set i got..3 pc set.....no complaints
What can I say, I love my MIP drivers...😁.
#superlegit #SL
I love my MIPs too but the protek drivers do just as well at a much better price point from my experience
Super Likable video and tools! I'm going to order a set of the ball drivers now.
Awesome! Thank you!
-Brett
Nothing beats hudy
Very, very nice ProTek! MIP drivers are ugly and heavy. I personally appreciate the effort to lighten up the RC tool bag. The colored collars were great idea for easy identification. Another idea would be colored caps on the end of the handles.
That's a great idea!
-Brett
I bought protek drivers off you guys. One snapped straight away, one came loose and then thread left trying to tighten it lol. Mip for me!😂
How long ago? We've updated the tips.
-Brett
@@AMain_Hobbies not long ago. Maybe 2 months ago 😂 I've lost faith already🤔
MIP laughs hysterically in the background.
In my eyes, MIP is the closest thing to snap-on the rc world will ever have; without actually having snap-on
Sarcastic Laughter
-Brett
@@AMain_Hobbies maybe we can all just agree to disagree guys. The amount of broken tools speaks for itself. I haven't broken a single MIP tool in six years of wrenching.
I really like there Slick Look,there Silver Luster and everything S.L about them.
You're quite the Sophisticated Linguist.
-Brett
@@AMain_Hobbies lol it keeps going.
They look super good 👊✌️
Brett, my fidgeting friend, you missed the obvious #SL; those new tools are Sexy Looking!
Hell yeah they look super lovely #SL
Just purchased a vanquish vs4-10 pro from your shop.. had the itch lol need some tools
They look amazing
Nice! Bigger handles because my hands tend to cramp up on smaller ones when doing hours of building.
Why? Electric driver with speed bits...
@@MrSupermugen Yep. Use them too.
LOOL... This is my favourite video so far. Brett had me Seriously Laughing... haha #SL. Sick tool set and review though, i'll definitely be considering them
I am in the market for new drivers. My vanquish tips have broken twice. Want mip, but might check these out.
I think you'll like them.
-Brett
Why can't they have a flat spot on the handle so the tool doesn't roll away?
Because they buy the same cheap China crap from banggood and mark then up....
I always keep a magnetic tub around 6-8 in width. It’s saved me from losing so many things. And you probably already have one.
Very nice set of tools 👍🏼
✌🏼😎👍🏼
the dynamite 3 pc hex driver set is good...been around for years..$19.99....no complaints
They're junk
Also pleas make a tuning screw driver with the rubber cone end for stopping nitro motors like the Losi one
Let’s see an Amain in house RC kit. As Horizon buys up everything I like shopping from Amain more and more. Please make an in house kit. Crawler, racer, SCT, Monster truck I don’t care. Anything, I will buy it and love it.
I wish. Maybe one day.
-Brett
@@AMain_Hobbies just keep up the good work. Thank you Amain.
I've been an MIP guy for a while I'm looking for a different speed tip I think their quality has gone downhill. My first set of mip has lasted a long time. I've had three 2.0 though. My last one only lasted a couple months. I think I'm going to give these to try next. As always great video keep up the good work bro
Go snap on. $18 each
Awesome video super lit.
The drivers he spoke of, size does matter. No matter what they say.
Looks good 👍
HUDY NO.1 RC TOOLS!
Very cool
That's to bad I just got a traxxas set. Definitely my next set
No such thing as too many tools lol
Any idea when the nut drivers are going to be in stock?
Might be around a month unfortunately.
-Brett
Got em
What about the thump pic where do I get the colored anodized ends?
Those are the colored collars from Exotek: www.amainhobbies.com/exotek-hudy-protek-metric-hex-id-collar-set-exo1860/p827002
-Brett
Hey! I'm just getting back into rc. Found your channel and I'm loving it. Do these tools come as a full set?
Yes they do. What tools are you looking for?
This is the Metric Hex Driver Set: www.amainhobbies.com/protek-rc-trutorque-sl-metric-hex-driver-set-4-ptk-8416/p863873
And the Metric Nut Driver Set: www.amainhobbies.com/protek-rc-trutorque-sl-4piece-metric-nut-driver-set-5.0-5.5-7.0-8.0mm-ptk-8282/p752699
The SAE Standard Set is available too. Let me know if you need that.
-Brett
@@AMain_Hobbies I was trying to ask if the entire "TruTorque SL" set of tools (sae, metric. nut drivers , ball hex drivers etc..) came as a package. I didn't ask my question very well.😐 I've now looked fairly deep, I believe the answer is no. Thank you for your time sir. Keep up the good work.
@@MrSneakyGunz Oh ok, you are correct, not a complete full set, only the 4-packs at this time.
-Brett
✌🏻😎🏴Those are Sweet Looking.
"Sweet" looking. :)
RakinBill thanks lol
And what is the difference between straight hex, ball hex and nut drivers??
To those who own these, what is the length of the shanks themselves? Are they 100mm or 120mm?
There's about 80mm of skank sticking out of the handle. Remove it from the handle, there's maybe another 10mm.
-Brett
I keep telling myself my next set of hex drivers will be MIP but I have seen a few other good looking tools like these, im so confused! LOL
Get the MiP you won't be disappointed. I too was put off by the price, but they really are that good
Let me send you driver STEVO D. Email me with a subject title i'll recognize. BrettB@amain.com
@@AMain_Hobbies That would be awesome Brett. thanks buddy
Errrrr WRONG! MiP Baby all the way!
But can MIP tools do this? *Proceeds to play air guitar with 3mm...
-Brett
Yet the protek drivers have done just as good in my experience at less than half the cost of the MIPs, they're both great brands :D
What is the difference between metric and metric ball end driveres??
It refers to the tip of the tool bit, that will mate with the screw. A normal hex is straight and is designed for the driver to work in-line with the screw. A ball end is not straight, but is ball shaped on the tip, allowing the driver to work at an angle with the screw - much better for hard to reach spots. Downside - ball tips are not as strong as normal, straight hex.
Here is a great resource for more information: toolguyd.com/ball-hex-vs-straight-hex-tools/
-Brett
They look nice but why wouldn't you include the colored collars with the tools? Seems like a cheap way to make a few extra bucks.
ProTek does not sell the collars; they are made by a company called Exotek. They are only shown in the video because we really like them.
-Brett
Get the MIP's, Oman.. you won't be disappointed. Regards Neil
Like number 200 :-) Great videos as usual.
That's a Special Like #SL
Thanks.
-Brett
I only use the best MIP
But i might just try it i
Does it come in a set with that bag for it
Hey Michael. The 4-Piece sets include a plastic storage box, with locks, and interior foam. The Tool Pouch shown in the video is sold separately.
-Brett
Does anyone know the shaft diameter of these drivers? I've been looking for replacement tips that are 3mm diameter.
They are roughly 3mm; a few measured 3.1 and 3.05.
-Brett
@@AMain_Hobbies thanks!
Nice set I wish they made em in a 1/4" hex bit adapter. I'm over using hand tools like that I use my mini drill with super low settings wont even over tighten the cheapest plastic out there. Lol...with that said i had to go with the team associated set since price was rite and it had 1/4" drill adapter..but that new protek set are really nice for sure!
Here you go my friend: www.amainhobbies.com/protek-rc-trutorque-metric-power-drill-bit-tip-set-4-1.5-2.0-2.5-3.0mm-ptk-8243/p222022?r=0
All the glory without the war.
-Brett
all say the same I did for the MIP tool freaking sad on the price
I will stick with my Ifixit kit for the price of 4 drivers.
Input from anyone would be Greatly Appreciated on my questions, So what all Protek drivers would I need for working on anything Traxxas and maybe eventually an RC boat of whatever make/model? I’m gonna be buying a new Xmaxx and possibly Stampede 4x4 or 4x4 vxl. I’m definitely wanting the hex, flat heads, maybe star heads if available or needed, but drivers etc. I’m thinking of the new Traxxas $30 ratchet kit with the different hex and different drivers etc. I really need to know Asap so I can get some tools ordered. Thanks
Yeah, good question. I would start with the 4-Piece Hex Set; that will service the hex screws on all those Traxxas vehicles. Here it is: www.amainhobbies.com/protek-rc-trutorque-sl-metric-hex-driver-set-4-ptk-8416/p863873
Here is a phillips: www.amainhobbies.com/protek-rc-trutorque-sl-philips-screwdriver-4mm-ptk-8432/p942450
And a flat head: www.amainhobbies.com/protek-rc-trutorque-sl-flat-blade-screwdriver-4mm-ptk-8429/p942445
But you primarily need the hex set, which includes the 1.5, 2.0 and 2.5mm hex drivers. Those will be your go-to tools on R/C for 90% of wrenching. Then it's just odds and ends as the need comes up.
I hope this helps. Shoot over any other questions you have.
-Brett
Hudy tools for me.
Thank you for the review! I purchase a bunch of them. I received my first order and the end caps don’t spin freely. Any Advice??
Hmm, that i'm not sure of. The caps are secured with clip rings from the inside, if they aren't spinning that clip may not be seated correctly? Maybe they're defective? You could try contacting our CS team to see if you can get some new units. Is this issue with all the caps, or just a one/two?
-Brett
@@AMain_Hobbies It is with all 4 of the Metric hex driver set. I have an order of ball end and Nut drivers coming soon too
They rotate, but if you try to spin them they stop right away
I'm wondering. Did you ever try out a Wera Kraftform Plus 354 Hex-Plus 2mm Screwdriver. It's 9$ on Amazon but imho worth it.
No, I don't think we've tried that.
-Brett
@@AMain_Hobbies I personally would love to see a comparsion from a pro, i'm using them for years outside of the RC Hobby. And i personally think they are better, but yeah i'm a IT guy i'm not really a benchmark for this :).
Quick question maybe a little loaded but here it gos. I’m getting ready to order 1/5 scale short track truck. What are the basic tools i should have right from the start.
Thx
Probably all the normal hex sizes like 1.5, 2.0, 2.5 and 3mm, plus some other larger sizes. Pliers, nut drivers, wheel nut wrench and a car stand are great to have. What vehicle is it and we can look in the manual to see what they recommend for tools?
-Brett
@@AMain_Hobbies Im looking at the Losi Short Track 2.0 and the Rovan.
@@christopherbuchanan2570 Do you mean the 5IVE-T 2.0? There are some tools included with the 5IVE-T, such as:
-Wheel Wrench
-Rod end/shock end tool
-Multi wrench
-2.0mm, 2.5mm, 3.0mm, 4.0mm allen wrenches
-Spark Plug Wrench
Upgrading these tools down the road is a good idea, especially the allen wrenches. That should cover you for most things, and then you may need to buy different tools when the need comes up. Hope that helps.
-Brett
@@AMain_Hobbies Brett, Thx yes I meant the 5IVE-T 2.0. and yes the Allen wrenches especially.
Thx for the help.
#SL #SL 😄
And what is the difference between metric and normal??
they the same metric are mm and imperial is fraction
Sick sick sick! How can I start getting AMain products in South Africa without having to use ebay
It depends on the products and if the manufacturer has any International shipping limitations. For some items you may want to stick with eBay, others products, like ProTek R/C, you can buy direct at AMainHobbies.com.
-Brett
@@AMain_Hobbies so AMain ships TO South Africa?
@@dangrows_za4798 Damn straight we do bro. If the shipping carrier will deliver to you, we'll send it! #ShippingLogistics #SL
-Brett
What is the benefits of the ball hex driver ?
With a straight Hex, the driver must be perfectly straight with the screw. With a ball, the driver can be at an angle for hard to reach places. Really handy for some situation. I keep a ball 2mm and ball 2.5mm; they are used rarely, but they're a life saver when you need them. The downside to a ball driver is that they are not as strong as a standard straight hex.
-Brett
Can you remove the caps at the back ?
No I don't think so. I believe they're held on by an e-clip on the inside.
-Brett
@@AMain_Hobbies thanks alot
Anyone have experience on this brand? How's the tip? Thats my main concern...my former hex keep loosing their tip shape though they are double cheaper than this. Maybe its time to invest on real tools;) any info gladly appreciated..
My Thoughts exactly. Im following, don't mind me hanging out. 😄
MiP nuff said, just get them, you'll never have to pay for another tool again
@@Crewchief227 built to last i guess:) Thanks bro!
What do you say about mugen seiki prospec hex wrench??
They are amazing, minus 1 point for not being SL tools. No, I'm kidding. Just about everything Mugen makes is world class. You can't go wrong with anything they make; especially their 1/8 competition vehicles.
-Brett
@@AMain_Hobbies I want will buy this Mugen tools for use it with all my Rc, kyosho, traxxas and axial.
I just got a set of these trutorque sl drivers and the ends do not spin easily. Do they free up or do I need to oil them?
The end palm caps should spin super easy. Is this the case with all handles?
-Brett
You might want to try a little oil, see if that helps. But just using them should help free them up over time.
-Brett
So you're saying, size does matter? Who was that guy you were talking to without a hat?
I hate having to say this, but the colored collars should be included.
You still do some good presentations, even when the goof is not out.
He's just some guy trying to steal my job. Wish we had thought of those colored collars but Exotek offers those, so that's there thing. I agree though, being a fan of colors.
-Brett
Don't take this wrong but I'm surprised and delighted that you actually take the time to reply to my comments. Most people in your place blow us peons off. Thank you for this.👌👍👍
And what is SAE??
It is the unit of measure for North America. The alternative would be metric.
-Brett
They look great but the handles are round. Very annoying when it rolls off your workbench onto the floor.
What are the length of these tools?
They're about 7.5" long. (4.25" handle, 3.25" tip).
-Brett
@@AMain_Hobbies Boo-ya! Thanks!
Wonder why amain won't review the superior arrowmax set, even lighter than protek, with even better more durable materials. I guess it's cause protek offered more cash for this biased review. :/
Protek is Amains brand 🤡 . It’s okay for companies to promote their own products rather than what is superior in your useless opinion.
So MIP or these folks??? Asking for a friend...
Mip hands down..
Prices for RC tools are still a joke!
many many companies make Hex bits from hardend drill blanks... but guess what... they are still expensive. the tooling to make those tools are expensive and precise.
somewhat lavish
Why they never made a full set of pro tek tools. I’ll Never understand.
Hudy stopped . Arrowmax stopped. There is a huge gap in the market .
SHUT UP AND TAKE MY MONEY!
Great Video, you should send me some to review on my channel, I reviewed MIP and would like to compare them
HSS is too soft for the small sizes.
contenplating buying a set of decent tools to last me a lifetime. ill rather buy once and skip the cheap tools 10 times. MIP's are half the price of these..do i rather get these because they look nice and are tough? or Arrowmax honeycomb black and gold? hmmm or do i get the MIP that looks like walmart tools but are the best...apparently?
Sorry but anything with a soft aluminum handle where the grub screw secures the tip just doesn't cut it, it's only a matter of time before the screw pings across the room stripping the threads and ruining your day.... MIP FTW!!!
dynamite pcs hex driver set..$19.99....dynamite 4pc metric driver set ..$29.99.....total $50....his set above?.....do the math...i got a set with no complaints
Ggrrrrrr........ No 1.3mm, no metric set with .05" & .05" not available as a single. Makes em a no-go. :-(
Of course you'd call it the best because you sell it.
Arguably... the best. But they're not really. It's a joke. There are a lot of great tools out there and the SL Drivers a great option.
-Brett
Still cant beat MIP
It isnt worth 50 bucks though
Idk I had all the tools necessary, no need to buy specialised overpriced bs.
Best tools...lmao. You guys sell the best RC tools, and they aren't yours. MIP.