THE BEEP- We appologize for the beeping in the video. We're not certain what it is. It was not heard in the editing process, but popped up after it was uploaded. The information in the video however is still very helpful.
Bruh that's weird. As I was watching this video, I was charging my battery for my car in my bathroom and it finished and beeped during the video. Maybe that's what the audience heard lol.
"..because I like to tell people that you really should keep your car clean" I do that, I don't tear my car down and deep-clean it, (I never run in water, mud, sand, or other nasty conditions) but can suggest some helpful cleaning tools: 1) The trusty toothbrush, I use used ones (fully cleaned of course), to save money. When your toothbrush gets black and nasty (stop using it before then, or else you'll smear all that stuff around your RC!), use some kind of gentle-ish cleaner (degreaser, rubber remover, ect.) and clean it, rinse, done! 2) Q-tips, great for those small nooks and crannies, I don't need to say any more! 3) Teacup-spout wire brushes, a bunch of bristles arranged in a cone/taperd shape shape woven onto a twisted peice of wire, hard to explain but it's simple, very similar to those nylon straw brushes for cleaning metal straws. Hope this helps, I use all of these tools everytime I clean my RC, they are CHEAP and effective!
Greg, can you suggest one of your videos that goes over changing a vehicle from brushed to brushless and what that entails (other components needed, etc.) Anything would be helpful! Thanks.
The video explanation is very good. Not long ago, I bought a set of this renhotecic brand tool set, and just watched this video to learn how to use it. It is recommended that friends who like to repair by themselves can prepare a set.
Two words concerning tools friends, Harbor Freight. You can get halfway decent tools there. Go for it. The tools you cover are specific for RC. Others to consider are side cutters, specifically designed for trimming plastics and wire cutting. Dental picks are a MUST for RC cars, good for removing small stones from between parts. Get the hex drivers with the ball if you can, they work better in an area where you need to come in at an angle. Invest in a small metric socket set. Things he never covered is a solder station for wiring and I never saw a service stand. A must for working on any RC vehicle.
Oh man you almost gave me a heart attack with that electric buzz kinda beep, I thought they were coming from my headphones 🎧 , i was like (WTF man, not again)... See i juat recently send back a pair i had bought because they were defective and stopped working. I recently received my new ones about a week ago, so right away that sound scared me man. Holy moly
I'm watching this 2 years later... Lol. Thanks for the video, im looking to get back into RC cars. I havent heard a flat-head being referred to as a flat blade. Very interesting
One tip is not to cheap out on your tools or they'll frustrate you just as much as the included junk! Especially do not cheap out on hex or torx drivers. $30 for a set of 4 hex drivers? May sound expensive, but when you actually USE the tool you find out quickly that they're made to a higher standard and using better materials, and they just make your life easier and working on your vehicle more pleasurable. My cheapo Chinese hex driver chewed up and nearly rounded out a spur grub screw yesterday; went to my LHS, spent way too much on 4 drivers (1.5mm,2mm,2.5mm, 3mm), but had zero trouble getting the grub screw out even as fouled up as it was. Nice sharp machined corners, correctly sized bit tip (most hex drivers tend to be under-sized in my experience).
I don't think any rc tool manufacturer makes a "complete tool kit" because there are so many different rc manufacturers and different types of rc (i.e. car, truggie, truck, boat, helicopter, plane, electric, nitro, gas, etc.) out there. It would be almost impossible for an rc tool manufacturer to make a complete tool kit and have it affordable and compact enough for travel. This is why there are so many basic kits available for purchase but fewer specific kits and no complete kits.
I had bought the traxxas tool set similar to the one in this video and ended up having to rebuild my eb410.2 center diff three times because the screws kept stripping out. Definitely a great investment into higher quality tools.
@@gonzodetroitify the Traxxas kit was the one stripping the screws, as soon as I bought new drivers, it worked and I was able to put it together correctly lol
Also specifically if you are working on Japanese kits (Tamiya) you are going to want some JIS (Japanese Industrial Standard) screwdrivers. JIS looks like a regular Phillips head but it is NOT, the profiles are different and using a Phillips head on a JIS screw will make you crazy over time and ruin the screws.
Liked and Subbed. Just bought my 8 year old daughter a Quantum XT for her birthday. Took it out for first run and about an hour into it we ran into a fence post and broke the pillow ball from the suspension arm ( think thats what it's called) . That said I am good with tools and want to fix on my own. Where can do you suggest I buy parts online? Thanks for the video and the info .
How you doing guys I am texting to ask a question I got a 1/8 scale Kyosho and I just put a new carburetor on it and I cannot get it to idle down what am I doing wrong
I cant find it ANYWHERE lol does anyone know if the Redcat gen7 comes with any tools in the rtr kit? My rig is coming soon and something is better than nothing until I get to the store. Lol
I had been using just regular hex wrenches on my cars for the longest time, I recently bought these www.amazon.com/gp/product/B06XC9CT49/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 and they make a world of difference, so much better, I might get a reamer but I'm most likely about to get lexan scissors. I recently did a 2" extension on my classic T-Maxx and am wondering which body to buy for it, I don't think a 3.3 body would fit.
The biggest problem I find is the tools are too damn short for regular human hands. I have no idea why anyone would think a driver of ANY KIND should have a short handle. Not only are they difficult to hold, but they screw your hand up if you need to do something like bead locks on a tire. Forget about any cheaper one size handle fits all st that fits several sizes of driver end. Invest in regular size tools that fit your hand. If the handle comes off, don't buy it. It's GARBAGE. Cheap tools strip screws and wear out prematurely. Spend the money and buy tools that do not require changing heads or multitools. Buy tools with FIXED heads. I learned the hard way, you get what you pay for.
whats the name of the tool cause my rc truck is not work or driving so it wont go forword or backwords do you might know how to fix it im just geting into the rc hobby cause i watched so many vidoes about rc but this apened last chrismas so can you give me help
I agree, Im in the process of building a buggy kit for racing and I bought the traxis tool set. 4 Days after I stopped using it my fingers are still sore from constantly changing the heads.
The video explanation is very good. Not long ago, I bought a set of this renhotecic brand tool set, and just watched this video to learn how to use it. It is recommended that friends who like to repair by themselves can prepare a set.
THE BEEP- We appologize for the beeping in the video. We're not certain what it is. It was not heard in the editing process, but popped up after it was uploaded. The information in the video however is still very helpful.
How there, can that hex driver set be used with a power drill?
Bruh that's weird. As I was watching this video, I was charging my battery for my car in my bathroom and it finished and beeped during the video. Maybe that's what the audience heard lol.
@@kyle-tx7ce Did you ever fix it?
@@portalsam7 yes mate
No biggy jusr next door burning down
Best advice ever. Proper tools makes a huge difference. Saves lots of time and hardware. 👍
Just like a real car 🤣🤣 good tools is the difference between lots of cursing and bloody knuckles or clean hands and a smile lol!
I have been into rc's for 10 years and I have been using the free traxxas tools the entire time
"..because I like to tell people that you really should keep your car clean"
I do that, I don't tear my car down and deep-clean it, (I never run in water, mud, sand, or other nasty conditions) but can suggest some helpful cleaning tools:
1) The trusty toothbrush, I use used ones (fully cleaned of course), to save money. When your toothbrush gets black and nasty (stop using it before then, or else you'll smear all that stuff around your RC!), use some kind of gentle-ish cleaner (degreaser, rubber remover, ect.) and clean it, rinse, done!
2) Q-tips, great for those small nooks and crannies, I don't need to say any more!
3) Teacup-spout wire brushes, a bunch of bristles arranged in a cone/taperd shape shape woven onto a twisted peice of wire, hard to explain but it's simple, very similar to those nylon straw brushes for cleaning metal straws.
Hope this helps, I use all of these tools everytime I clean my RC, they are CHEAP and effective!
Greg, can you suggest one of your videos that goes over changing a vehicle from brushed to brushless and what that entails (other components needed, etc.) Anything would be helpful!
Thanks.
Harbor Freight is amazing for this hobby. Tools and powerstations.
The video explanation is very good. Not long ago, I bought a set of this renhotecic brand tool set, and just watched this video to learn how to use it. It is recommended that friends who like to repair by themselves can prepare a set.
Im new on RC-hobby, thanks for your videos, they have helped me alot.
Two words concerning tools friends, Harbor Freight. You can get halfway decent tools there. Go for it. The tools you cover are specific for RC. Others to consider are side cutters, specifically designed for trimming plastics and wire cutting. Dental picks are a MUST for RC cars, good for removing small stones from between parts. Get the hex drivers with the ball if you can, they work better in an area where you need to come in at an angle. Invest in a small metric socket set. Things he never covered is a solder station for wiring and I never saw a service stand. A must for working on any RC vehicle.
Your channel and content have been an invaluable resource for me as I just start getting into the hobby. Thanks for the great content. Subscribed!
Oh man you almost gave me a heart attack with that electric buzz kinda beep,
I thought they were coming from my headphones 🎧 , i was like
(WTF man, not again)...
See i juat recently send back a pair i had bought because they were defective and stopped working. I recently received my new ones about a week ago, so right away that sound scared me man.
Holy moly
Buy MIP hex drivers you will save money in tha long run ...I wasted $75 on junk cheaper brand hexs before I got smart and bought MIP
Shane Rose can't seem to find the metric mip set. Sold out..everywhere
I definitely need a pit mat for the coffee table lol!!!!!!
I'm watching this 2 years later... Lol. Thanks for the video, im looking to get back into RC cars. I havent heard a flat-head being referred to as a flat blade. Very interesting
So who uses the kit L-Wrenches as the primary tools to work on their RC car?
I used them when I got my first rc since I couldn't afford the tools and still can't lol it's annoying but gets the job done :)
I've got about 40 of them that I've taped together to form a mega wrench.
i just assembled a nitro rustler from scratch using the little L wrenches.... Never again!! my finger tips are raw.
Me
RCDriver_Online I
One tip is not to cheap out on your tools or they'll frustrate you just as much as the included junk! Especially do not cheap out on hex or torx drivers. $30 for a set of 4 hex drivers? May sound expensive, but when you actually USE the tool you find out quickly that they're made to a higher standard and using better materials, and they just make your life easier and working on your vehicle more pleasurable. My cheapo Chinese hex driver chewed up and nearly rounded out a spur grub screw yesterday; went to my LHS, spent way too much on 4 drivers (1.5mm,2mm,2.5mm, 3mm), but had zero trouble getting the grub screw out even as fouled up as it was. Nice sharp machined corners, correctly sized bit tip (most hex drivers tend to be under-sized in my experience).
Very cool info for beginners Cheers
word of warning. Don't buy the Dynamite (black and orange toolset). They strip very easily.
I use mine almost every day seems like working on them never stops but it’s fun as hell to work on them too
My TA Multi-Tool set has been invaluable to me...
Can you please recommend a complete tool kit that comes with everything included?
I don't think any rc tool manufacturer makes a "complete tool kit" because there are so many different rc manufacturers and different types of rc (i.e. car, truggie, truck, boat, helicopter, plane, electric, nitro, gas, etc.) out there. It would be almost impossible for an rc tool manufacturer to make a complete tool kit and have it affordable and compact enough for travel. This is why there are so many basic kits available for purchase but fewer specific kits and no complete kits.
Ball cuffs caught my attention
Thank you for posting this video. I am new to RC. More newbie videos, please.
I had bought the traxxas tool set similar to the one in this video and ended up having to rebuild my eb410.2 center diff three times because the screws kept stripping out. Definitely a great investment into higher quality tools.
Is that because you used the TRAXXAS kit your diff screws were stripping or you brought TRAXXAS to stop stripping screws 🤨🥲
@@gonzodetroitify the Traxxas kit was the one stripping the screws, as soon as I bought new drivers, it worked and I was able to put it together correctly lol
I know you have a couple magnetic trays! Lolol. Great video. Thanks man.
Just upgraded my stock tools with a 7in1 set that cost $8... I've also got most of those other tools except for the hobby knife and brushes
Thanks I will be picking up the kit soon. !
Nice video
Super helpful thx.
thanks alot of great info great video
Also specifically if you are working on Japanese kits (Tamiya) you are going to want some JIS (Japanese Industrial Standard) screwdrivers. JIS looks like a regular Phillips head but it is NOT, the profiles are different and using a Phillips head on a JIS screw will make you crazy over time and ruin the screws.
And when do you have to start taking apart the diff, shocks and other stuff like that? After like 10 runs or something? Hehe. Thanks!
Thanks for the great vid! Very informative.
What is that buzzing noise?
Isaac Clark I was wondering the same thing
Isaac Clark was asking that same question
Isaac Clark the government controlling your mind.
You really need lexan scissors to cut open a body😂😂- pro tip lol
I agree
Just subbed in Hope's of finding helpful newb vids on nitro and on the T-Maxx specifically
thanks for all your advice on getting in to rc, i think i think gunna go with a traxxas slash 4x4
Some of the screws you need a SUPER SUPER TINY hex or star bit and I can never find a small enough bit
Hi,
Very grateful for you. Is there any tool to replace the pin in the wheel hubs?
Thank you
Liked and Subbed. Just bought my 8 year old daughter a Quantum XT for her birthday. Took it out for first run and about an hour into it we ran into a fence post and broke the pillow ball from the suspension arm ( think thats what it's called) . That said I am good with tools and want to fix on my own. Where can do you suggest I buy parts online? Thanks for the video and the info .
Good info for sure. Just curious, what is the collet size (1/8, 5/32, etc.) on the Dynamite ratchet handle in the kit? Thanks in advance.
I keep my tools in a cardboard box and newspapers for my mat.
i know you didnt want to go deep into details but not mentioning tire glue?! C'mmon bro, tire glue is pretty much a must...
1:56 you should get a pick
Reamer - Unibit. 😊
What the hell was that buzzing noise ? At one point I thought aliens were hacking my cell phone.
JR BORIQUA7 I started pushing on the headphone jack on my earbuds thinking my ear buds were dying... lol
These « L » wrench are sometime the only way to access a screw
Nail clipper- when u r building a kit n take parts off the parts tree....use tge nail clipper to cut the excess tab off
You can also use a tool called a sprue cutter. I use them when taking pieces of off the trees when working on HO Scale train buildings.
Yo can you show us your work place like the place you maintain your rc cars?
can you help me which is the best tool set for Traxxas Stempede 4X4 VXL? Thanks alot.
👍
The Traxxas hex drives WILL snap on you, they are junk. Buy ProTek RC "TruTorque SL" Metric Hex Driver Set (4) (1.5mm, 2.0mm, 2.5mm, 3.0mm) instead.
How you doing guys I am texting to ask a question I got a 1/8 scale Kyosho and I just put a new carburetor on it and I cannot get it to idle down what am I doing wrong
I cant find it ANYWHERE lol does anyone know if the Redcat gen7 comes with any tools in the rtr kit? My rig is coming soon and something is better than nothing until I get to the store. Lol
I had been using just regular hex wrenches on my cars for the longest time, I recently bought these www.amazon.com/gp/product/B06XC9CT49/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 and they make a world of difference, so much better, I might get a reamer but I'm most likely about to get lexan scissors. I recently did a 2" extension on my classic T-Maxx and am wondering which body to buy for it, I don't think a 3.3 body would fit.
Can you help me that what type of acecesoreis i need to make a rc car in short can you give me a list
The biggest problem I find is the tools are too damn short for regular human hands. I have no idea why anyone would think a driver of ANY KIND should have a short handle. Not only are they difficult to hold, but they screw your hand up if you need to do something like bead locks on a tire. Forget about any cheaper one size handle fits all st that fits several sizes of driver end. Invest in regular size tools that fit your hand. If the handle comes off, don't buy it. It's GARBAGE. Cheap tools strip screws and wear out prematurely. Spend the money and buy tools that do not require changing heads or multitools. Buy tools with FIXED heads. I learned the hard way, you get what you pay for.
I can't decide between MIP or The new Protek tools. Which did you go with. I have big hands.
Reamer also can be use as a self defense tool. Used once against a robber last year, poor bastard suffer from three hole in his back.
whats the name of the tool cause my rc truck is not work or driving so it wont go forword or backwords do you might know how to fix it im just geting into the rc hobby cause i watched so many vidoes about rc but this apened last chrismas so can you give me help
What is the camo truck in the back
Do you have links to all these tools?
WD40 is a must...
Salut my friend super car super video subscribe subscribe .
What is that beeping noise
I don’t dive ,but float,so wrong channel
I thought the headphone jack in my phone was going kaput...
Second
Buy better driverset ive that case set it broke in under a yr.
MiP
why 😭😭
That beeping is fawkn annoying cuz
Jaime Castillo You’re welcome for the free information Chief.
That multi-piece toolkit is garbage. I know I own it. I replaced all of these junk tools with Ed's. MIP are also great.
I agree, Im in the process of building a buggy kit for racing and I bought the traxis tool set. 4 Days after I stopped using it my fingers are still sore from constantly changing the heads.
++
First
Wth is that beeping
That multi tool set is absolute trash.
Vid is making weird noises
Luke Vantiem it's obama
I was so scared that was my iPad lol good to know it’s not just me
That beeping is brutal. I'm out.
Being brainwashed with that beep noise.
Then our evil plan is working! Did you send us the big box of Double Stuff Oreos yet? If not, please rewatch the video.
The video explanation is very good. Not long ago, I bought a set of this renhotecic brand tool set, and just watched this video to learn how to use it. It is recommended that friends who like to repair by themselves can prepare a set.
👍