If you guys are keen to see more Toughbuilt, check out my full length look at the stack tech, plus a load of accessories and tools here: ruclips.net/video/A3CIc1s4rQM/видео.htmlsi=24l5j5yFfo7HCjLs
I’ve always skimmed past them before when I’ve seen them in B&Q, perhaps they’re worth further consideration. 2/3 years ago I found a Homebase own brand flathead driver, probably about 10mm. I used it for something ( chisel, podger or the like ) at the time to protect my expensive Klein driver. Afterwards I found a vertical slot on the outside of my tool bag and mindlessly put it in. I’m a self confessed tool snob, but damn, that driver is by far my most used tool………………. 😂😂😂
2:25 I have this spanner but it is made by crescent tools and you can get a socket adapter for 1/4 " screwdriver bits and 1/4" & 3/8 socket adapter. Did try and upload a Picture( but the app doesn't support it ) and the guy at work gave me the different adapters from another make, oh maybe that was Sata tools
I bought an autoloader from Festool in 2009 and it still works fine. There is a text on the handle "MADE IN CANADA - U.S. AND FOREIGN PATENTS PENDING." I have one for Torx bits and one for Hex bits, very handy. Next time I'd like to go to the Eissenwarenmesser, didn't know it existed ...
yes, it's been out a while. I've had one like 15 years or so. Everyone loves to "borrow" it and I have to go find it. Bought a second one to hide so I didn't have to waste time finding the first one all the time! hehe... but it is handy, you don't lose the bits, and you can pull them out to swap a different one into the rotation. 8^)
I can just imagine Dave the bricklayer rocking up on site with his custom engraved £540 Towel, soon lost for ever in the site skip whilst he takes his morning dump in the portaloo
Hi maybe I can help , I like you searched Amazon in comes under a different name , type in Crescent CPTAW8 11 piece3-in-1 X6 Pass -Thru £31.44 they also have a bigger set 25 piece CX6PT25 for ££53.06 hope this helps and for anyone else who is interested.
Respect for the way your were so friendly and polite even after seeing so many different salesman and not getting snippy or rude despite I suspect getting quite tired.
I got one of these 4 years ago at the Sandown park show. It doesn't get used very often but useful putting up shelves, mirrors and pictures if I don't have a long level to hand.
SATA Tools are a secret gem of the tool world. I do precision machining of arms and tools of the trade for some American agencies and use SATA quite often for assembly. Solid tools. This is the first episode I’ve seen of your show. I like it. A new subscriber and looking forwards to future content.
That little foam chat at 12:48 was really interesting. I was never sure of the differences between your product and everything else, but your explanation was very insightful.
Hi James, I am very glad to hear you say that! I don;t usually bring it up in the videos often because I know not everyone is as interested in foam as I am but I am glad it has resonated with you mate!
@@ShadowFoam brother I'm from India im not able to get hands on any of the tools bro maybe you start to sell them here too if we wanna import the shipping cost is more than the actual product cost..
I really like the Tough Built line so far. They seem to keep coming up with new ways to make tools more functional at a reasonable price point. Love the Shadow Foam too!!
It's 11:00 pm (in Australia) and I've discovered this channel. What a tool fair! Some obscure brands I've never heard of that are really the best of the best tools. Tomorrow's going to be a long day watching your videos.
Hi, I have to say that the margin marker is my favourite tool. It maybe a simple thing, but it is amazing how many people notice the exacting margins I have around my door frames,and this will make my life easier having this, amongst all the other freebies.
Quirky Tools: I recently bought a vintage push screw driver. It's basically a manual power screw driver that does not spark. I was excited about it. As soon as it came in my 12 year old daughter snagged it for her own tool box. Now I need to find another vintage one.
Next year you could have a shadow foam road trip and get supports in show reviews, Being a successful company adding unique useful tools sounds a match in heaven 😀 😊
Love the post mate, I normally won’t watch an hour long video but you proved me wrong. Absolutely loved it and didn’t want it to end. Thanks for all your passion. Ps Them Sata sockets look Unbelievable for the price, i can’t comprehend how they can actually make a profit on them for less than £30 …….Keep it up Fella.👍👍👍👍👍❤️❤️
I was selling the Autoloader probably 12 maybe 15 years ago, they were supplied by Festool when I was a Festool reseller here in the UK. A great product, they are so good that my daughter and my wife each have their own one in their tool kits. Remember the ladies in your life need a tool kit! Trade shows like the one in Germany are hard work, yes they can be enjoyable. The hardest show I ever did, working the booth and also going around the halls was the AAW Show in Atlanta Georgia in 2010, which was a four-day show. With the big shows you need at least two days to go around and then a third day to revisit the important booths if you need to tie down business. For me, the SATA wrench with socket set made a lot of sense but my daughter would go for the Lego set.😊
I love a tool and given our current project of converting our van to a camper I’ve just seen at least three we’d benefit from!! The Canadian screwdriver is genius!
The thing I really liked about the BMI booth is while theyre trying some new stuff.. trying to innovate.. theyre also doing traditional things which I think is cool. And while not every idea is a good idea you still learn something.
Sata tools have been around on Amazon in the US, for a while. That type of spline looking socket is made by by many brands, now. I haven’t bought into them yet, but the pass through is get more and more desirable to me. Looking up the Sata crescent wrench. Sometimes it’s nice to travel with only a few tools to get a lot of jobs done. ToughBuilt looks nice. Another tool manufacturer I’ll look up. Still up in the air about the stacking boxes. I carry a canvas tool bag. My drill bit box, 2 cordless, 4 batteries, set of box ends, tape measure, level, bit set boxed, and a standard socket set and ratchet. Covers every thing I need. No one makes a box 5 inches high, it’s all 6+ inches and will not fit under my truck seat. Width and depth on the systems are good, but all are to tall. My canvas bag stuffs under nicely.
I wonder if it has a chart inside or inside the lid/flap that indicates what things might have what angles.. or do you just line the edge up with each and find a match? Nice to have choices to get the proper angle!
Hello there, the tool that interests me the most from this segment would have to be the SATA Universal Driver set, especially the fact that they have the pass through feature on the sockets. Pass through sockets are non-existent in the part of the world where I'm currently working. Super innovative set and well thought through design. Great segment, I really enjoyed learning about the various innovations from the trade show. Thank you
Watching these videos is basically a gateway drug for buying more tools. Just ordered the SATA spanner. I have used shadow foam on loads of my tools. Hopefully they do kits for Peli cases in the near future.
Hi, i'm a french viewer of your channel and just loved your tour at this german tool fair !! I think the Sata wrench would be my prefered tool from this stunning list. Keep on making us discover some new and great tools.
Amazing new tools met you at the nec motorsports you show brilliant breakdown and description of tests abilities of tools and shadow foam and your detailed descriptions and decent honest no promos of the tools in the video and funny bmi conversation with the grandson of inventer
I have used that Autoloading screw driver for years. It is a great piece of kit. I caught my first one from Canadian Tire they are now sold through Lee Valley.
Not sure how you did it every time I go to an event at the NEC it knackers me out to think that the expo was bigger would have be bedbound for a few days especially carrying round bags of goodies😂 great video as always👍
Loved most of the top 10. But if I had a choice the Lego pliers to give to my grandson would be great. He loves getting out to the shed and helping grandad. I hope he keeps his enjoyment of working with his hands as he grows up.
Great video but I'm also impressed at just how informative the comments section is! Great job creating a such a cool community and hope we can catch up again at Makers Central!
Thanks for sharing your experiences at the Fair and bringing us another entertaining and informative video. Looking forward to you visiting the Fair next year on an extended trip to explore the products from the smaller manufactures. My favourites from the were: - Margin Marker, - SKIL Electric Screwdriver (volt sensing great idea), - Sata Universal Driver, - Autoloader 6-in-1 Multibit Screwdriver - interested in purchasing a couple of these, - Magnum Easy Grip Pliers - Proclick Pouch - I'll investigate this line to replace my Toughbuilt "Cliptech" belt and pouches as the suspenders supplied will not connect to the belt, even after communicating with the product manager in the USA they were unable to sort out replacements. Bolton Tool Fair was enjoyable and picked up a few bargains. Keep making this great content. Please enter my name in the draw.
Really appreciate your honest and down to earth approach in these videos and first impressions. Keep up the good work! I’m also heading to my first tool fair in Exeter later this month and I’m keen to know if there are any particularly interesting or quirky tools to keep an eye out for. Any suggestions?
The OX foldable ruler design, was originally made of wood and brass and was the British joiners standard ruler before the tape measure and was a very versatile measuring rule.
Never heard of the flex stuff. Have seen that advert before though. Another great video. Did wonder if I’d watch it at an hour long but was a good watch and kept it interesting!
This was presented to me by “the algorithm” and I found it fascinating. I’ve been an aircraft engineer and car/motorbike tinkerer for many years and I do like a nice tool (Missus!). I had no idea just how big an industry it is. I’m aware of quite a few brands but nothing like the amount at that Cologne show. Nice one.
Awesome video, interesting tools! On another note the display of the tools behind you on the wall is really nice. Might be looking into doing something like that 😊
Thankyou for the down to earth way of your presentations. The honest reviews. You I can trust, with your advise, and amazing foam. The tool that took my heart was definitely the Canadian built instant screwdriver bit swap unit. That would definitely find a way into my toolbox, along with the Skil electric screwdriver. Keep up the excellent work.
Loving the new L Box contractor and Proclick… I have a skil router setup and love the quality…. That electric screwdriver looks great…. Nice quality… Loving seeing all these innovative products….👍❤️ I need more tools to keep my school running smoothly….😂😂❤
Pico do an excellent tape measure with a window on the top and a hole at the hook. You fold out a little pin on the base, put a pencil in the hole, pull the tape until the desired length is displayed in the window, and then you can spin a perfect radius. I use it much more than I thought i would.
I have to say going around that exhibition I would have been there for ages. I love ingenious tools. Starting to fall for the toughbuilt bits. Thanks for the great videos and content 👏🏻
Well, you are in luck Mark, because you are one of the winners for this giveaway! We drew the winners in one of our latest videos and your name was picked out fifth! Congratulations, please email my staff at m.wood@shadowfoam.com to organise shipping your prize to you!
Definitely "SATA 11 Piece X6 Pass-Thru", already put that in my amazon cart and waiting for the next salary 😅 As for SATA, that's a child company of Gearwrench. I love using their ratchets and spanners. They have won a few of project farm group tests and they are reasonably well priced to boot.
I would be interested in both seeing more booths in the show next year and would buy the tools if you brought a couple over. Keep it up, another great vid 👍
I'm here looking into the convention for 2025. Now just to convince the wife. I'm online pricing that Sata adjustable. Love it. Haultafors ruler on the way. This episode is costing me a fortune.
Hi, Thank you for a brilliant video, what a great enthusiasm you have for tools! As a keen diyer I love to see new and useful additions to the toolbox. That Cologne tool fair looks awesome. I'm definitely looking into Sata products now, and the Skill driver is great. Best wishes and thanks again
Absolutely love your video, all the tools you reviewed and the tools display wall behind. Tools are pretty addictive especially innovative ones. I loved the pro click system, the l boxx system anf the full OX triple stack setup. Did I say I’m in love with the display wall behind you 😍
Keep up the good work Jonathan. Have been using foam inset tool boxes with the military for years. Just trying to set up my own collection and you keep providing too many options and tools i would like to
I love your shadow foam stuff. I’d love to be able to make a tool wall for our community workshop with it. You gotta love a tool show👍👍👍Germany makes great tools with great steel.
I love the adjustable wrench with the sockets that fit into the ratchet at the end, what a cracking idea. Just started getting a few Ryobi items inspired by your shadow board, just need a few more bits and then can get a board made up. Thanks for all the content, great channel and look forward to what’s next.
If you guys are keen to see more Toughbuilt, check out my full length look at the stack tech, plus a load of accessories and tools here: ruclips.net/video/A3CIc1s4rQM/видео.htmlsi=24l5j5yFfo7HCjLs
Great stuff, just subscribed to your channel! Thanks
I like how you put the 'Skil' foam in it's place😂
First time watching. Great channel. Will binge it now !!
WOW I had no idea there where so many tool brands. Bloody amazing. Subed
Did u see anything to stop tool theft from vans there at the show??
This is the type of show we need in the UK! I love the diverse mix of national vs independent manufacturing.
In the States, we only have these shows for tradesmen. I think they would be very popular if they opened them up to the public.
Tough Built might be my new favourite brand, the prices are so affordable for the average tradesman and the quality is unreal! Love it!
I’ve always skimmed past them before when I’ve seen them in B&Q, perhaps they’re worth further consideration. 2/3 years ago I found a Homebase own brand flathead driver, probably about 10mm. I used it for something ( chisel, podger or the like ) at the time to protect my expensive Klein driver. Afterwards I found a vertical slot on the outside of my tool bag and mindlessly put it in.
I’m a self confessed tool snob, but damn, that driver is by far my most used tool………………. 😂😂😂
Cool tool finds.
2:25 I have this spanner but it is made by crescent tools and you can get a socket adapter for 1/4 " screwdriver bits and 1/4" & 3/8 socket adapter. Did try and upload a Picture( but the app doesn't support it ) and the guy at work gave me the different adapters from another make, oh maybe that was Sata tools
Love the idea of the lads from Hammerstroke giving tradesmen a way to realise the ideas they have probably had for years
thanks! We love it too!
Trade shows in Germany are always amazing. Loved the Sata socket set with the through ratchet design. Just brilliant
Autoloader looks brilliant, can’t believe that was invented years ago and no big company hasn’t bought into it. Mark seems a very decent bloke tbf
I bought an autoloader from Festool in 2009 and it still works fine. There is a text on the handle "MADE IN CANADA - U.S. AND FOREIGN PATENTS PENDING." I have one for Torx bits and one for Hex bits, very handy. Next time I'd like to go to the Eissenwarenmesser, didn't know it existed ...
yes, it's been out a while. I've had one like 15 years or so. Everyone loves to "borrow" it and I have to go find it. Bought a second one to hide so I didn't have to waste time finding the first one all the time! hehe... but it is handy, you don't lose the bits, and you can pull them out to swap a different one into the rotation. 8^)
The folding ruler is very popular in the nordic countries, in Norway we use it almost exclusively except for longer measurements above 2 meters.
Yeah, he really wanted to promote his tape measure 😂
Meanwhile at the Hultafors booth 23:52
Same in Denmark
I love how the guy selling the 600 euro trowel didn't flinch when you said it was expensive and he just said "Yes" lol
😂 wasn;t much I could say to that really
I can just imagine Dave the bricklayer rocking up on site with his custom engraved £540 Towel, soon lost for ever in the site skip whilst he takes his morning dump in the portaloo
Well it’s handmade Japanese, they can ask for however much they want. Doubt they’ll sell many.
Oh for the days of a canvas bass .... how did we build and lose an empire without all this stuff ?
That is another level of 'tool you hand down for generations'
My 8 year old and I are now obsessed with these trade show videos. Just some great stuff coming out.
That SATA passthrough looks nice, can't find it on Amazon UK at the moment but will keep an eye out for it in the future
Hi maybe I can help , I like you searched Amazon in comes under a different name , type in Crescent CPTAW8 11 piece3-in-1 X6 Pass -Thru £31.44 they also have a bigger set 25 piece CX6PT25 for ££53.06 hope this helps and for anyone else who is interested.
It'1s great fun watching someone who really enjoys tools. Not old tools but new and exciting innovative tools. Keep the videos coming and well done.
Respect for the way your were so friendly and polite even after seeing so many different salesman and not getting snippy or rude despite I suspect getting quite tired.
I would have to say that BMI level/tape measure is the most innovative tool IMHO
I got one of these 4 years ago at the Sandown park show. It doesn't get used very often but useful putting up shelves, mirrors and pictures if I don't have a long level to hand.
Thanks!
No, thank you! What was your favourite tool in this video?
SATA Tools are a secret gem of the tool world. I do precision machining of arms and tools of the trade for some American agencies and use SATA quite often for assembly. Solid tools.
This is the first episode I’ve seen of your show. I like it. A new subscriber and looking forwards to future content.
That little foam chat at 12:48 was really interesting. I was never sure of the differences between your product and everything else, but your explanation was very insightful.
Hi James, I am very glad to hear you say that! I don;t usually bring it up in the videos often because I know not everyone is as interested in foam as I am but I am glad it has resonated with you mate!
Same
Yeahhhh, kaizen is wayyy better than picknpluck, the former lasts forever when taken care of. Picknpluck rots in the sun and just falls apart.
Great video, great content ,love the tools@@ShadowFoam
@@ShadowFoam brother I'm from India im not able to get hands on any of the tools bro maybe you start to sell them here too if we wanna import the shipping cost is more than the actual product cost..
Love the Skil screwdriver and the and the Sata kit.
I believe Crescent has the wrench with pass through sockets as well
I really like the Tough Built line so far. They seem to keep coming up with new ways to make tools more functional at a reasonable price point. Love the Shadow Foam too!!
It’s great to see trade people’s ideas for innovative solutions like the cork warmer.
Would love to see more from the small guy.
Dean from New Zealand
That Sata ratchet is pretty nifty. A great tour and rundown, lots of fun stuff!
Thanks Chris! 👌
Never realised how much I’d enjoy watching someone go around a tool show
It's 11:00 pm (in Australia) and I've discovered this channel. What a tool fair! Some obscure brands I've never heard of that are really the best of the best tools. Tomorrow's going to be a long day watching your videos.
Hi, I have to say that the margin marker is my favourite tool. It maybe a simple thing, but it is amazing how many people notice the exacting margins I have around my door frames,and this will make my life easier having this, amongst all the other freebies.
Quirky Tools: I recently bought a vintage push screw driver. It's basically a manual power screw driver that does not spark. I was excited about it. As soon as it came in my 12 year old daughter snagged it for her own tool box. Now I need to find another vintage one.
Next year you could have a shadow foam road trip and get supports in show reviews, Being a successful company adding unique useful tools sounds a match in heaven 😀 😊
It’s definitely something I want to do more of! 👍
Love the post mate, I normally won’t watch an hour long video but you proved me wrong. Absolutely loved it and didn’t want it to end. Thanks for all your passion. Ps Them Sata sockets look Unbelievable for the price, i can’t comprehend how they can actually make a profit on them for less than £30 …….Keep it up Fella.👍👍👍👍👍❤️❤️
Thanks so much for a look into the show. I'm always interested in how the smaller innovations get into our hands!
Sata tool and the toughbuilt scraper were absolutely my favourites
Man you make tools cool! So good seeing people happy, friendly and giving things away.. made me smile
I'm not even a tradesman but there's something about quirky tools that I love... subscribed!
Great video! Love the Lego pliers.
I’ve always thought tapes could be smaller, good to see someone has eventually sorted it.
I was selling the Autoloader probably 12 maybe 15 years ago, they were supplied by Festool when I was a Festool reseller here in the UK. A great product, they are so good that my daughter and my wife each have their own one in their tool kits. Remember the ladies in your life need a tool kit!
Trade shows like the one in Germany are hard work, yes they can be enjoyable. The hardest show I ever did, working the booth and also going around the halls was the AAW Show in Atlanta Georgia in 2010, which was a four-day show. With the big shows you need at least two days to go around and then a third day to revisit the important booths if you need to tie down business.
For me, the SATA wrench with socket set made a lot of sense but my daughter would go for the Lego set.😊
I love a tool and given our current project of converting our van to a camper I’ve just seen at least three we’d benefit from!! The Canadian screwdriver is genius!
The thing I really liked about the BMI booth is while theyre trying some new stuff.. trying to innovate.. theyre also doing traditional things which I think is cool. And while not every idea is a good idea you still learn something.
I agree, i like the mix of innovation and tradition, you get the best tools that way!
Sata tools have been around on Amazon in the US, for a while.
That type of spline looking socket is made by by many brands, now. I haven’t bought into them yet, but the pass through is get more and more desirable to me.
Looking up the Sata crescent wrench. Sometimes it’s nice to travel with only a few tools to get a lot of jobs done.
ToughBuilt looks nice. Another tool manufacturer I’ll look up.
Still up in the air about the stacking boxes. I carry a canvas tool bag. My drill bit box, 2 cordless, 4 batteries, set of box ends, tape measure, level, bit set boxed, and a standard socket set and ratchet. Covers every thing I need.
No one makes a box 5 inches high, it’s all 6+ inches and will not fit under my truck seat. Width and depth on the systems are good, but all are to tall. My canvas bag stuffs under nicely.
That BMI guy definitely knew what BMI stands for. All bought and paid for.
I also have an addiction with storage boxes, bags, foam, glad I’m not the only one!☝🏻
Love the blade sharpener. Having all the differing angles self contained is awesome!
I wonder if it has a chart inside or inside the lid/flap that indicates what things might have what angles.. or do you just line the edge up with each and find a match? Nice to have choices to get the proper angle!
Its fantastic to see what other countries have to offer. Language barrier does not seem to be a problem in this sector of the market.
Hello there, the tool that interests me the most from this segment would have to be the SATA Universal Driver set, especially the fact that they have the pass through feature on the sockets. Pass through sockets are non-existent in the part of the world where I'm currently working. Super innovative set and well thought through design. Great segment, I really enjoyed learning about the various innovations from the trade show. Thank you
That show looked like heaven we need more like this in the uk and on this scale
as someone just starting out getting a arsenal of tools together i really enjoyed seeing all these tools!
It's always fun noticing metric tape measures when viewing this from the other side of the pond.
Watching these videos is basically a gateway drug for buying more tools. Just ordered the SATA spanner. I have used shadow foam on loads of my tools. Hopefully they do kits for Peli cases in the near future.
Where did you order from? I'm struggling to find it.
Amazon
Also lidl or aldi did the same tool rebadged as there own for £20 so I bought a second one. Exact same tool not a clone.
The love for Zollstocks is infectious
Thanks for the enthusiastic way you present the innovative finds. The white zollstock rulers are like gold dust.
Love the screwdriver quick swap idea, looked much easier than anything I have had in the past.
Fantastic information, your enthusiasm is infectious! 😆 I could spend my life at this Expo. Thanks pal.
Caught one video this morning. Now I'm binge watching while making lists of tools I "need".
Hi, i'm a french viewer of your channel and just loved your tour at this german tool fair !! I think the Sata wrench would be my prefered tool from this stunning list. Keep on making us discover some new and great tools.
Amazing new tools met you at the nec motorsports you show brilliant breakdown and description of tests abilities of tools and shadow foam and your detailed descriptions and decent honest no promos of the tools in the video and funny bmi conversation with the grandson of inventer
I have used that Autoloading screw driver for years. It is a great piece of kit. I caught my first one from Canadian Tire they are now sold through Lee Valley.
Love the idea of you focusing on the smaller tool vendors at tool shows.
Not sure how you did it every time I go to an event at the NEC it knackers me out to think that the expo was bigger would have be bedbound for a few days especially carrying round bags of goodies😂 great video as always👍
Loved most of the top 10. But if I had a choice the Lego pliers to give to my grandson would be great. He loves getting out to the shed and helping grandad. I hope he keeps his enjoyment of working with his hands as he grows up.
Wow. Great to see all the different tools. Going to get me that Sata set. Looks great!
That Stanley knife/scraper is the greatest invention I've ever seen ! . That would be so handy in my line of work .
Definitely a top tool pickup!
Loved the Getta tools screwdriver and Mark seemed like a really decent chap.
Great video but I'm also impressed at just how informative the comments section is! Great job creating a such a cool community and hope we can catch up again at Makers Central!
Thanks for sharing your experiences at the Fair and bringing us another entertaining and informative video. Looking forward to you visiting the Fair next year on an extended trip to explore the products from the smaller manufactures.
My favourites from the were:
- Margin Marker,
- SKIL Electric Screwdriver (volt sensing great idea),
- Sata Universal Driver,
- Autoloader 6-in-1 Multibit Screwdriver - interested in purchasing a couple of these,
- Magnum Easy Grip Pliers
- Proclick Pouch - I'll investigate this line to replace my Toughbuilt "Cliptech" belt and pouches as the suspenders supplied will not connect to the belt, even after communicating with the product manager in the USA they were unable to sort out replacements.
Bolton Tool Fair was enjoyable and picked up a few bargains.
Keep making this great content.
Please enter my name in the draw.
My pleasure John, that’s a good list there! Any cool pickups from Bolton?
@@ShadowFoam , Good prices on Big Wipes, Bosch 12V Jig Saw and Irwin Quick grip clamps. O and the Bacon bun was fine!
Really appreciate your honest and down to earth approach in these videos and first impressions. Keep up the good work!
I’m also heading to my first tool fair in Exeter later this month and I’m keen to know if there are any particularly interesting or quirky tools to keep an eye out for. Any suggestions?
Very much like the BMI stuff. Definitely go back next year!. Thank you for an excellent video.
The OX foldable ruler design, was originally made of wood and brass and was the British joiners standard ruler before the tape measure and was a very versatile measuring rule.
Bought my first Toughbuilt tool earlier this week, it won’t be the last as the quality and innovation is exceptional. 💎
I am so addicted to these videos. Thanks for introducing me to Toughbuilt!
I I'm 16 and just trying to make my collection bigger to I love seeing your videos just to see what you have
Never heard of the flex stuff. Have seen that advert before though.
Another great video. Did wonder if I’d watch it at an hour long but was a good watch and kept it interesting!
That’s a fantastic show with a whole load of innovative tools
I love the idea of the SATA pass through wrench, its simply amazing.
I agree, that's why I bought the Crescent branded set about 5 years ago (they're called X6).
This was presented to me by “the algorithm” and I found it fascinating. I’ve been an aircraft engineer and car/motorbike tinkerer for many years and I do like a nice tool (Missus!). I had no idea just how big an industry it is. I’m aware of quite a few brands but nothing like the amount at that Cologne show. Nice one.
Love toughbuilds products! So jealous of the trip! Number 2. Autoloader looks a great addition to the toolbox! 🤞
Awesome video, interesting tools! On another note the display of the tools behind you on the wall is really nice. Might be looking into doing something like that 😊
just discovered your site and I'm blown away with what you are showing us.
Fantastic session, great insight to who’s leading tool innovation, keep up the great work!
Thankyou for the down to earth way of your presentations. The honest reviews. You I can trust, with your advise, and amazing foam. The tool that took my heart was definitely the Canadian built instant screwdriver bit swap unit. That would definitely find a way into my toolbox, along with the Skil electric screwdriver. Keep up the excellent work.
Tough Built is defiantly favourite, the innovation for the scarper knife and the storage system looks quality.
Great episode. SO good seeing products from brands I wouldn't normally run across
Which tool stood out to you?
Loving the new L Box contractor and Proclick…
I have a skil router setup and love the quality…. That electric screwdriver looks great…. Nice quality…
Loving seeing all these innovative products….👍❤️
I need more tools to keep my school running smoothly….😂😂❤
I love the high visual tape measure is amazing. We need these in America.
Pico do an excellent tape measure with a window on the top and a hole at the hook. You fold out a little pin on the base, put a pencil in the hole, pull the tape until the desired length is displayed in the window, and then you can spin a perfect radius. I use it much more than I thought i would.
Great information given on your product and on different tools that can be purchased.
Looks like a great show, thanks for bringing us along
My pleasure mate, check out the rest of my tool fair videos for more content like this
I have to say going around that exhibition I would have been there for ages. I love ingenious tools. Starting to fall for the toughbuilt bits. Thanks for the great videos and content 👏🏻
Well, you are in luck Mark, because you are one of the winners for this giveaway! We drew the winners in one of our latest videos and your name was picked out fifth! Congratulations, please email my staff at m.wood@shadowfoam.com to organise shipping your prize to you!
Always thinking about real world situations and needs. Love that. Great job.
Definitely "SATA 11 Piece X6 Pass-Thru", already put that in my amazon cart and waiting for the next salary 😅
As for SATA, that's a child company of Gearwrench. I love using their ratchets and spanners. They have won a few of project farm group tests and they are reasonably well priced to boot.
love the show , need to go next year
I would be interested in both seeing more booths in the show next year and would buy the tools if you brought a couple over.
Keep it up, another great vid 👍
Loving what toughbuilt are putting out, fresh ideas are always brilliant. Loving the content keep it up!
I'm here looking into the convention for 2025. Now just to convince the wife.
I'm online pricing that Sata adjustable. Love it.
Haultafors ruler on the way. This episode is costing me a fortune.
Some interesting tools at that show, nicely done video walkaround 🙂
Do like a good tool fair or trade show ! Always good to see new innovations !
Hi, Thank you for a brilliant video, what a great enthusiasm you have for tools! As a keen diyer I love to see new and useful additions to the toolbox. That Cologne tool fair looks awesome. I'm definitely looking into Sata products now, and the Skill driver is great. Best wishes and thanks again
What a great video, so much I didn't know I needed 😂and you are so good when talking with the sellers 👍
Absolutely love your video, all the tools you reviewed and the tools display wall behind.
Tools are pretty addictive especially innovative ones. I loved the pro click system, the l boxx system anf the full OX triple stack setup.
Did I say I’m in love with the display wall behind you 😍
Love the show. Awesome tools! Love the Autoloader 6-in-1 Multibit Screwdriver in particular.
Number 3, Sata, love the multi-tool, a socket that fits any nut and it's fits nuts on a threaded bar. Great looking and practical tool.
Keep up the good work Jonathan. Have been using foam inset tool boxes with the military for years. Just trying to set up my own collection and you keep providing too many options and tools i would like to
I love your shadow foam stuff.
I’d love to be able to make a tool wall for our community workshop with it.
You gotta love a tool show👍👍👍Germany makes great tools with great steel.
I love the adjustable wrench with the sockets that fit into the ratchet at the end, what a cracking idea. Just started getting a few Ryobi items inspired by your shadow board, just need a few more bits and then can get a board made up. Thanks for all the content, great channel and look forward to what’s next.